Funkoverse Strategy Game: Game of Thrones 100 Rulebook

Table of Contents

Table of Contents

• Components
• Understanding Components
  • Character Cards
  • Basic Characters
  • Cooldown Tracks
• Your First Game
  • Setup
  • Example First-Game Setup
• Playing the Game
  • Taking a Turn
  • Ending a Round
  • Doing a Move
  • Doing a Challenge
  • Doing an Ability
• Stop Reading and Play!
  • Winning Your First Game
• The Full Experience
  • Scenarios: Where the Objectives Get Interesting!
  • Scenario Setup
  • Point Markers
  • Winning a Scenario
• Play with Items
  • Item Setup
  • Item Rules
  • Doing the Use-Item Action
  • Items That Have Challenge Actions
• Companions & Mixing Games
  • Companions
  • Companion Setup
  • Companion Rules
  • More Players
  • Mixing Games
• Using the Map
  • Obstructions
  • What Your Character Can See
  • Adjacency
  • Obstructions and Adjacency
• Moving
  • Basic Moves
  • Special Moves
  • How to Move Something
• Challenges
  • Basic Challenge
  • Challenge (Number)
  • Range (Number) Challenge (Number)
  • Defense
  • Resolving a Challenge
  • Knocked Down
  • Knocked Out
  • Multiple Challenges
• Abilities
  • Ability Types
  • Abilities That Are Challenge Actions
  • Traits
• Glossary
• Characters
  • Jon Snow
  • Arya Stark
  • Daenerys Targaryen
  • Night King
  • Basic Characters
  • Minion Tokens
• Items
  • Needle
• Companions
  • Ghost
• Scenarios
  • Infiltrate
  • Triumph

Components

• 4 Characters: Jon Snow, Arya Stark, Daenerys Targaryen, Night King
• 4 Character Bases
• 4 Character Cards
• 4 Basic Characters: Sworn Brother, Stark Soldier, Unsullied, White Walker
• 4 Basic Character Cards
• Arya Stark Status Card (Arya's List)
• 2 Cooldown Tracks
• Double-Sided Map (Winterfell / Godswood)
• 6 Dice
• 8 Ability Tokens
• 8 Exhausted Markers
• First Player Marker
• 4 Point Markers (A, B, C, D)
• 21 Points
• Triumph Marker
• 4 Double-Sided Infiltrate/Leader Markers
• 2 Wight Tokens
• Drogon Token
• Ghost Companion
• Ghost Companion Card
• Needle
• Needle Item Card
• 2 Double-Sided Scenario Cards
• Instructions

Understanding Components

Character Cards

Each character card shows:

• Name — This is your character's name.
• Ability Cost — This shows the type of ability token required to use an ability and where you place it on the cooldown track.
• Abilities — Choose from these abilities when your character does an ability action.
• Defense — The number inside the shield shows how many dice you roll when your character is challenged.
• Trait — This is a rule unique to your character.
• Ability Dots — The colored dots indicate which ability tokens you take into your pool during setup.

Basic Characters

Basic characters are simplified characters you can use until your Funkoverse™ collection grows. They follow the rules for characters, but they do not have abilities or traits, and they cannot hold items. When a basic character is knocked down, flip it over in its square so that the "knocked down" side is face-up.

Cooldown Tracks

Each player has a cooldown track. You'll use it to keep track of when things, such as spent ability tokens and knocked-out characters, return to play after being removed.

At the end of each round, both players shift everything on their cooldown tracks down one number. Things that shift off the 1 return to play. When shifting off the cooldown track, characters return to your starting area, ability tokens return to your ability token pool, and item cards return to the characters holding those items. This will be explained in more detail in other sections of these instructions.

Your First Game

Welcome to Funkoverse! For your first game, jump in as quickly as possible. To help with this, these instructions are organized so you don't need to read everything to get started. Once you get to Stop Reading and Play! (page 7), you'll know enough of the basics to start playing!

First-Game Objective: Knock down an opponent's character, and then knock out that character to score a point. Score three points to win!

