RulesPal
Chat
Rulebook
Totenstadt thumbnail

Totenstadt

Totenstadt Rulebook

Table of Contents

Table of Contents

  • 1. Card Types
    • 1.1 Mercenary Card
    • 1.2 Enemy Card
    • 1.3 Boss Ability Card
    • 1.4 Mercenary Status Card
    • 1.5 Enemy Status Card
    • 1.6 Boss Status Card
    • 1.7 Weapon Card
    • 1.8 Armour Card
    • 1.9 Item Card
    • 1.10 Starting Equipment Card (Weapon)
    • 1.11 Starting Equipment Card (Armour)
    • 1.12 Starting Equipment Card (Item)
    • 1.13 Companion Card
    • 1.14 Location Card
    • 1.15 Noise Card
    • 1.16 Condition Card
    • 1.17 Event Card
    • 1.18 Event Table
    • 1.19 Objective Card
    • 1.20 Task Card
    • 1.21 Zone Card
    • 1.22 Danger Level Card
  • 2. Game Setup
  • 3. Creating a Mission
  • 4. Preparation
  • 5. Equipment
    • 5.1 Size of Equipment
    • 5.2 Use of Equipment
    • 5.2 Inventory
    • 5.3 Status Effects
  • 6. Start Phase
    • 6.1 Beginning an Encounter
    • 6.2 Enemy Cards
    • 6.3 Event Cards
    • 6.4 Companion Cards
    • 6.5 Location Cards
  • 7. Mercenary Action Phase
    • 7.1 Action Chain
    • 7.2 Actions in the Mercenary Action Phase
      • 7.2.1 Attacking
        • 7.2.1.1 Melee Attack
          • 7.2.1.1.1 Range of Melee Attacks
          • 7.2.1.1.3 Melee Attacks Without Weapons
          • 7.2.1.1.4 Handling Melee Weapons
          • 7.2.1.1.5 Noise of Melee Weapons
          • 7.2.1.1.6 Status Effect Symbols on the Melee Value
        • 7.2.1.2 Ranged Attack
          • 7.2.1.2.1 Range of Ranged Attacks
  • 8. Enemy Action Phase
    • 8.1 The Swarm
      • 8.1.1 Leading the Swarm
      • 8.1.2 Order
    • 8.2 Attacking
      • 8.2.1 Melee Attack
        • 8.2.1.1 Range of Enemy Melee Attacks
        • 8.2.1.2 Noise of Enemy Melee Weapons
      • 8.2.2 Ranged Attack
        • 8.2.2.1 Range of Enemy Ranged Attacks
        • 8.2.2.2 Hitting Other Enemies
        • 8.2.2.3 Noise of Enemy Ranged Attacks
  • 9. Status Phase
  • 10. End of Encounter
  • 11. End Phase
  • 12. Rest Phase
    • 12.1 Range in the Rest Phase
    • 12.2 Noise in the Rest Phase
    • 12.3 Actions in the Rest Phase
      • 12.3.1 Repeatable Actions
        • 12.3.1.1 Change, Hand Over or Leave Equipment
        • 12.3.1.2 Changing Position
      • 12.4 One-Time Action
        • 12.4.1 Using an Ability
        • 12.4.2 Recovering
        • 12.4.3 Searching for Equipment
  • 13. Showdown
    • 13.1 Rescue Mission Showdown
    • 13.2 Exploration Mission Showdown
    • 13.3 Hunt Showdown
      • 13.3.1 Boss Hunt Showdown
      • 13.3.2 Enemy Hunt Showdown
  • 14. Debriefing
    • 14.1 The Mission Objective Was Achieved
    • 14.2 The Mission Objective Was Not Achieved
  • 15. Revival Phase
  • 16. Closing Words

1. Card Types

This chapter gives an overview of the card types in Totenstadt.

1.1 Mercenary Card

The mercenary card shows the base values for melee, ranged and life points, as well as the mercenary's abilities.

  1. Card type
  2. Card name
  3. Melee value
  4. Ranged value
  5. Life points
  6. Abilities

1.2 Enemy Card

The enemy card shows the base values for melee, ranged and life points, as well as the enemy's abilities and faction symbol.

  1. Card type
  2. Card name
  3. Enemy speed
  4. Melee value
  5. Ranged value
  6. Life points
  7. Abilities
  8. Status symbols
  9. Faction symbol

1.3 Boss Ability Card

This card shows the abilities a boss can use in a boss fight (Showdown).

  1. Card type
  2. Card name
  3. Abilities

1.4 Mercenary Status Card

This card shows the life points, the immune system track, the inventory slots, the first aid status and the status symbols for the status effects Burning, Stunned and Motivated.

