World At War 85: Storming the Gap – The Drive On Giessen thumbnail

World At War 85: Storming the Gap – The Drive On Giessen

World At War 85: Storming the Gap – The Drive On Giessen Rulebook

Table of Contents

Table of Contents

1.0 Introduction

The Drive on Giessen is a campaign game for WaW85 that allows the play of a set of linked game scenarios depicting a Soviet division's drive across West Germany against NATO forces.

2.0 Overview

The Operational map will depict an area roughly from Eisenach GDR to Giessen FRG; a distance of about 75 kilometers in depth and 20 kilometers wide. The Pact player will have forces equivalent to about one division, while the NATO players will have at command a reinforced brigade.

The Operational map will consist of a series of locations connected across the map. Each location will represent a game area of two maps where each scenario will be played. Links between these map locations will represent road connections which will regulate how many game formations will be able to transit during each operational turn.

The campaign game will consist of three Campaign days. Each campaign day will consist of four Operations turns – early morning, late morning, afternoon, and evening. At the end of each campaign day there will be a night turn in which each player will conduct admin activities such as taking replacements, checking for reinforcements, and other events that may impact the campaign. A player may under certain circumstances also declare a special night Operational turn.

During the Operational Turn, both players may move their formations on the Operational Map. Units are moved point-to-point to any adjacent location. This is done secretly, without the other player seeing. Formations that have not moved may improve their defensive positions instead, or regroup. Most formations can move one space per turn; formations in road formation may move two. Helicopter formations may move four spaces, but must return to the location they started from (their Forward Operating Base) at the end of the turn.

Battles will occur at each location that contains forces of both opposing players. How the forces arrived on the map will determine how the scenario will be set up. As battles occur, both sides may have reinforcements that can move into battle from adjacent locations. Also, artillery units in adjacent locations may be assigned as Artillery Support, and so act as off-board artillery for the battle.

3.0 Victory

The victor will be determined by the number of NATO objective locations (blue locations on the Campaign map) that the Soviets capture over the course of the three campaign days.

The Soviets win if they control two of the three blue objectives and can trace a line of communication of friendly controlled locations back to a friendly red starting location.

4.0 Components

In addition to the rules presented in this booklet, components for this module consists of:

  1. Two identical 8.5x11 Operational Maps including your Operational holding boxes.
  2. Two identical 11x17 Player aid cards/blinds.
  3. 88 Campaign-game specific markers (one counter sheet). Red markers are for use on the Pact Operational map; blue markers are for use on the NATO Operational map. Other markers are used as indicated in these rules:

The booklet illustrates the campaign markers as follows: Air Recon (Red), Air Strike (Red), Air Recon (Blue), Air Strike (Blue), Battle, Day, Operational Turn, Battlefield Control (Red), Battlefield Control (Blue), Road March (Black), Engaged! (Red), Engaged! (Blue), Forward Operating Base (Red), Forward Operating Base (Blue), and Fire For Effect markers (4).

  1. What you will need from your WaW85 game: a. Objective markers of both sides. b. Improved Position and Minefield-Placed markers. c. Your National Unit Table player aid cards.

5.0 Campaign Set up

  1. Each player should take an 8.5x11 Operational map. Place the Operational map behind the 11x17 Player aid card/blind so your opponent cannot see your Operational map.
  2. Choose who will be the NATO and who will be the Pact forces in the Campaign.

5.1 Construct the NATO Forces

The NATO player may spend up to 1200 points to construct his force (the NATO player should consult page 4 of the National Unit Tables for each NATO nationality desired to be included in the campaign, to find the points values of their formations, HQs and any attachments):

a. An HQ of the same color as the formation must always be purchased, though any Morale/Training level may be purchased. (Any color formation HQ may be used when building a Scratch Force). b. Each Formation receives one formation card of a color band that matches its HQ (or one scratch force card to use with any color HQ units). c. If you take two cards, multiply the total point cost of the formation's units and attachments by 1.25. d. If a CAS unit is purchased, take two Air Strike markers to be used in the Operational turns. Place them in the Operational Holding box on their map. e. If a Helicopter formation is purchased, take two NATO (blue) Forward Operating Base markers.