Setup

1. Set aside the Ghost companion token, Needle, companion card, item card, cooldown tracks, and scenario cards. You won't use them in your first game; you'll learn how to use them in The Full Experience (page 8).
2. Place the map with Winterfell face up.
3. All players will use the dice and points. Place them beside the map.
4. Each player takes two exhausted markers.
5. Each player takes a base color and the basic character that matches that base color.
6. Each player chooses a character and puts that character on their base. Your two characters are allies. Your opponent's characters are your rivals.
7. Each player takes the cards for their character and basic character, and any tokens or status cards belonging to their character. Tokens and status cards are used by some characters for their abilities. See Components (page 2) for a list of which components belong to characters.
8. Your character cards have colored dots in their bottom right corners. Take one ability token to match each colored dot. Combine all your ability tokens into your ability token pool.
9. Randomly determine who goes first, and give that player the First Player marker.
10. The Winterfell starting areas are marked with base colors on the next page. The player with the First Player marker places their characters on squares in their starting area. Then, proceeding clockwise, the other players place their characters in their starting areas. When using the Winterfell map, the cooldown track nearest your starting area is yours.

Example First-Game Setup

• Night King player: White Walker Card, Night King Card, two Wight Tokens, exhausted markers, an ability token pool of one cunning token and one leadership token, and a cooldown track.
• Arya Stark player: Stark Soldier Card, Arya Stark Card, the Arya's List status card, exhausted markers, an ability token pool of one cunning token and one might token, and a cooldown track.
• Daenerys Targaryen player: Unsullied Card, Daenerys Targaryen Card, the Drogon token, exhausted markers, an ability token pool of one leadership token and one might token, and a cooldown track.
• Jon Snow player: Sworn Brother Card, Jon Snow Card, exhausted markers, an ability token pool of two might tokens and one leadership token, and a cooldown track.

All players also share the dice and points, and place their characters in their starting areas on the Winterfell map.

Playing the Game

Proceeding in clockwise order, players take turns choosing a character to do actions. When all characters have gone, the round ends, and a new round begins.

Taking a Turn

1. Choose a Character — Choose one of your characters without an exhausted marker. (No characters have exhausted markers at the start of the round.)

2. Do Two Actions — Do up to two actions with your chosen character. Actions can be basic or special, and a character may do the same action twice. If the character you've chosen to act is knocked down, see Rally (step 3) below.

   Basic Actions (all characters can do these actions)

   • Move — Move up to 2 squares in any direction.
   • Basic Challenge — Roll 2 dice to challenge an adjacent rival.
   • Assist — Stand up an adjacent ally that has been knocked down.
   • Interact — This action is not used in your first game. You'll use it in scenarios.

   Special Actions (all characters except basic characters can do these actions)

   • Ability — Spend an ability token to do an ability by placing it on your cooldown track on the number matching the ability's cost.
   • Use Item — This action is not used in your first game. Some items require an action to use.

3. Rally — If the character you've chosen to act is knocked down, the character cannot do the actions above. Instead, they can stand up by using both of their actions.

4. Exhaust Your Character — Place an exhausted marker on the character card of the character you chose. This character cannot take another turn this round. Once you exhaust a character, it's the next player's turn.

5. Next Player Takes a Turn — The next player follows the steps listed above, beginning with Choose a Character.

Ending a Round

When each player has exhausted all their characters, the round ends.

Cooldown. Beginning with the player with the First Player marker, each player shifts everything on their cooldown track down one number. Things that shift off the 1 return to play. After shifting off the cooldown track, characters return to your starting area, ability tokens return to your ability token pool, and item cards return to the characters holding those items.

Refresh. Remove the exhausted markers from all character cards.

New First Player. Pass the First Player marker to the next player. That player starts the next round by taking a turn with one of their characters.

Doing a Move

When you move a character, you may move it straight into the next square or diagonally. However, you cannot move through standing rivals or obstructions. See Moving (page 14) for the complete move rules.

Doing a Challenge

Challenges allow you to knock down and knock out rivals. Remember that every character may do a basic challenge against adjacent rivals.

When you challenge a rival with a basic challenge, roll 2 dice. When using an ability to challenge, you roll a number of dice equal to the number that follows "challenge". Your opponent then rolls a number of dice equal to their target character's defense, which is the number inside the shield on that character's card.

