RulesPal
Chat
Rulebook
The Road Chosen thumbnail

The Road Chosen

The Road Chosen Rulebook

Table of Contents

Table of Contents

  • 1.0 Game Components
  • 2.0 Map Description
    • 2.1 Map Zones
    • 2.2 Zone Save Throw Cover Modifiers
  • 3.0 Counters Description
    • 3.1 Infantry Counters
    • 3.2 Armour Counters
    • 3.3 Mirrored Counters Variant
    • 3.4 Gameplay Counters
  • Common Terms
  • 4.0 Game Setup
  • 5.0 Game Turn Sequence
  • 6.0 Determine Weather
  • 7.0 Determine Command Points
  • 8.0 Determining Out of Supply Units
  • 9.0 Rally Phase
  • 10.0 Reinforcements Phase
  • 11.0 Player Controlled Zone Events
  • 12.0 Recon Phase
  • 13.0 Movement Phase
  • 14.0 New Zone Phase
  • 15.0 Combat Phase
    • 15.2 Combat Round
    • 15.2.1 First Combat Round
    • 15.2.2 Second and any Subsequent Rounds
    • 15.2.4 Resolve Artillery Strike
    • 15.2.5 Resolve Air Strike
    • 15.2.6 Resolve Unit Combat
    • 15.2.7 Infantry Counter Save Rolls
    • 15.2.8 Armour Counter Save Rolls
    • 15.3 Infantry Wounded Results Table
    • 15.4 Armour Damage Results Table
    • 15.5 Shaken and Out of Supply Counters in Combat
  • 16.0 Turn End Phase
  • 17.0 Check Victory Conditions
  • 18. Open Topped Armour Counters
  • Notes

1.0 Game Components

The game comes complete with:

  • Maps
  • Counter Sheets
  • Rulebook
  • Zone Combat Event Table
  • Zone Enemies Present Table
  • Zone Events Table
  • Varios Enemy Forces Tables
  • Scenario Books

2.0 Map Description

This is an example of one of the maps in the game.

Each scenario will specify which map to use, including:

  • Starting Point(s)
  • Objective(s)
  • Special Rules for specific zones

2.1 Map Zones

Each map is split into several Zones.

Each Zone contains the following information:

  • Zone Number (top left).
  • Maximum Number of player Infantry Counters allowed in that zone (number in the circle).
  • Maximum Number of player Armour Counters allowed in that zone (number in the square).
  • The type of terrain cover that benefits the enemy Infantry/Armour Counters (the colour of both the circle and the square).

Here is an example of a map Zone: zone number shown top left, the colour representing the cover benefit for the enemy shown top right, the number in the circle being the maximum player Infantry Counters and the number in the square being the maximum player Armour Counters allowed in the zone.

2.2 Zone Save Throw Cover Modifiers

(this will also be detailed in the Combat Section)

  • White/Very pale Green - None
  • Yellow - Medium
  • Red - Heavy

For a video description please follow https://www.youtube.com/watch?v=G68aihj8Xos

3.0 Counters Description

In the game there are the following counters:

  • Infantry Counters (the square counters)
  • Armour Counters (the rectangle counters)
  • Gameplay Counters

3.1 Infantry Counters

Here are some examples of the Infantry Counters in the game (Infantry 2/0, Airborne 3/1, Anti-Tank 0/2, Infantry 2/1, MG42 4/0 and Mortars 3/0).

Each Infantry Counter has the following information:

  • Which side it belongs to:
    • Grey Border - Axis
    • Dark Green Border - Allies
    • Cross - Axis
    • Star - Allies
  • Counter Name
  • Combat dice rolled against Infantry targets
  • Combat dice rolled against Armour targets
  • Saving Throw

The diagram on the counter shows: Border Colour, Counter Name, Combat dice rolled against Infantry/Armour targets (the first number is against Infantry, the second against Armour), Saving Throw (the number in the bottom right), and the Allied Star Symbol or Axis Cross Symbol.

