The French & Indian War (Strategy & Tactics 352) thumbnail

The French & Indian War (Strategy & Tactics 352)

The French & Indian War (Strategy & Tactics 352) Rulebook

Table of Contents

Table of Contents

1.0 Introduction

The French & Indian War: 1754–63 is a two-player wargame of the conflict between the British and French Empires for control of North America during the wider Seven Years War. There are two opposing players: British Empire (Britain or British) and French Empire (France or French).

Each player represents the high command for their respective forces in North America. There is also the possibility for intervention by American Indian and Spanish Imperial forces. The game has several scenarios, representing different starting situations. The game system models the effects of command control on campaigns conducted across vast distances of largely frontier terrain, and as part of the larger Seven Years War.

1.1 Scale

Each game turn (GT) represents a campaign lasting one year. Each hex represents 85 kilometers (50 miles) across. Each regular unit represents one or two battalions or equivalent-sized groupings of companies/squadrons. Provincial and militia units represent regiments or brigades. Some of the light units represent detachments of one or more companies. Indian units represent groups of 500–2,000 warriors. Commanders are key leaders, their staffs, and guard troops. Riverine units represent flotillas of boats.

2.0 Components

A complete game of French & Indian War includes a 22×34-inch game map, these rules, and a sheet of 228 9/16-inch counters. Players must provide one or two six-sided die to resolve combat and other random game events.

2.1 Map

A hexagonal grid has been superimposed over the map to regularize the movement and positioning of the playing pieces. The hexagons are referred to as hexes. The map is divided into the following regions:

  • British 13 Colonies
  • British Nova Scotia
  • British Hudson's Bay Colony
  • French Canada
  • French Louisiana
  • Disputed Territory
  • Spanish Florida

Naval Bases: These boxes represent various bases in Europe and the Atlantic.

Caribbean: This box is an off-map area representing the various islands and seas in the Caribbean.

Designer's Note: The borders of some of the regions were tenuous at best.

2.2 Counters

There are two types of playing pieces (counters): combat units (military forces) and markers (informational pieces).

Designer's Note: Ranger is a general term for various types of unconventional forces on both sides.

Designer's Note: Riverine units are treated as modified ground units.

2.2.1 Combat Units

There are three categories of combat units; Line, Light, and Static.

  • Line Units: Have no box around their movement factor.
  • Light Units (Rangers and Light Infantry): Have a colored box around their movement factor.
  • Static Unit: Static units have a movement factor of zero and may not move.

Important: The reverse side of Indian and Militia units has a question mark in place of their combat factor. The question mark denotes them as an untried unit.

Militia Important: Militia units are light ground units.

Fort Important: Forts are markers representing local fortifications. They are used only with the optional rules.

2.2.2 Contingents

Each player controls several different contingents. Contingents are identified by the color of the counter and/or the Unit Type Symbol.

  • British Empire Player
    • British Regulars: Red
    • British Provincials: Orange
    • Pro-British Indians: Orange
  • French Empire
    • French Regulars: Light Blue
    • French Provincials: Dark Blue
    • Pro-French Indians: Dark Blue
  • Spanish Empire
    • Spanish Regulars: Dark Green
    • Spanish Provincials: Dark Green

2.2.3 Unit Type Symbols

Mobile Ground Line Units:

  • Line Infantry
  • Marines
  • Cavalry or Dragoons
  • Siege Train
  • Supply Train
  • Engineer/Pioneer

Mobile Ground Light Units:

  • Indian
  • Light Infantry
  • Ranger

Riverine Flotilla and Static Units are shown by their own counter symbols.

2.2.4 Unit Abbreviations

British:

  • AHAC: Ancient and Honorable Artillery Company
  • Arm Bat: Armed Bateauxmen
  • Conv: Converged
  • Corps: Corps of Rangers (represents various regular Ranger companies)
  • Drgn: Dragoon
  • GR: Grenadiers
  • HG: Honor Guard
  • HL: Highlanders
  • Ind: Independent Companies
  • LH: Light Horse
  • LI: Light Infantry
  • LB Gr: Louisbourg Grenadiers
  • Prov: Provisional
  • RA: Royal Artillery
  • RE: Royal Engineers
  • Rgr: Ranger
  • RM: Royal Marines
  • Rogers: Rogers' Rangers

Colony Names:

  • CT: Connecticut
  • DE: Delaware
  • GA: Georgia
  • HB: Hudson Bay
  • MA: Massachusetts
  • MD: Maryland
  • NC: North Carolina
  • NE: New England
  • NH: New Hampshire
  • NJ: New Jersey
  • NS: Nova Scotia
  • NY: New York
  • PA: Pennsylvania
  • RI: Rhode Island
  • SC: South Carolina
  • VA: Virginia

Designer's Note: Maine is part of Massachusetts.

French Empire:

  • CdB: Coureurs de Bois (Woods Runners)
  • CdCav: Corps de Cavalerie
  • CFM: Compagnies Franches de la Marine
  • Col: Colonial
  • LA: Louisiana
  • LB: Louisbourg
  • M: Montreal
  • Q: Quebec
  • RR: Royal Roussillon
  • Ryl: Royal
  • Mar: Marine
  • RW: Right Wing
  • St L: St Louis
  • HC: Haute Canada (Upper Canada)
  • TdM: Troupes de la Marine
  • TR: Trois Rivieres
  • Vols: Volunteers
  • Vol Etr: Voluntaire Etrengeres (Foreign Volunteers, mercenaries)
  • Voyg: Voyageurs

Spanish:

  • DR: Dragoons
  • FL: Florida Regiment

2.2.5 Markers

Fortunes of War markers (front & back) represent various military and political actions.

Designer's Note: Fleets are portrayed as Fortunes of War markers and not units per se.

Balance of Power marker. Important: Although it is the same color, the Balance of Power marker is not a Fortunes of War marker (see 8.0).

Game Turn/Initiative marker (front & back).

Outfitting Points marker (one for each side).

2.3 Charts, Tables & Displays

Charts and tables are printed on the map or included on the last page of the rules. Both players have displays to organize their Fortunes of War markers, reinforcements, eliminated units and an off-map naval base.

3.0 Terminology

Belligerent/Neutral: A belligerent is a contingent that is under player control. A neutral is a contingent that is not controlled by any player. See the scenarios.

Control of Contingents: A player controls contingents per each scenario. This means the player can recruit, maneuver and attack with those units.

Control of Hexes: A player controls a hex when friendly ground combat units occupy it (mobile or static).

Important: The requirement for units to occupy a hex to maintain control is due to independent raiders not otherwise shown, given the scale of the game.

4.0 Set Up

The set up and scenarios section (26.0) provides instructions for setting up each scenario. Players select a scenario, then set up their units and markers in the order indicated by the instructions.

5.0 Victory Conditions

There are two ways to win the game: Sudden Death and End Game Victory Points.

5.1 Sudden Death Victory

The game comes to an end if any one of the following conditions are in effect at any time in the game:

  • British Sudden Death Victory: British Empire units occupy all fortresses and towns in belligerent regions.
  • French Sudden Death Victory: French Empire units occupy all fortresses in belligerent regions plus at least 15 towns anywhere.

5.2 End Game Victory Points

At the end of the last GT of the scenario, each player totals their victory points (VP), received per the table below.

Each OccupiedBritish PlayerFrench Player
Town Hex23
Printed Fortress Hex11
Fort on the Map46

Designer's Note: French receive more VP for forts, etc., as they needed only to hang on to territory to claim a victory in the postwar negotiations. Also, Zones of Control do not gain or dispute control of hexes.

5.3 Victory Level

After totaling VP for each side, the side with the higher number is the victor. Subtract the lower number of VP from the higher number to determine victory level:

  • Imperial Victory: 21 or more
  • Marginal Victory: 6–10
  • Continental Victory: 11–20
  • Draw: 0–5

5.4 Indians & Spain

Indian units do not count for control of hexes. If Spain is a belligerent:

  • Spanish forces count for control of hexes. Otherwise, they do not.
  • Fortresses and towns in Florida count for victory and VP. Otherwise, ignore them.

6.0 Sequence of Play

French & Indian War is played in a series of Game Turns (GT). The player currently conducting a phase of a GT is the Phasing Player; the other is the Non-Phasing Player. Players must conduct all game actions in the order below.

6.1 Turn Sequence

Initiative Phase: Players determine which side has the initiative for the current GT.

Reinforcement Phase: The first player, then the second player performs each segment.

  1. Event Segment: Each player picks the number of Fortunes of War markers from their Fortunes of War Events Pool indicated by the Balance of Power Index.
  2. Scheduled Reinforcement Segment: Each player deploys any scheduled reinforcements (with a year group).
  3. Outfitting Segment: Each player gains OPs and then expends them to mobilize units.
  4. Indian Recruiting Segment: Each player builds Indian units within the restrictions at 20.0.

