The Portable Wargame
The Portable Wargame Rulebook
Table of Contents
Table of Contents
20th Century Version (Square Grid)
Equipment
The following equipment is needed to fight battles with these rules:
- A standard chessboard or a gridded battlefield that is marked with a grid that is at least eight grid squares by eight grid squares;
- Items of terrain;
- Two armies, mounted on bases that are smaller than the size of each grid square on the chessboard or gridded battlefield. The armies may not contain more Units than the number of grid squares along the side of the battlefield that the army is defending multiplied by 1½ (e.g. a chessboard has eight grid squares along its side; therefore the maximum number of Units the army can have is 8 x 1½ = 12 Units). One of the Units may be a Command Unit;
- A set of at least eight Activation Dice (See Appendix 1);
- A set of 'pin' markers to indicate Units that cannot move until they have been 'unpinned';
- Two D6 dice (one for each player).
Terrain
- Each item of terrain – such as woods, built-up areas, or hills – must fit within the bounds of a grid square on the chessboard and should, if the terrain is passable to troops, allow a Unit base to be placed in the grid square.
- The placement of a piece of terrain in a grid square indicates that entire grid square is filled by that type of terrain (e.g. a tree in a grid square indicates that the entire grid square is wooded; a building in a grid square indicates that the entire grid square is a built-up area).
- Where pieces of terrain are larger than an individual grid square (e.g. a hill) they must be sized in multiples of grid squares (e.g. two grid squares, three grid squares, or six grid squares) and be marked in squares in the same way as the chessboard.
Activation Dice
- The number of Activation Dice a player may throw each turn to activate Units in their army is determined using the following formulae:
- One Activation Dice for the Command Unit plus one Activation Dice for every three other Units in the army rounded up (e.g. A player commanding an army of eight Units will throw four Activation Dice; one for the Command Unit and three for the remaining Units).
- As a player's army loses Units, the number of Activation Dice the player may throw will decrease in line with these formulae (e.g. If a player commanding an army loses their Command Unit, they immediately lose an Activation Dice; they will also lose an Activation Dice every time the number of non-Command Units in their army is reduced to a number that is evenly divisible by three).
Pre-battle Deployment
- For 'one off' battles fought on a chessboard, each side must deploy its army within its deployment zone. These are the first two ranks of the middle six grid squares on the opposing sides of the chessboard (See Appendix 2).
- For campaign battles, each side may deploy its army within its half of the gridded battlefield, subject the rule that no Unit may start the battle in a square that is orthogonally or diagonally adjacent to one occupied by an enemy Unit.
Unit Types
| Unit Type | Movement | Close Combat Power | Weapon Range |
|---|---|---|---|
| Infantry | |||
| Infantry | 1 grid square | 4 | 2 grid squares |
| Machine Guns | 1 grid square | 4 | 3 grid squares |
| Mortars | 1 grid square | 2 | 4 grid squares |
| Infantry Guns | 1 grid square | 2 | 4 grid squares |
| Anti-tank Guns | 1 grid square | 2 | 4 grid squares |
Notes:
- No Unit's Close Combat Power may drop below 1 regardless of other rules.
- Infantry, Cavalry, and Tank Units may move forward to replace an enemy Unit after it has been successfully attacked and destroyed by Close Combat; other Units may not move forward in these circumstances.
- Artillery Units may not move during a turn in which they have fired.
Turn Sequence
- Any Artillery Unit that is within range may fire. Because artillery fire is deemed to be simultaneous, casualties are removed after all artillery fire has taken place.
- Both sides roll a D6 die to see which side will activate its Units first. The side with the highest score activates its Units first this turn and then: a. Throws its Activation Dice to determine how many Units it may activate this turn. b. Selects the Units they are going to activate, and activates each of them in turn. When activated, a Unit may move or fire; it cannot do both. (N.B. Any Artillery Units that have fired at the beginning of this turn may not be activated this turn.) c. Any Close Combats are resolved and casualties are removed.
- Once the first side has activated all the Units it may activate, the second side may activate its Units.
- Once both sides have activated their Units, the turn has ended and the next may begin.