  1. Who the card is for
  2. Life points status
  3. Immune system status
  4. Status symbols
  5. First aid status
  6. Inventory slot
  • Small equipment occupies 1 slot.
  • Large equipment occupies 2 slots.
  • Equipment stored here can be used directly, but using it costs 1 action.
  • If a weapon is used, it gets -1 on its attack value.

1.5 Enemy Status Card

This card shows the life points of an enemy and the status symbols for the status effects Burning, Stunned and Marked. The cards are designed so that enemy cards can be placed on them without covering the life points or status symbols.

  1. Who the card is for
  2. Life points status
  3. Status symbols

1.6 Boss Status Card

This card shows the life points of a boss and the status symbols for the status effects Burning, Stunned and Marked. The cards are designed so that enemy cards can be placed on them without covering the life points or status symbols.

  1. Who the card is for
  2. Life points status
  3. Status symbols

1.7 Weapon Card

This card shows the base values for melee, ranged and noise, the number of uses, the size of the weapon and its optimal grip. The associated abilities are also listed here.

  1. Card type
  2. Card name
  3. Weapon size
  4. Optimal grip of the weapon
  5. Melee value
  6. Ranged value
  7. Noise value
  8. Abilities

1.8 Armour Card

This card shows the base defence value, the size of the armour, and the slot in which it can be equipped. The associated abilities are also listed here.

  1. Card type
  2. Card name
  3. Armour size
  4. Defence value
  5. Abilities
  6. Armour position

1.9 Item Card

This card shows the number of uses and the size of the item. The associated abilities are also listed here.

  1. Card type
  2. Card name
  3. Item size
  4. Uses
  5. Abilities

1.10 Starting Equipment Card (Weapon)

This card shows the base values for melee, ranged and noise, the number of uses, the size and the optimal grip of the weapon. The associated abilities are also listed here.

  1. Card type
  2. Card name
  3. Weapon size
  4. Optimal grip of the weapon
  5. Melee value
  6. Ranged value
  7. Noise value
  8. Abilities

1.11 Starting Equipment Card (Armour)

This card shows the base defence value, the size of the armour, and the slot in which it can be equipped. The associated abilities are also listed here.

Translator's note. The printed callout labels for this card in the German original are the item labels ("Größe des Gegenstandes", "Anwendungen", "Fähigkeiten"), which do not match the armour description above. The labels are transcribed here as printed:

  1. Card type
  2. Card name
  3. Item size
  4. Uses
  5. Abilities

1.12 Starting Equipment Card (Item)

This card shows the number of uses and the size of the item. The associated abilities are also listed here.

  1. Card type
  2. Card name
  3. Item size
  4. Uses
  5. Abilities

1.13 Companion Card

This card lists the positive and negative abilities that take effect when a companion accompanies the mercenaries.

  1. Card type
  2. Card name
  3. Abilities

1.14 Location Card

This card states which locations are near the current surroundings and how the mercenaries can interact with them.

  1. Card name
  2. Conditions
  3. Results

1.15 Noise Card

This card shows the current level of noise.

1.16 Condition Card

These cards are tied to specific conditions. They are only laid out when the respective condition is met, for example reaching a boss or eliminating a certain enemy.

1.17 Event Card

This card states that an event happens.

1.18 Event Table

This card lists the possible events.

Example entries printed on the event table:

  • For the rest of the mission, enemies with the ability Swarm (Melee) or Swarm (Ranged) do not need to be next to each other for the ability to work.
  • Draw 1 companion from the supply and roll 1 die. The result states at the end of which round the companion is removed and can no longer be rescued.
  • For the current mission, the abilities Swarm (Melee) and Swarm (Ranged) are removed from every enemy card.

1.19 Objective Card

This card states that the objective of the mission has been reached.

1.20 Task Card

These cards state the mission tasks.

1.21 Zone Card

These cards state the zones in which missions can take place, as well as their special properties.

1.22 Danger Level Card

These cards state the danger levels a mission can have, as well as their special properties.

Note. Totenstadt is meant to be fun. If some of the following rules don't suit your group, change them! Send the publisher your house rules at [email protected]; perhaps they will find their way into the next rulebook.

If card text and rulebook text contradict each other, the card text always takes precedence.

2. Game Setup

All cards with a red back are shuffled and form the supply (Vorrat).

All cards with a blue back are shuffled and form the equipment deck (Ausrüstungsstapel).

All cards with a grey back are shuffled and form the starting equipment deck (Startausrüstungsstapel).

All cards with a green back are sorted and form the condition deck (Bedingungsstapel).

All cards with a black back are sorted and form the mission deck (Missionsstapel).

A place for the loot pile (Beutestapel) is determined.

The markers, tokens and dice are sorted and set aside.