Naval Combat Phase:

  1. First player conducts any naval superiority combat.
  2. Second player conducts any naval superiority combat.

First Player Initial Turn:

  • Movement Phase: The first player moves friendly units via ground and naval movement.
  • Combat Phase: The first player initiates ground attacks.

Second Player Initial Turn:

  • Movement Phase: The second player moves friendly units via ground and naval movement.
  • Combat Phase: The second player initiates ground attacks.

First Player Extended Turn:

  • Movement Phase: The first player moves friendly units with leaders that have a Campaign Bonus.
  • Combat Phase: The first player initiates combat.

Second Player Extended Turn:

  • Movement Phase: The second player moves friendly units with leaders that have a Campaign Bonus.
  • Combat Phase: The second player initiates combat.

Winter Quarters Phase:

  1. Conduct any Disbanding.
  2. Conduct any Fall Backs.
  3. (Optional rules) Make attrition checks as required.

End of Turn Phase:

  1. Check for any end of GT actions.
  2. If this is the last GT of the scenario, the game ends and the players check for victory. Otherwise, move the GT marker one space on the TRT.

6.2 Campaigning

Each player has two Player Turns in each GT.

  • Initial Movement Phase: The Phasing Player can move all friendly units.
  • Extended Movement Phase: The Phasing Player can move only those friendly units which begin their movement in the same hex as a leader with a Campaign Bonus indicator (C). Additionally, the player can use friendly fleets to conduct operations per Amphibious Movement (23.4) and Naval Combat Support (23.5), but not Naval Superiority Combat (23.2).
  • A player can attack with all friendly units in both their Initial Combat Phase and the Extended Combat Phase. This is within the rule requiring attacks (see 14.3).

7.0 Theater of Operations & Alliances

7.1 Theater of Operations

The map is divided into several regions. Borders have no effects unless otherwise stated. All units can enter and operate in all regions except Spanish Florida (while neutral).

7.2 Contingents

Each player controls several different contingents. All units on the same side can operate, stack, attack and defend together. They have one common supply.

Example: A British Imperial force composed of regulars, provincials, Indians, etc. could stack and move together, etc.

7.3 Spain & Neutrality

If Spain is neutral, then:

  1. Neither player controls Spanish units. Spanish units have no ZOC.
  2. Belligerent units cannot move, retreat, or pursue into Florida.
  3. ZOC do not extend across neutral borders.
  4. Belligerent units cannot attack Spanish units.

7.4 Spanish Intervention

Spain may become a belligerent owing to Fortunes of War events. Beginning the GT that Spain becomes Belligerent:

  • All Spanish forces are controlled by the French player.
  • Spanish units have ZOC.
  • Florida fortresses, towns, and forts count as French for all game purposes.
  • Spain remains a French ally for the remainder of the scenario.
  • French supply units may be recruited in Spanish controlled hexes.

8.0 Balance of Power & Initiative

The Balance of Power Index (BPI) quantifies the overall international situation, to include happenstances from the wider Seven Years War. The BPI affects: Initiative (8.2), Fortunes of War (9.0), Outfitting (10.5–10.8), and other designated rules. Use the BPI marker to indicate the current balance of power on the BPI track (BPIT).

The BPIT indicates the number of event markers the player picks (9.0) and the number of additional OP the player receives in the current GT.

Designer's Note: The more the BPI favors a player, the more OP received (for morale, volunteers, etc.). The more the BPI favors the enemy, the more the enemy picks Event markers owing to assorted political issues.

8.1 Changing the Index

Players will change the index based upon specific circumstances and/or events. Changes take effect immediately. Shifts are made to the left when the shift is in favor of the British player and to the right when made in favor of the French player.

  1. When a player occupies a:

    • Fortress hex: Shift the index two spaces in their favor.
    • Town hex: Shift the index one space in their favor.

    Important: If due to disbanding, or withdrawal there are no longer units in a fortress or town hex, the index is shifted in favor of the opposing side (the side that did not control the town or fortress).

  2. When (while suffering no losses themselves) a player inflicts a ground combat loss on their opponent of:

    • 16–25 combat factors: Shift the index one space in their favor.
    • 26 or more combat factors: Shift the index two spaces in their favor.

    Important: When determining losses, count both the combat result and losses due to retreat into Enemy Zone of Control (EZOC) (12.0). Supply units expended for combat do not count (18.3).

8.2 Initiative

The player with Initiative is shown on the BPIT. When the BPI is at "0", initiative is retained by the player who had the initiative in the previous GT.

The player with the Initiative:

  1. Becomes the first player for the remainder of the GT.
  2. Performs special actions designated per the rules.
  • Initiative remains in effect until the next Initiative Phase, regardless if the BPI changes during the GT.
  • Flip the GT marker to the side with the Initiative.

Important: If both players are required to perform actions in the same phase, the player with the initiative goes first.

9.0 Fortunes of War Markers

During the friendly Reinforcement Phase, each player checks the current BPI. This will give the player the number of Fortunes of War Event markers that they must pick.

Important: The Fortunes of War Marker Explanation Table indicates how the markers are played. Event explanations on the Fortunes of War Explanation Table may supersede other rules.

9.1 Fortunes of War Marker Pool Procedure

Each player maintains a separate Fortunes of War Marker Pool (a wide mouthed opaque container, like an ale mug).

  • When directed by a rule, the player picks the number indicated from the pool.
  • The Fortunes of War Explanation Table lists when the marker may be played:
    • Immediately: The player must immediately reveal the marker to the enemy then implement the instructions.
    • Phase: The player may keep the marker concealed in their Fortunes of War Display and then play it in the phase listed.
  • The Fortunes of War Explanation Table indicates the status of the marker after it has been played:
    • Remains in Play: The marker remains in effect for the remainder of the game. Keep it face up in the Fortunes of War Display.
    • Remove: Permanently remove the marker from play during the End of Turn Phase.
    • Return: Place the marker back into the Fortunes of War Pool during the End of Turn Phase.
    • Friendly Naval Base: Place the fleet marker in the friendly Naval Base Display. See the naval rules (23.0).

9.2 Special Year Markers

Certain markers are initially held aside and not placed in the Pool. Players place them into their pool in the End of Turn Phase in the following GTs:

  • Caribbean Campaign: 1756. See the Caribbean Campaign rule (24.2).
  • Spanish Intervention: 1759. See the Spanish Intervention rule (7.4).

Important: This means these markers will not be picked until at least the following GT.

10.0 Reinforcements & Outfitting

Reinforcements are units received after initial set up. Placing reinforcements onto the map is called deployment. There are several ways that reinforcements enter play, indicated on the units by their reinforcement code (on the reverse of the counter):

  • Fortunes of War (FW): This unit is received due to Fortunes of War events.
  • Scheduled Reinforcements (year): These are automatically received on the Year (GT) indicated on the counter.
  • Recruited (R): These are forces raised in North America; they require the expenditure of OP. All militia units are also recruited units.
  • Indians: These are raised in friendly Indian areas per the Indian recruiting procedure (20.1).
  • Start (S): These are at-start units for 1754. Also, Militia units are in general Start units. See scenarios for details.

10.1 Reinforcement Displays

Units that begin the game as reinforcements are placed in the appropriate displays on the map.

10.2 Deployment Instructions

A player controlling a particular contingent deploys its reinforcements.

  • Deployment hexes must be friendly controlled (unless stated otherwise in the scenario rules) (3.0). They cannot be in EZOCs (12.0). See Outfitting Points Cost Chart on the map for specific deployment information.
  • Units cannot deploy in a hex in violation of stacking limits (11.0).
  • If more than one deployment hex is available, reinforcements can be divided among them.
  • Reinforcements cannot deploy in Florida if Spain is neutral. They can deploy if Spain is a belligerent within other prerequisites.
  • The number of combat unit counters provided is a limit.

Important: British provincial militia units are placed in any friendly controlled town, fortress or fort hex within the colony or area marked on the counter. French provincial militia may be placed in any friendly controlled town, fortress or fort hex originally controlled by the French. Militia units are deployed on their Untried side.

10.3 Fortunes of War Reinforcements

When an event calls for reinforcements, select the indicated units from the Reinforcement Display.

  • Deploy British, French, and Spanish on any friendly controlled fortress or port hexes, or the friendly naval base (23.0).
  • Deploy Indians per the event explanation.

10.4 Scheduled Reinforcements

Scheduled reinforcements (those with a year on the back) are deployed during the Scheduled Reinforcement Segment of the Reinforcement Phase. They may be deployed on any friendly-controlled port or off-map naval base (23.0). Scheduled reinforcements do not cost OP.