You want to get more successes than your opponent.

• As the challenger, you get 1 success for each success icon and 3 successes for each critical-success icon.
• Your rival gets 1 success for each success icon and 3 successes for each critical-success icon.

If you have more successes than your rival, your character wins the challenge, and your rival loses. If you do not, your character loses the challenge. Unless otherwise specified by an ability, nothing happens if there is a tie or if the challenger loses the challenge.

When a standing rival is challenged and loses the challenge, the rival is knocked down. Tip the character over in the square where they stood. If a rival that is knocked down is challenged and loses, the rival is knocked out. Remove the character from the map and place the character on the 1 of that player's cooldown track. See Challenges (page 16) for the complete challenge, knocked down, and knocked out rules.

Doing an Ability

When a character does an ability action, follow these steps:

1. Choose an ability from that character's card.
2. Spend an ability token of the appropriate type from your pool to pay the ability's cost, placing it on your cooldown track on the number shown in the ability's icon. If you do not have the appropriate ability token available in your pool, you cannot use the ability.
3. Follow the rules of the ability in the order written on the card. See Abilities (page 11) for the complete ability rules.

Stop Reading and Play!

The above rules cover what you need to know to start playing your first game! When you try to do something you have not done before, or you have a question about how something works, refer back to these instructions or read the detailed sections that follow.

Winning Your First Game

For your first game, collect one point each time you knock out a rival character or when one of your characters is adjacent to a rival when they are knocked out. Continue playing until one player has collected three points or until each player understands the rules of the game. After that, keep reading to learn how to play through the full Funkoverse experience by using scenario cards, items, companions, and by mixing games!

The Full Experience

Now that you've played your first game, you're ready for the full Funkoverse experience! You can also take it to the next level by mixing Funkoverse games or playing against a friend who has their own Funkoverse game!

Scenarios: Where the Objectives Get Interesting!

Each Funkoverse game comes with a double-sided map and two double-sided scenario cards. Scenarios are associated with specific maps, and each combination provides a unique way to play the game and new strategies to explore!

When you play a scenario, use the Playing the Game (page 6) rules. Instead of winning by knock out, you play to gain points. Each scenario describes different ways players can gain points.

Scenario Setup

1. Agree on a map and one of its associated scenarios. Place the point markers on the setup squares, as shown on the scenario card.
2. All/each player will use dice and points. Place them beside the map.
3. Each player uses a cooldown track.
4. Each player picks a base color. Flip the First Player marker. If the side matching your base color lands up, take the First Player marker and place it in front of you.
5. Each player chooses a character and takes the basic character matching their base. (If you are mixing Funkoverse games or are playing against a friend who has their own Funkoverse game, choose three characters and one item each. If both players have Funkoverse collections, choose characters and items in secret.)
6. Take the character cards, item card, and any status cards or tokens associated with your characters. Each player takes one exhausted marker for each of their characters.
7. Your character cards have colored dots in their bottom right corners. Take one ability token to match each of the colored dots. Combine all your ability tokens together to form your ability token pool.
8. Check the scenario card for additional setup rules.
9. Your starting area is marked with your base color on the map on the scenario card. The player with the First Player marker places their characters on squares in their starting area. Then, the other player places their characters in their starting area.

Point Markers

In addition to the ways to gain points described by scenarios, players may always gain extra points from point markers. When a character is adjacent to a point marker on the map or in its square, the character may do the interact action to immediately gain a point. Place the point marker, letter-side up, on the 4 of their cooldown track. When a point marker shifts off a cooldown track, place it back on the map in the corresponding letter's setup square. In subsequent turns, players may gain points by interacting with point markers that have returned to the map.

Winning a Scenario

Determine the winner according to the scenario's rules by counting the points each player has at the end of a round. If there is a tie, play more rounds until one player has more points. If you run out of points to take, use something else to keep track of the points each player gains.

Play with Items

This game contains an item, Needle, that you can use when mixing Funkoverse games or playing against a friend who has their own Funkoverse game. Both players must have an item before you can play with an item. Try using items with different characters and with different combinations of characters on your side to discover new strategies. Both players must use the same number of items.