The position markers 1 to 6 are laid out in a row in the middle of the table. If there are fewer than six mercenary cards in play, the position markers are laid out so that some positions are occupied more than once.

Each player receives a chosen or random mercenary card and a mercenary status card. The mercenary card is placed next to a still-free position marker. Each player lays out their mercenary status card in front of themselves.

Next to each mercenary card, an enemy status card is placed to the right.

The noise card is placed where all players can see it.

3. Creating a Mission

One random card is drawn from each of the following card types:

  • Task (Aufgabe)
  • Zone
  • Danger level (Gefahrenstufe)

Then, according to the drawn task, a random matching card is drawn from the supply and set aside:

  • Exploration (Erkundung) requires a location card.
  • Rescue (Rettung) requires a companion card.
  • Elimination (Ausschalten) requires an enemy card.

4. Preparation

5 enemy cards are drawn at random from the supply and placed next to the noise card. These enemies form the noise pile (Lärmstapel).

For each mercenary card, 5 cards are drawn at random from the supply and shuffled together into a stack. This stack forms the encounter deck (Begegnungsstapel) and represents the part of the Totenstadt in which the mission takes place.

Afterwards, the objective card and the event card are shuffled into the encounter deck.

Each mercenary receives 2 random cards from the starting equipment deck. This equipment can either be stowed in the inventory or equipped directly.

Finally, the tokens are distributed:

  • Mercenary status card:
    • 1 token on the 10 of the life points track.
    • 1 token on the 10 of the immune system track.
    • 1 token next to the 1 of the inventory slots.
    • 1 token next to the 1 of the first aid track.
  • Equipment cards:
    • 1 token each on the highest number of possible uses.
  • Enemy status cards:
    • 1 token each next to each enemy status card.
  • Noise card:
    • 1 token next to the noise card.

5. Equipment

Weapons, armour and items are collectively summarised under the term equipment (Ausrüstung).

5.1 Size of Equipment

Small equipment uses:

  • 1 slot in the inventory.

Large equipment uses:

  • 2 slots in the inventory.

Some abilities can only be used with small or large equipment. For example, the ability Pistol Expert (Ranged) of Ralf only works with small one-handed ranged weapons.

5.2 Use of Equipment

The uses of an equipment item show how often it can be used. Uses always start at their maximum unless stated otherwise.

When all uses have been spent, the mercenary may keep the equipment or leave it behind, in which case it is placed on the loot pile (Beutestapel) of the current encounter.

If an equipment item has no uses, it can be used any number of times.

5.2 Inventory

(The German original numbers this section 5.2 a second time; the numbering is kept as printed in the translation below.)

Any type of equipment can be stowed in the inventory and used from there, as if the mercenary had equipped it.

If an attack is made with a stowed weapon, its attack value receives -1. Stowed items receive no penalty, but the abilities of stowed armour cannot be used.

A mercenary's inventory is 13 slots large.

  • If slot 8 is occupied: the mercenary loses 1 die (1W6) on all actions.
  • If slot 10 is occupied: the mercenary loses 2 dice (2W6) on all actions.
  • If slot 11 is occupied: the mercenary loses 3 dice (3W6) on all actions.

When the corresponding slot becomes free again, the mercenary also loses the penalty.

5.3 Status Effects

Some equipment and mercenaries cause one or more of the following status effects at certain moments:

Stunned (Betäubt), Burning (Brennt), Bleeding (Blutung), Marked (Markiert) or Motivated (Motiviert).

  1. Stunned - The attack values of the affected mercenary or enemy are reduced by 1.
  2. Burning - The affected loses 1 life point in each status phase.
  3. Bleeding - The affected loses 1 life point in each status phase.
  4. Marked - Attacks against the affected receive +1 on their attack values.
  5. Motivated - The attack values of the affected receive +1.

Further information about each status effect is printed on the respective cards.

6. Start Phase

6.1 Beginning an Encounter

Each encounter begins with the start phase.

For each mercenary, 1 card is drawn from the encounter deck and laid out. After the required number of cards has been laid out, the various card types are resolved as follows.

6.2 Enemy Cards

For each enemy, roll 1 die to determine the position on which it is placed.

A mercenary and all enemies at its position are called a combat group (Kampfgruppe).

If events, companions or abilities require further enemies to be laid out, they are drawn from the supply. If the enemies are specifically named (for example by a companion ability) and the required number is not fully available, only the maximum number available is laid out.

6.3 Event Cards

When an event card is drawn, roll 1 die and resolve the result using the event table.

6.4 Companion Cards

Drawn companion cards are placed where all players can see them. They are resolved in the end phase of an encounter.

6.5 Location Cards

Drawn location cards are placed where all players can see them. They are resolved in the end phase of an encounter.