Important: For Fortunes of War and scheduled reinforcements, the deployment hex can be in regions that were originally enemy-controlled but have been captured and are now friendly-controlled.

10.5 Outfitted Reinforcements

During the friendly Outfitting Segment of the Reinforcement Phase, players receive Outfitting Points (OP) and then expend them to purchase reinforcements.

  • Use the Outfitting Points Track to record the current number of OP.
  • OP not expended in an Outfitting Segment are accumulated.
  • Accumulated OP cannot go higher than the maximum on the track or lower than 0.

Important: Events may add or reduce OP.

10.6 Outfitting Points

Players receive OP as follows:

  • The player rolls 1d6 during the friendly Outfitting Segment and adds the result to:
    • +OP#: That is shown in the box corresponding to the current balance of power.
    • +1: For each friendly-controlled fortress hex (regardless of original control).
    • +1: (British only) For each friendly-controlled town hex in the 13 Colonies and Nova Scotia.
    • +1: (French only) For each friendly-controlled town hex in Canada and Louisiana.
    • +1: For each "A" leader in a fortress or town hex that is in a region that was originally friendly-controlled (in addition to other OP for control of fortresses and towns).
  • Players can also receive OP from Fortunes of War events.
  • Florida fortresses and towns count only if Spain is a belligerent.

Important: A player gains OP for both friendly and enemy fortresses your forces control.

10.7 Outfitting Expenditure

OP expenditures are shown on the Outfitting Point Cost Chart.

  • The costs for types of units are the same for each type of unit regardless of their combat and movement factors.

Important: Certain Provincial units cost fewer OP than Regulars (Outfitting Points Cost Chart).

  • The following units can be deployed via Outfitting:
    1. All units with an "R" on the back of the counter; and,
    2. All units which were eliminated, regardless of their reinforcement code.

Designer's Note: The regular units with an 'R' code represent regiments raised in North America.

10.8 Outfitting Reinforcement Deployment

Deploy outfitted reinforcements as follows:

  • French: In any friendly-controlled fortress or town hexes in Canada and Louisiana.
  • British: In any friendly-controlled fortress or town hexes in the 13 colonies and Nova Scotia.
  • Spanish: In any friendly-controlled fortress or town hexes in Florida.
  • Indians: See 20.1 for Deployment.

10.9 Restrictions

In addition to the above:

  • Militia: Are deployed in friendly-controlled fortress, town or fort hexes that were originally controlled by the player in 1754.
  • Flotillas: Are deployed on any friendly-controlled fortress, town or fort hexes on rivers or lake hexes. This includes captured fortress, town or fort hexes (an exception to 10.8).

Important: In the standard game, the colony designation on provincial units does not affect deployment.

10.10 Replacements

Replacements are eliminated units which can be returned to play.

  • Named leaders which are eliminated cannot be replaced.
  • At Start, Scheduled, Fortunes of War and Recruited reinforcements that are eliminated or disbanded (17.1) are placed in the Outfitting Display and can be recruited using OP.
  • Indian units which are eliminated are returned to the Indian display and can be recruited per the rule.

Designer's Note: Regular units that were shattered in combat were frequently rebuilt from local levies of manpower.

11.0 Stacking

Having more than one unit in the same hex at the same time is called stacking. The maximum number of units that can stack in a hex is given on the TEC.

11.1 Stacking Restrictions

Stacking restrictions are applied at the conclusion of each friendly and enemy Reinforcement, Movement, Combat, and Fall-Back Phase.

  • If at the end of these phases a hex is over-stacked, the controlling player must eliminate excess units until stacking limits are restored.
  • There can never be more than one militia unit in a hex.
  • There can never be more than one Fort marker in a hex.
  • Leaders and markers do not count towards stacking.

Important: There are restrictions on the number of leaders that can provide bonuses (18.1).

  • All other units count as one unit each.
  • Friendly and enemy units cannot stack in the same hex.

11.2 Stacking Order

Players are free to arrange stacked units in any order they choose. They can rearrange stacks during any friendly phase.

12.0 Zones of Control (ZOC)

The six hexes immediately surrounding a ground unit's hex constitute that unit's Zone of Control (ZOC).

12.1 ZOC Negation

All mobile and static units always exert a ZOC, with the following special cases:

  1. ZOC do not extend into or out of printed fortress hexes.
  2. ZOC do not extend across all-sea or major lake hexsides (that is, the Great Lakes, not Lake Champlain).

Important: Units in forts do extend ZOC. Forts do not negate ZOC.

Example: A French force in Quebec fortress would not have a ZOC, nor be affected by the ZOC of British units adjacent to it.

12.2 ZOC Effects

There is no additional effect if more than one unit exerts a ZOC into the same hex at the same time.

  • Players cannot deploy reinforcements in an Enemy ZOC (EZOC) (10.2).
  • ZOC do not affect movement.
  • During friendly Combat Phases, the Phasing Player must attack all enemy stacks or units that exert ZOC on friendly occupied hexes.
  • ZOC affect Retreat (15.0).
  • Markers do not have ZOC.

Designer's Note: The ZOC rule represents the generally chaotic conditions of operating over vast distances and terra incognita of North America. It shows the effects of limited intelligence, extreme terrain and weather, and raiders operating beneath the scale of the game. Armies would often run into each other and fight battles without being prepared, while aggressive subordinates precipitated battles at all sorts of odds.

13.0 Movement

Each player has two separate movement phases per GT.

  • In the Initial Movement Phase: The player may move, all, some, or no friendly mobile units.
  • In the Extended Movement Phase: The player may only move units:
    1. That are stacked with a friendly "C" Leader; or,
    2. Using a forced march marker.

Important: This means that a unit can potentially move up to two times in a single GT.

13.1 Movement Procedure

A player moves units by tracing a path of contiguous hexes through the hex grid.

  • To enter a given hex, a unit must expend the number of movement factors (MF) designated by the TEC for the type of terrain in the hex.
  • A unit may continue to move until it has expended all its MF.
  • Units may be moved in any direction or combination of directions to the limits of their MF.
  • A unit may expend all, some, or none of its MF during the Movement Phase.
  • Once a unit has been moved, it may not be moved again during that phase.
  • Unused MF may not be accumulated, nor may they be transferred from one unit to another.
  • Terrain costs may be different for certain unit types (Line, Light). See the TEC.
  • If there is more than one type of terrain in a hex, use the highest single movement cost from among all the terrains involved.

Important: Friendly units may not move into hexes occupied by enemy units.

13.2 Hexsides

All-lake and all-sea hexsides affect movement (see the TEC). Borders are hexside features but units pay no extra MP cost to cross them.

13.3 Minimum Movement

Mobile units can move at least one hex per Movement Phase, regardless of terrain costs. They cannot enter enemy occupied or otherwise prohibited hexes.

13.4 Static Units

Units with a printed MF of "0" never move unless removed from the map by elimination.

13.5 Stack Movement

Players can move units individually or as stacks. The movement of a stack is that of the slowest unit within it.

  • A stack may drop off units as it moves; however, those units may then not move any farther that phase.
  • A moving unit or stack may pick up units as it moves. Those units cannot have previously moved. Further, picked up units cannot exceed their own movement allowance, nor move after the initial units in the stack completed their move.
  • If a moving unit or stack ends its move stacked with a unit that did not move with it, they form a combined stack for combat.

13.6 Extended Movement Phase

Extended movement is conducted the same way as initial movement. However, all units involved must begin the phase stacked with a friendly leader with a campaign bonus indicator.

  • The units must move along with the leader, per stack movement.
  • Units can be dropped off and picked up.

13.7 Roads & Trails

A unit that moves directly along hexsides connected by roads/trails expends the number of MF as detailed in the TEC and below, regardless of other terrain in the hex.

  • Roads: A unit that moves directly along hexsides connected by roads expends 0.5 MF per hex entered.
  • Trail: A unit which enters a trail from a connected trail or pass expends 1 MF. See also the pioneer rule (18.5).

13.8 Rivers & Minor Lakes

Rivers and minor lakes are in-hex features, not hexsides. Units do not incur additional movement costs for entering hexes containing rivers and minor lakes. See also River/Lake Movement (below) and Transport (19.4).

13.9 River/Lake Transport

Mobile units which begin their Movement Phase in a Fortress, town, or Fort hex that is on a river, minor river, or major lake may use river transport (via boats not otherwise shown in the game).

  • Units may be moved up to 20 hexes along connected river/lake hexes. Ignore any other terrain in a hex for movement.
  • This includes moving across all-lake hexsides on the Great Lakes. It does not include the St Lawrence River northeast of Quebec fortress.
  • Units using river/lake transport cannot leave river/lake hexes during the Movement Phase.
  • They cannot move into or through hexes containing enemy units.

