RulesPal
Chat
Rulebook
Tactiques Napoléon thumbnail

Tactiques Napoléon

Tactiques Napoléon Rulebook

Table of Contents

Table of Contents

  • Introduction
    • 1.1 Game Scale
    • 1.2 Game Modules
    • 1.3 Standard 1d10
    • 1.4 Standard Retreat
    • 1.5 Standard Rounding
  • Rosters
    • 2.1 Army Commands
    • 2.2 Echelon Commands
    • 2.3 Brigade Commands
  • Leaders
    • 3.1 Leader Values
  • Units
    • 4.1 Unit Values
    • 4.2 Unit Facings
    • 4.3 Unit Formations
    • 4.4 Formation Types
    • 4.5 Artillery
    • 4.6 Multi-hex Formations
    • 4.7 Detached Companies
  • Stacking
    • 5.1 Stacking and Movement
    • 5.2 Stacking and Combat
    • 5.3 Stacking and Morale
  • Morale
    • 6.1 Disruption
    • 6.2 Morale Checks
    • 6.3 Task Checks
    • 6.31 List of Task Checks
    • 6.4 Panic Checks
  • Casualties
    • 7.1 Unit Casualties
    • 7.2 Leader Casualties
    • 7.3 Special Loss Check
  • Turn Sequence
    • 8.1 Sequence of Play
      • Event Phase
      • Command Phase
      • Activation Phase
      • Resolution Phase
      • Rally Phase
      • Turn End
    • 8.2 Victory Conditions
  • Command Phase
    • 9.1 Command Range
    • 9.2 Order Acceptance
    • 9.3 Order Issue
    • 9.4 Leader Initiative
    • 9.5 Order Issue Restrictions
    • 9.6 Independent Commands
    • 9.7 Reinforcements
    • 9.8 Activation Determination
  • Orders
    • 10.1 Attack Order (A)
    • 10.2 Engage Order (E)
    • 10.3 Maneuver Order (M)
    • 10.4 Reserve Order (R)
  • Activation Phase
    • 11.1 Activation Draw
    • 11.2 Melee Declaration
    • 11.3 Offensive Fire
    • 11.4 Movement
    • 11.5 Defensive/Opportunity Fire
  • Reaction
    • 12.1 Re-Align
    • 12.2 Fall Back
    • 12.3 Form Up
    • 12.4 Reaction Charge
    • 12.5 Counter Charge
  • Resolution Phase
    • 13.1 Melee Resolution
    • 13.2 Melee Results
    • 13.3 Pursuit
    • 13.4 Recall
    • 13.5 Cavalry Readiness
  • Rally Phase
    • 14.1 Fatigue
    • 14.2 Cavalry Recovery
    • 14.3 Rally
    • 14.4 Commitment
  • Terrain
    • 15.1 Line of Sight
    • 15.2 Blocking Terrain
    • 15.3 Hindrance Terrain
    • 15.4 Sloping Terrain
    • 15.5 Broken Terrain
    • 15.6 Special Terrain Types
    • 15.7 Night/Dusk/Dawn
  • Grand Abilities
    • 16.1 Grand Assaults
    • 16.2 Grand Batteries
    • 16.3 Grand Charges
  • Fog of War
    • 17.1 Masking
  • Miscellaneous
    • 18.1 Split Units
  • Quick Reference Charts
    • Command Modifiers
    • Check Results
    • Order Effects Chart
    • Formation Change
    • Special Movement
    • LoS Ranges
    • Retreat Distances
    • Skirmish
    • Fire Notes
    • Fire Modifiers
    • Fire Results
    • Morale Modifiers

Introduction

1.1 Game Scale

  • Each Turn represents twenty minutes of actual time.
  • Each hex is approximately 120 meters across.
  • An infantry increment represents approximately 100 men.
  • A cavalry increment represents approximately 50 troopers.
  • An artillery increment represents 3 to 4 guns depending on nationality.

1.2 Game Modules

All TN modules come with Rosters for each opposing army which detail the makeup and organization of a player's forces and are used to keep track of casualties, Leader losses, morale, etc.

  • 1.21 The identification and Movement Allowance of leaders and units are the only values still used from the published counters. All other factors, including unit strengths, are updated on the Rosters.
  • 1.22 Modules include special rules, Terrain Charts, Events, deployment set-ups and reinforcement schedules which supersede those of the published games.
  • 1.23 Ignore leaders or unit counters not specified in the Rosters, they are not used.

1.3 Standard 1d10

These rules use a 1d10 die to generate a number from 1 to 10.

  • 1.31 Natural rolls of 1 are detrimental and can generate Command Paralyses, Low Ammo, Lost Orders, etc.
  • 1.32 Natural rolls of 10 are beneficial and can generate Special Loss roll, extra hits, ricochet hits, etc.
  • 1.33 Momentum Determination and Melee Results rolls use 1d10/2 (round up) generating a result of 1 to 5.

1.4 Standard Retreat

Apply the following rules to all retreats as they occur.

  • 1.41 Retreats are measured in hexes not Movement Points and may be into any terrain unless noted Impassable on the Terrain Chart for that unit type.
  • 1.42 Units use the following retreat rates in all instances:
    • Infantry in Skirmish formation Fall Back (12.2): 1 hex.
    • Infantry and foot artillery: 2 hexes.
    • Cavalry and horse artillery: 4 hexes.
    • Artillery that retreats must Limber (no roll required).
  • 1.43 Units must retreat locally to the rear (no doubling back), towards their designated Depot (1.47). In case of ambiguity, retreat units in the following order of priority:
    • A. Into a hex more distant from the nearest enemy unit than the hex retreated out of. If not possible then,
    • B. Into a hex not adjacent to an enemy. If not possible then,
    • C. Into a hex adjacent to an enemy unit in March or Skirmish formation. Each retreating unit gains Disruption (6.1). If not possible then,
    • D. Into a hex adjacent to an enemy unit in any other formation. Each retreating stack (not unit) suffers 1 increment casualty and gains Disruption (6.1). If not possible then,
    • E. Into an enemy-occupied hex. Each unit in retreating stack is captured, eliminate all remaining increments.
    • F. Units and Leaders forced to retreat off map are eliminated.

1.5 Standard Rounding

  • 1.51 When determining Melee Odds (13.1C), round in favor of the defender.
  • 1.52 In all other circumstances when calculating fractions, round up.

Rosters

Each player needs a printed copy of his army's Roster. This will comprise of one or more pages organizing the various formations into logical Army, Echelon and Brigade Commands.

2.1 Army Commands

Army Commands detail:

  • The name of the Army bounded in a colored box and in Bold.
  • The name of the army Leader along with his Leader Values and Command Range in Bold and bounded by a colored box.
  • A listing of Leaders and units, if any, directly subordinate to that Army.

2.2 Echelon Commands

Echelon Commands detail:

  • The name of the Echelon Command bounded in a box and in Bold.
  • The name of the commanding Echelon Leader along with his Leader Values and Command Range. An Echelon Leader with their name in Bold may issue Orders using Leader Initiative (9.4).
  • A listing of Leaders and units, if any, directly subordinate to the Echelon Command.

Design Note: Corps, Wings, Columns and Divisions are Echelon Commands. Some Echelon Commands, Corps for example, may themselves have one or more Echelon Commands such as Divisions subordinate to them.

2.3 Brigade Commands

Brigade Commands detail:

  • The name of the Brigade Command.

  • The name of the Command's Leader along with his Command rating. Brigade Leader names in italics are Inherent and not represented by a counter. Brigade Leader names not in italics are represented by physical counters.

  • An Order box, where a Command's Pending (grey box) and Accepted (white box) Orders are noted. Brigade Commands need Orders (10.0) to function and must have an Order in their Accepted Order box at all times.