3.2 Armour Counters

Here are some examples of the Armour Counters in the game (Sherman 3/2, StuG 1/3 and Panzer IV 2/3).

Each Armour Counter has the following information:

  • Which side it belongs to:
    • Grey Border - Axis
    • Dark Green Border - Allies
    • Cross - Axis
    • Star - Allies
  • Counter Name
  • Combat dice rolled against Infantry targets
  • Combat dice rolled against Armour targets
  • Any Penetration Modifier
  • Saving Throw

The diagram on the counter shows: Axis Cross Symbol, Counter Name, Combat dice rolled against Infantry/Armour targets, Armour Penetration Modifier, Border Colour and Saving Throw.

Note: Not every Counter has a value for every Statistic/Gameplay Mechanic.

3.3 Mirrored Counters Variant

Included in the game are some Counter Variants where the artwork has been mirrored. These are clearly labelled on the Counter Sheets, and no gameplay is impacted. It is purely for aesthetics and can be used to your personal taste.

Due to the nature of some of the Mirrored Counters the layout has been mirrored or changed to be sympathetic to the artwork, and the layout will differ per counter.

3.4 Gameplay Counters

Here are some examples of the Gameplay Counters in the game: Enemy Wire, Artillery Strike, Air Strike, Control, Recon, Special Rule, Out of Supply and Fox Holes.

The rules for these will all be detailed in the relevant sections.

Common Terms

Throughout the rules these are the common definitions:

  • Player - you
  • AI - the enemy forces you are playing against
  • D6 - a six sided dice. We recommend using 4 dice, with at least two being different colours.
  • Player Counters - Infantry or/and Armour Counters that belong to the player.
  • Enemy Counters - Infantry or/and Armour Counters that belong to the enemy (AI).

4.0 Game Setup

  1. Choose a Scenario from one of the Scenario Books.
  2. Gather all the player Infantry and Armour Counters detailed in the scenario.
  3. Using the map(s) as described in the Scenario place the starting Infantry and Armour Counters on the map as detailed in the scenario.
  4. Place any of the Special Rule Gameplay Counters on the map as detailed in the Scenario.

5.0 Game Turn Sequence

The game is played in a number of Turns.

  1. Move the Game Turn Counter on to Turn 1 (and for every subsequent Turn move the Game Turn Counter along 1 space).
  2. Determine Weather
  3. Determine Command Points
  4. Determine Out of Supply Units
  5. Rally Phase
  6. Reinforcements Phase
  7. Player Controlled Zone Events
  8. Recon
  9. Move
  10. Roll for New Zone
  11. Combat
  12. Turn End Phase
  13. Check Victory Conditions

6.0 Determine Weather

At the start of each turn roll a single D6.

Dice RollEffect
1-5Good Weather
6Poor Weather

On Poor Weather the player will not be able to use Artillery or Air Strikes for that turn.

7.0 Determine Command Points

In this phase the player will be rolling for how many Command Points (C.P.) that they will have for this Turn.

Each Scenario will stipulate the dice roll (and any modifiers) to determine the amount of Command Points that can be used that Turn.

7.1 Unspent Command Points in a Turn are lost, they do not carry over into any subsequent Turns.

Included in the game is a Command Point Tracker to help the player keep record of how many Command Points they have and can be moved when the player spends Command Points.

7.2 Command Points can be spent in a number of ways, and is the key mechanic for the player having to make choices and decisions in the game. Every turn the player will have rolled for their Command Points and they can be spent on:

  • 1 C.P. - Rallying any or all Infantry Counters in one Zone.
  • 1 C.P. - Rallying any or all Armour Counters in one Zone.
  • 1 C.P. - Moving any or all Infantry Counters from one Zone to an adjacent Zone.
  • 1 C.P. - Moving any or all Armour Counters from one Zone to an adjacent Zone.
  • 1 C.P. - Performing a Recon on an adjacent Zone.
  • 2 C.P. - Performing a Co-Ordinated attack in Combat.
  • 2 C.P. - re-roll ANY dice roll (can be spent numerous times on the same dice roll)
  • 1 C.P. - selecting one Air Strike
  • 1 C.P. - selecting one Artillery Strike

8.0 Determining Out of Supply Units

In this phase the player will be determining if any units are Out of Supply.