Artillery Fire
-
Artillery fire is simultaneous; therefore if an Artillery Unit is destroyed it may still fire that turn before it is removed.
-
Artillery Units may only fire once each turn, and if they fire, they may not be activated during the same turn.
-
All artillery fire ranges are measured orthogonally (i.e. through the sides of grid squares and not through the corners of a grid squares. See Appendix 3).
-
Artillery Units fire within an arc of fire that is 90 degrees forward of the direction in which they are facing (i.e. in an arc sweeping from one 45 degree diagonal line of grid squares to the other).
-
Artillery fire can destroy any type of ground Unit.
-
Artillery Units can fire into woods, built-up areas, and fortifications.
-
Artillery Units can fire out of woods, built-up areas, and fortifications if they are in a grid square that is on the edge of the woods, built-up areas, or fortifications (i.e. the orthogonally adjacent grid square in the direction they are firing does not contain woods, built-up areas, or fortifications).
-
If an entire Unit can be seen by an Artillery Unit that is firing at it, the artillery fire is direct fire; if an entire Unit cannot be seen or it is in cover (e.g. woods, built-up areas, and fortifications), the artillery fire is indirect fire.
-
After nominating the target grid square the Artillery Unit is firing at, a D6 die is thrown:
- Die score = 5 or 6: Artillery fire lands on the target grid square.
- Die score = 1: Artillery fire lands in the grid square to the left of the target grid square (i.e. at 9 o'clock relative to the target grid square).
- Die score = 2: Artillery fire lands in the grid square beyond the target grid square (i.e. at 12 o'clock relative to the target grid square).
| Artillery fire is | D6 score | Result |
|---|---|---|
| Direct artillery fire | 5 or 6 | Destroys a Command Unit. |
| 4, 5, or 6 | Destroys any other Unit. | |
| Indirect artillery fire | 6 | Destroys a Command Unit. |
| 5 or 6 | Destroys any other Unit. |
Movement
- A Unit may only move once each turn and then only if it has been activated and has not fired.
- All movement is made and measured orthogonally (i.e. through the sides of grid squares and not through the corners of a grid squares).
- A Unit may change its direction of movement any number of times during its move.
- A Unit may move through grid squares that are:
- Occupied by friendly Units;
- Diagonally adjacent to the front, flank, or rear of an enemy Unit;
- A Unit may not end its move in the same grid square as another Unit.
- A Unit must stop as soon as it enters a grid square that is orthogonally adjacent to the front, flank or rear of enemy Unit, and both Units turn to face each other at once.
- If a Unit is being faced by an enemy Unit that is in an orthogonally adjacent grid square and the Unit has not yet been activated and moved this turn, it may move providing that:
- It is one of the Units chosen to be activated and moved this turn and
- It does not move into a grid square that is orthogonally adjacent to the front of another enemy Unit.
Non-Artillery Fire
- A non-Artillery Unit may only fire once each turn and then only if it has been activated and has not moved.
- All non-artillery fire ranges are measured orthogonally (i.e. through the sides of grid squares and not through the corners of a grid squares. See Appendix 3).
- Armoured Car and Tank Units have an arc of fire that is 360 degrees (i.e. in an arc sweeping completely around the vehicle); all other non-Artillery Units fire within an arc of fire that is 90 degrees forward of the direction in which they are facing (i.e. in an arc sweeping from one 45 degree diagonal line of grid squares to the other).
- Only Mortar and Infantry Gun Units can fire at targets that are not in direct line-of-sight; all other non-Artillery Units may only fire at targets that are in direct line-of-sight.
- Only Mortar and Infantry Gun Units may fire over other Units in front of them; all other non-Artillery Units may not fire over other Units in front of them.
- Only Mortar, Infantry Gun, Anti-tank Gun, and Tank Units can destroy Tank Units.
- Only Mortar and Infantry Gun Units can fire into woods, built-up areas, and fortifications.
- Non-Artillery Units can fire out of woods, built-up areas, and fortifications if they are in a grid square that is on the edge of the woods, built-up areas, or fortifications (i.e. the orthogonally adjacent grid square in the direction they are firing does not contain woods, built-up areas, or fortifications).