  • A row of Fatigue circles. Commands accumulate Fatigue (14.1) as a battle wears on.

  • A Reserve Rating (10.31). Commands in Reserve are easier to command and bolster the sturdiness of their army.

  • A row of Shattered boxes. Generally one for each unit in the Command. A Command suffers negative modifiers when Shattered (7.13).

  • A listing of units, directly subordinate to that Brigade.

  • 2.31 Brigade leaders specified in the Rosters and not in italics are physical counters and are used like any other Leader in the game.

Design Note: Brigade Leaders are for the most part inherent and are assumed to be stacked with a unit of their Brigade. Some modules, late Prussian Army for example, have a physical counter representing the Leader and are not identified in italics.

Leaders

Leaders represent personages along with their staffs who fulfill important command and morale functions.

  • 3.01 Leaders have no facing or formation and do not count for stacking in any way. They do not add to fire combat and are unaffected by Disruption (6.1).

Design Note: La Bataille and SimTac games use tactical Leader modifiers which have no function when using TN rules. Use only Leaders specified in each module. Leaders available in the published game but not detailed in the Rosters are not used.

  • 3.02 An Army or Echelon Leader may supersede a Brigade Leader when stacked with any unit of that Brigade. The Army or Echelon Leader may thereby use his Command Rating instead, for any Order Acceptance (9.2) or Commitment checks (14.4) required by that Brigade Leader.

3.1 Leader Values

Leader Values are read as follows:

  • The first value represents a Leader's Command Rating ranging from 1 (worst) to 4 (best). The second value represents a Grand Ability, if any. They are:
    • A = Grand Assault (16.1)
    • B = Grand Battery (16.2)
    • C = Grand Charge (16.3)
    • +1 = A Leader with this ability increases the Command Rating of any one Leader stacked with by + 1.
    • Tilde "~" = No Grand Ability.
  • The last number represents the Leader's Morale modifier, ranging from 0 to 4 used as a positive modifier in all Morale and Task checks for units Leader is stacked with.
  • Echelon Leaders have a Command Range (9.5) in Movement Points.
  • The leader's special role, if any, such as Chief of Staff (9.14), Aide-de-Camp (9.6), and Artillery or Cavalry Commander (6.02) as listed on Roster.

Units

Units are combat formations of infantry, cavalry, and artillery. They have a facing, may enter into different formations and are subject to stacking and Disruption rules. A unit will usually but not always represent an infantry battalion, a cavalry regiment or an artillery battery.

Design Note: TN does not make use of La Bataille regimental presentation counters.

  • 4.01 Units Movement Allowances remain unchanged from those printed on the counter.

4.1 Unit Values

Unit Values are read as follows:

  • The unit's name.
  • The unit's Morale value used as a positive modifier to all Morale and Task checks.
    • Units with their Morale in asterisks are Elite and ignore Morale modifiers for being Disrupted (6.1).
    • Units with their Morale in square brackets are [Untrained]. They may not move while in Square formation, expend 2 x Movement Points to change Formation (4.31) and may not attempt to Form Up (12.3).
  • The unit's Fire value. A value with two numbers indicate an artillery unit's Fire value and Long Range (4.54). A tilde "~" indicates that a unit may not fire.
    • A unit with its Fire value in (parentheses), [brackets] or asterisks indicates that it may deploy in Skirmish formation. Units in (parentheses) have a Fire range of 2 hexes. Units in [brackets] have a Fire range of 3 hexes. Units in asterisks double (x2) their Fire value when in Skirmish formation.
    • Example: A unit with a value of [x 1] has a range of 3 hexes and doubles its Fire value to x 2 when firing in Skirmish formation.
  • The unit's Melee value, used to determine Melee strength in Assaults and Charges.
    • Units with their Melee value in asterisks are Sappers, ignore negative Melee Modifiers when assaulting Fortifications (15.62) and may stack with infantry without requiring the presence of a Leader (5.04).
    • Cavalry units with a +# after their Melee value are Lancers and may use this lance modifier when they are the attacker in any Charge. The lance modifier is not applicable if the lancer unit is defending.
    • Cavalry with a Movement Allowance of 12 or less are considered Heavy Cavalry. They double their Melee Value (x 2) when resolving Melee against Light Cavalry which have a Movement Allowance of 13 or more.
  • A unit's size measured in increments (each box represents approximately 100 infantry, 50 cavalry or 3 to 4 cannon) along with a Shattered "$" mark.

Roster examples (the sample unit entries illustrated on page 3 of the printed rules) are not reproduced; the notation above is fully described in the text.

4.2 Unit Facings

All units must be aligned so as to "face" a hexside or vertex. Facing defines the stack's front, flank and rear hexsides.

  • 4.21 All units stacked in a hex must have the same facing.
  • 4.22 When a unit changes formation (4.3) it must do so with the same relative facing.
  • 4.23 It costs 1 Movement Point per vertex or hexside facing change. Exception: Limbered Artillery and units in March formation pay 0 MP for facing changes.
  • 4.24 Units marked with a MELEE marker may only change facing in its originating hex.
  • 4.25 Units may freely adjust their facing after retreating to a new hex.
  • 4.26 Fire may only be traced out of the firer's frontal hexes and never through its flank or rear hexes.
  • 4.27 Units may only move through their front hexsides. Exceptions being:
    • Retreats.
    • Retrograde Movement, Movement By Flank and Prolong (11.48).
  • 4.28 Apply flank/rear modifiers to any fire, Assault or Charge entering via an unsupported Flank (4.29), unless fire is entering the target hex exactly along a hexside dividing front from the flank hexes.
  • 4.29 Supported Flank: A unit is considered to have a Supported Flank when the hex is also the front hex of a friendly unit in formed formation (Column, Line, Square General and/or Unlimbered artillery). If a unit has a Supported Flank ignore all modifiers imposed by the presence of enemy combat units or fire directed through that flank hex.

4.3 Unit Formations

Units may be deployed in various tactical formations throughout a battle. A unit wishing to change formation in a hex may do so before, during or after moving to a new hex.

  • 4.31 It costs the following Movement Points to change formation:
    • Infantry: 1 MPs (Untrained: 2 MPs)
    • Cavalry: 2 MPs (Untrained: 4 MPs)
    • Artillery: 3 MPs.
  • 4.32 Units may only change formation once during Movement.
  • 4.33 Infantry and artillery units may not change formation adjacent to enemy cavalry, unless Forming Up (12.3) or retreating.
  • 4.34 Units that change formation adjacent to an enemy unit trigger Opportunity Fire (11.5), unless Forming Up (12.3) or retreating. Units that change move out of General Terrain (4.46) do not trigger Opportunity Fire but do trigger Defensive Fire.

4.4 Formation Types

  • 4.41 Column: Infantry and cavalry units in Column formation are oriented facing a hexside and have 3 front, 2 flank and 1 rear hexside. Infantry units in Column may fire up to 2 increments per hex and have a fire range of 1 hex. Cavalry in Column may not fire.

  • 4.42 March: Infantry and cavalry units in March formation are oriented facing a hexside, have 1 front, 4 flank and 1 rear hexside. Units in March formation may not fire, may use Roads, Trails, Bridges and Fords and may never stack with other units. Use a MARCH marker to identify units in this formation.

  • 4.43 Line: Infantry and cavalry units in Line formation are oriented facing a hex vertex and have 2 front, 2 flank and 2 rear hexsides. Infantry units in Line may fire up to 4 increments per hex and have a fire range of 1 hex. Cavalry in Line may not fire. Infantry and cavalry in Line pay double (x2) the Terrain Movement Point cost to move into a hex.