After all cards have been resolved, play continues with the mercenary action phase.

7. Mercenary Action Phase

7.1 Action Chain

In the mercenary action phase, each mercenary has 1 action.

After each mercenary has chosen their action, they must decide together in which order the actions are resolved.

Once they have agreed on an order, it cannot be changed any more, and the actions are resolved one after another.

This means that attacks can, for example, go into empty space because the enemy has already been eliminated by another mercenary.

7.2 Actions in the Mercenary Action Phase

7.2.1 Attacking

7.2.1.1 Melee Attack

To make a melee attack, the attack value must first be determined.

The attack value is calculated as follows: Melee value of the mercenary + melee value of the weapon chosen for the attack + optimal grip (yes or no).

Optimal grip is explained in section 7.2.1.1.4 (Handling melee weapons). This rule also applies to ranged attacks.

Next, check whether the attack value is affected negatively or positively by abilities, events or status effects. If necessary, it is adjusted accordingly.

The final attack value determines the number of dice used for the melee attack.

Dice results:

  • 1 - 3: no hit
  • 4 - 6: one hit

Each hit reduces the life points of the enemy by 1.

If more hits are scored than the enemy has life points, the excess hits are lost.

7.2.1.1.1 Range of Melee Attacks

Melee attacks can only reach enemies in your own combat group or in a directly adjacent combat group.

7.2.1.1.3 Melee Attacks Without Weapons

(The original has no section 7.2.1.1.2; the numbering is kept as printed.)

If a mercenary wants to make a melee attack without a melee weapon, the attack value is determined as follows: Melee value of the mercenary +/- modifications from abilities, events or status effects. The final attack value is now fixed and determines the number of dice used for the melee attack.

7.2.1.1.4 Handling Melee Weapons

Each melee weapon states how many hands it is optimally handled with. For example, the axe is optimally handled with two hands, while the hatchet needs only one hand.

If a melee weapon is handled optimally, its full melee value is used for the attack. If it is not used optimally, for example when the axe is handled with only one hand, its melee value is reduced by 1.

7.2.1.1.5 Noise of Melee Weapons

Some melee weapons create noise when attacking.

If noise is caused, the current level on the noise card rises by the amount stated on the weapon.

7.2.1.1.6 Status Effect Symbols on the Melee Value

If a status effect symbol, such as Stunned, appears directly on the melee value, this means that the weapon can trigger this status effect in melee under certain conditions.

The conditions are stated on the card.

7.2.1.2 Ranged Attack

To make a ranged attack, the attack value must first be determined.

The attack value is calculated as follows: Ranged value of the mercenary + ranged value of the weapon chosen + optimal grip (yes or no).

Optimal grip is explained in section 7.2.1.1.4 (Handling melee weapons). This rule also applies to melee attacks.

Next, check whether the attack value is affected positively or negatively by abilities, events or status effects. If necessary, it is adjusted accordingly.

The final attack value determines the number of dice used for the ranged attack.

Dice results:

  • 1 - 3: no hit
  • 4 - 6: one hit

Each hit reduces the life points of the enemy by 1.

If more hits are scored than the enemy has life points, the excess hits are lost.

7.2.1.2.1 Range of Ranged Attacks

Ranged attacks can reach enemies regardless of the combat group in which they are located.

7.2.1.2.2 Hitting Other Mercenaries

If a ranged attack is made at a combat group other than your own, every rolled 1 hits the mercenary there.

7.2.1.2.3 Ranged Attacks with Two Ranged Weapons

If a mercenary is equipped with two ranged weapons, they can split their ranged attack between two enemies. The attack value is calculated exactly as for an attack with a single ranged weapon (see section 7.2.1.2). Each individual attack must be assigned to one of the two enemies before the dice are rolled. Once assigned, the attacks cannot be changed. If one enemy survives its attack, the other attack cannot be redirected to it afterwards.

7.2.1.2.4 Ranged Attacks Without Weapons

If a mercenary makes a ranged attack without a ranged weapon, the attack value is calculated as follows: Ranged value of the mercenary +/- positive or negative influence from abilities, events or status effects.

The final attack value determines the number of dice used for the ranged attack.

7.2.1.2.5 Handling Ranged Weapons

Each ranged weapon states how many hands it is optimally handled with. For example, the shotgun is optimally handled with two hands, while the pistol needs only one hand.

If a ranged weapon is handled optimally, its full ranged value is used for the attack. If it is not used optimally, for example when the shotgun is handled with only one hand, its ranged value is reduced by 1.

7.2.1.2.6 Noise of Ranged Weapons

Some ranged weapons create noise when attacking.

If noise is caused, the current level on the noise card rises by the amount stated on the weapon.