5.2 Construct the Pact Forces

The Pact player may spend up to 1700 points to construct his force (the Pact player should consult page 4 of the National Unit Tables for each Pact nationality desired to be included in the campaign, to find the points values of their formations, HQs and any attachments):

a. Each Formation receives one formation card of a color band that matches its HQ (or one scratch force card to use with any color HQ units). b. If you take a Designated Formation card, it costs 300 points. c. If a CAS unit is purchased, take two Air Strike markers to be used in the Operational turns. Place them in the Operational Holding box on their map. d. If a Helicopter formation is purchased, take two PACT (red) Forward Operating Base markers.

Design Note: All of the above are just starting suggestions for you. Feel free to adjust these points values and CAS assignments as you see fit. Have fun!!

5.3 Set up your HQs on your respective Operational maps

The Pact player places any number of its purchased HQs anywhere inside any location boxes indicated as a PACT starting location on the Pact Player's Operational map. The NATO player places any number of its purchased HQs anywhere OTHER THAN any location boxes indicated as a PACT starting location on the NATO Player's Operational map.

Helicopter HQs are represented by any one Helicopter unit from the formation, and are referred to in the rules here as "Helicopter" rather than HQ. (But remember: all of the formation's unit counters are used in any Battle generated on the Operational Map.)

Each Side places their five Air Recon markers in the Holding box for later use.

Each side with FOB markers places each FOB marker in any friendly location. FOBs move like an HQ during the game, but are immediately eliminated if in a location with an enemy HQ.

You are now ready to play!

6.0 Sequence of Play

The sequence of play for an Operational turns will be as follows. Step 1 is conducted simultaneously by both players. Steps 2-7 are conducted in order. Finally, Steps 8-9 are conducted simultaneously by each side.

  1. Both players simultaneously place any Air Recon markers from their respective Operational Holding Boxes on any location on their own Operational Map. Once all are placed for both sides, and in any agreeable order, resolve Air Recon of each location by rolling on the Air Recon Table. See 7.3 Air Recon (Reconnaissance).

  2. The PACT player, selecting one HQ, FOB or Helicopter formation at a time, moves that HQ per the Operational movement rules. See 7.0 Operational Map Movement. After each location of movement, resolve control of the box moved into:

    a. If the location is controlled by the PACT player, nothing else happens; proceed to the next box or next HQ, FOB or Helicopter the moving HQ, FOB or Helicopter's move is finished.

    b. If the location is not controlled by the PACT player, the NATO player now confirms if there are any NATO HQs, FOBs or Helicopters in the location. If not, place a red Battlefield Control marker on the PACT map to indicate control. If there are NATO units in the location, each player places a Battle marker on the location on their own maps. The moving HQ, FOB or Helicopter is done moving and any FOBs are removed to the Holding Box as destroyed. They are out of the game.

  3. Once all desired PACT HQs have moved, any HQs which have not moved and are not in a location with either a Battle Marker or an Engaged! Marker may add one Improved Position and one Minefield-Placed marker (use markers from your WaW85 game, as needed) to their location on their map. See 7.2 Engineering.

  4. Now the NATO player now moves the NATO HQs, FOBs and Helicopters by repeating steps 2 and 3 above, but on its map and reversing roles in each step with the PACT player.

  5. A battle occurs in any location where both players have HQs. Use a Battle marker to indicate that location on both players' respective maps.

  6. Place Air Strike markers in locations where you wish Close Air Support to be used in the battle. You will add in any or all purchased CAS cards and counters to the battle in that location, as usual. Alternatively, you may place an Air Strike marker in an enemy location where there is no battle and resolve an Air Strike. See Air Strike Resolution below, and resolve those Air Strikes.

  7. Starting with the Pact player; players alternate choosing which battles to resolve. Assign Artillery Support for each battle, if available in an adjacent location. See Artillery Support below.

  8. After each Battle: Post-battle positions are determined; mark each location you Control after each battle with one of your side's Battlefield Control markers; helicopters return to their Forward Operating Bases; air units return to their holding box; and both sides roll for Replacements.

  9. Once all battles for the current Operational turn are completed, the Operational turn is over. Evaluate Victory if it is the last turn of the Campaign; otherwise begin the next Operational turn.