- If an entire Unit can be seen by a non-Artillery Unit that is firing at it, the target Unit is in the open; if an entire Unit cannot be seen or it is in cover (e.g. woods, built-up areas, and fortifications), the target Unit is in cover.
- A D6 die is rolled for each non-Artillery Unit that is firing.
| Target is | D6 score – Machine Guns | D6 score – All other non-Artillery weapons | Result |
|---|---|---|---|
| In the open | 5 or 6 | 5 or 6 | Destroys a Command Unit. |
| 3, 4, 5, or 6 | 4, 5, or 6 | Destroys any other Unit. | |
| In cover | 6 | 6 | Destroys a Command Unit. |
| 4, 5 or 6 | 5 or 6 | Destroys any other Unit. |
Close Combat
-
Close Combats are fought if, after a side's Units have been activated and moved, a Unit is being faced by an enemy Unit that is in an orthogonally adjacent grid square.
-
Units do not need to be activated to take part in a Close Combat.
-
If several Units move into grid squares that are orthogonally adjacent to an enemy Unit, the enemy Unit is turned to face the last Unit that moved into contact with it. This last Unit is deemed to be the attacking Unit for the purposes of resolving a Close Combat, and its Close Combat Power is used when the outcome of the Close Combat is determined. If the attacking Unit loses the ensuing Close Combat, it is the Unit that is destroyed and removed.
-
When several Units attack a single enemy Unit, the defending Unit's Close Combat Power is reduced:
- 2 attacking Units reduce the defending Unit's Close Combat Power by 1;
- 3 attacking Units reduce the defending Unit's Close Combat Power by 2;
- 4 attacking Units reduce the defending Unit's Close Combat Power by 3.
This rule is subject to the proviso that no Unit's Close Combat Power may drop below 1.
-
To determine the outcome of a Close Combat, each side throws a D6 die:
| Result | Notes |
|---|---|
| If the attacker's dice score is equal to or is less than its Close Combat Power, the defending Unit is destroyed and removed at once; If the attacker's dice score is greater than its Close Combat Power, the defending Unit survives the Close Combat. | If the attacking Unit is an Infantry, Cavalry, or Tank Unit it may move into the now empty grid square. If this results in the attacking Unit coming into contact with another enemy Unit, it may not attack the enemy Unit this turn. |
| If the defender's dice score is equal to or is less than its Close Combat Power, the attacking Unit is destroyed and removed at once; If the defender's dice score is greater than its Close Combat Power, the attacking Unit survives the Close Combat. | The defending Unit may not move into the now empty grid square. |
- If one Unit is destroyed, the surviving Unit or Units have won the Close Combat.
- If neither Unit is destroyed, the Close Combat ends as a draw. The attacking Unit must withdraw into an orthogonally or diagonally adjacent empty grid square that is not orthogonally adjacent to a grid square occupied by an enemy Unit. If it is unable to do so, it is destroyed.
- If both Units are destroyed, the Close Combat has resulted in mutual annihilation.
Special Rules
- Hills
- Units may only move up or down one hill contour each turn.
- A Unit that is attacking an enemy Unit that is one hill contour above it reduces its Close Combat Power by 1.
- Roads
- Each grid square of movement made along a road by a Unit uses up only half a grid square of movement.
- If a Unit moves along a road and then off the road during the same turn (or vice versa), any unused half-grid squares of movement are lost.
- For movement, built-up areas count as roads.
- Rivers
- Rivers may only be crossed by bridge or at a shallow spot (ford).
- Units that enter river grid squares where there is no bridge or a shallow spot (ford) are destroyed.
- When crossing a shallow spot (ford) in a river, a Unit moves into the river on turn A and stops. It remains in the river for turn B, and it then moves again on turn C.
- Units that are fording rivers (i.e. are in turn B of the above sequence) may not fire.
- A Unit that is in a river grid square and is attacking an enemy Unit that is in an orthogonally adjacent grid square reduces its Close Combat Power by 1.
- Woods
- Units attacking enemy Units that are in woods reduce their Close Combat Power by 1, even if the attacking Unit is also in the woods.