14.0 Combat

Players conduct combat to destroy enemy forces and take objectives.

14.1 Combat Prerequisites

The Phasing Player is termed the attacker and the Non-Phasing Player is the defender. Attacking units must be adjacent to defending units.

14.2 Combat Sequence

For each individual combat, follow the below sequence:

  1. Attack Declaration: The Phasing Player declares which friendly units will be attacking which defending enemy units. For each combat, the attacker determines the CRT that will be used (14.7 & 25.0).
  2. Combat Strength Determination: See 14.7.
  3. Shift Determination: Determine shifts for terrain, leaders, and other factors.
  4. Final Percentage Determination: Consult the appropriate CRT under the corresponding percentage column heading. Apply all applicable shifts to the initial percentage column.
  5. Combat Resolution: The attacking player rolls 1d6 and cross indexes the result with the percentage column. Implement the combat results (unit eliminations, retreats, and pursuits) immediately.

14.3 Which Units Attack

All friendly units in EZOC must attack in the friendly Combat Phase, regardless of contingent or if in the friendly Initial or Extended Combat Phase.

  • Friendly units must attack all enemy units whose ZOC they are occupying.
  • Friendly units may attack all adjacent enemy units not exerting ZOC, to which they are adjacent.
  • Units cannot attack across all water hexsides (the Great Lakes, and Seas).

Important: All units can attack, including leaders, supply units and siege trains, allowing them to retreat or pursue after combat. Militia can also attack but can neither retreat (15.1) nor pursue (16.1).

14.4 Special Cases

  • Units in Fortresses: Units in a fortress are not required to attack adjacent enemy units but may do so. If they attack outside, they must attack all enemy units adjacent to their fortress.
  • Units adjacent to Fortresses: Units adjacent to an enemy-occupied fortress are not required to attack those enemy units but may do so.

Further, if there are other enemy units adjacent to the friendly force, they must be attacked.

  • If the starting percentage is less than minimum or maximum percentile columns, use the lowest and highest columns as the base line for shifts.

14.5 Attack Declarations

The attacker declares which activated units will attack which enemy units at the beginning of each Combat Phase to ensure all enemy units in a friendly ZOC will be attacked. The player also declares the order that attacks will be resolved.

  • The Phasing Player may choose which attacking units will attack which defending units, if all activated friendly units adjacent to a ZOC-exerting enemy unit participate in an attack.
  • A defended hex may be attacked from as many as six adjacent hexes, with all attacking units combined into one single attack.
  • A unit may only attack once per Combat Phase.
  • A defending unit may not be attacked more than once per Combat Phase. Exception: (15.2)

14.9.1 Terrain

Defending units benefit from the terrain in the hex they occupy as listed in the TEC.

  • If a defender has more than one defensive terrain shift available, the most advantageous defender shift is used.
  • When a single attack is made against defenders in multiple hexes, the most advantageous defender shift is used.
  • Light and Line units may have different shifts when defending. For a particular hex, apply whichever defending type has 50% or more strength points. If even, then the controlling player chooses.

14.6 Multi-Unit & Multi-Hex Attacks

If an attacking unit is in multiple EZOC, it must attack all those enemy units that are not engaged by other attacking units.

  • Units in the same stack in multiple EZOC may conduct separate attacks if all defending units are attacked.
  • Units in two or more hexes may combine their combat strengths and attack a single hex if all attacking units are adjacent to all defending units.
  • Attacks may involve any number of attacking or defending units.
  • A single unit's attack and defense strengths are always unitary and may not be divided among different combats.
  • Units defending in the same hex must be attacked as a single combined total.

14.7 Choice of CRT

There are two different CRT: Battle and Raid. The Battle CRT (BRT) represents big battles. The Raid CRT (RRT) represents a wide range of irregular warfare.

  • The attacker may always select the BRT (Exception: 20.2).
  • The attacker may select the RRT if 50% or more of the attacking combat factors are light units.
  • A force composed entirely of Indians must use the RRT.

14.8 Combat Percentage

Combat percentage is determined by dividing the attacker's strength by the defender's strength and then multiplying that result by 100. Reference the corresponding column on the CRT when rolling the die.

Example: The attacker has 20 combat factors and the defender 13, divide 20 by 13 and get 1.53. Then you multiply 1.53×100 to convert it to a percentage, which yields 153%. That combat would be resolved on the 150–199% column of whichever CRT is chosen. Do not round.

14.9 CRT Percentage Column Shifts

Certain game functions will shift combat odds. These include terrain, leaders, converging attacks, supply expenditure, siege trains (against fortresses, towns, and forts), naval support, and play of certain Fortunes of War Event markers.

  • Right column shifts increase the odds in favor of the attacker.
  • Left column shifts decrease the odds in favor of the defender.
  • If both the attacker and defender have shifts, use the cumulative difference.

14.9.2 Leaders

Each player may designate one "B" leader involved in a battle.

  • The attacker declares first, then the defender.
  • Designated leaders each provide one column shift in favor of their side.
  • No more than one leader can be used to provide shifts for a particular battle.
  • Certain combat results will cause the elimination of a declared leader (18.1 & 25.1).

14.9.3 Converging Attacks

A converging attack occurs if units are attacking defending units from:

  1. Two hexes on opposite sides; or,
  2. There are one or more attacking units each in three hexes with no more than one hex between each attacking stack.
  • A converging attack shifts combat odds one column to the right.
  • Only units taking part in the attack are considered for a converging attack, not other adjacent units that may be engaged against other enemy units.

14.9.4 Supply Train Expenditure

Each player may designate one supply unit involved in a battle and expend it, prior to calculating combat odds.

  • The attacker declares first, then the defender.
  • Expended Supply Trains each provide one column shift in favor of their side.
  • No more than one supply unit can be expended for each side.
  • A supply unit which is expended for combat does not add its combat value to their side's total.
  • If a force is composed entirely of supply units, they cannot be expended for shifts.

14.9.5 Siege Trains

Each player may designate one siege train unit involved in an attack against an enemy fortress, town, or fortress to provide a one right column shift.

  • Additionally, the defender in a fortress or fort is affected normally by retreat results that are otherwise negated by defense in a fortress.
  • No more than one shift may be applied regardless of the number of attacking siege train units.
  • Defending siege train units do not provide bonuses for the defense.

14.9.6 Naval Support

The attacker may utilize one available fleet unit to provide a one column shift for attacks against port and coastal hexes.

14.9.7 Shifts for Event Markers

Each player may play a maximum of one Fortunes of War Event marker per combat if its explanation allows for shift. These markers include tactics, and honors of war.

  • The attacker declares first, then the defender.
  • These event markers each provide one column shift in favor of their side.

14.10 Fortresses

When attacking a fortress, the attacking force must use the BRT. A force that is not qualified to make a BRT attack cannot attack a fortress.

  • Units defending in or attacking out of fortresses ignore retreat results unless the attacking force includes a siege train.
  • Units defending in fortresses ignore any CA results (see 25.0). Other units involved in the combat would conduct these normally.

15.0 Retreat

When a combat result requires a retreat, the player controlling the affected units must immediately move the units the indicated number of hexes away from their combat position.

Important: Retreat is not regular movement, and no MF are expended.

15.1 Retreat Guidelines

The player controlling the retreating units must conduct the retreat as follows:

  1. Retreating units do not pay movement costs, nor are they enhanced by road/trail/river/lake movement.
  2. All units in a stack must retreat together.
  3. Units can never retreat into hexes containing enemy units, into otherwise prohibited terrain, or across prohibited hexsides.

Important: Static units (militia) cannot retreat, they are eliminated if forced to retreat.

  • Units can retreat into EZOC. For each EZOC entered, the player must eliminate one retreating unit from the stack.
  • Units can retreat through friendly stacks (11.2). If retreating units would create an overstack, they may retreat an additional hex to meet the requirement.
  • Only light units can retreat into mountain hexes. Other units would be eliminated when retreating into mountain hexes, unless along roads/trails.
  • A retreating unit must end its retreat the indicated number of hexes away from its combat position per the result. If a unit cannot retreat the full number of hexes due to enemy units, prohibited terrain, etc., it is eliminated in the last hex into which it was able to retreat.
  • Units cannot retreat off map.
  • A unit can never retreat into a hex that would cause it to be eliminated if another retreat path is available.
  • Flotillas can only retreat along contiguous rivers and lakes. The final hex does not necessarily have to be per bullet point four (above) owing to the convolutions of rivers.

15.2 Into the Frying Pan

Units may end a retreat in an EZOC.