7.2.1.2.7 Status Effect Symbols on the Ranged Value

If a status effect symbol, such as Burning, appears directly on the ranged value, this means that the weapon can trigger this status effect in ranged combat under certain conditions.

The conditions are stated on the card.

7.2.2 Equipping Ammunition and Attachments

If an ammunition or attachment shows the following symbol, it can be equipped to a weapon.

Once the ammunition or attachment is equipped to an equipped weapon, the mercenary can use the abilities that are now possible.

Only one type of ammunition and two attachments can be equipped to a weapon at the same time. If the corresponding space is occupied, the ammunition or attachment located there must first be removed.

The cost of the action includes equipping and removing an ammunition or attachment at the same time.

7.2.2.1 Ammunition for Ranged Weapons

Ranged weapons use ammunition during an attack, which is shown by the uses on the card. At the start of a mission, ranged weapons are equipped with their standard ammunition.

There are four types of ammunition: cartridges (Patronen), cases (Hülsen), bolts (Bolzen) and arrows (Pfeile). Which type of ammunition a ranged weapon can use is stated on the card of the ranged weapon.

These symbols are also found on the ammunition cards and show which type of ammunition the card is. It is not possible to use every type of ammunition with every ranged weapon. Ammunition of the type case cannot be used with a pistol, and ammunition of the type arrow cannot be used with a pump-action shotgun.

If an ammunition card shows several symbols, the mercenary must choose which type of ammunition it is.

Once ammunition has been assigned to a type, it can only be used with ranged weapons that use that type of ammunition.

7.2.2.2 Special Ammunition

Besides standard ammunition, there is also special ammunition with strong abilities. Armour-piercing ammunition has the ability Penetration (Ranged), which means that ranged attacks made with this ammunition ignore the ability Protected (Geschützt).

Once all uses of a special ammunition are spent, it must be removed before ranged attacks can be made again with that ranged weapon.

7.2.3 Using Abilities

A mercenary can spend their action to use one of their own abilities or the ability of an equipped item of equipment.

7.2.4 Changing Position

A mercenary can swap position with a mercenary of an adjacent combat group. Only the mercenary who started the action spends their action.

7.2.5 Equipping Equipment

To equip equipment, the mercenary must have at least one free hand for a weapon, or the required free body zone for armour.

Items do not have to be equipped and can be used directly from the inventory.

The cost of the action includes equipping and unequipping a weapon or armour at the same time.

7.2.6 Handing Over Equipment

Weapons, armour and items can be handed over to mercenaries in adjacent combat groups. The mercenary handing over the equipment does not have to have it equipped and can hand it over directly from the inventory. The mercenary receiving the equipment must have at least one free hand for a weapon, or the required free body zone for armour. Items are placed directly into their inventory.

7.2.7 Leaving Equipment Behind

Weapons, armour or items that a mercenary wants to leave behind are placed on the loot pile and are shuffled back into the equipment deck at the end of the rest phase.

7.2.8 Companion Abilities

If a mercenary has a companion with them, that companion's ability can also be used. Because it is the ability of a companion, using it does not consume the mercenary's action.

7.2.9 Fleeing

Mercenaries can leave an encounter by fleeing.

The mercenary card of a fleeing mercenary is turned sideways to show that the mercenary has left the encounter.

Fleeing has the following effects:

  • A mercenary who flees can only act again in the rest phase.
  • Enemies in the combat group of the fleeing mercenary change their position (see section 8.6 Changing Position).
  • Enemies with the ability Quick Strike (Schnell greifen) immediately make one free attack against the fleeing mercenary, outside of the action sequence.
  • In the end phase, each fleeing mercenary must roll 1 die.

Dice results:

  • 1 - 2: One random enemy from the supply is laid out.
  • 3 - 6: Nothing happens.

If all mercenaries have fled, the enemies laid out are placed on the noise pile and play goes directly to the rest phase.

After the mercenary action phase comes the enemy action phase.

8. Enemy Action Phase

8.1 The Swarm

A special feature of enemies is the ability Swarm (Melee) (Schwarm (Nahkampf)). If several enemies with Swarm (Melee) are in one combat group, their melee value increases by 1 for each further enemy with this ability in the group.

8.1.1 Leading the Swarm

In the first enemy action phase, one player is appointed as the leader of the swarm (Leitung des Schwarms). For the rest of the mission this player controls the enemies:

  • They carry out the enemies' attacks.
  • They adjust the enemies' life points.
  • They make sure the enemies' abilities are activated.

Each enemy has one action, which is either a melee or a ranged attack, unless a card says otherwise.

8.1.2 Order

Each enemy card shows a speed symbol. This speed determines the order in which the enemies' actions are resolved.