Appendix 1: Activation Dice
- The Activation Dice are D6 dice with the faces marked as follows:
- One face marked with '0';
- Two faces marked with '1';
- Two faces marked with '2';
- One face marked with '3'.
- In the absence of a set of such dice, players could use ordinary D6 dice, each score being divided by two and rounded down:
- 1 = 0;
- 2 = 1;
- 3 = 1;
- 4 = 2;
- 5 = 2;
- 6 = 3.
- It is important to note that, when using ordinary D6 dice as Activation Dice, the dice scores are not aggregated before being divided by two; each die's score must be separately divided by two and then the resultant scores are aggregated to determine how many Units a player may move.
Appendix 2: Pre-battle Deployment Zones
[Diagram in the PDF showing the deployment zones on the chessboard; the zone is described in the Pre-battle Deployment section above.]
Appendix 3: Measuring Weapon Ranges Orthogonally
- The following diagram shows the way to measure weapon ranges orthogonally.
[Diagram in the PDF; the method is given in the Artillery Fire and Non-Artillery Fire sections above: ranges are measured through the sides of grid squares, not the corners.]
Colonial Rules (Portable Wargame 2)
Turn Sequence
-
Artillery Fire
Artillery Ranges:
Artillery type Long range Short range Rifled Fortress/Siege Artillery 10 grid areas 2 grid areas Rifled Field Artillery 8 grid areas 2 grid areas Rifled Mountain Artillery 6 grid areas 2 grid areas Smoothbore Fortress/Siege Artillery 8 grid areas 2 grid areas Smoothbore Field Artillery 6 grid areas 2 grid areas Smoothbore Mountain Artillery 4 grid areas 2 grid areas a) Artillery fire is simultaneous; Destroyed Units are removed after all Artillery Units have fired. b) All ranges are measured through the edges of the grid areas not the corners. c) Each Artillery Unit may fire only once each turn. d) Roll one D6 die for each Unit firing –
Resolving Hits on Units
Any Unit that is hit as a result of Artillery Fire, Non-Artillery Fire, or Close Combat throws a D6 die to resolve what happens:
| Unit quality | Destroyed | Survives |
|---|---|---|
| Elite Units | 1 or 2 | 3, 4, 5, or 6: survive but must retreat 1 grid area. |
| Average Units | 1, 2, or 3 | 4, 5, or 6: survive but must retreat 1 grid area. Any Unit unable to retreat 1 grid area is destroyed. |
| Poor Units | 1, 2, 3, or 4 | 5, or 6: survive but must retreat 1 grid area. |
Special Rules
- Roads – Units on roads move at normal movement rate, plus 1 grid area if the entire move is made along a road.
- Hills – Add 1 to the Close Combat Power of a Unit that is attacking uphill against an enemy Unit.
- Rivers – When using a ford in a river a Unit moves into the river on turn A and stops, then moves 1 grid area out of the river on turn B. Units in rivers may not fire. Add 1 to the Close Combat Power of a Unit that is attacking out of a river against an enemy Unit on the bank.
Late 19th Century Version (Hex Grid)
For use with a battlefield marked with a grid of hexes.
General Rules
Equipment
The following equipment is needed to fight battles with these rules:
- A gridded battlefield that is marked with a grid that is at least eight hexes by eight hexes;
- Items of terrain;
- Two armies organised into Units. Each Unit should be mounted so that it can fit within one of the hexes on the gridded battlefield. Unless re-fighting an actual battle or one from an on-going wargame campaign, the armies should not contain more Units than the number of hexes along the side of the battlefield that the army is defending multiplied by 1½ (e.g. a battlefield has eight hexes along each of its sides; therefore the maximum number of Units the army can have is 8 x 1½ = 12 Units). One of the Units may be a Command Unit;
- A set of at least eight Activation Dice; (See Appendix 1)
- A set of 'pin' markers to indicate Units that have been 'pinned';
- Two D6 dice (one for each player).
Terrain
- Each item of terrain – such as woods, built-up areas, or hills – must fit within the bounds of a hex on the gridded battlefield and should, if the terrain is passable to troops, allow a Unit to be placed in the hex.