  • 4.44 Square: Only infantry may form into Square. They are oriented in any way desired as they have all around front hexsides. Use a SQUARE marker to identify units in this formation. Units in Square may fire up to 3 increments per hex, but each increment is limited to firing at every other adjacent hex with a fire range 1 hex. Infantry in Squares pay triple (x3) the Terrain MP cost to move into a hex. [Untrained] infantry may not move when in Square formation. Units in Square formation required to retreat must enter Column, Line or General formation depending on the Terrain retreated to.

  • 4.45 Skirmish: Infantry and cavalry units in Skirmish formation face either a hexside (5 front and 1 flank hexside), or a hex vertex (4 front and 2 flank hexsides), owning player's choice. (Exception: Units in Skirmish formation must orient itself with any infantry or cavalry it is stacked with.) Units in Skirmish formation may fire up to 3 increments per hex. Units with their Fire value in (parentheses) have a fire range of 2 hexes. Units with their Fire value in [brackets] have a fire range of 3 hexes. Units with their Fire value in double their Fire Multiplier (x2) when in Skirmish formation. Flip units to their verso side to identify units in Skirmish formation.

4.5 Artillery

Unlimbered artillery units are oriented facing either a hexside (3 front, 2 flank and 1 rear hexside), or a hex vertex (2 front, 2 flank and 2 rear hexsides), owning player's choice. (Exception: artillery must orient itself with any infantry or cavalry it is stacked with.) Flip units to their verso side to identify Unlimbered artillery units. Limbered artillery units face in any desired way as they have all around flank hexsides.

  • 4.51 For stacking purposes (5.1), each increment of artillery is the equivalent of 4 increments of infantry or cavalry.
  • 4.52 Unlimbered artillery may only fire, change facing and/or Limber. They may not move except to Prolong, see 4.57. Limbered artillery may only move and/or Unlimber; they may not fire.
  • 4.53 Unlimbered artillery units may fire up to 4 increments per hex.
  • 4.54 Artillery Range:
    • Close Range: 1 hex. Artillery double (x 2) their Fire Value when firing at adjacent targets. (Exception: Fortifications).
    • Effective Range: 2 to 5 hexes. Artillery use their Fire Value when firing at units within this range.
    • Long Range: 6 to # hexes. Artillery halve (x 1/2) their Fire Value when firing at units within this range, whereas the # equals the maximum hex range indicated by the unit value on their Roster (4.1).
    • Unlimbered artillery in General formation or stacked with a Square formation may only fire at Close range (i.e.: at adjacent targets).
  • 4.55 Limbered artillery may use Roads, Trails, Bridges and Fords, ignoring the Movement Point cost of the other terrain in the hex.
  • 4.56 Artillery units must pass a Task Check to voluntarily Limber (6.31B).
  • 4.57 An Unlimbered artillery unit may Prolong 1 hex (and change Facing) in any direction instead of Limbering and moving (11.48). An artillery unit may not Prolong into a hex adjacent to an enemy unit or Impassable Terrain.
  • 4.58 Low Ammo: When artillery fires and obtains a natural 1 result, it must cross out one of its Low Ammo circles. When an artillery unit is the target of Counter-Battery Fire (11.34) which rolls a natural 10, it must cross out one of its Low Ammo circles. When all Low Ammo circles of an artillery unit are crossed out it is considered Low Ammo and may no longer fire at Effective Range. It may continue to fire at Close Range and conduct Defensive and Opportunity Fire.

4.6 Multi-hex Formations

Units in Line or Skirmish formations may deploy into 2 hexes. Such Multi-hex formations are oriented facing a hex vertex. Multi-hex Line formations have 3 front, 2 flank and 3 rear hexsides for Line. Multi-hex Skirmish formations have 5 front and 3 rear hexsides.

  • 4.62 Increments must always be divided evenly between hexes of a Multi-hex formation, (owning player's choice which has an extra increment if an odd number). If the unit is reduced to 1 increment, reduce the unit back to a single hex formation (player's choice which hex).
  • 4.63 Units pay the terrain MP cost of the hex moved into to form a Multi-hex formation and vice-versa when collapsing into a single hex unit. (Exception: Artillery may move in or out of Multi-hex Formations at no MP cost and without requiring to Limber.)
  • 4.64 The entire unit suffers adverse morale results should either hex of a Multi-hex formation be affected.
  • 4.65 Leaders stacked with a Multi-hex formation are considered in both hexes for purposes of Command Range, use of their Morale value and as the potential target of a Special Loss result (7.3).
  • 4.66 A Multi-hex unit which Forms Up (12.3) into either Square or Column formation must collapse into a single hex (owning player's choice which hex).
  • 4.67 Both hexes of a Multi-hex formation suffer the consequences of an Assault or Charge when defending.
    • Example: A Multi-hex unit is Assaulted on its right hex. It may only use half of its increments to defend in the ensuing Melee. If it loses the Melee, the entire unit would suffer any adverse consequences.
  • 4.68 A Multi-hex formation may fire (11.3) at two separate target units in their respective front facing hexes. If both hexes of a Multi-hex formation fire at the same target they must combine their increments into a single attack.
    • Example: The French Garde at left in Multi-hex Line fires both hexes (6 increments) at the Prussian 1st battalion. The French Garde unit at right in Multi-hex Skirmish formation fires its left hex (3 increments per player choice) at the Prussian 2nd battalion. Its right hex fires 2 increments at the 3rd Prussian battalion.

4.7 Detached Companies

Some infantry units, as indicated by the letters 'DC' after their increments in the Rosters, may deploy one or more Detached Companies in their present hex at no Movement Point cost.

Design Note: Although Detached Companies are usually detached to form Skirmishers, they can change into any formation. They may move, declare Assaults, etc., just like regular infantry.

  • 4.71 When a Detached Company is available in the counter pool, place the appropriate Detached Company unit at the bottom of the stack in the same hex, Disruption, formation and facing, as the parent unit.
  • 4.72 Detached Companies have 1 increment. When a unit deploys a Detached Company it must circle the right most increment box on its Roster to reflect the deduction of 1 increment.
  • 4.73 If a Detached Company is lost due to casualties, erase the circle on the parent unit's increment box and slash out a box to the left of the Shattered mark to indicate the loss as a Detached Company.
  • 4.74 Infantry units may deploy as many Detached Companies as they have available in the counter pool or as detailed in the module special rules. The last increment of a unit may never be deployed as a Detached Company.
  • 4.75 A Detached Company may be absorbed by a parent unit at no Movement Point cost as soon as both occupy the same hex (including retreats). Erase the left most circled increment box from the parent unit's Roster and remove the Detached Company unit from the map.

Stacking

Stacking is placing more than one unit in a hex. Stacking is enforced at all times and units may not illegally stack, even temporarily. When discovered, all units of an illegally stacked hex gain Disruption (6.1) and must immediately Displace (1.48) units into legal stacks.

  • 5.01 Refer to each module's Terrain Chart for increment stacking limits. This is the maximum number of increments that can occupy a hex. In all cases, one unit of any increment size may be in a hex regardless of Terrain stacking limit.

  • 5.02 Leaders do not count for stacking and any number can occupy a hex.

  • 5.03 Each increment of artillery is the equivalent of 4 increments of infantry or cavalry when calculating stacking.

    • Example: A 2 increment artillery unit stacked with a 6 increment cavalry unit would create a 14 increment stack.
  • 5.04 Units may only stack with units of their own regiment except:

    • Units may stack with units of other regiments if also stacked with a Leader.
    • Artillery units may only stack with other artillery units (even if of their own regiment) if also stacked with a Leader.
    • Detached Companies (4.7) in Skirmish formation may stack with any friendly unit.
    • In addition to the above, any 1 artillery unit may stack with an infantry or cavalry unit.
    • Sappers (units with their Melee value in asterisks) may stack with any infantry unit.
    • Units in March formation may never stack with any other unit.