  • Enemy (phasing) units if they have not previously engaged in combat during that phase would then attack the retreated units.
  • If a unit retreats into a hex containing a friendly unit defending against a separate attack, it joins in the defense.
  • Attacking units that retreat cannot attack again if ending adjacent to defending units.

15.3 Abandon Materiel

The following units are eliminated if forced to retreat two or more hexes (they conduct a one hex retreat normally):

  • Siege Trains
  • Supply Trains

15.4 Fortresses

Retreat results are negated for units in printed fortress hexes (but not forts).

  • Units that retreat into a fortress cease their pursuit/retreat in that hex. This applies to both attacks and retreats.
  • If an attacking force contains a siege train, retreat results are not negated for fortresses. Retreat results are conducted normally.

Important: See the Fortunes of War and Honors of War events for a special case.

16.0 Pursuit

Pursuit is a combat result which allows attacking units to advance into a vacated defending hex.

16.1 Pursuit Guidelines & Restrictions

All mobile attacking units may pursue one hex if the combat cleared the defender's hex of all units. This must be into the hex formerly occupied by the defender.

  • All leaders, light units and cavalry/dragoons can pursue two hexes. The first hex must be the hex formerly occupied by the defender, and the second can be in any direction.
  • Static units can never participate in a pursuit.
  • Pursuit does not expend MF.
  • Only light units, rangers, and Indians may pursue into mountain terrain, unless along roads/trails.
  • Pursuing units ignore EZOC (and there is no penalty for pursuing through EZOC). If pursuing units end their move in another EZOC they cannot attack again.

17.0 Winter Quarters Phase

During the Winter Quarters Phase players must in order of initiative:

  1. Conduct Disbanding.
  2. Fall Back.
  3. (optional) Check for Supply Attrition.

17.1 Disbanding Procedure

In step 1) of the Winter Quarters Phase, each player:

  1. Must remove all Indian units from the map and place them in the Indians Display.
  2. Must remove all provincial infantry (line and light) units from the map and place them in the Units for Outfitting Display.
  3. May remove any other friendly units from the map and place them in the Units for Outfitting Display.

Important: Only provincial line infantry and light infantry units are disbanded (not rangers, engineer, or militia units). This represents the tendency to return home when enlistments were up or to bring in the harvest.

17.2 Fall Back Procedure

In step 2) of the Winter Quarters Phase, each player must pick up all remaining units that are not located in fortresses, towns, forts, or in hexes with friendly supply units (if the player decides to expend the supply unit) and redeploy them on the map as detailed below.

Important: A player may expend one supply unit in a hex to keep all friendly units in the hex from falling back.

  • Each side must move fall back units into friendly controlled fortresses, towns, or forts that meet the below requirements:
    • British: Units must be placed in the 13 Colonies or Nova Scotia.
    • French: Units must be placed in Canada or Louisiana.

For both British and French:

  • Hexes into which units fall back cannot be in an EZOC.
  • Units already in locations specified above are left in place.
  • There is no movement involved, and distances do not matter.
  • If there are no available fallback locations, the units are instead eliminated.

17.3 Fall Back Special Cases

  • Provincial leaders and rangers in friendly or neutral Indian Tribe hexes may remain in place (they may fall back).
  • Militia do not fall back. They remain in place. The controlling player may disband militia.

Designer's Note: Provincial troops tended to go home after their enlistments were up or were returned home for harvest. Indians usually fought for one season then returned to their settlements.

18.0 Specialized Units

18.1 Leaders

Leaders generally function as mobile combat units. They move using the Light movement terrain costs. Leader Command Bonuses are indicated on the left side of the counter:

  • A=Admin Bonus: Add one OP to the player's total OP if located in a fortress or town during a friendly Outfitting Phase. The hex must be in an originally friendly region.

Important: Only one leader per hex or per combat may provide bonuses.

  • B=Battle Bonus: Add CRT column shifts in both attack and defense.
  • C=Campaign Bonus: Can initiate an extended movement for itself and any units with which it is stacked (13.6).
  • A-C: The leader has both the Admin Bonus and the Campaign Bonus, but not a Battle Bonus.
  • Each time a leader is eliminated for any reason the owning player must make a check on the Leader Casualty Table. Roll 1d6 and cross index the results (below).
    • WIA: Place the leader on the TRT in the next GT box. It is received as a reinforcement at no OP cost. Deploy per outfitted reinforcements (10.0).
    • KIA: Leader is permanently removed from play.
  • Leader Displays: Players may place combat units in the same hexes as leaders in the corresponding Leader Display off the map. The leader remains on the map. The units in the Leader Display are considered on the map and can be transferred back and forth during any friendly phase or for combat (this is to reduce counter congestion and enhance fog of war).

18.2 Light Units

Light units (with highlighted movement factors) have the following special capabilities:

  • Movement: Light units pay reduced costs to enter certain terrain (See TEC).
  • CRT Selection: The presence of light units in an attack allows for selection of the RRT or BRT (14.7 & 25.0). Also, the presence of light units in the defense may provide different combat shifts (See TEC).

18.3 Siege Trains

Siege trains have the following special capabilities:

  • Combat: In addition to their combat factor, siege trains provide one right column shift on the BRT (maximum of one shift per combat) when attacking fortress, town, or fort hexes. Siege trains can do this by themselves or in conjunction with other friendly units in an attack. Siege trains provide no defensive CRT shifts, and do not enhance the RRT.
  • Loss of Guns: If a siege train receives a retreat result and the result calls for a retreat of two or more hexes, it is instead eliminated. This elimination takes place prior to any other losses being extracted.

18.4 Supply Trains

Supply trains may be expended to provide combat shifts (14.9.4), to avoid fall back (17.2), and supply attrition (optional).

  • If a supply train receives a retreat result and the result calls for a retreat of two or more hexes, it is instead eliminated. This elimination takes place prior to any other losses being extracted.
  • If defending supply trains are eliminated (as result of combat) and the attacker advances into their former hex, roll 1d6:
    • 1–3: No Effect
    • 4–6: Place a friendly supply unit of the same contingent as the pursuing force in the hex (if available).

Important: If a supply train or siege train is in a situation where retreat is negated, it is not eliminated. Also, if eliminated in a retreat into an EZOC, there is no capture check.

18.5 Engineers/Pioneers

If an engineer unit is part of a stack moving along a trail (or a combination of road and trail), the force pays one-half the movement cost to enter each hex. This applies only if the engineer is moving with the stack, and to the engineer moving by itself.

  • (Optional rules) An engineer unit reduces the OP cost for building a fort.

18.6 Marines

Special Movement: Marines can move from a friendly port to a friendly controlled port without a fleet. This consumes marine units' entire movement. Up to one leader can move with a Marine unit. Marines cannot move to a naval base or Caribbean Off-Map Area by themselves (23.4 & 24.2).

  • Attack Bonus: If a force containing marine units attack an enemy port, shift the combat one to the right. The shift is made regardless if the force made an amphibious assault or not.

Important: Various French light units are termed Marines, but these are not amphibious qualified. This was a term referring to the Marine (Naval) Ministry under whose command they served.

19.0 Inland Flotillas

Flotillas are special ground units (they are not fleets) that can only move on river and lake hexes and across major lake hexsides. Flotillas may move an unlimited number of hexes; however, they must comply with movement and stacking restrictions noted below.

19.1 Flotilla Deployment

Players deploy flotilla reinforcements on friendly controlled fortress, towns and forts on river and lake hexes.

Important: This includes captured fortress, towns and forts on river and lake hexes.

19.2 Flotilla Operations

Flotillas are treated as ground units, but can move only on lake and river hexes, including those containing towns or other terrain features, and across major lake hexsides.

  • If moving via a major lake, they must end their movement on a lake coast hex or on a river hex which they later enter. This movement is per river/lake movement (13.9).
  • Flotillas exert a ZOC (12.0).
  • Flotillas can be part of a stack containing non-flotilla units.
  • Flotillas can move through hexes containing enemy ground units but cannot stop in such hexes.
  • Flotillas cannot move through hexes containing enemy flotillas.
  • Flotillas cannot end their move on a hex that contains enemy units.
  • Flotillas cannot move on the oceans.

19.3 Combat

Flotillas engage in combat normally with the following special cases:

  1. Flotillas can retreat and pursue only along contiguous river or lake/sea hexes.
  2. Flotillas can attack units on any hexes, not just contiguous rivers/lakes.

19.4 Transport

Each flotilla can transport up to three mobile ground units plus any number of leaders.