7.0 Operational Map Movement

Designate any friendly HQs or stacks who intend to use Road March with a Road March marker. Then each side will move formations on their own copy of the operational map, by advancing their Formation HQs or stacks across the map from box to box using Standard movement, or to the first location of a Road March.

Once each HQ has moved, check to see whether moves into an enemy-held location result in a change of control, or a battle.

If a formation in Road March has entered a space and there is no enemy, it may move onto its second location.

After they move to their second location, resolve those moves as well for change of control or battles. Once all locations are resolved for change of control or for battles, Operational Movement for this Operational turn ends.

  1. An HQ stops movement upon entry of a location that contains enemy forces.
  2. Standard movement is 1 location.
  3. Road march is 2 contiguous, connected locations.
  4. Helicopters can move 4 contiguous, connected locations.
  5. Major road capacity is 3 HQs.
  6. Minor road capacity is 1 HQs.
  7. Formations which are over the capacity of a specific road may still use the road, but enter as reinforcements if entering a battle.
  8. Helicopter formations do NOT count against road capacity.

7.1 How movement affects battle setup

  1. Standard movement – units enter anywhere along the appropriate entry map edge.
  2. Road march – your units must enter unstacked along an appropriate road; each unit's MPs are reduced by # of units that entered immediately prior or in the same Formation Activation. Your units must remain on the road until any of your moving units enters a hex in the LOS of an enemy unit.
  3. Reinforcing formations (those above road capacity attempting to enter the location on the Operational Map) enter on an appropriate starting on turn 4, limited to one formation per turn.

NOTE: If a formation's activation is skipped on the turn of entry, this delays all following formations as well!

7.2 Engineering

Formations that do not move during the current operational turn may gain one Improved Position counter and one Minefield-Placed marker, available to be deployed in any battle in that location starting with the next Operational turn. Each Operational turn the formation remains stationary allows an additional Improved Position and Minefield-Placed marker, up to a maximum of 4 of each type for NATO companies, or 10 for Pact Battalions. If a formation moves from a location, all accumulated Improved Position and Minefield-Placed markers are lost.

7.3 Air Recon (Reconnaissance)

Each side will start with five Air Recon. These begin the game in your side's HQ/SW Ready To Be Deployed Holding Box on the OPERATIONAL Holding Box card that comes with your WaW85 game. Your Air Recon markers are available to be placed in locations each turn to determine what, if any information can be gleaned about enemy formations that are potentially in that location.

Each Air Recon marker, once placed, will roll once per Operational turn on the Air Recon Table to determine results. The Air Recon Table is also located on your each player's 11x17 Campaign aid/blind.

Air Recon Table

Die RollResults
1# of formations and type (infantry/armor/artillery), presence of improved positions
2# of formations present
3Presence of enemy formations and whether they include armor formations
4Presence of enemy reported, no other in-formation
5Air recon aborted, no report
6Air recon shot down by air defense, no report

Air recon units shot down are placed in the Casualty holding box of their side. Air recon units that are not shot down are placed back in the HQ/SW Holding box of their side, for use during the next Operational turn.

8.0 Battle Set Up

  1. Maps are laid out. If not pre-assigned, two specific maps are determined randomly and laid side by side along their long edge (the resulting map area will then be 22 hexes by 26 hexes).

  2. Pick one of the long sides (26 hex sides). Roll 1d6: 1-3 it is the north edge; 4-6 it is the south edge. Place the North marker as appropriate.

  3. After the maps are placed, objective markers are then placed on the map (use the Objective markers from your WaW85 game). Control of the objectives determines who controls the location at the conclusion of the battle (this is important for Replacements; see Replacements below).

Each player, starting with the attacking player (Pact if this is a meeting engagement), will alternate placing one Objective marker of the color of the side who starts in control of the location on the map until three (3) are placed. Objectives must be placed in town hexes or adjacent to bridge hex sides.

At least one objective must be placed on each map of the location. If placed in a town hex, the entire town is the objective. If placed adjacent to a bridge both sides of the bridge must be controlled for the objective to be considered controlled.

No objective may be placed within 3 hexes of a map edge from which units are entering.