5.1 Stacking and Movement

  • 5.11 Units in different formations may stack together with the top unit of the stack determining facing for the entire stack.
  • 5.12 Stacking order may be altered anytime during Movement, retreats, Advance Before Combat (12.23), Advance After Combat (13.23) and the Reaction Phase (12.02).
  • 5.13 Infantry or cavalry may stack with artillery.
  • 5.14 Units may never stack with, or move through enemy units.
  • 5.15 When a unit with Disruption (6.1) moves through another unit or stack, that unit or stack assumes that Disruption state and vice versa, in addition to any illegal stack effects.

5.2 Stacking and Combat

  • 5.21 Only the top unit in a stack may fire. (Exception: Grand Batteries, see 16.2).
  • 5.22 The top infantry/cavalry unit of a stack suffers all casualties incurred from fire, Assaults or Charges. However if the top unit of the stack is artillery and 2 casualties occur, the artillery suffers the second loss.
    • Example: Artillery firing on an enemy artillery unit stacked on top of an infantry unit in Column would be resolved as Artillery (not Counter-Battery Fire) using the +1 'target in Column formation' modifier. The infantry unit would suffer the first casualty, if any, and the artillery unit suffer any additional casualties.
  • 5.23 Stacks of mixed formations suffer the worse target modifier of any formation in the stack.
    • Example: A unit in Skirmish formation stacked atop a unit in Column would suffer a +1 target modifier and not x1/2 for being in Skirmish.
  • 5.24 A hex containing the equivalent of 9 increments or more suffers a +1 target modifier when fired upon for every 9 increments in the stack.
    • Example: A unit with 18 increments would suffer a +2 target modifier.
  • 5.25 Only the maximum number of increments able to be in a hex may Assault or Charge that hex when determining Melee Odds (13.1C).
    • Example: Some fortification hexes have a stacking limit of 6 increments. Such a hex may only be Assaulted by a maximum of 6 increments. Any remaining increments would be ignored.

5.3 Stacking and Morale

  • 5.31 The top unit in a stack provides the Morale value for that stack's Morale Checks. All units stacked under this unit suffer the consequences of that Check.
  • 5.32 Units always perform Task Checks individually.
  • 5.33 When units in different Disruption states (6.1) stack they adopt the worst level of the new stack.
  • 5.34 Units forced to stack during retreats adopt the worst Disruption level of the new stack AND must Displace per 1.48.

Morale

Morale determines how well a unit withstands the shock and anxieties of combat. Units are rated from +3 (worse) to +8 (best) Morale value. This value is used to make all Morale and Task Checks.

  • 6.01 No more than one Leader can ever modify a Morale or Task Check with their Morale modifier. In a hex with multiple Leaders use only the most senior Leader in the hex (by rank, not Morale modifier), owning player's choice if tied.
  • 6.02 Leaders specified as Artillery or Cavalry Leaders may apply their Morale modifiers only to units of that branch.

6.1 Disruption

Disruption is used to measure a unit's ability to conduct itself in an cohesive fashion. Units gain Disruption by failing Morale Checks, moving through certain terrain types, etc. They lose Disruption by passing Rally Task Checks, (14.3).

  • 6.11 Units have four Disruption states. From best to worse, they are:

    • Normal: No adverse effects or modifiers.
    • Shaken: These units apply a -2 General modifier to all Morale and Task Checks. (Exception: Elite units).
    • Disorganized: These units apply a -3 General modifier to all Morale and Task Checks. (Exception: Elite units) and have their Movement Allowance halved (x 1/2).
    • Rout: These units are removed from the map and placed aside for possible return.

    Design Note: There are no markers for Normal or Rout Disruption states. Use CoA 'Desordre' counters to designate Shaken and 'Plus Grand Desordre' counters to designate Disorganized units. Routed units may return to the map due to a 'Rally To The Colors' Event result (see Sequence of Play 8.1A).

  • 6.12 A unit Routs only if it gains Disruption AND it is:

    • Disorganized and Out of Command Range, OR
    • Disorganized and Shattered, OR
    • Disorganized and of a Fatigued Command, OR
    • Disorganized and [Untrained].

    If it does not meet at least one of these criteria it remains Disorganized with no additional effect.

6.2 Morale Checks

A unit makes a Morale Check by adding applicable Morale General modifiers to its Morale value and adding the result to a 1d10 roll.

  • If the roll is a natural 10, the unit is successful in its Morale Check regardless of modifiers.

  • If the result is 10 or more it passes its Morale Check with no additional effect.

  • If the result is a 9 or less it fails its Morale Check and gains Disruption.

  • If the result is a natural 1 it fails its Morale Check and gains Disruption regardless of modifiers.

    Example: A Shaken unit with a +5 Morale is stacked with a 3/~/1 Leader when required to make a Morale Check. Its Morale value is 5 +1 (Leader's Morale modifier), -2 (Shaken) = +4. The owning player rolls a 5 on a d10. The result is 5 (+4) = 9 which fails. The unit gains Disruption and becomes Disorganized.

6.3 Task Checks

Units make Task Checks by adding applicable Morale General and Task modifiers (use reference letter on chart) to its Morale value and adding the results to a d10 roll.

  • If the roll is a natural 10, the unit is successful in its Task regardless of modifiers.
  • If the result is 10 or more the unit is successful in its Task.
  • If the result is a 9 or less the unit fails its Task with no further effect.
  • If the roll is a natural 1, the unit fails its Task regardless of modifiers.

6.31 List of Task Checks

  • A. Declaration: A unit that passes this Task Check is marked with a MELEE marker. (See 11.2).
  • B. Limber: An artillery unit that passes this Task Check Limbers. (See 4.5).
  • C. Press Cavalry: An infantry or artillery unit that passes this Task Check moves adjacent to enemy cavalry. (See 11.45).
  • D. Re-Align: A unit that passes this Check makes a facing change during the Reaction Phase. (See 12.1).
  • E. Fall Back: A unit that passes this Task Check retreats during the Reaction Phase. (See 12.2).
  • F. Form Up: A unit that passes this Task Check changes its present formation to any eligible formation given unit type and terrain during the Reaction Phase. This does not trigger Opportunity Fire. (See 12.3).
  • G. Reaction Charge: A cavalry unit that passes this Task Check may Melee an adjacent enemy unit during the Reaction Phase. (See 12.4).
  • H. Counter Charge: A cavalry unit that passes this Task Check may move up to 2 hexes and Melee enemy unit during the Reaction Phase. (See 12.5).
  • I. Pursuit: An infantry unit which is the victor of a Melee may Pursue (13.3) if it passes this Task Check.
  • J. Recall: A cavalry unit that passes this Task Check retreats, removes its CHARGE marker, (13.4) and loses Readiness (13.5).
  • K. Rally: A unit that passes this Task Check rallies Disruption. (See 14.3).

6.4 Panic Checks

Any unit stacked with or adjacent to a unit that is destroyed or Routed must immediately make a Panic Check. Panic Checks are resolved just like Morale Checks. Units that Rout due to failing their Panic Check may themselves trigger additional Panic Checks in adjacent friendly units.

Casualties

Casualties represent the wear and tear of battle on Commands and units generated by fire, melee or retreat results.