  • The flotilla and transported units must start the Movement Phase in the same hex.
  • The units move together and may move an unlimited number of hexes. The flotilla and transported units may move through hexes containing enemy units but may not end the move in such a hex.
  • The transported unit may be debarked at any time during such a move. They can move no further.
  • A flotilla can conduct only one transport per Movement Phase.
  • Flotillas are always supplied. They do not fall back.
  • Flotillas act as supply units for units in their hex for purposes of Fall Back (17.2), but are not expended. They do not conduct other supply operations. (That is, the presence of a flotilla in a hex prevents the units in it from falling back.)

20.0 Indians

Indians function as light combat units.

Important: An Indian unit by itself (including Indian leader) does not count for control of a hex (5.4).

20.1 Recruiting & Deploying Indians

Designate one or more hexes containing a friendly provincial leader or ranger unit located in a friendly or neutral Indian tribal hex. For each 1 OP expended, randomly pick one Indian unit from the Indian Display, and place it in the hex.

  • British recruit pro-British Indians, French recruit pro-French Indians.
  • No more than one Indian unit can be recruited per hex per Outfitting Phase.

20.2 Indian Characteristics

Indians are untried units.

  • Indians automatically disband during the Winter Quarters Phase; they cannot be maintained by supply or other means. This includes Pontiac.
  • If all units in a force are Indians, they cannot be involved in an attack using the BRT. They can only be involved in attacks using the RRT.

Important: This means Indians by themselves cannot attack fortresses.

20.3 Indian Leader Pontiac

Pontiac can provide combat shifts (14.9.2) and extended movement capability only for forces containing entirely Indian, or Indian plus French provincial units.

Important: Pontiac is the only untried leader in the game. He is considered a standard Indian unit when randomly picking an Indian unit to mobilize, moving, and when withdrawing Indian units. Once Pontiac is revealed he operates as a leader. Treat Pontiac as a leader when determining status after combat.

21.0 Untried Units

Units with a question mark in place of a combat factor on their reverse side are untried units.

  • Players place all untried units face down (question mark side up) in their appropriate displays. When recruiting an untried unit, randomly pick and deploy it so that the untried side is showing.
  • Neither player can examine untried units (including their own).
  • Untried units otherwise operate as mobile/static units (units with MF of 0 are static).
  • Players reveal untried units (flipped face up) the first time they engage in combat.
  • Untried units remain revealed until eliminated or disbanded, at which point the owning player returns them to the appropriate display on their unrevealed side.

22.0 Fog of War

Players can always examine their own units (Exception: 21.0). Players can examine the contents of their opponent's stacks only under the following circumstances:

  • Players may examine all enemy units in the ZOC of friendly units at the start of each Combat Phase and before any combat. (This may be useful in allocating attacks.)
  • Players cannot examine the contents of the Fortunes of War Pool, or the other player's markers.

23.0 Fleets & Naval Operations

Naval operations are shown via their effect on campaigning in North America. Naval operations include naval superiority, amphibious movement, and naval support of ground combat.

Important: Fleets are not units. They do not count against ground unit stacking, nor do they have ZOC.

23.1 Fleet Markers

Fleets are represented by fleet markers drawn from the Fortunes of War Pool.

  • When a player picks a fleet, place the marker in the friendly Naval Base Display (face up).
  • Fleets remain in the display until removed in combat (or other events). They may be temporarily placed on the map for amphibious movement and combat support.
  • At the conclusion of each operation, flip the fleet face down and place it in the friendly naval base. It cannot be used again in the GT.
  • Operations include:
    1. Naval Superiority Combat
    2. Amphibious Movement
    3. Naval Combat support
  • During the End of Turn Phase, flip all face down fleets to their face up-side. They can be used in the ensuing GT.

23.2 Naval Superiority Combat

During the friendly Naval Combat Phase, a player may launch one naval attack with available fleets. This combat occurs off map.

  • The Phasing Player is the attacker; the Non-Phasing Player is the defender.
  • The attacker can use one or more fleets. The defender must use all fleets.
  • Consult the Naval Superiority Table. Each side's strength is the total of its committed fleets. Subtract the defender's strength from the attacker's strength to get a differential. Use the differential to determine which column to use on the Naval Superiority Table. Roll 1d6, and cross index the result with the results on the table. Then apply the result.
  • Leaders and other shifts do not affect Naval Warfare.

Important: The initiative player decides to launch a naval attack first, then the non-initiative. Thus, there can be up two naval combats in a GT.

Table Errata: Use the Naval Superiority Table below. The map table is incorrect.

Naval Superiority Table (Attacker Fleets minus Defender Fleets)

Die Roll−2−1012
1A1A1A1A1E1
2A1A1E1E1—
3A1———D1
4——E1D1D1
5—E1D1D1D2
6E1D1D1D2D2

23.3 Naval Superiority Results

  • —: No Effect
  • A1: The attacker returns one fleet to the pool.
  • D1: The defender returns one fleet to the pool.
  • D2: The defender returns two fleets to the pool.
  • E1: The attacker and defender each return one fleet to the pool.

23.4 Amphibious Movement

During the friendly Movement Phase, a player may use available fleets to move mobile ground units.

  • Each fleet can move up to ten units and an unlimited number of leaders from:
    1. Any one port or naval base to any one port occupied by friendly ground units or to a naval base; or,
    2. Any one port or naval base to any one coastal hex; or,
    3. Any one coastal hex to any one port or naval base.

Important: This means either the embarkation or disembarkation hex must contain a port or naval base.

  • Transported units must complete the move on land or the naval base.
  • Transported units can conduct no other movement in the same phase. They can attack normally in the ensuing Combat Phase if other conditions apply.
  • The disembarkation hex cannot contain enemy units. Transported units cannot attack from all sea hexes.
  • Ground units can conduct an amphibious movement in either Movement Phase (must be with a "C" leader to use extended movement).

23.5 Naval Combat Support

During the friendly Combat Phase, the attacking player may add one available fleet to the combat. The fleet provides a one favorable column shift to the attacker.

  • At least one enemy ground unit must be defending on a coastal or port hex.
  • A fleet can provide naval support in either Combat Phase (no leaders are required).
  • Fleets are never affected by ground combat.
  • Fleets do not otherwise count as ground units.
  • Fleets cannot be used in defense.

24.0 Off-Map Naval Bases & Caribbean Campaign

Players may under certain circumstances move units to their naval base; further, the British may under the circumstances conduct a Caribbean Campaign.

  • Naval bases and the Caribbean have port facilities.
  • Units in naval bases and the Caribbean are always in supply.
  • They are qualified for extended moves without a leader.
  • Only British units can enter the British naval base and the Caribbean.
  • Only French units can enter the French naval base.
  • Units cannot fall back to or from a naval base or the Caribbean.

24.1 Naval Bases

The off-map naval bases are a convenient place to deploy fleets and off-map reinforcements that are not otherwise deployed onto the map.

  • Ground units can be transported to them by fleets.
  • A player can maintain an unlimited number of units in a naval base or the Caribbean. Such units are always in supply.

24.2 Caribbean Campaign

The Caribbean Display represents the theater of operations off to the south of the map. In general, units cannot move to and from the Caribbean. When the Caribbean War event occurs, the British player must decide to do one of the following during their Initial Movement Phase.

  • Do Nothing: In this event, the French win the Caribbean Campaign (with off-map forces). During the End of Turn Phase:
    1. The French player rolls 2d6 and totals the results. The French player receives that number of OP.
    2. The British player rolls 1d6 and loses that number of OP.
  • Dispatch an Expeditionary Force: Move one British leader plus British regular infantry units (any type) equal to at least 15 combat factors to the Caribbean Display via amphibious movement. During the End of Turn Phase:
    1. The British player rolls 2d6 and totals the results. The British player receives that number of OP.
    2. The French player rolls 1d6 and loses that number of OP.

Important: If the British player does not have an available fleet, then the British player must choose Do Nothing.

24.3 Return of the Caribbean Expedition

On any ensuing GT, the British player may move the units in the Caribbean back to the map via amphibious movement. This movement requires an available British fleet.

25.0 Combat Results

Combat results are listed below for each table. Apply results in the order listed. When unit eliminations are called for, the choice of which involved units to eliminate is the choice of the player controlling the affected force.

25.1 BRT Results

  • AE (Attacker Catastrophe): Eliminate all attacking units.
  • AD (Attacker Defeated):
    1. Attacker eliminates 50% of combat strength points (round up).
    2. All remaining attacking units retreat two hexes.
  • BB (Bloodbath):
    1. The side with fewer combat factors is eliminated. The other side must eliminate units that are at least an equal number of combat factors. If both sides have the same strength, then all units are eliminated.
    2. If all defending units are cleared from the hex, any surviving attackers may pursue.
  • CA (Counterattack):
    1. Each side eliminates one unit; then,
    2. The defender must immediately launch a counterattack (25.3).
  • DD (Defender Defeated):
    1. The defender eliminates 50% of combat strength points (round up).
    2. All remaining defending units retreat two hexes.
    3. Attacker may Pursue.
  • DE (Defender Catastrophe):
    1. Eliminate all defending units.
    2. Attacker may pursue.
  • (*): Player affected by the result selects and eliminates one leader involved in the combat; if a leader provided a combat bonus, then that leader must be chosen; otherwise, any leader will do. For AM or CA, both sides lose one leader. This loss is in addition to any other losses for the combat.