  1. Surprise Roll – prior to setting up on-map forces, both sides must make a surprise roll. Whichever side controls the location when a Battle Marker is placed is the Defender.

Each side rolls 1d6, and receives a +1 DRM for each of its unit with the Red Recon Special Ability Triangle in any of its' formations at the location. If one side ends with a total that is 3 or more HIGHER than their opponent, they get the effects of surprise.

a. Defender is surprised – Attacker may set up one formation that contains at least one recon unit on map at start within 8 hexes of the entry map edge; the attacking player also receives initiative for one formation.

b. Attacker is surprised – The defender may freely set up on map without restriction and may also set up one formation hidden. To set up hidden, record the starting location of each unit in the formation, using the same Map-Hex notation as found in Scenarios. Hidden units may only set up in a hex offering a terrain defensive bonus.

Example: Map 1-A5.

Hidden units remain hidden until they fire or move; or an enemy unit attempts to move into their hex.

  1. Formations that start the Operational turn in the location of the battle can set up anywhere on the map at least eight (8) hexes away from the map edge opposite the edge enemy units are entering.

  2. Formations that are entering the location in the current Operational turn will enter the map during their first activation from the appropriate map edge.

Again: Formations entering which are above the road capacity to enter the location will be assigned to enter as reinforcements starting turn 4.

  1. If there is an Engaged marker in the location, one player rolls 1d6. If 1-3 NATO sets up first within 8 hexes of the western edge of the map. 4-6 PACT sets up first within 8 hexes of the eastern edge of the map. The remaining player sets up within 8 hexes of the opposite edge of the first player.

8.1 Artillery Support

Each ARTY, SPARTY, MLRS or SPMLRS unit that is part of a formation whose HQ is adjacent to a Battle location may contribute to that adjacent Battle a number of Off-Board Artillery Strikes for that Operational turn.

Each such ARTY or SPARTY unit contributes three (3) Off-Board Artillery Strikes to the Off-Board Artillery Track for the Battle of type HE, DPICM, or SMOKE; an MLRS or SPMLRS unit contributes one (1) Off-Board Artillery Strikes; and as a last alternative, any ARTY, SPARTY may instead contribute two (2) ADM Strikes.

Each Strike is considered regular Off-board Artillery during the Battle and so can only be used once during that scenario. Exception: This kind of OBA IS restricted by the range of the firing unit, and so is considered 30 hexes away from the friendly map edge during the battle when determining range.

Artillery units must be assigned as support in this way prior to the resolution of any battles.

9.0 Executing Battles

  1. Remember to place any Improved positions and Minefield-Placed markers you have accumulated for your side when you set up.
  2. Once the scenario is set up, play the scenario.
  3. Each battle that is initiated will have 12 turns.

9.1 Bypass

If during a battle one side withdraws all its forces before turn 8, then the other side may immediately Bypass the withdrawn Formation and advance into a location that is adjacent to the battle during the current operational turn. Also, if an attacker is able to exit an entire formation consisting of at least ½ (round up) of its initial strength from the map prior to turn 6, it can then also immediately enter the appropriate adjacent location during the current operational turn.

Strength in this case is considered to be the number of units in the formation with either an AP or HE Firepower value. Formations that successfully Bypass may enter battles in other locations. In such a case, they enter as reinforcements starting on turn 4.

10.0 Post Battle Resolution

At the conclusion of the 12 turns, the results determine control of the location or continuation of battle.

  1. If all units of one side are eliminated then the remaining side gains control of that location, and the battle ends immediately.
  2. If one side controls all three objectives at the end of turn 12, that side gains control of the location and the opposing side must withdraw.
  3. If neither side has all three objectives: a. The side with only one objective may declare a withdrawal, and end the battle. b. If a withdrawal is not declared, the side with two objectives may place an Engaged marker in the location on the Operational map, in which case the location remains contested for this Operational turn, also ending the battle. Contested means neither side is considered to control the location for purposes of Replacements. If an Engaged marker is placed, the battle ends, but will continue next Operational turn; do not move the Formation HQs of either side from this location during the next Operational turn. (Artillery Support is not subject to this restriction.) c. If the side with two objectives does not place an Engaged marker, that side may opt to either continue battle for three more turns; or execute its own withdrawal, ending the battle.
  4. If at the end of turn 15 neither side has gained all three objectives or withdrawn, then the location remains contested, but will continue next Operational turn; do not move the Formation HQs of either side from this location during the next Operational turn. (Artillery Support is not subject to this restriction.)
  5. Units withdrawn from the map move to the adjacent location on the operational map. Helicopter units return to their Forward Operating Base on the operational map. All units that ended the battle disrupted are undisrupted.