7.1 Unit Casualties

  • 7.11 When a unit suffers a casualty, cross out one increment box of the affected unit, starting with the leftmost box.
  • 7.12 When a unit no longer has increment boxes to the left of the Shattered $ mark the unit is considered Shattered.
  • 7.13 If a Shattered unit is part of a Brigade Command, cross out one Shattered box of the Brigade Command the unit belongs to, starting from the leftmost box. When a Brigade Command no longer has increment boxes to the left of its Shattered # mark the Command is considered Shattered.
  • 7.14 Units with their increment boxes in (parentheses), usually artillery or very small units, do not contribute to their Command's Shattered status.
  • 7.15 Units may not recover casualties within the scope of a one-day battle. See module special rules for recovering casualties in multiple day battles.

Design Note: Casualties do not necessarily represent kills but also the wounded, stragglers, and soldiers rendered otherwise hors de combat.

Example (illustrated on the printed page 7): Colborne's 1st Brigade with Engage Orders. The 3rd Foot has suffered 1 casualty and has lost its Inherent Commander due to a Special Loss result (7.3). The 31st Foot has suffered 2 casualties and is Shattered. The 48th Foot has suffered 1 casualty and lost its flag. The 66th Foot has 4 casualties and has been removed from the map. The Brigade is Shattered due to both 31st and 66th being Shattered and has marked off 6 Fatigue circles (see 14.1). Two more and it will suffer the consequences of Fatigue. Finally it also has a Maneuver Order in its Pending Order box which was issued by a Leader with a Command Rating of 2.

7.2 Leader Casualties

Leaders may become casualties if captured (7.24) or due to Special Loss Check results (7.3). Captured Leaders are placed on the enemy's roster. They may never be re-captured.

Replace Leader losses immediately as follows (owning player's choice in ties):

  • Replace Army Leaders with a royal personage (if present) or the senior subordinate Echelon Leader present on the map.

  • Replace Echelon Leaders with the senior subordinate Leader of that Echelon on the map. If none are available, then replace with a generic Replacement Leader.

  • Replace physical (not Inherent) Brigade Leaders, when present with a Replacement Leader. Replacement Leader Values are indicated in a module's Special Rules.

    Design Note: Physical Brigade Leaders will have to be replaced by generic counter of the player's manufacture.

  • Chiefs of Staff and AdCs, if available, may replace Division or Brigade Leader casualties, not Corps Wing or Army Echelon Leaders. If they do, they cease to be Chiefs of Staffs or AdCs and lose any special Command abilities they had in that capacity.

  • 7.21 Chiefs of Staff, AdCs and artillery Leaders may not be replaced.

  • 7.22 In all cases, and when possible, Leaders should be replaced by a Leader of the same military branch. Meaning that infantry Leaders replace infantry Echelon Leaders and cavalry Leaders replace cavalry Echelon Leaders when possible.

  • 7.23 Module special rules will detail Replacement Leader Values.

  • 7.24 Once replaced the new Leader assumes all capabilities of that Leader. They have the Command Range and Order Issue of the replaced Leader, they retain their Morale Bonus and any Grand Ability.

  • 7.25 Evade: If enemy units move into a hex solely occupied by an enemy Leader, that Leader may Evade. Roll 1d10:

7.3 Special Loss Check

When a natural 10 is rolled during fire, Assaults and Charges, a Special Loss Check (noted as SLC on charts) is triggered against the target hex. To resolve Special Loss Checks, triggering player rolls a d10 and refers to the Special Loss Table for result. If there is no eligible target in the hex then there is no effect.

  • 7.31 Special Loss Checks are always generated before any unit in the hex performs their Morale Checks, if any.
  • 7.32 A Special Loss only affects one unit or Leader per Special Loss Check. Choose at random if there is more than one eligible Leader or unit in the target hex.
  • 7.33 A Special Loss Check may yield the following possible results:
    • A. Flag Captured: The flag of an infantry/cavalry unit in the target stack is lost to the enemy. Circle the affected unit's Morale value and all units on its Roster. The unit's Morale value is reduced by one (-1) for the remainder of the game. Each regiment may only be affected by this Special Loss once per game. If target is an artillery unit or has suffered a Flag Captured loss already there is no effect.
    • B. Inherent Commander: The inherent commander of a unit (colonel, major, etc. depending on the unit) becomes a casualty. Cross out the unit's Morale value on its Roster. The unit's Morale Value is reduced by one (-1) for the remainder of the game. Each unit may only be affected by this Special Loss once per game. No effect if target has suffered an Inherent Commander loss already.
    • C. Brigade Commander: The Inherent Brigade commander of a formation becomes a casualty. Cross out the Brigade Leader's name and replace that Leader's Command Rating with the Replacement Leader values as indicated in each module's special rules (it is assumed that a colonel or next ranking officer takes over the Brigade). Each Brigade may only be affected by this Special Loss once per game so there is no effect if Brigade has suffered a Brigade Commander loss already.
    • D. Blaze: The terrain in the target hex catches fire. Mark the hex with a BLAZE marker (15.63).
    • E. Horse Shot: One Leader in the target stack has his horse shot from under him. Flip Leader counter to his verso side. Unhorsed Leader may not move, retreat, Advance Before/After Combat or Evade (7.25) while Unhorsed. During the next friendly Rally segment (14.3) the Leader has found a new mount and is no longer affected. Flip Leader counter back to his front side.

Turn Sequence

A game of Tactiques Napoléon consists of a series of Turns divided into Phases. Phases are broken down into Segments, and some Segments contain multiple Steps. Phases, Segments, and Steps must be completed in the order shown below.

8.1 Sequence of Play

Event Phase

  • A. Momentum Determination: Players each roll 1d10/2 (round up) and add the Command Rating of their highest ranking leader present on the map. The winner has Momentum for the upcoming Turn. Re-roll any ties.
  • B. Event: A player (it does not matter which) rolls 1d10. If the result is EVEN, an Event is triggered; if the result is ODD there is no effect. If an Event is triggered, roll another 1d10 and consult the module specific Events Table for a result. If an Event is unplayable due to a "once per game" or time constraint, re-roll until an effective Event is generated.
  • C. Weather: Some modules may have random weather to be generated by a die roll. A player, it does not matter which, rolls 1d10. Consult the module special rules for any weather effects.

Command Phase

Players perform Command Phase segments simultaneously.

  • D. Command Determination: Units and Leaders determined to be out of Command Range are marked OUT OF COMMAND (9.56).
  • E. Order Acceptance: Brigade Leaders attempt to accept Pending Orders. (9.2)
  • F. Order Issue: Army Leaders may issue ONE Order. (9.3)
  • G. Leader Initiative: Echelon Leaders may attempt Leader Initiative checks. If they pass they may issue ONE Order. (9.4)
  • H. Reinforcements: Players check the module's special rules for possible arrival of reinforcements. (9.7)
  • I. Activation Determination: Determine the Commands eligible to be activated in the current Turn (9.8) and collect the corresponding ACTIVATION markers. From those markers, the player with Momentum selects the first Command (friendly or enemy, Momentum player's choice) to activate for the Turn. Place the remaining Activation markers a into the Draw Cup.

Activation Phase

  • J. Activation Draw: The matching formation on the map chosen from 8.1I above performs its Activation. The owning player becomes the active player, the opposing player is the reactive player. Each Activation is resolved as follows:

    • Melee Declaration: Eligible active units may attempt Melee Declaration Task Checks. (11.2)
    • Offensive Fire: Eligible active units may make fire attacks. (11.3)
    • Movement: Eligible active units may move. (11.4) Eligible reactive units may Defensive/Opportunity Fire. (11.5)
    • Reaction: Eligible reactive units may attempt Reactions. (12.01)

    After completion of the Activation, place the Activation marker on the leader of the activated Command. Then the active player draws the next marker from the Draw Cup. Perform the Activation of the Command matching the drawn marker, following the same sequence used for the first activated Command. (11.2) Players continue drawing markers and activating Commands until the Draw Cup is empty.