25.2 RRT Results

  • A1: Attacker eliminates one unit.
  • A2r:
    1. Attacker eliminates two units.
    2. Retreat all surviving attackers one hex.
  • AM (Ambush): Defender must immediately launch a counterattack.
  • D1:
    1. Defender eliminates one unit. Surviving units retreat one hex.
    2. If all defending units are cleared from the hex, the attacking units may pursue.
  • D2r:
    1. Defender eliminates two units.
    2. Retreat all surviving defenders one hex.
    3. Attacker may Pursue.
  • D3r:
    1. Defender eliminates three units.
    2. Retreat all surviving defenders one hex.
    3. Attacker may Pursue.

25.3 Ambush & Counterattack

An AM or CA result on a CRT produces a special set of combat conditions in that defending units must immediately counterattack one attacking hex as selected by the defender. This combat is resolved on either the BRT or RRT (14.7), (counterattacking player decides) with the following special cases:

  • If the original defender was in a fortress, the combat comes to an end.
  • Counterattacking and ambushing units receive one right column shift during combat resolution.
  • Apply CRT shifts for leaders (if applicable). No other shifts are applied.
  • If another CA or AM is rolled, then no action occurs and the combat ends (i.e., no losses are taken).
  • Counterattacking and ambushing units may conduct pursuit.
  • If the original attacking force wins the combat, it cannot pursue.

Errata

Counter Errata:

  • Leaders Lignery, Langlade, and Beaujeau are "S" start units and should have an "S" on their backs.
  • The French Grenadier unit is an "R" reinforcement.
  • The French Irish unit should be a 3-5 (not 5-5).
  • Pro-French Indians are a separate contingent from French Provincials.
  • Pro-British Indians are a separate contingent from British Provincials.

Map Errata:

  • There should be a trail running from hex 1822 (Fort Cumberland) to hex 1723.
  • Outfitting Point Cost Chart: The three columns for Flotilla should read: "Flotilla—2—Fortress, Town or Fort on a river or lake".
  • The Optional Outfitting Point Cost Chart is not on the map but included at the end of 29.0.
  • See 23.2 for a corrected Naval Superiority Table.

26.0 Scenario I: Opening Drums 1754

This scenario starts with the initial British and French moves into the Ohio Valley.

26.1 Administration

  • Game Length: The game starts on GT 1 (1754) and ends on GT 3 (1756).
  • Balance of Power: 0 (Neutral).

26.2 French Empire (set up first)

Initial Forces:

  • Militia: 1× unit in each fortress and town in French Canada and Louisiana.
  • Louisbourg (0805): 1× 4-5 light infantry.
  • Quebec (0714) or Montreal (0917): Leader Vaudreuil; 1× 4-5 light infantry (Quebec Light Infantry unit).
  • New Orleans (3233): Leader Kerlerec; 1× 4-5 light infantry.
  • Any towns or forts in Canada or Louisiana: (no more than 1× per hex) 8× 2-6 rangers (French Regulars).
  • Any French forts or pro-French Indian hexes in Canada: Leaders Langlade, Lignery, Beaujeau; 1× 2-6 ranger.
  • Louisbourg (0805), Quebec (0714) or New Orleans (3233): 1× 6-4 siege train.
  • Reinforcements Display: All remaining French start units (S).
  • Units for Outfitting Display: French reinforcement units (R).
  • Pro-French Indians: Any pro-French Indian hex: 1× Indian.
  • Fortunes of War Markers: None.
  • Starting OP: Roll 1d6.

26.3 British Empire (set up second)

Initial Forces:

  • Militia: Place no more than 1× unit in any town or fortress in the 13 Colonies, Hudson's Bay, and Nova Scotia. Place units in the colony/Nova Scotia matching the unit's unit identification.
  • Halifax fortress (1008) and/or Port Royal (1010): 3× 5-5 infantry, 1× 2-8 ranger.
  • Any towns in New York: 1× 4-4 infantry, 1× New York provincial infantry.
  • Boston (1414): Leader Shirley, 1× 4-4 infantry, 1× Massachusetts provincial infantry.
  • Any British towns, no more than 1× per hex: 3× 2-4 infantry.
  • Any towns in Virginia: Leader Washington, 1× Virginia provincial light infantry.
  • Any British towns or forts: Leader Johnson.
  • Pro-British Indians: None.
  • Reinforcements Display: All remaining British start units (S).
  • Units for Outfitting Display: British reinforcement units (R).
  • Fortunes of War Markers: 1× Fleet.
  • Starting OP: 1.

26.4 Spanish Empire (set up by French)

Initial Forces:

  • San Augustin (3025): 1× Leader Coronel, 1× 4-4 infantry.
  • Any fortresses, forts, or towns in Florida: 1× 4-4 infantry, 1× 2-6 cavalry, 2× militia.
  • Reinforcements: None.

26.5 Scenario Special Rules

  1. The British player has the initiative on GT 1.
  2. On GT 1, both players skip their Events Phase. In the Outfitting Phase, they can build only supply but no other units.

27.0 Scenario II: Braddock's Defeat 1755

This scenario starts with the 1755 multi-pronged British offensive and continues through to 1758, this being the period of French ascendancy.

27.1 Administration

  • Game Length: The game starts on GT 2 (1755) and ends on GT 5 (1758).
  • Balance of Power: 1 (French).

27.2 British Empire (set up first)

Initial Forces:

  • Militia: Place no more than 1× unit in any town or fortress in the 13 Colonies, Hudson's Bay, and Nova Scotia. Place units in the colony/Nova Scotia matching the unit's unit identification.
  • Halifax fortress (1008) and/or Port Royal (1010): 3× 5-5 infantry, 1× 2-8 ranger.
  • Any towns in New York: 1× 4-4 infantry, 1× New York provincial infantry.
  • Boston: Leader Shirley, 1× 4-4 infantry, 1× Massachusetts provincial infantry.
  • Any British towns: (no more than 1× per hex) 3× 2-4 infantry.
  • Any towns in Virginia: Leader Washington, 1× Virginia provincial light infantry.
  • Any British towns or forts: Leader Johnson.
  • Reinforcements Display: All remaining British start units (S) and 1755 reinforcements.
  • Units for Outfitting Display: British reinforcement units (R).
  • Pro-British Indians: None.
  • Fortunes of War Markers: 1× Fleet.
  • Starting OP: 0.

27.3 French Empire (set up second)

Initial Forces:

  • Militia: 1× unit in each fortress and town in Canada and Louisiana.
  • Louisbourg (0805): 1× 4-5 light infantry.
  • Quebec (0714) or Montreal (0917): Leader Vaudreuil, 1× 4-5 light infantry.
  • New Orleans (3233): Leader Kerlerec, 1× 4-5 light infantry.
  • Duquesne (1724): Leader Beaujeu, 1× 2-6 ranger.
  • Any towns or forts in Canada or Louisiana: (no more than 1× per hex) 8× 2-6 rangers.
  • Any French forts or pro-French Indian hexes in Canada or Louisiana: Leaders Langlade, Lignery.
  • Louisbourg (0805), Quebec (0714) or New Orleans (3233): 1× 6-4 siege train.
  • Reinforcements Display: All remaining French start units (S) and 1755 reinforcements.
  • Units for Outfitting Display: French reinforcement units (R).
  • Pro-French Indians: Any 1× pro-French Indian hex: 1× Indian.
  • Fortunes of War Markers: Tactic.
  • Starting OP: Roll 1d6.

27.4 Spanish Empire (set up by French)

Initial Forces:

  • San Augustin (3025): 1× Leader, 1× 4-4 infantry.
  • Any fortresses, forts or towns in Florida: 1× 4-4 infantry, 1× 2-6 cavalry, 2× militia.
  • Reinforcements: None.
  • Indians: None.

27.5 Scenario Special Rules

  • British have the Initiative on GT 1 (regardless of the Index).

28.0 Scenario III: Grand Campaigns

Players decide on any one scenario and then play it through to the end of 1763.

29.0 Optional Rules

Designer's Note: Historically, there was considerable conflict on both sides between regular and provincial forces, and conventional and unconventional leaders. On the other hand, as the war went on, provincials were increasingly kept in the field. Therefore the following...