- The placement of a piece of terrain in a hex indicates that entire hex is filled by that type of terrain (e.g. a tree in a hex indicates that the entire hex is wooded; a building in a hex indicates that the entire hex is a built-up area).
- Where pieces of terrain are larger than an individual hex (e.g. a hill) they must be sized in multiples of hexes (e.g. two hexes, three hexes, or six hexes) and be marked in hexes in the same way as the gridded battlefield.
Unit Types
| Unit Type | Movement | Close Combat Power | Weapon Range |
|---|---|---|---|
| Infantry (Rifles) | 1 hex | 4 | 3 hexes |
| Infantry (Other Firearms) | 1 hex | 4 | 2 hexes |
| Infantry (Close Combat Weapons) | 1 hex | 3 | - |
| Mounted Cavalry | 2 hexes | 4 | - |
| Machine Guns | 1 hex | 4 | 4 hexes |
| Light Field/Mountain Artillery | 1 hex | 1 | 4 hexes |
| Field Artillery |
Notes on Unit Types
- No Unit's Close Combat Power may drop below 1 regardless of other rules.
- Artillery Units may not move during a turn in which they have fired.
- Dismounted Cavalry Units move and fight as if they are Infantry Units but their Close Combat Power is reduced by 1 whilst they are dismounted.
- Infantry and Cavalry Units may move forward to replace an enemy Unit after it has been successfully attacked and destroyed by Close Combat; other Units may not move forward in these circumstances.
Command Units
- Besides representing an army's command element, a Command Unit has a supportive role during combat.
- If a Command Unit is in a hex that is adjacent to a Unit that is under its command, that Unit increases its Close Combat Power by 1. In addition, that Unit will add 1 to its D6 Fire Effect scores.
Activation Dice
- The number of Activation Dice a player may throw each turn to activate Units in their army is determined using the following formulae:
- a. For European armies: One activation dice for the Command Unit plus one activation dice for every three Units (excluding the Command Unit) in the army rounded up (e.g. A player commanding a European army of eight Units will throw four activation dice; one for the Command Unit and three for the remaining Units).
- b. For Native armies: One activation dice for the Commander Unit plus one activation dice for every three Units in the army (excluding the Command Unit) rounded down (e.g. A player commanding a Native army of eight Units will throw three activation dice; one for the Command Unit and two for the remaining Units).
- As a player's army loses Units, the number of activation dice the player may throw will decrease in line with these formulae (e.g. If a player commanding a European army loses their Command Unit, they immediately lose an activation dice; they will also lose an activation dice every time the number of non-Command Units in their army is reduced to a number that is evenly divisible by three).
Unit Activation
-
The Activation Dice determine how many Units each army may activate during a turn.
-
When activated, a Unit may move or fire or be 'unpinned'.
(Notes: i. Any Artillery Units that have fired at the beginning of this turn may not move this turn but they may be 'unpinned'. ii. Regular European Cavalry Units that are 'pinned' at the beginning of a turn must either be 'unpinned' or move towards the nearest enemy Unit. iii. If a player chooses not to try to 'unpin' a 'pinned' Regular European cavalry Unit, the automatic movement towards the nearest enemy Unit does not count as a Unit activation. iv. A Unit may turn up to 60 degrees in order to fire at an enemy Unit; this turn does not count as a move for the purposes of Unit activation but the act of firing does.)
-
The only exception to this rule are Native Infantry and Cavalry Units which may make a double-length move if the player commanding them decides to use two of their Unit activations to do so. For example, a player commanding a Native army may use four activations to: a. Move four Native Infantry Units one hex each or b. Move one Native Infantry Unit a double-length move (i.e. two hexes) and two Native Infantry Units one hex each or c. Move two Native Infantry Units a double-length move each (i.e. two hexes)
Battle Rules
Pre-battle Deployment
- For 'one off' battles, each side must deploy its army within its deployment zone. These are the first two rows of hexes on the opposing sides of the gridded battlefield.
- For campaign battles, each side may deploy its army within its half of the gridded battlefield, subject the rule that no Unit may start the battle in a hex that is adjacent to one occupied by an enemy Unit.
Turn Sequence
-
Any Artillery Unit that is within range may fire. Because artillery fire is deemed to be simultaneous, casualties are removed after all artillery fire has taken place.