Resolution always begins with the first enemy at position 1.

8.2 Attacking

Most enemies always attack in melee and only attack the mercenary in their combat group. If an enemy has both melee and ranged attacks, this is stated on its card. In that case, a die decides which type of attack the enemy uses and which mercenary it targets.

8.2.1 Melee Attack

To make a melee attack, the attack value must first be determined. The attack value is calculated as follows: Melee value of the enemy.

Next, check whether the attack value is affected negatively or positively by abilities, events or status effects. If necessary, it is adjusted accordingly.

The final attack value determines the number of dice used for the melee attack.

Dice results:

  • 1 - 3: no hit
  • 4 - 6: one hit

Each hit reduces the life points of the mercenary by 1. If more hits are scored than the mercenary has life points, the excess hits are lost.

8.2.1.1 Range of Enemy Melee Attacks

Melee attacks can only reach mercenaries in their own combat group, unless a card says otherwise.

8.2.1.2 Noise of Enemy Melee Weapons

Melee attacks by enemies do not cause noise, unless a card says otherwise.

8.2.2 Ranged Attack

To make a ranged attack, the attack value must first be determined. The attack value is calculated as follows: Ranged value of the enemy.

Next, check whether the attack value is affected negatively or positively by abilities, events or status effects. If necessary, it is adjusted accordingly.

The final attack value determines the number of dice used for the ranged attack.

Dice results:

  • 1 - 3: no hit
  • 4 - 6: one hit

Each hit reduces the life points of the mercenary by 1. If more hits are scored than the mercenary has life points, the excess hits are lost.

8.2.2.1 Range of Enemy Ranged Attacks

Ranged attacks can only reach mercenaries in their own combat group, unless a card says otherwise.

8.2.2.2 Hitting Other Enemies

If a ranged attack is made at a combat group other than the enemy's own, every rolled 1 hits a random enemy in that combat group.

8.2.2.3 Noise of Enemy Ranged Attacks

Ranged attacks by enemies do not cause noise, unless a card says otherwise.

8.2.2.4 Ammunition for Enemy Ranged Weapons

Ranged attacks by enemies require no ammunition or uses, unless a card says otherwise.

8.2.3 Attacking Body Zones

With each attack by an enemy, one additional red die is rolled. Result of the die:

  • 1 - 2: the attack hits the head.
  • 3 - 4: the attack hits the chest.
  • 5 - 6: the attack hits the hands.

If the mercenary wears armour in the attacked body zone, they can defend against the attack (see section 8.8, Mercenary Actions in the Enemy Action Phase). If they wear no armour there, the full damage is deducted from their life points.

8.3 Defending

Enemies do not actively defend; they take the damage directly, unless a card says otherwise.

8.4 Fleeing

Enemies do not flee from an encounter, unless a card says otherwise.

8.5 Eliminated

When an enemy is eliminated, it is placed to the side where all players can see it.

8.6 Changing Position

An enemy only changes its position if no mercenary remains in its combat group, or if an ability requires it.

If an enemy must change position because no mercenary is left in its combat group, it does so in the next status phase, and this uses its action for the round.

If an enemy must change position because an ability requires it, it does so immediately or, unless stated otherwise, in the next status phase, and this uses its action for the round.

8.7 Using Abilities

Enemy abilities are passive and do not need to be activated with an action. The leader of the swarm must check, before the action is spent, whether one or more abilities are active.

After the enemy action phase ends, play continues with the status phase, unless the encounter has ended.

8.8 Mercenary Actions in the Enemy Action Phase

8.8.1 Defending

When a mercenary is attacked, they can defend if they wear armour in the attacked body zone. Defending does not use the mercenary's action.

Each armour has a defence value and can defend a set body zone. For example, the motorcycle helmet is an armour that can be used to defend against attacks on the head body zone.

If a mercenary defends, the defence value is calculated as follows: Defence value of the armour +/- positive or negative influence from abilities, events or status effects.

The final defence value determines the number of dice used for the defence.

Dice results:

  • 1 - 3: the damage was not prevented.
  • 4 - 6: the damage was prevented.

Each damage that is not prevented reduces the life points of the mercenary by 1. If more damage is prevented than the attack causes, the excess successes are lost.

A mercenary can defend against attacks an unlimited number of times in a round.

If a body zone is attacked that is not protected by armour or a defence value, the mercenary cannot defend and takes the full damage.

9. Status Phase

In the status phase, all status effects, such as Burning, and enemy abilities, such as Swarm Regeneration (Schwarm Regeneration), are resolved.

After the status phase ends, play returns to the mercenary action phase and the next round begins.

10. End of Encounter

An encounter ends when one of the following conditions is met:

  • All mercenaries have been eliminated. Play continues with the debriefing (Nachbesprechung).