To do this simply trace a line from any of the starting Zones, moving across the map, through to each Zone where the player has any Infantry or Armour Counters. Any Zone that contains Enemy Counters blocks the Supply line.

This is an important rule (and different to a lot of wargames) you have to be able to trace a supply line across the Zones, NOT across and up or down. Here is an example:

In this example:

8.1 Zones 1, 2 and 3 are the Starting Zones. These will be from where the Out of Supply traces will be drawn from.

8.2 The Allied player Infantry Counter in Zone 8 is in Supply as a trace line can be drawn from Zone 1 through 4 and then into 8, moving across the map.

8.3 It does not matter that there is an enemy Infantry Counter in Zone 5 for that Infantry Counter in Zone 8 as a trace can be drawn through Zone 4.

8.4 The Allied Infantry Counter in Zone 9 is Out of Supply as both the Zones 5 and 6 have enemy within them. They cannot use the Zone below (Zone 10) or Zone above (Zone 8) in order to trace the Supply line. They have to be able to trace a line through either Zone 5 or 6 to be in Supply.

Note: This is a different rule to most other wargame conventions.

8.5 The Allied Infantry Counter in Zone 10 is in Supply as they can draw a Supply line starting at Zone 3 and passing through Zone 7.

8.6 It does not matter that the Enemy Infantry are in Zone 6 for that Infantry Counter in Zone 10 as a trace can be drawn through Zone 7.

8.7 All Units are either in Supply or Out of Supply and therefore only one Out of Supply Counter is applied, if applicable, to each map Zone.

9.0 Rally Phase

Any Units that are Shaken/Flipped can be rallied in this phase. Shaken/Flipped Units happen as a result (and explained in the Combat Section)

9.1 To Rally units you spend Command Points for the different types of Units for every Zone that you want to Rally.

To perform a Rally it costs:

  • 1 C.P. - Rallying all Infantry Counters in one Zone.
  • 1 C.P. - Rallying all Armour Counters in one Zone.

9.2 You do not have to Rally both types of Units (Infantry and Armour). It is the player's decision which Units are rallied and in which Zones.

10.0 Reinforcements Phase

During this phase the player will be bringing any additional Infantry or Armour Counters onto the map into the predesignated Zones.

The Scenarios will detail any Reinforcements that the player can bring into the Map.

The Scenario will also detail which Zones any Reinforcements can be bought into.

10.1 The player does not have bring reinforcements if they do not wish to, and they can be bought into subsequent Turns if the player wishes.

10.2 The player can bring reinforcements into a Zone that does have enemy counters. Combat will then be resolved in the Combat Phase as normal.

11.0 Player Controlled Zone Events

In this phase the player will roll on the Zone Events Table for every Zone that has an Player Control Counter placed on it.

11.1 For every Zone, in the player's preferred order, the player will roll on the Zone Events table.

11.2 The player will carry out the actions/results of the Table immediately and before moving to the next Zone.

12.0 Recon Phase

The player can spend Command Points to Recon eligible adjacent Zones, to find out what enemy forces, if any, are in that Zone.

12.1 Any number of eligible adjacent Zones can be Recon'd. An eligible adjacent Zone is a Zone that is adjacent to a Zone that only has player Units (so Infantry or Armour), and can be to either side, above or below but MUST be adjacent. Adjacent Zones where the Zone has both player and enemy units cannot perform a Recon.

12.2 To perform a Recon roll on the Zone Enemies Present Table (as described in the New Zone Phase). Any enemy units that are present as a result of that table are placed in that Zone (and will remain in that Zone until the player enters, if and when they wish).