-
Both sides roll a D6 die to see which side will activate its Units first. The side with the highest score activates its Units first this turn and then: a. Throws its Activation Dice to determine how many Units it may activate this turn. b. Selects the Units they are going to activate, and activates each of them in turn. When activated, a Unit may move or fire or be 'unpinned'.
(Notes: i. Any Artillery Units that have fired at the beginning of this turn may not move this turn but they may be 'unpinned'. ii. Regular European Cavalry Units that are 'pinned' at the beginning of this turn must either be 'unpinned' or move towards the nearest enemy Unit. iii. If a player chooses not to try to 'unpin' a 'pinned' Regular European Cavalry Unit, the automatic movement towards the nearest enemy Unit takes place before any other Units are activated and does not count as an activation. iv. This decision to 'unpin' or not to 'unpin' a 'pinned' Regular European Cavalry Unit takes priority over all other decisions about activations and must be completed before any other activation takes place. v. A Unit may turn up to 60 degrees in order to fire at an enemy Unit; this turn does not count as a move for the purposes of Unit activation but the act of firing does.)
c. Any Close Combats are resolved and casualties are removed. d. Once the first side has activated all the Units it may activate, the second side may activate its Units and follow the procedure laid down in a, b, and c.
-
Once both sides have activated their Units, the turn has ended and the next may begin.
Artillery Fire
- Artillery fire is simultaneous; therefore if an Artillery Unit is destroyed it may still fire that turn before it is removed.
- Artillery Units may only fire once each turn, and if they fire, they may not be activated during the same turn, although they may be 'unpinned'.
- Artillery Units may fire if they are 'pinned'.
- Artillery Units may turn up to 60 degrees in order to fire at enemy Units.
- All artillery fire ranges are measured through the sides of hexes and not through the corners of hexes.
- Artillery Units fire within an arc of fire that is determined by the direction in which they are facing (See Appendix 2).
- Artillery fire can destroy any type of ground Unit.
- Artillery Units can fire into woods, built-up areas, and fortifications.
- Artillery Units can fire out of woods, built-up areas, and fortifications if they are in a hex that is on the edge of the woods, built-up areas, or fortifications (i.e. the adjacent hex in the direction they are firing does not contain woods, built-up areas, or fortifications).
- If an entire Unit can be seen by an Artillery Unit that is firing at it, the artillery fire is direct fire; if an entire Unit cannot be seen or it is in cover (e.g. woods, built-up areas, and fortifications), the artillery fire is indirect fire.
Artillery firing at targets that are two or less hexes away
-
If the range from the Artillery Unit that is firing at a nominated target hex is two hexes or less, any Unit in that hex is hit.
-
A D6 die is then rolled to determine the effectiveness of the artillery fire upon the Unit that is in the hex in which the artillery fire has landed.
-
Fire Effect: a. Direct artillery fire – 5 or 6: Destroys a Unit; 2, 3, or 4: Pins a Unit; 1: No effect b. Indirect artillery fire – 6: Destroys a Unit; 4 or 5: Pins a Unit; Any other score: No effect
(Notes: i. 'Pinned' Units reduce their Fire Effect D6 die scores by 1.)
Artillery firing at targets that are three or more hexes away
-
If the range from the Artillery Unit that is firing at a nominated target hex is three or more hexes, a D6 die is thrown: a. Die score = 5 or 6: Artillery fire lands on the target hex. b. Die score = 3 or 4: Artillery fire lands in the hex immediately in front of the target hex. c. Die score = 1 or 2: Artillery fire lands in the hex immediately behind the target hex.
(Notes: i. In cases where there are two hexes immediately in front of or behind the target hex, the odd number indicates the left-hand hex and the even number the right-hand hex.)
-
If there is a Unit in the hex that the artillery fire lands in, that Unit is hit.
-
A D6 die is then rolled to determine the effectiveness of the artillery fire upon the Unit that is in the hex in which the artillery fire has landed.