  • All mercenaries have fled. All enemies still laid out are placed on the noise pile, and then the rest phase follows. For each eliminated enemy, roll 1 die.

    Dice results:

    • 1 - 2: the enemy is placed on the noise pile.
    • 4 - 6: the enemy is shuffled back into the supply.

    (The original does not list a result for 3; the table is transcribed as printed.)

  • All enemies have been eliminated. Play continues with the end phase. For each eliminated enemy, roll 1 die.

    Dice results:

    • 1 - 2: the enemy is placed on the noise pile.
    • 4 - 6: the enemy is shuffled back into the supply.

    (The original does not list a result for 3; the table is transcribed as printed.)

11. End Phase

In the end phase, the mercenaries can perform the following actions:

  • Explore locations. Laid-out locations can be explored. What to do is stated on the respective location card. If several locations are laid out, the mercenaries must choose one of them. At the end of the rest phase, each location is placed back into the supply.

  • Take and leave companions. Laid-out companions can be placed to the left of a mercenary, provided that no other companion is already there. See also section 12.5.3.

  • Take and leave loot. Weapons, armour and items from the loot pile can be taken by any mercenary, provided there is enough space. Anything left behind is shuffled back into the matching pile: the equipment deck, the starting equipment deck or the condition deck.

After the end phase, play continues with the rest phase.

12. Rest Phase

12.1 Range in the Rest Phase

There is no range in the rest phase. Restrictions such as "... of a reachable mercenary ..." have no effect in the rest phase.

12.2 Noise in the Rest Phase

At the end of the rest phase, the noise falls by 1 and must be adjusted accordingly on the noise card.

12.3 Actions in the Rest Phase

The actions a mercenary can take are divided into two categories: repeatable actions and the one-time action.

12.3.1 Repeatable Actions

12.3.1.1 Change, Hand Over or Leave Equipment

Each mercenary can, as often as they like, change their equipped equipment, hand equipment over to other mercenaries, or leave it behind.

Equipment that a mercenary wants to leave behind is shuffled back into the matching pile at the end of the rest phase: the equipment deck, the starting equipment deck or the condition deck.

12.3.1.2 Changing Position

Before the next encounter begins, all mercenaries can move to a new position if needed. Companions who are with a mercenary who changes position move with them.

12.4 One-Time Action

Unlike the repeatable actions, for the one-time action the mercenary must choose one of the options.

12.4.1 Using an Ability

A mercenary or equipment ability can be used. For example, Jenny can use her first-aid ability to restore life points to herself or to another mercenary. If she has equipped the Bible, she can use it to motivate another mercenary for the next encounter.

12.4.2 Recovering

To recover and regain life points, roll 1 die.

Dice results:

  • 1 - 2: 1 life point
  • 3 - 4: 2 life points
  • 5 - 6: 3 life points
12.4.3 Searching for Equipment

To search for equipment, roll 1 die.

Dice results:

  • 1 - 2: one enemy from the supply is added to the next encounter.
  • 3 - 4: the top card of the equipment deck is drawn.
  • 5 - 6: nothing happens.

12.5 Companions in the Rest Phase

If companions are with the mercenaries, they enable further actions.

12.5.1 Using an Ability

Many companions have abilities that can also be used in the rest phase. For example, the medic can use her first-aid ability.

12.5.2 Changing Position

The position of a companion, and thus of the mercenary they accompany, can be changed. No other companion may be at the chosen position. If there is one, that companion must first change its own position or be left behind.

Changing position is also a repeatable action for companions.

12.5.3 Taking or Leaving Companions

If companions are with the mercenaries after an end phase and have not been assigned a position, they must be assigned a position or be left behind. Companions that are already at a position may also be left behind, in order to free that position.

A companion that is left behind is shuffled into the supply. This is a repeatable action.

At the end of the rest phase, play returns to the start phase and a new encounter begins.

13. Showdown

As soon as the mission objective card is laid out in an encounter, that encounter becomes the showdown (Showdown) and the last encounter of the mission. Depending on the type of mission, the showdown has special rules.

Mercenaries cannot flee from a showdown!

13.1 Rescue Mission Showdown

If the objective of the mission is to rescue a companion, that companion is assigned to a random combat group. Roll 1 die to determine at the end of which round it is eliminated.

If the mercenaries manage to rescue the companion and eliminate all enemies, they have successfully completed the mission and go directly to the debriefing after the end phase.

If the companion was eliminated, the mercenaries have lost the mission and go directly to the debriefing, without an end phase.

13.2 Exploration Mission Showdown

If the objective of the mission is to explore a location, roll 1 die and add that many further enemies to the encounter.