Item Setup

Each player chooses one item and gives it to a character by putting it in that character's hand before starting the game. Place the item card near that character's card to remind you of the rules. Basic characters cannot be given items.

Item Rules

When a character has an item, the character gains a new option for an action or a new trait as described on the item card. Read the rules as you would for an ability. An item remains with the same character for the whole game.

While an item is on the cooldown track, it cannot be used. When a round ends, shift all item cards down the cooldown track. When an item card shifts off the 1, it returns to the character holding the item and may be used again.

Doing the Use-Item Action

If the item has the ability-cost icon, the character holding the item must do the use-item action to use it. After your character uses the item, place the corresponding item card on the cooldown track on the number indicated in the icon.

If the item does not have the icon, the item functions as a character trait and does not require an action to use.

Items That Have Challenge Actions

Some items provide a way to challenge targets, but doing the use-item action is only considered a challenge action if it has a star icon after the item name. Otherwise, it is considered a non-challenge action.

Companions & Mixing Games

Companions

Companions are a new addition to the Funkoverse and may be used by a player instead of an item! Companions are always paired with a character and provide a player with an ally that can do a limited number of actions.

Companion Setup

When playing with a companion, the companion is always paired with a character on your team. Attach the companion to a character by placing the companion card below that character's character card. At the beginning of the game, and whenever a companion shifts off the cooldown track, place the companion token in your starting area.

Companion Rules

Companions follow the same rules for adjacency, movement, and what they can see as characters. When a character with an attached companion takes their turn, the attached companion may also do one of the actions listed on the companion's card.

Additionally, a character with an attached companion may forfeit any number of their actions on their turn to allow their attached companion to do that many actions, selected from the actions listed on that companion's card. This may be done while the character is knocked down, and even while the character is on the cooldown track!

When a companion is challenged and loses, remove it from the board and place it on the 1 of its owner's cooldown track. Players do not gain points from challenging companions. For the purposes of gaining points, when a companion knocks out a rival, credit the knockout to the character the companion is attached to.

More Players

This game contains two new Free-for-All scenarios specifically designed for three or four players! (Triumph and Infiltrate) In Free-for-All scenarios, each player controls their own characters. When playing with more than two players in a Free-for-All scenario, the first player marker is passed clockwise at the end of the round. Every other player is considered your opponent, and all of their characters are considered your rivals.

You can also play regular Funkoverse scenarios as a team game! Play the game with one or two players per side and with each player controlling at least one character. Each side works as a single player as described in the rules. Players on the same side are allies just as if they were controlled by a single player. Players of the same side use the same cooldown track and ability token pool.

Mixing Games

Choose characters, items, and scenarios from any Funkoverse game and mix them up to discover powerful character combinations and to devise new strategies. Pit your collection against your friend's collection to see who can make the best combination.

If you and your opponent have the same game, everyone can play with their favorite characters. If you play with more than one Funkoverse game of the same type, characters with the same name cannot be allies. (Arya cannot ally with another Arya.)

A recommended game of Funkoverse uses three characters and one item per side, but you can experiment with more items and more characters as your collection grows!

Using the Map

The map that comes with this game has Winterfell on one side and the Godswood on the other. Each side is unique, and the position of obstructions changes how games are played.

Obstructions

Obstructions on each side share the same appearance. Other objects on the map are not obstructions. An obstruction on the border between otherwise adjacent squares is a "wall". If an area of the map is fully surrounded by an obstruction, it cannot be entered for any reason.

What Your Character Can See

When determining if your character can see a square, draw an imaginary line from the center of your character's square to the center of the square in question. Then, use the following rules:

• Rule 1: If an obstruction interrupts this line, your character cannot see that square.
• Rule 2: If the line passes through any part of a square occupied by a standing rival you can see, your character cannot see past that rival's square.
• Rule 3: If the line passes through any part of a square occupied by an ally, your character can see past that ally's square.
• Rule 4: If the line passes through where four corners meet, and your opponent's characters occupy one or two of those squares, your character can still see past that corner.

Adjacency

In Funkoverse a square is adjacent if it is straight beside or diagonal to your character and your character can see that square.

Obstructions and Adjacency

If an obstruction is between your character and another square, your character cannot see that square and is therefore not considered adjacent. This includes obstructions on the corner of squares blocking diagonal adjacency.