12.3 It costs 1 Command Point to perform one Recon on one Zone.

12.4 When performing a Recon on an adjacent Zone place a Recon Gameplay Counter on that Zone. This will be removed in the Turn End Phase.

13.0 Movement Phase

In this phase the player can move Infantry and Armour Counters.

13.1 The player spends command points to move Infantry and/or Armour Counters from one Zone to an adjacent Zone.

It costs:

  • 1 C.P. - Moving any or all Infantry Counters from one Zone to an adjacent Zone.
  • 1 C.P. - Moving any or all Armour Counters from one Zone to an adjacent Zone.

13.2 Infantry and Armour Counters that have a Shaken counter or are Flipped cannot be moved.

13.3 Not all Counters have to be moved from the Zone - its is the player's choice.

13.4 Counters can be moved to any adjacent Zone. An adjacent Zone must be next to (either to the left, right, above or below) and must touch the Zone where the Counter currently is (before moving).

13.5 Counters cannot move through multiple Zones, or jump over Zones etc. They can only move to adjacent Zones.

13.6 Counters can only move into a new Zone if they do not exceed the Counter limitation, in that new Zone. In each Zone there is information that tells the player the maximum Number of player Infantry Counters allowed in that zone (number in the circle) and the maximum Number of player Armour Counters allowed in that zone (number in the square). The Player cannot exceed these numbers in the Move Phase.

13.7 Player Infantry and Armour Counters cannot be moved if they are in a Zone that includes enemy Infantry and/or Armour counters.

13.8 Counters can only be moved once per Turn. You cannot keep spending C.P.s to keep moving them (unless any other special rule mentions that a Unit can move again).

14.0 New Zone Phase

For every new Zone that now has Player Infantry or Armour Counters (that moved into in the Movement Phase, this Turn) and that does not have a Player Control Counter, or Recon Counter, refer to and roll on the Zone Enemies Present Table (even if there are existing enemy AI counters already present).

14.1 The player can decide the order of Zones, when rolling on the Table.

14.2 The player will place any Enemy Forces present (by additionally rolling on the Enemy Forces Table as defined by the Scenario).

14.3 As mentioned you do not roll on the Zone Enemies Present Table if there is a Player Control Counter or Recon Counter in that Zone.

15.0 Combat Phase

In this Phase the player will be carrying out Combat in Zones where there are both Player and Enemy Counters in the same Zone and is mandatory. For every zone, apply the following steps:

15.1 Firstly arrange the Counters so its a clear distinction between the two sides, such as:

15.2 The Combat Phase consists of several parts:

  1. Roll on the Zone Combat Event Table
    • Immediately resolve any outcome / event from that table roll.
    • Note: Some of the Events will impact the flow of the Combat Phase - in these instances use the rule descriptions on the Combat Events table.
  2. Spend Command Points
    • Player can spend Command Points on an Artillery or/and Air Strike. Place Artillery or/and Air Strike Counters on the player's counters in the Zone (to remind the player). Remember to check the weather - in Poor Weather, the player cannot use them that Turn.
    • Player can spend Command Points to choose their attack.

There are two types of Attack the player can choose between:

  • Normal Attack - costs 0 Command Points, but the enemy attack first.
  • Co-ordinated attack - costs 2 Command Points, allowing the player to attack first.
  1. Determine who attacks first. This will be based on the type of Attack the player has chosen and/or results of the roll on the Zone Combat Event Table. For the remaining combat in this Zone the order of the attackers does not change. For the sake of the rule description the attacker who will attack first is called the First Attacker and the attacker who will attack after is called the Second Attacker.
  2. Complete a Combat Round.
  3. Determine if there is a Combat Victor. At the end of the Combat Round determine if one side is the victor. If there is no victor repeat step 4 and then 5.

15.2 Combat Round

Once the player has chosen any Air/Artillery Strikes, combat attack and established the order of the combat then they are ready to play through a number of Combat Rounds until there is a Combat Victor.