If the mercenaries manage to eliminate all enemies, they have successfully completed the mission and go directly to the debriefing after the end phase. The bonus granted by the explored location is applied automatically to all mercenaries.

If all mercenaries have been eliminated, they have lost the mission and go directly to the debriefing, without an end phase.

13.3 Hunt Showdown

If the objective of the mission is to eliminate an enemy, first check whether it has the ability Boss Enemy (Bossgegner).

13.3.1 Boss Hunt Showdown

If the enemy is a boss, its life points rise to 20 and the abilities on its boss ability card are activated.

If the mercenaries manage to eliminate all enemies, they have successfully completed the mission and go directly to the debriefing after the end phase.

If all mercenaries have been eliminated, they have lost the mission and go directly to the debriefing, without an end phase.

13.3.2 Enemy Hunt Showdown

If the enemy is not a boss, each mercenary must roll 1 die before the encounter begins and carry out the corresponding result.

Dice results:

  • 1: 1 random zombie from the supply is laid out.
  • 2: 1 random madman (Verrückter) from the supply is laid out.
  • 3 - 4: a random companion from the supply joins the mercenaries.
  • 5: nothing happens.
  • 6: 1 random mutant from the supply is laid out.

The result always refers to the combat group of the mercenary who rolled.

If the mercenaries manage to eliminate all enemies, they have successfully completed the mission and go directly to the debriefing after the end phase.

If all mercenaries have been eliminated, they have lost the mission and go directly to the debriefing, without an end phase.

14. Debriefing

14.1 The Mission Objective Was Achieved

The mercenaries now recover from their injuries and prepare for the next mission. The following adjustments are made:

Mercenary status cards:

  • Life points and the immune system are set to their maximum.
  • First aid and noise are set to 0.
  • Positive and negative status effects are removed.

Equipment cards:

  • Equipment stays in the possession of the mercenary, and uses remain at their current value.

Mercenaries who were eliminated must check their equipment (see section 14, Wiederbelebungsphase, i.e. the revival phase in chapter 15 below).

(The original's cross-reference reads "Abschnitt 14. Wiederbelebungsphase", but the revival phase is printed as chapter 15. The cross-reference is kept as printed, with the chapter 15 location added in brackets.)

14.2 The Mission Objective Was Not Achieved

All mercenaries were eliminated and are now part of the swarm. All cards are discarded, and the next mission must be started with new mercenaries and new equipment.

15. Revival Phase

If a mercenary is eliminated during an encounter, they can be brought back into play by abilities or automatically in the next rest phase. Before they are fully usable again, they must resolve the revival phase.

  • Roll the immune system. Roll 1 die to determine by how many points the immune system drops. The resulting value is the currently maximum possible value on the life point scale.

  • Adjust life points. Set the life points to the currently possible maximum, which is shown by the current value of the immune system.

  • Check equipment. Roll 1 die to determine whether the equipped equipment was destroyed. Equipment in the inventory does not need to be rolled for.

    Dice results:

    • 1 - 2: the equipment is destroyed and shuffled back into the matching pile: the equipment deck, the starting equipment deck or the condition deck.
    • 3 - 6: nothing happens to the equipment.

16. Closing Words

The publisher's closing words, contact details and illustrator credits from the final pages of the original are not reproduced here, as they contain no rules.

  • 7.2.1.2.2 Hitting Other Mercenaries
  • 7.2.1.2.3 Ranged Attacks with Two Ranged Weapons
  • 7.2.1.2.4 Ranged Attacks Without Weapons
  • 7.2.1.2.5 Handling Ranged Weapons
  • 7.2.1.2.6 Noise of Ranged Weapons
  • 7.2.1.2.7 Status Effect Symbols on the Ranged Value
  • 7.2.2 Equipping Ammunition and Attachments
    • 7.2.2.1 Ammunition for Ranged Weapons
    • 7.2.2.2 Special Ammunition
  • 7.2.3 Using Abilities
  • 7.2.4 Changing Position
  • 7.2.5 Equipping Equipment
  • 7.2.6 Handing Over Equipment
  • 7.2.7 Leaving Equipment Behind
  • 7.2.8 Companion Abilities
  • 7.2.9 Fleeing
  • 8.2.2.4 Ammunition for Enemy Ranged Weapons
  • 8.2.3 Attacking Body Zones
  • 8.3 Defending
  • 8.4 Fleeing
  • 8.5 Eliminated
  • 8.6 Changing Position
  • 8.7 Using Abilities
  • 8.8 Mercenary Actions in the Enemy Action Phase
    • 8.8.1 Defending
  • 12.5 Companions in the Rest Phase
    • 12.5.1 Using an Ability
    • 12.5.2 Changing Position
    • 12.5.3 Taking or Leaving Companions