Moving

When you move something (such as a character or a token), you may move it straight into the next square or diagonally.

Basic Moves

If a character moves by doing a basic action, the character can move up to 2 squares.

Special Moves

If something moves because of an ability, trait, or item, it is a special move. You can move it up to the number of squares specified by the ability, trait, or item.

How to Move Something

When moving something, use the following rules.

• Rule 1: You cannot move things through obstructions.
• Rule 2: You can move something into a square partially occupied by an obstruction but only if the obstruction does not occupy the center of the square.
• Rule 3: If an obstruction is on a corner of a square, you cannot move something diagonally through that corner.
• Rule 4: You can move something through a square occupied by one of your allies.
• Rule 5: You cannot move something through a square occupied by a standing rival.
• Rule 6: You cannot end something's move in a square occupied by an ally or rival.

Challenges

The rules provide many ways to challenge targets. Usually your target is a rival, but you might target other things, such as tokens. Unless a rule says otherwise, you challenge only one target at a time. You cannot challenge an ally.

Basic Challenge

A character doing a basic challenge rolls 2 dice and must be adjacent to their target.

Challenge (Number)

The word "challenge" followed by a number means you challenge an adjacent target. Roll the number of dice equal to the number that follows "challenge."

Range (Number) Challenge (Number)

The word "range" followed by a number means the target must be within that number of squares. The challenger must be able to see the target. Roll the number of dice equal to the number that follows "challenge."

Defense

The number inside the shield on the target character's card shows how many dice the defender rolls when that target is challenged. Tokens that you can challenge show their defense on the token.

Resolving a Challenge

Declare your target and roll a number of dice as specified by the rules for your challenge. Your opponent then rolls a number of dice equal to the target's defense.

• You want to get more successes than your opponent.
• As the challenger, you get 1 success for each success icon and 3 successes for each critical-success icon.
• Your rival gets 1 success for each success icon and 3 successes for each critical-success icon.

If you have more successes than the defender, your character wins the challenge. If you do not, your character loses the challenge. When you challenge and lose, nothing happens.

Knocked Down

If a character that is standing is challenged and loses, it is knocked down. Tip the character over in the square where the character stood. (When a basic character is knocked down, flip it over in its square so that the "knocked down" side is face up.) A character that is knocked down cannot use actions, but can rally. However, another character can do the assist action to stand that character up. See Assist and Rally (page 6).

Knocked Out

If a character that is knocked down is challenged and loses, it is knocked out. Remove the character from the map and place the character on the 1 of their player's cooldown track. A character that has been knocked out and is on the cooldown track can still be chosen to take a turn and become exhausted; however, they may not do any actions. In some instances, it might be beneficial to delay taking a turn with a character in play; choosing to take a turn and exhaust a knocked-out character allows you to do this.

Multiple Challenges

Some abilities allow a character to challenge more than one target. Declare and resolve each challenge one at a time. Make separate challenge rolls for each target, whether you are challenging multiple targets or a single target more than once. The defender rolls dice to defend for each challenge as it is declared and made.

Abilities

When you choose to have a character do an ability action, follow these steps:

1. Choose an ability from that character's card.
2. Spend an ability token of the appropriate type from your pool to pay the ability's cost, placing it on your cooldown track on the number shown in the ability's icon. If you do not have the appropriate ability token available in your pool, you cannot use the ability.
3. Follow the rules of the ability as written on the card.

If the ability has multiple rules, follow the rules in sequence. If the ability contains a challenge and the challenge cannot be done because there are no possible targets, the ability ends and the remaining rules for the ability are ignored.

When ability rules conflict with the rules written in the instructions, the ability rules take precedence.

Ability Types

There are a variety of types of abilities in Funkoverse. The characters in this game use three of the ability types. Other games have characters that use different combinations of ability types. Each ability type is associated with various qualities:

• Finesse (blue swirl icon) — Characters with these abilities exhibit finesse, agility, and coordination. Such abilities often provide ways for characters to be faster or more flexible.
• Might (red triangle icon) — Characters with these abilities exhibit forcefulness, strength, and fortitude. Such abilities often provide ways for characters to be mighty or more resilient.
• Cunning (grey gear icon) — Characters with these abilities exhibit cunning, ingenuity, and deception. Such abilities often provide ways for characters to trick or inhibit rivals.
• Leadership (yellow banner icon) — Characters with these abilities exhibit leadership, charisma, and willpower. Such abilities often provide ways to bolster allies or give them actions.