10.1 How to withdraw

A withdrawing formation is moved from that location to another adjacent, friendly controlled location. If there is no such location, they cannot withdraw. If a force cannot withdraw, it remains engaged.

Place an Engaged marker in the location on the Operational map, in which case the location remains contested for this Operational turn, also ending the battle. Contested means neither side is considered to control the location for purposes of Replacements.

If an Engaged marker is placed, the battle ends, but will continue next Operational turn; do not move the Formation HQs of either side from this location during the next Operational turn. (Artillery Support is not subject to this restriction.)

10.2 Replacements

At the end of each battle, players determine the replacements they receive as below; they are not received until the following night turn. This represents units regrouping and making repairs. Players record the replacements.

Each player rolls 2d6 on the Replacement Table for each of their own individual reduced units on their Operational map, and each unit in their casualty box. Vehicles check on the Vehicle section of the Replacement Table; Troops (non-vehicular soft targets) check on the Troops section of the Replacement Table.

In those two sections, find the row depending on whether the Player possesses the location of the battle just resolved. Remember, if there is an Engaged marker in the location, neither player controls the location for purposes of Replacements.

+2 steps: add two steps to the units' strength. Reduced units or one-step units may gain no more than one step; any extra step is lost. If a unit is in a player's casualty box, it is removed from the casualty box, and is again available to its parent formation for combat in the next operational turn at full strength.

+1 step: add one steps to the units' strength. If a unit is in a player's casualty box, it is removed from the casualty box, and is again available to its parent formation for combat in the next operational turn at its new strength.

No effect: the unit receives no replacements steps.

-1 step: a two-step unit is flipped to its reduced side; an already reduced or one-step unit is eliminated and placed in the casualty box. A unit already in the casualty box suffers no effect.

If there are more battles to resolve, return to Executing Battles (See 9.0).

Replacement Tables

Vehicles

ResultDoes not Control battlefield locationControls battlefield location
+2 steps57, 3
+1 step7, 125, 6, 11
No effect2, 4, 6, 8, 9, 102, 8, 9, 10, 12
-1 step11 or 34

Troops

ResultDoes not Control battlefield locationControls battlefield location
+2 steps7, 35, 6, 11
+1 step5, 6, 117, 8, 9, 10, 12
No effect2, 8, 9, 10, 122, 3
-1 step44

11.0 Air Strikes

In addition to using air assets in ground battles, both sides may commit air units to locations that are not engaged in ground combat to make independent strikes of their own.

Resolution of these strikes uses the same procedures as if you had drawn a Close Air Support card during a battle (Core Rules 4.0), starting with the roll for interception (Core Rules 4.1). But, during Anti-Aircraft fire (Core Rules 4.2), the side with the ground units will randomly select 2/3rds of the unit counters present and lay them out in an open area. The attacking air unit will select its target from this group.

The defending player will then be allowed air defense fire from any of the selected unit group as per normal procedure in Core Rules 4.2. (Since units are not actually placed on a map, Anti-Aircraft Fire range is assumed to be normal range with no range modifiers).

12.0 Night Turns

Each night turn at the end of each campaign day will have an operational turn, if announced, followed by an administrative phase:

  1. At the start of each night turn, both sides will announce whether they will launch a night attack. Each side can make one such attack. When announcing the attack the player will announce the location of the attack and move the forces involved on the operational map, per the Operational Map movement rules (See 7.0). Any such battles announced will then be played out using the night rules (Core Rules 16.6).

  2. After any night battles, there is an administrative phase. During the administrative phase, execute the following steps, in order: a. Both sides allocate the total replacements that were determined after each previous Battle that day. b. If your campaign has reinforcements scheduled, place reinforcements are placed on the operational map as your campaign rules indicate. c. Advance the turn and day markers.