15.2.1 First Combat Round

The First Attacker will go first and then the Second Attacker. In the first round the First Attacker will:

  • Resolves any Artillery / Air Strike
  • Resolve Unit Combat

and then the Second Attacker will:

  • Resolves any Artillery / Air Strike
  • Resolve Unit Combat

15.2.2 Second and any Subsequent Rounds

The First Attacker will go first and then the Second Attacker. Every round the First Attacker will:

  • Resolve Unit Combat

and then the Second Attacker will:

  • Resolve Unit Combat

Combat will continue in this manner, until the Zone Combat End (15.6)

15.2.3 As you can see Air and Artillery Strikes (for both sides are resolved in the First Combat Round only)

15.2.4 Resolve Artillery Strike

For a Artillery Strike roll one D6 for each Enemy Infantry Unit and any Open Top Armour Unit. Roll a D6 one at a time for each enemy target. On a 6 then roll on the Wounded or Armour Damage Results Table and apply that result for that Counter. There are no Terrain Modifiers.

15.2.5 Resolve Air Strike

For an Air Strike roll one D6 for each Enemy Armour Unit. Roll a D6 one at a time for each enemy target. On a 6 then roll on the Armour Damage Results Table and apply that result for that Counter. There are no Terrain Modifiers.

15.2.6 Resolve Unit Combat

Infantry Counters will fire on enemy Infantry Counters if possible. If there are no enemy Infantry Counters then the Infantry Counters may fire (if they can) on the enemy Armour Counters.

Armour Counters, likewise, will fire on enemy Armour Counters if possible. If there are no enemy Armour Counters then the Armour Counters may fire (if they can) on the enemy Infantry Counters.

Fire from one Counter cannot be split over multiple targets. In all cases it is the player's choice which Counters will fire on which Counters, but Infantry Counters must fire on Infantry Counters and Armour Counters must fire on enemy Armour Counters if present.

Note: If players would prefer, then use a method to randomly determine which targets are attacked if there are multiple eligible targets using a D6/coin method.

Roll the number of D6, for the type of target based on the Counters stats. (See Section 3.0) Roll for one counter at a time for each enemy target.

Note: If a Counter has a 0 (Zero) as a stat then it cannot Attack that type of target.

On any result of a 6 then that target is Hit. Hit targets can make a Save roll.

15.2.7 Infantry Counter Save Rolls

Each Infantry Counter has a Save Throw statistic on the counter (as described in Section 3.0). Roll one D6, apply any Save Throw Roll Cover Modifiers, and if the dice result is that number or higher then it has been successful and no further action is required. If it has been unsuccessful then refer to the Infantry Wounded Results Table

Infantry Counter - Save Throw Cover Roll Modifiers.

There are Modifiers to this Save Throw based on:

If the Target is the Enemy AI then that target will receive:

  • White/Very pale Green - None
  • Yellow - Medium - +1 to the dice result
  • Red - Heavy - +2 to the dice result

If the Save fails then roll on the Wounded Results Table and apply that result for that target Counter.

(Note: Only the AI receive this Modifier to the Save Throw. There are exceptions detailed in the scenario descriptions).

15.2.8 Armour Counter Save Rolls

Each Armour Counter has a Save Throw statistic on the counter (as described in Section 3.0). Roll one D6, add any Save Throw Roll Modifiers and minus any Armour Penetration Modifiers from the attacking Counter, and if the dice result is that number or higher then it has been successful and no further action is required. If it has been unsuccessful then refer to the Armour Damage Results Table

Armour Counter - Save Throw Cover Roll Modifiers.

There are Modifiers to this Save Throw based on:

If the Target is the Enemy AI then that target will receive:

  • White/Very pale Green - None
  • Yellow - Medium - +1 to the dice result
  • Red - Heavy - +2 to the dice result

(Note: Only the AI receive this Modifier to the Save Throw. There are exceptions detailed in the scenario descriptions).