-
Fire Effect: a. Direct artillery fire – 5 or 6: Destroys a Unit; 2, 3, or 4: Pins a Unit; 1: No effect b. Indirect artillery fire – 6: Destroys a Unit; 4 or 5: Pins a Unit; Any other score: No effect
(Notes: i. 'Pinned' Units reduce their Fire Effect D6 die scores by 1.)
Movement
-
A Unit may only move once each turn and then only if it has been activated and: a. It has not fired or b. It is not 'pinned'.
(Notes: i. The only exception to this rule is that European Regular Cavalry Units must move if they are 'pinned'. ii. If a player chooses not to try to 'unpin' a 'pinned' Regular European Cavalry Unit, the automatic movement towards the nearest enemy Unit takes place before any other Units are activated and does not count as an activation.)
-
All movement is made and measured through the sides of hexes and not through the corners of hexes.
-
A Unit may change its direction of movement any number of times during its move.
-
A Unit may move through hexes that are occupied by friendly Units.
-
A Unit may not end its move in the same hex as another Unit.
-
A Unit must stop as soon as it enters a hex that is adjacent to an enemy Unit, and both Units turn to face each other at once.
-
If several Units move into hexes that are adjacent to an enemy Unit, the enemy Unit is turned to face the last Unit that moved into an adjacent hex.
-
If a Unit is being faced by an enemy Unit that is in an adjacent hex and the Unit has not yet been activated and moved this turn, it may move providing that: a. It is one of the Units chosen to be activated and moved this turn and b. It does not move into a hex that is adjacent to another enemy Unit.
Non-Artillery Fire
-
Non-Artillery Units may fire once each turn if they have not moved.
-
Non-Artillery Units may fire if they are 'pinned'.
-
Non-Artillery Units may turn up to 60 degrees in order to fire at enemy Units.
-
All non-artillery fire ranges are measured through the sides of hexes and not through the corners of hexes.
-
All non-Artillery Units fire within an arc of fire that is determined by the direction in which they are facing (See Appendix 2).
-
Non-Artillery Units can fire out of woods, built-up areas, and fortifications if they are in a hex that is on the edge of the woods, built-up areas, or fortifications (i.e. the adjacent hex in the direction they are firing does not contain woods, built-up areas, or fortifications).
-
If an entire Unit can be seen by a non-Artillery Unit that is firing at it, the target Unit is in the open; if an entire Unit cannot be seen or it is in cover (e.g. woods, built-up areas, and fortifications), the target Unit is in cover.
-
A D6 die is rolled for each non-Artillery Unit that is firing.
-
Fire Effect: a. Target is in the open – 5 or 6: Destroys a Unit; 2, 3, or 4: Pins a Unit; 1: No effect b. Target is in cover – 6: Destroys a Unit; 4 or 5: Pins a Unit; Any other score: No effect
(Notes: i. 'Pinned' Units reduce their Fire Effect D6 die scores by 1.)
Close Combat
-
Close Combats are fought if, after a side's Units have been activated and moved, a Unit is being faced by one or more adjacent enemy Units.
-
Units do not need to be activated to take part in a Close Combat.
-
If several Units move into hexes that are adjacent to an enemy Unit, the enemy Unit is turned to face the last Unit that moved into an adjacent hex. This last Unit is deemed to be the attacking Unit for the purposes of resolving a Close Combat, and its Close Combat Power is used when the outcome of the Close Combat is determined. If the attacking Unit loses the ensuing Close Combat, it is the Unit that is destroyed and removed.
-
When several Units attack a single enemy Unit, the defending Unit's Close Combat Power is reduced: a. 2 attacking Units reduce the defending Unit's Close Combat Power by 1; b. 3 attacking Units reduce the defending Unit's Close Combat Power by 2; c. 4 attacking Units reduce the defending Unit's Close Combat Power by 3.
-
This rule is subject to the proviso that no Unit's Close Combat Power may drop below 1.
-
To determine the outcome of a Close Combat, each side throws a D6 die: a. If the attacker's dice score is equal to or less than its Close Combat Power, the defending Unit is destroyed and removed at once; if the attacker's dice score is greater than its Close Combat Power, the defending Unit survives the Close Combat.