29.1 Regular & Provincial Forces

29.1.1 Regular & Provincial Leaders

  • A regular leader can only provide combat and movement bonuses for a stack, consisting of 50% or more of regulars.
  • A provincial leader can only provide combat and movement bonuses for a stack of 50% or more of provincials.
  • All unit types count for this rule, including leaders.
  • Indians count as Provincials for this rule.

Important: Determine percentage of units, not combat factors.

29.1.2 Pitt Event

For the British, the restrictions in 29.1.1 are lifted when the British Pitt event goes into effect. For the remainder of the game, both regular and provincial British leaders can command any type of units.

Important: French leaders are bound by 29.1.1 for the entire game.

29.1.3 British Provincial Forces

British provincial units with a colony indicator must be deployed in the corresponding colony (this includes the 13 Colonies and Nova Scotia). Those without a colony indicator can be deployed in any of the 13 Colonies or Nova Scotia.

  • When Provincials Fall Back, they must be placed in a fortress, town, or in their home Colony. If none are available, they are eliminated and placed in the Reinforcement Display.

Important: The French are not bound by this rule.

29.1.4 Maintaining Provincials

Players do not have to automatically disband Provincial infantry. Instead, they can pay 1 OP per Provincial unit that remains on the map. Such units Fall Back per regulars rule.

29.2 Rogers Rangers

The Rogers Rangers can move in the Extended Movement Phase, regardless of Leaders.

  • Other Ranger units stacked with Rogers Ranger unit can also move with the Rogers Rangers unit. They must all move together.
  • Non-Ranger units stacked with Rogers Rangers require leaders for extended movement.

Designer's Note: Rogers Rangers were a unique unit in the British military establishment, raised as a quasi-regular force, while Rogers himself showed a high degree of initiative.

29.3 River/Lake Movement

The following units can start a river/lake movement on any river/minor lake hex without having to start on a fortress, town, or fort:

  • Light Leaders
  • Marines
  • Rangers
  • Indians

29.4 Building Forts

Players build Forts in the friendly Outfitting phase. The player designates a hex containing a friendly mobile combat unit, expends the designated OP, and places a Fort marker in the hex (See the Optional Outfitting Point Cost Chart on the back cover).

  • Any friendly ground unit can build a Fort, other than Leaders and Indians.
  • Engineer/Pioneers units pay lower OP costs. (See the Outfitting Table).
  • Forts can be built only in hexes containing Settled and Wilderness. They cannot be built in a hex containing other Fort markers.

29.4.1 Fort Operations

Fort markers are treated as printed forts with the following special cases:

  1. Cost to enter the hex for friendly units is 1 MP (representing cleared terrain). Road and Trail movement is normal.
  2. A fort marker remains in play if there is a friendly ground unit in the hex (any type). The instant that there is no friendly unit in the hex, the marker is removed. (Thus, a player cannot capture and use an enemy Fort marker.)
  3. A player may remove any friendly occupied Fort marker during any friendly Disbanding phase.
  4. Fort markers are not units, have no ZOC, and cannot move. They do not count for VP.
  5. Eliminated Fort markers become immediately available for building.
  6. The number of Fort markers in the game is not a limit. Players can construct additional markers as needed.

29.5 Demolitions

Players may destroy certain terrain features via Demolitions.

29.5.1 Procedure

The player must have a mobile combat unit in a hex containing a fortress or printed fort at the start of the friendly Disbanding phase (before any other actions in that phase). Roll 1d6 and check below:

  • Demolishing force contains pioneers: 1–5 = success.
  • Demolishing force does not contain pioneers: 1–3 = success.
  • Only one demolition attempt may be made per hex per Disbanding Phase.

29.5.2 Effects of Demolition Markers

Treat the hex as wilderness. Ignore any printed fortress or fort in the hex. Demolition Markers are printed on the back of fort markers.

29.5.3 Duration of Demolition

A demolition marker remains on the map until the fortress or fort is rebuilt.

Important: A Fort marker cannot be deployed on a Demolished hex.

29.5.4 Rebuilding Demolished Hexes

A player may remove a Demolished marker by having a mobile combat unit in a hex during the friendly Outfitting Phase. Expend the designated number of OP and remove the marker (See the Optional Outfitting Point Cost Chart on the back cover). The hex is restored as a printed fortress or fort.

Important: Leaders and Indians by themselves cannot remove a Demolition marker.

29.6 Supply Attrition

Players are not required to Fall Back their units in the Winter Quarters phase. They can leave any or all units in the hex. If the hex does not contain a Fortress, Fort, or Town, then the player must check each remaining unit for Attrition. Roll one die for each unit and compare it to the Supply Attrition Table on the following page.

Supply Attrition Table

Unit typeDR to surviveDR for elimination
Leader, Ranger, Light Infantry, Supply1–45–6
All other unit types1–34–6

Special Cases: Provincial Leaders in friendly and neutral Indian hexes do not check; they automatically survive. Leaders eliminated via Attrition make a Leader Casualty Check.

Naval Supply is an additional mission for Fleets and counts against the one mission per furn per fleet. During the friendly Supply phase, the player can move a Fleet from the Available display to any coastal hex (in order of initiative). All friendly units in the hex are In Supply. Further, those ground units are not required to Fall Back.

  • A player cannot place a Fleet in a hex already containing an enemy Fleet.
  • The Initiative player can place a Fleet in a hex containing enemy units to prevent the enemy from providing Naval Supply.

Optional Outfitting Point Cost Chart

Unit TypeOPDeploy
Fort marker (with pioneer)2Settled, Wilderness hexes
Fort marker (without pioneer)4Settled, Wilderness hexes
Remove Demolition marker from a Fort hex (with pioneer)2Fort hex
Remove Demolition marker from a Fort hex (without pioneer)4Fort hex
Remove Demolition marker from a Fortress hex (with pioneer)4Fortress hex
Remove Demolition marker from a Fortress hex (without pioneer)6Fortress hex

Fortunes of War Explanation Table

EventWhen playedExplanationDisposition
Caribbean Campaign (1757 or later)ImmediatelySee the Caribbean Campaign rule.Remove
Embassy to VersaillesAny time during a Friendly Outfitting PhaseRoll 1d6 and receive that number of OP. Also, deploy the 1 FW reinforcement unit (if available).Return
EpidemicImmediatelyEach player rolls 1d6 & deducts that number of OP from their Index. Also, each player picks 1 Fortunes of War marker from their Available Display and returns it to their pool. (This does not affect Remains in Play events.)Return
EspionageAny friendly phaseExamine all enemy stacks in 1 region (including Leader Displays); or, examine all enemy Fortunes of War markers in the Fortunes of War Display.Return
Famous Victory in EuropeImmediatelyRoll 1d6: Odd result: Shift the Index 2 in favor of the French and French gain 3 OP. Even result: Shift the Index 2 in favor of the British and British gain 3 OP.Return
FleetFriendly Outfitting PhaseSee Fleet rules.Friendly Naval Base
Forced MarchFriendly Extended Movement PhaseSelect 1 friendly stack and conduct an extended move, regardless of leaders.Return
Frontier AflameFriendly Outfitting PhaseFrench pick 2 Indian units from the Indians Display; deploy them on any pro-French or neutral Indian hex or hexes. The hex does not have to contain a French leader but cannot be British controlled. British lose 2 OP.Return
Honors of WarFriendly Combat PhasePlay during any attack against an enemy fortress, fort, or town prior to the DR. If the combat result is BB, DD, or DE, neither side takes any losses and defender retreats two hexes (fortress does not negate defender retreat for this rule). Treat AE and AD results as no effect. Defending units may retreat through enemy ZOC (but not enemy units).Return
PittImmediatelyBritish receive 2 additional OP each Outfitting Phase for remainder of scenario. Optional rules: British regular and provincial leaders can command all forces.Remains in play
Sneak AttackFriendly Combat PhasePlayer force (which must contain at least one Indian or Ranger unit) gains 1 favorable shift when attacking an enemy force in a fortress, fort, town, settled, or Indian Tribal hex. After combat is completed, the enemy picks 1 Fortunes of War marker (violation of customs of war!).Return
Spanish Intervention (1760 or later)ImmediatelySpain becomes a French controlled belligerent. French receive 1 additional OP each Outfitting Phase for remainder of scenario. See Spanish Intervention rule.Remains in play
TacticFriendly or Enemy Combat Phase1 player force gains 1 favorable shift for combat resolution (attacking or defending).Return
Unite or Die!Friendly Outfitting PhaseBritish immediately recruit & deploy 2 provincial units & 1 supply unit (at no cost).Return
French/British Option—For future variants. Do not use in standard scenarios.—