Armour Penetration Modifiers

Certain Armour Counters will have an Armour Penetration Modifier (as illustrated in Section 3.2). Any modifier stat is deducted from the Saving Throw.

15.3 Infantry Wounded Results Table

For every hit Infantry Counter (that has failed its Save Throw) roll a D6.

Dice ResultImpact
1-2Pushed Back
3-6Destroyed

Pushed Back - move the Counter away from the Zone (moving away from the enemy forces). This can be in any adjacent Zone away from the enemy, that is un-occupied by the enemy. If no such Zone is possible then it is Destroyed.

In addition if it is a Player Infantry Counter then it is Shaken. The player can place a Shaken Gameplay Counter on the Infantry Counter or flip it over (player's choice - they mean the same thing). AI Enemy Infantry Counters are not Shaken, they are simply moved.

Destroyed - remove from play.

15.4 Armour Damage Results Table

For every hit Armour Counter (that has failed its Save Throw) roll a D6.

Dice ResultImpact
1Pushed Back
2-6Destroyed

Pushed Back - move the Counter away from the Zone (moving away from the enemy forces). This can be in any adjacent Zone away from the enemy, that is un-occupied by the enemy. If no such Zone is possible then it is Destroyed.

In addition if it is a Player Counter then it is Shaken. The player can place a Shaken Gameplay Counter on the Armour Counter or flip it over (player's choice - they mean the same thing). AI Enemy Armour Counters are not Shaken, they are simply moved.

Destroyed - remove from play.

15.5 Shaken and Out of Supply Counters in Combat

If there are any Shaken/Flipped Player Counters or Counters in an Out of Supply Zone, in combat then their Combat dice rolled against Infantry/Armour targets are halved (rounding up).

15.6 Zone Combat End

Combat continues in this manner until either:

  • All enemy counters are Pushed Back or Destroyed.
  • All player counters are Pushed Back or Destroyed.

The side that has Counters in the Zone at the end is considered the Victor.

16.0 Turn End Phase

During this Phase the player will:

  1. Place any Player Control Counters in any Zone where:
    • There are Player Infantry or/and Armour Counters (even if Shaken/Flipped) with no Enemy Infantry or/and Armour Counters.
    • Only one Player Control Counter needs to be placed in any one Zone.
    • The Zone must not have an Out of Supply Counter.

The game comes complete with both Allied and Axis Control Counters - simply use the ones that represent the player's forces.

  1. Remove any Player Control Counters in any Zone where there are now Enemy Infantry or/and Armour Counters.
  2. Remove all Out of Supply and Recon Counters.
  3. Remove any other Gameplay Counters as described as a result of any Table result (detailed on the Tables themselves).

17.0 Check Victory Conditions

Each Scenario will have set Victory Conditions - for example, the Scenario will finish after a set number of turns, or a number of Control Counters will need to be reached. In this phase check to see if the Victory Conditions or Scenario End conditions have been met.

18. Open Topped Armour Counters

In the Combat section we refer to Open Top Armour Counters. These are Armour Counters where the turret or structure is open topped and offers less protection to the crew from Artillery.

They include, the following Armour Counters:

  • Marder
  • M10
  • Achilles
  • Hellcat
  • Jackson

Notes

For the Kickstarter campaign we created a series of videos to help explain the key game mechanics and concepts. They can be found on our YouTube Channel: https://www.youtube.com/channel/UCjV24vVcvBwmvJUEz0zXE5g

Since making these videos we have changed some minor details etc as part of the iterative game design process. For the most part the videos give a good overview of the mechanics, but where these rules and the videos have any contradictions, in all cases, this rulebook is to be used.

v1.1 Clarifications to Out of Supply Rules (pg. 12)

Changes/additions Marked in BLUE from the previous version.

v1.2 Clarification to the Recon Phase and counter use (page 8, 9 & 12).

v1.3 Clarification to the Movement Phase (page 8). Clarifications to the Combat Phase (pages 9, 10 and 11). Language edit (page 3).

  • 15.6 Zone Combat End