Abilities That Are Challenge Actions

Many abilities let you challenge targets, but doing the ability action is only considered a challenge action if it has a star icon after the ability name. Otherwise, it is considered a non-challenge action.

Traits

The rules explained for abilities also apply to traits. However, you do not need to spend an ability token to use a character's trait. Instead, it applies all the time. Unless the trait says otherwise, its rules also work when a character is knocked down or knocked out.

Glossary

This glossary includes terms used throughout all Funkoverse games. Some terms do not apply to characters in this game (GOT100). Terms not used in this game are marked with an asterisk (*).

• *Adding Range: When a rule adds range, the squares you count for a ranged challenge increase by the stated amount. If you add range to a challenge that is not ranged, it becomes a ranged challenge with a range equal to the number stated plus 1.

• Ally: The characters and minion tokens you control are allies. If you play with three or four players, characters and minion tokens controlled by players of the same side are allies to each other.

• *Away: Some abilities specify moving something away from something else (sometimes written as "push"). When moving something away from something else, you move it up to the stated number of squares according to the Moving rules (page 14), except that each square to which you move it must be farther away.

• Challenge Actions: An action is considered a challenge action if it is a basic challenge or it has a star icon after the ability or item name. If there is no possible target, you cannot do a challenge action.

• *Controlling a Rival: A rule might specify that you control a rival. When you have that rival do actions, treat the rival as allied to your character rather than your opponent's character when doing moves and challenges and when determining what the rival can see.

• Cost: When a character does an ability, the cost is the number in the ability icon next to that ability's name. This shows where on the cooldown track to place the matching ability token.

• *Decreasing an Ability Cost: A rule might decrease the cost of an ability. When that happens, place the ability token on the number of the cooldown track that corresponds with the new number. If the cost is decreased below 1, an ability token is no longer required to use the ability.

• Discard a Status Card: When you discard a status card, it is taken from the character it was given to and becomes available to play again.

• Free-for-All: Free-for-All is a type of scenario specifically designed for multiplayer play. In Free-for-All scenarios, each player controls their own characters. When playing with more than two players in a Free-for-All scenario, the first player marker is passed clockwise at the end of the round. Every other player is considered your opponent, and all of their characters are considered your rivals. Infiltrate and Triumph are Free-for-All scenarios.

• *Increasing an Ability Cost: A rule might increase the cost of an ability. When that happens, place the ability token on the number of the cooldown track that corresponds with the new number. If the cost is increased above 4, place the token on the 4 instead.

Characters

Jon Snow

Defense: 2

Abilities:

• Wild at Heart (cost 3, might, challenge action) — Move 3. This action may move Jon through rivals. You may do a challenge 2 against a rival controlled by a player with more points than you.
• Longclaw (cost 2, might, challenge action) — Challenge 3.
• Chosen Leader (cost 3, leadership) — Each adjacent ally may do a basic challenge or assist action. Limited to once per turn.

Trait — Blood of Wolf and Dragon: While standing, when Jon or an adjacent ally challenges a rival and wins, you may shift a might or leadership ability token on your cooldown track down 1. Limited to once per turn.

Arya Stark

Defense: 2

Abilities:

• Water Dancing (cost 2, cunning, challenge action) — Move 1. Challenge 2. Move 1.
• Valar Morghulis (cost 3, might, challenge action) — Challenge 3, or challenge 6 against the rival with the Arya's List status card.
• Faceless Assassin (cost 3, cunning, challenge action) — Place Arya adjacent to a rival within 4 squares. If that rival has the Arya's List status card, do a challenge 2 to them.

Trait — Arya's List: When a rival character challenges Arya or one of her allies, you may give that rival the Arya's List status card or move the Arya's List status card to that rival.

Arya Stark Status Card — Arya's List: When Arya knocks this character out, she may do a basic action. Discard this card when this character is knocked out.