Resolution Phase

  • K. Melee Resolution: The player with Momentum resolves his units' Assaults and Charges in any order he desires. Opposing player then resolves his units' Assaults and Charges in any order he desires.

Rally Phase

Players perform Rally Phase segments simultaneously.

  • L. Fatigue: Brigade Commands with Attack Orders gain Fatigue. Brigade Commands with Engage Orders gain Fatigue if any of its units were involved in a Melee Declaration or Resolution this Turn.
  • M. Cavalry Recovery: Cavalry units with Normal Disruption recover Readiness.
  • N. Rally: Unhorsed and Lightly Wounded Leaders attempt to return to play. Units attempt to Rally.
  • O. Commitment: Commands check for Commitment.

Turn End

  • P. Turn End Segment: All ACTIVATION markers are removed from the map. Players check to see if they have attained a Decisive Victory. If not the Turn marker is moved one space forward and play continues. Play continues until the last Turn of the game as specified in the module or until one player can claim an immediate Decisive Victory.

8.2 Victory Conditions

  • 8.21 Each module includes Victory Conditions applicable to that battle.
  • 8.22 Victory Points (VPs) may be awarded for inflicting losses, Shattering enemy Brigade Commands, controlling Terrain features and/or exiting units off the map from a specified hex. Each module will detail its Victory Conditions.
  • 8.23 At the end of each Turn both sides refer to the module's Victory Point Chart to determine the number of VPs gained. The player with the lower Victory Points subtracts his VPs from the other player's VP sum and refers to the Victory Conditions to determine a winner if any.
    • Example: The French player has Shattered 3 British Brigades each worth +2 VPs for a total of 6 VPs. The British player has Shattered 1 French Brigade (+2) and still holds an important village worth +2 VPs for a total of 4 VPs. The French player subtracts 4 (British VPs) from 6 (French VPs) to arrive at +2. The Victory Conditions are then referred to to see if this results in a victory.
  • 8.24 Victory Conditions are met if and when awarded VPs equal to or exceed the Victory Condition specified.
  • 8.25 Tactical Victory Conditions or Draws are determined after the last Turn of the game is played or upon mutual player agreement.
  • 8.26 Consider terrain to be controlled by the last side to solely occupy it. Only units may claim terrain, Leaders may not. Terrain VPs are halved and awarded to the last side to occupy should it become marked by a BLAZE (15.63) marker.

Command Phase

Leaders and units need Orders to determine the kinds of activities it may undertake and must be in Command Range of their superior Leader to function properly.

9.1 Command Range

Leaders and units must remain within the Command Range of their immediate superior Leader, based on their Rosters organizational hierarchy, in order to successfully function. Any Leader or unit that is determined to be out of Command Range of its superior Leader is marked with a OUT OF COMMAND marker (hereafter OOC), and may suffer negative modifiers and restrictions.

  • 9.11 Command Ranges are:

    • Brigade units must be adjacent to or 2 MPs from another unit of their Brigade to be in Command Range. Should units of the same Brigade be separated into two or more groups, the owning player decides which group stays in Command and which is marked OUT OF COMMAND.
    • Echelon Leaders have a Command Range of 6 to 12 MPs (as noted on the Rosters) to their subordinate Command Leaders and any units directly attached to the Echelon.
    • Army Leaders have a Command Range of 12 to 16 MPs (as noted on the Rosters) to subordinate Command Leaders and any units directly attached to the Army.
  • 9.12 Calculate Command Range distances in Leader Movement Points. When counting Movement Points, use only those hexes a Leader could move through.

  • 9.13 Command Range paths may not go through enemy occupied hexes or a hex adjacent to an enemy unit unless that hex is also occupied by a friendly unit.

  • 9.14 A Chief of Staff (hereafter CoS) adds +2 Movement Points to the Command Range of any ONE Leader the CoS is stacked with. Only one CoS may extend the range of a stacked Leader.

  • 9.15 A Multi-hex formation (4.6) of which only one hex of the unit is in Command Range is considered in Command.

    Design Note: A Command level may not be skipped. For example if a Brigade is out of Command Range of its Division but in Command Range of that Division's Corps it is still considered OUT OF COMMAND.

  • 9.16 Out of Command: Leaders and units that are Out of Command may move and function like any other Leader/unit with the following exceptions:

9.2 Order Acceptance

Players attempt to accept Orders for all Brigade Commands with a Pending Order (2.3) in their grey Pending Order box. To determine if a Pending Order is Accepted add the issuing Leader's Command Rating to the receiving Leader's Command Rating, add applicable Order Acceptance modifiers if any, and the result to a d10.

  • If the result is 10 or more the Brigade accepts the new Order. Order is erased from the Pending Order box and written in the Accepted Order box.

  • If the result is a 9 or less acceptance fails and there is no effect.

  • If the result is a natural 1 the Order is lost and is erased from the Pending Order box.

  • 9.21 Orders which fail to be Accepted remain in the Brigade Command's Pending Order box and are rolled for in each upcoming Turn until Accepted or lost.

    • Example: A Brigade Command Leader (Command Rating: 2) with a Reserve Order was issued an Attack Order by his Army Leader (Command Rating: 3). Modifiers are: 2 + 3 (Command Ratings) +2 (has Reserve Order) -1 (attempting to accept an Attack Order) = +6. Player rolls a 2 (+6) which fails. The Brigade continues to carry Reserve Orders and the Attack Order remains in the Pending Order box. The Leader may attempt to accept the Order again next Turn.

9.3 Order Issue

Each Army Leader may issue an Order to any ONE friendly Brigade or Echelon Leader within his Command Range (9.5) and that has an unbroken chain of command (9.11) during this segment.

  • If the Order is issued to an Echelon Leader, (Command Directive, see 10.05) that Leader immediately recovers from Command Paralysis (9.31).
  • If the Order is issued to a Brigade Command Leader, at least one unit of that Leader's Brigade must be within Command Range of the Army Leader. (Exception: If the Brigade Leader is represented by a non-italic Brigade Leader, Command Range must be traced to the physical Leader counter.)

Write the Order and the Army Leader's Command Rating in the Brigade's Pending Order box.

9.4 Leader Initiative

Echelon Leaders with their name in Bold may attempt to issue an Order to a subordinate Brigade Command by passing a Leader Initiative Check. Make a Leader Initiative attempt by adding the Leader's Command Rating to applicable Leader Initiative modifiers based on their Echelon and adding the results to a d10.

  • If the result is 10 or more the Leader may issue an Order to any ONE subordinate Brigade Command Leader of their Echelon within Command Range (9.5). Write the Order and the Echelon Leader's Command Rating in the Brigade Command's Pending Order box.

  • If the result is a 9 or less the Leader may not issue an Order this Turn.

  • If the result is a natural 1 the Leader fails to issue an Order and suffers from Command Paralysis (9.41). Flip the Leader counter to its verso side.

  • 9.41 Command Paralysis: Leaders who suffer from Command Paralysis may not attempt Leader Initiative, use their Morale modifier or Grand Ability, if any, while Paralyzed. A Leader may recover from Command Paralysis if the Army Leader issues Command Directive Order to him per 9.3.

9.5 Order Issue Restrictions

  • 9.51 Only one Order may be issued, or attempted to be issued to a Brigade Command Leader per Turn.

  • 9.52 Brigade Commands cannot be issued Reserve Orders (10.4) if they are Shattered (7.13) or have accrued any Fatigue (14.1).

    Design Note: It is possible for a Command with Reserve Orders to be Shattered due to combat suffered while under Reserve Orders, they just cannot be issued those Orders.