(Notes: i. If the attacking Unit is an Infantry or Cavalry Unit it may move into the destroyed Unit's empty hex. ii. If this results in the attacking Unit moving into a hex that is adjacent to another enemy Unit, it may not attack the enemy Unit this turn.)
b. If the defender's dice score is equal to or is less than its Close Combat Power, the attacking Unit is destroyed and removed at once; If the defender's dice score is greater than its Close Combat Power, the attacking Unit survives the Close Combat.
(Notes: i. The defending Unit may not move into the destroyed Unit's empty hex.)
c. If one Unit is destroyed, the surviving Unit or Units have won the Close Combat. d. If neither Unit is destroyed, the Close Combat ends as a draw. The attacking Unit must withdraw into an adjacent empty hex that is not adjacent to a hex occupied by an enemy Unit. If it is unable to do so, it is destroyed. e. If both Units are destroyed, the Close Combat has resulted in mutual annihilation.
Special Rules
Pinning
- With the exception of Regular European Cavalry Units, when a Unit is 'pinned' it stops where it is and may not move until it is 'unpinned'.
- Whilst 'pinned', the Unit is deemed to be in cover, even if it is in the open. This reflects that fact that it has 'gone to ground'.
- Whilst 'pinned' the Unit's ability to fire accurately is affected, and it reduces its Fire Effect D6 die scores by 1.
- Regular European Cavalry Units do not stop when they are 'pinned'; they move towards the nearest enemy Unit at the earliest opportunity (i.e. as soon as it is their side's turn to activate Units), and will continue to do so until they are 'unpinned'.
- This reflects the fact that Regular European Cavalry Units tend towards 'flight to the front' when they come under fire rather than seeking cover.
Hills
- Units may only move up or down one hill contour each time they are activated.
- Units may not attack enemy Units that are more than one hill contour above or below them.
- A Unit that is attacking an enemy Unit that is one hill contour above it reduces its Close Combat Power by 1.
- A Unit that is attacking an enemy Unit that is one hill contour below it increases its Close Combat Power by 1.
- Hills block line of sight except when a Unit on a hill is looking at another Unit that is on a hill that is the same height and no higher hill blocks the line of sight between the two Units.
Roads
- Each hex of movement made along a road by a Unit uses up only half a hex of movement.
- If a Unit moves along a road and then off the road during the same turn (or vice versa), any unused half-hexes of movement are lost.
- For movement, built-up areas count as roads.
Rivers
- Rivers may only be crossed by bridge or at a ford.
- Units that enter river hexes where there is no bridge or a ford are destroyed.
- When crossing a ford in a river, a Unit moves into the river on turn A and stops. It remains in the river for turn B, and it then moves again on turn C.
- Units that are fording rivers (i.e. are in turn B of the above sequence) may not fire.
- A Unit that is in a river hex and is attacking an enemy Unit that is in an adjacent hex reduces its Close Combat Power by 1.
Woods
- Mounted Cavalry Units moving through woods may only move 1 hex every time they are activated.
- Units attacking enemy Units that are in woods reduce their Close Combat Power by 1, even if the attacking Unit is also in the woods.
Built-up Areas and Fortifications
- Units attacking enemy Units that are in built-up areas or fortifications reduce their Close Combat Power by 2, even if the attacking Unit is also in the built-up area or fortification.
Appendices
Appendix 1: Activation Dice
- The Activation Dice are D6 dice with the faces marked as follows: a. One face marked with '0'; b. Two faces marked with '1'; c. Two faces marked with '2'; d. One face marked with '3'.
- In the absence of a set of such dice, players could use ordinary D6 dice, each score being divided by two and rounded down: a. 1 = 0; b. 2 = 1; c. 3 = 1; d. 4 = 2; e. 5 = 2; f. 6 = 3.
- It is important to note that, when using ordinary D6 dice as Activation Dice, the dice scores are not aggregated before being divided by two; each die's score must be separately divided by two and then the resultant scores are aggregated to determine how many Units a player may move.
Appendix 2: Arcs of Fire
- A Unit's arc of fire is determined by the direction in which they are facing. On the following diagrams, the arc of fire is indicated by the shaded area.
[Diagrams in the PDF showing the arcs of fire; not reproduced as text.]