Daenerys Targaryen

Defense: 2

Abilities:

• Liberator (cost 2, leadership) — Daenerys may do an assist action. An adjacent ally may do a basic action.
• Dragon Rider (cost 1, leadership) — Move the Drogon token 2 squares. If the Drogon token is within 2 squares of Daenerys, you may place Daenerys in the Drogon token's square.
• Dracarys (cost 3, might, challenge action) — Move the Drogon token up to 4 squares in a straight line. Do a challenge 3 to rivals moved through. Limited to once per turn.

Trait — Mother of Dragons: At the beginning of Daenerys' turn, move the Drogon token up to 4 squares in a straight line or place the Drogon token adjacent to Daenerys. Whenever the Drogon token moves, it may move through rivals and obstructions.

Night King

Defense: 2

Abilities:

• Ice Spear (cost 3, cunning, challenge action) — Range 4, challenge 3.
• Raise the Dead (cost 1, cunning) — Place a Wight minion token in an empty square adjacent to the Night King.
• Dreadful Command (cost 2, leadership) — Each Wight minion token does a move 2 and then a challenge 1.

Trait — Winter Is Here: When the Night King becomes exhausted, each Wight minion does a move 2 or challenge 1. When another character is knocked out, place a Wight minion token in an empty square adjacent to the Night King.

Basic Characters

Sworn Brother / Stark Soldier / Unsullied / White Walker (Defense 2)

• Move — Move up to 2 squares.
• Challenge (challenge action) — Roll 2 dice to challenge an adjacent rival.
• Assist — Stand up an adjacent ally.
• Interact — This action differs depending on the scenario.
• Rally — Use two actions to stand up.

Minion Tokens

• Wight Token (Defense 0) — Placed and moved by the Night King's Raise the Dead and Dreadful Command abilities and Winter Is Here trait.

Items

Needle

Item card ability — When this character does an ability, you may increase a challenge or move on that ability by 1. If you do, place Needle on the 2 of your cooldown track.

Companions

Ghost

Move — Move up to 2 squares.

Bite (cost 1, challenge action) — Challenge 2.

Trait — Loyal Protector: When the character Ghost is attached to is knocked down, you may place Ghost adjacent to them.

Scenarios

Infiltrate

Map: Winterfell

The battle of Winterfell's initial assault has been exhausting on all sides, forcing you and your rivals into defensive positions. Defend your position from rivals while sending your remaining forces to catch them off guard.

Setup: See Scenario Setup in the instructions. Each player places an infiltrate marker on the indicated space in their starting zone.

Rules: When a character is on or adjacent to a rival's infiltrate marker, the character may do an interact action to score it. When they do, place the infiltrate marker on their owner's cooldown track as shown, and return the character to its starting area.

When an infiltrate marker shifts off a cooldown track, place it back on the map in its corresponding setup square. In subsequent turns, players may interact with infiltrate markers that have returned to the map.

Gaining Points:

• If a character returns to your starting area using the rule above, gain 1 point.
• If you knock out a rival or have a character standing adjacent to a rival that is knocked out, gain 1 point.
• If you interact with a point marker, gain 1 point. See Gain Extra Points/Point Markers in the instructions.

Winning: If playing with two characters per side, gain 6 points to win. If playing with three characters per side, gain 10 points to win.

Triumph

Map: Winterfell

The long night is cold and relentless. Winterfell is in turmoil from the chaos of combat. Stay vigilant and hold the courtyard at all costs to ensure the battle will be victorious.

Setup: See Scenario Setup in the instructions. Place the triumph marker as shown.

Rules: If a character knocks out a character on the triumph square, place that character on the triumph square.

Gaining Points:

• If one of your characters is on the throne square at the end of the round, gain 1 point.
• If you knock out a rival or have a character standing adjacent to a rival that is knocked out, gain 1 point.
• If you interact with a point marker, gain 1 point. See Gain Extra Points/Point Markers in the instructions.

Winning: If playing with two characters per side, gain 6 points to win. If playing with three characters per side, gain 10 points to win.

Infiltrate and Triumph are both Free-for-All scenarios designed for three or four players. See More Players in the instructions.