9.6 Independent Commands

Units stacked with Aide-de-Camps Leaders (hereafter AdCs), and/or located in Strongpoints (15.61) may be designated as an Independent Command. Independent Commands can be declared the moment they stack with an AdC or enter a Strongpoint hex.

  • 9.61 Units in Independent Commands may ignore Command Range restrictions so long as such units remain stacked with an AdC or remain in a Strongpoint hex.
  • 9.62 Independent Commands move, fire, Assault and Charge as if they carried an Attack Order even if the Brigade Command they belong to carries a different Order.
  • 9.63 If the AdC of an Independent Command leaves the unit for any reason (moves to a different hex, wounded, killed, etc.), or if a unit is forced to retreat from its Strongpoint, the unit immediately comes under the Orders of its parent Command adhering to all Command rules thereby.

9.7 Reinforcements

During the Reinforcement segment players check a module's Reinforcement schedule for any Groups which may arrive this Turn. Groups might be comprised of Commands, Leaders and/or units.

  • 9.71 A player makes a Reinforcement check by adding the Group modifier to the result of a d10 roll.
    • If the result is 10 or more the Reinforcement Group arrives. Leaders and units of that Group are placed off the map, adjacent to the designated entry hex. They then move on the map during their upcoming friendly Activation.
    • If the result is a 9 or less the Group does not arrive.
  • 9.72 If a Group does not arrive on its first attempt, a player rolls during each subsequent Reinforcement segment until the Group arrives.
  • 9.73 Subsequent reinforcements in the Group enter the number of Turns indicated after the first reinforcement with no further die roll required.
  • 9.74 Reinforcements entering the map are placed off the map next to their designated entry hex in the order in which they will enter the map.
  • 9.75 Reinforcements enter the map expending +1 MP for every unit which entered before it. Units unable to enter the map due to insufficient MPs may do so in upcoming Turns.
  • 9.76 If a Group cannot enter an entry hex (due to the presence of an enemy unit for example), that Reinforcement Group may enter +1 Turn later for every 5 hexes distant from the original entry hex.

9.8 Activation Determination

Each Command with the national flag symbol on the same line as its name on the Roster is eligible to be activated in the current Turn if:

  • It has at least one subordinate unit or leader on the map, or
  • It has at least one subordinate unit or leader in a Reinforcement Group eligible to enter the map in the current Turn. (9.7)

Players must provide an Activation marker (chit) for each Command that may be activated.

Design Note: Use La Bataille Maneuver Unit or similar markers for Activation markers.

  • 9.81 The player with Momentum selects one Activation marker, either friendly or enemy, from the set of markers corresponding to the Commands eligible to be activated in the current Turn. Place the remaining eligible Activation markers in an opaque Draw Cup. The chosen Command will have the first Activation in the current Turn.

Orders

Orders are the means by which players relay their plans and intentions to their Leaders and units. Each Brigade Command is capable of acting under its own distinct Order and all units of a Brigade Command may move, fire, Assault and Charge according to those Orders.

  • 10.01 A Brigade Command must have an Order in its Accepted Order box at all times.
  • 10.02 Prior to game start, players must give each Brigade Command which begin deployed on the map an Order. They can be any Order and they are noted in each Brigade Commands' Accepted Orders box.
  • 10.03 All Commands designated as Reinforcements may enter with any Order chosen by owning player.
  • 10.04 Army and Echelon Commands along with units directly attached to them are considered to have Attack Orders at all times.
  • 10.05 Command Directive: Instead of issuing an Attack, Engage, Maneuver or Reserve Order to a Brigade, an Army Leader can issue a Command Directive Order to a subordinate Leader. This Order causes the subordinate Leader to immediately recover from Command Paralysis (9.41).

10.1 Attack Order (A)

Units in Brigade Commands with Attack Orders and those attached directly to Echelon Commands:

  • May move using their entire Movement Allowance.
  • May move adjacent to enemy units. (Exception: If unit is Out of Command.)
  • May Offensive, Opportunity and Defensive Fire.
  • May Assault, Charge, Reaction and Counter Charge.

Leaders of Brigade Commands with Attack Orders must make a Commitment Check if their Command is Fatigued (14.1), Shattered (7.13) or at least one of their units is adjacent to an enemy unit.

Design Note: Use Commands with Attack Orders to launch a cavalry charge or vigorously assault an enemy position.

10.2 Engage Order (E)

Units in Brigade Commands with Engage Orders:

  • May move using 1/2 their Movement Allowance (round up).
  • May move adjacent to enemy units. (Exception: If unit is Out of Command.)
  • May Offensive, Opportunity and Defensive Fire.
  • May Assault, Charge, Reaction Charge and Counter Charge.

Leaders of Brigade Commands with Engage Orders must make a Commitment Check if their Command is Fatigued (14.1), Shattered (7.13) or at least one of their units is adjacent to an enemy unit.

Design Note: Use Commands with Engage to establish a static defense or to slowly push an enemy line.

10.3 Maneuver Order (M)

Units in Brigade Commands with Maneuver Orders:

  • May move using their entire Movement Allowance.
  • May not move adjacent to enemy units.
  • May Offensive, Opportunity and Defensive Fire.
  • May not Assault, Charge or Counter Charge but may Reaction Charge.

Leaders of Brigade Commands with Maneuver Orders must make a Commitment Check, applying a -3 modifier, if at least one of their units is adjacent to an enemy unit.

Design Note: Use Commands with Maneuver Orders to deploy for position or to actively harass the enemy.

10.4 Reserve Order (R)

Units in Brigade Commands with Reserve Orders:

  • Benefit from a +2 Order Acceptance modifier.
  • May move using their entire Movement Allowance.
  • May NOT move within 8 hexes to any enemy unit. If an enemy moves within that range the Reserve need not move away, it may stay put. If it does move however it must increase the range to the nearest enemy unit until at least 8 hexes away.
  • May Opportunity or Defensive Fire but may not Offensive Fire.
  • May not Assault or Charge.

Leaders of Brigade Commands with Reserve Orders automatically fail their Commitment Check (no roll required) if at least one of their units is adjacent to an enemy unit.

  • 10.41 Reserve Rating: All Brigade Commands have a Reserve Rating (hereafter RR), which is used to provide a beneficial modifier to Commitment Checks. The modifier is calculated by adding the RRs of all Brigade Commands in an army which presently have Reserve Orders, up to a maximum of +5. An Army can have more Brigades in reserve, they just can't influence the Reserve Rating modifier beyond +5.

    • Example: An army has 2 Brigades with RRs of 1 and 3 Brigades with an RRs of 1/2. All are carrying Reserve Orders. The RR modifier used in Commitment checks would be 3.5, rounding up to +4.
    • All units of a Command must be on the map to benefit from its RR.
  • 10.42 A Command may not be issued Reserve Orders if it has accrued any Fatigue (14.1) or if any of its units are Shattered (7.12).

    Design Note: Use Commands with Reserve Orders to bolster the spirit of friendly commands but careful not to let the enemy too close as they are quite vulnerable.

Activation Phase

During each Activation, the player who owns the activated Command is the active player, and the opposing player is the reactive player. All leaders and units subordinate to the activated Command are activated. Perform the Activation of the currently chosen Command by resolving the following steps in order:

  • Melee Declaration Step (11.2)
  • Offensive Fire Step (11.3)
  • Movement Step (11.4 and 11.5)
  • Reaction Step (12.)

Example: All Melee Declaration Task Checks are performed with desired eligible activated units, then all Fire attacks are resolved with eligible activated units, etc. Units may not move, then declare a Melee Declaration, nor may they move, fire, then move again in the same Activation.

11.1 Activation Draw

  • 11.11 After completion of an Activation, place the Activation marker on the leader of the activated Command. Then the active player draws the next marker from the Draw Cup. Perform the Activation of the Command matching the drawn marker, following the same sequence used for the first activated Command. Players continue drawing ACTIVATION markers and activating Commands until the Draw Cup is empty. Then proceed to the Melee Resolution Phase.

  • 11.12 Leaders and units may only be Activated once per Turn.

  • 11.13 Leaders and units of Commands the activated Command is subordinate to (i.e. higher Echelon Commands) may activate as part of a Command's Activation if:

    • They are within the Command Range of the leader of the activated Command, and,
    • They have not already been activated in the current Turn.

    Activating a leader or unit of a higher Command need not activate all leaders and units of that higher Command. Place markers as needed to remember which higher level leaders and units have been activated.

  • 11.14 Army Echelon Leaders and units may activate along with any subordinate formation regardless of range but again, only once per Turn.

    • Example: The French IIe Corps Activation marker is drawn at Mont St-Jean. All leaders and units subordinate to the IIe Corps are activated. The French player decides to also activate Ney with the IIe Corps. He is within 12 MPs of Reille, the IIe Corps Activated Echelon Leader, and has not yet been activated this Turn, so he may move with the IIe Corps. Later in the Turn the 1e Corps is activated, and the French player wishes to activate the leaders and units of the Army Command. All of them within Command Range of D'Erlon activate, except for Ney, since he was activated in a previous Activation.

11.2 Melee Declaration

Active infantry and cavalry units operating under Attack or Engage Orders may attempt to gain a Melee marker by passing a Melee Declaration Task Check. (6.31A) Successful infantry units gain an ASSAULT marker; successful cavalry units gain a CHARGE marker. Units failing Melee Declaration Task Checks may still fire and/or move in their Activation.

  • 11.21 Short Assault/Charge: A unit which passes its Melee Declaration Task Check when adjacent to an enemy unit will suffer a negative modifier in the ensuing Melee Phase: -1 if the declaring unit is infantry, -2 if cavalry. Mark the unit with the appropriate numbered counter.

    Design Note: Short Assault/Charge modifiers are in effect regardless of which stack the unit assaults or charges in the Melee Phase.

11.3 Offensive Fire

During the Fire segment eligible active units may Offensive Fire at an enemy occupied hex within range of its front facing and in LoS (15.1).

  • 11.31 Each unit (or hex of a Multi-hex unit) makes a separate fire attack and may not combine its fire with other units. Exceptions: Multi-hex units firing at the same target hex (4.68) and Grand Batteries (16.2).

  • 11.32 A unit makes a fire attack by multiplying its increments based on its formation (4.4) by its Fire value (4.1), adding any applicable Fire, Cover (15.04) or Hindrance (15.3) modifiers, and adding the result to a d10 roll. See 11.34 for results.

    • If the roll is a natural 10, the fire attack is successful and a Special Loss (7.3) check is generated against the hex.
    • If the result is 10 or more the fire attack is successful.
    • If the result is a 9 or less the fire attack misses with no effect.
    • If the roll is a natural 1, the fire attack missed and if the firing unit was an artillery unit it suffers the effects of Low Ammo (4.58).

    Example: A Shaken unit in Line fires at a unit in Column formation located in a Brush hex. Fire is determined to be 4 (increments in Line) x 1 (unit's Fire Multiplier) = +4 modified +1 (target is in Column), -1 (target is in Brush hex), -2 (firing unit is Shaken) = +2. Player rolls 9 modified +2 = 11. A hit!

  • 11.33 Units may only fire as many increments from a hex as available or eligible due to formation. Units may not split their fire between multiple hexes. Exception: Multi-hex units (4.46) may fire increments from each hex at two separate enemy units.

    • Example: Although an infantry unit may fire 4 increments from a hex when in Line formation, if it only has 3 increments remaining it may only fire those 3.
  • 11.34 There are five possible results depending on the type of unit firing and type of unit being targeted:

11.4 Movement

Every Leader and unit has a Movement Allowance (MA) printed on the lower right side of the counter which represents the number of Movement Points (MPs) available during an Activation. Activated Leaders and units can move from hex to hex by expending these MPs. The MP cost of entering a hex is detailed on the Terrain Chart, see 15.01.

  • 11.41 Leaders and units may move independently or as a stack. Keep a running total of MPs expended while moving. A Leader, unit or stack must complete its entire move before the next can begin theirs.

  • 11.42 A Leader, unit or stack must stop moving, unless using Cavalry Dash (11.48), when:

    • It runs out of MPs.
    • It has insufficient MPs to enter another hex.
    • It moves adjacent to an enemy unit.
  • 11.43 As units or stacks move, they may only enter front facing hexes, retaining their present facing, unless using Special Movement (11.48).

  • 11.44 Units may change formation only once during Movement expending MPs to do so. They may change facing as often as they wish. (Exception: Units marked with a MELEE marker may only change facing once AND only in their originating hex.)

  • 11.45 Infantry and artillery must pass a Press Cavalry Task Check (6.31C) to move adjacent to enemy cavalry.

  • 11.46 Units may never enter enemy occupied hexes, except enemy Leaders alone in a hex. (See Evade 7.25)

  • 11.47 Disengage: Units adjacent to an enemy unit may not voluntarily exit their hex unless:

    • They are Limbered artillery, OR

When exiting a hex, a unit or stack suffers the effects of Opportunity Fire after they enter the hex moved INTO, not the one they moved FROM.

Design Note: A unit or stack could conceivably move from a hex adjacent to an enemy unit, triggering Opportunity Fire to a hex adjacent to yet another enemy unit generating Defensive Fire. A Multi-hex formation which voluntarily collapses into a single hex formation would receive Opportunity Fire in the abandoned hex AND suffer Defensive Fire in the hex collapsed into.

  • 11.48 The following are special forms of movement:

    • Retrograde Movement: A unit in Line or Skirmish formation may move backwards to one of its rear hexes thereby retaining its present front facing at the additional cost of +1 MP.
    • About Face: A unit may change its facing orientation 180 degrees by About Facing at the cost of 2 MPs.
    • Movement By Flank: A unit in Line or Skirmish formation may move sideways to one of its flank hexes thereby retaining its present front facing at the additional cost of +1 MP.
    • Cavalry Dash: Cavalry and horse artillery may exit a hex adjacent to a enemy infantry/artillery (not cavalry) units at the additional cost of +2 MPs regardless of their Orders.
    • Artillery Prolong: An Unlimbered artillery unit may move 1 hex in any direction without Limbering by using Prolong, instead of using its MA. An artillery unit may not Prolong into a hex adjacent to an enemy unit or into Impassable Terrain.
    • Double Step: Units in Brigade Commands that carry Maneuver or Reserve Orders, that do not change formation or move adjacent to an enemy unit during the Movement segment may double (x2) its MA to expend as MPs by using Double Step. A Brigade Command using Double Step immediately crosses out 1 Fatigue circle if any or all of its units use Double Step.
    • Disorganized: Units with Disorganized Disruption halve their MA (round up). Halved MA is calculated at the time the Disruption takes effect.
      • Example: A Shaken infantry unit (MA: 7) Disengages from an enemy unit, expending 2 MPs to Retrograde move into a new hex. This triggers Opportunity Fire, the effects of which causes the moving unit to fail its Morale Check becoming Disorganized. The unit now has 3 MA remaining. 7 MA - 2 MPs for moving into hex = 5 MA halved (round up) to 3 MA for being Disorganized.

11.5 Defensive/Opportunity Fire

  • 11.51 Defensive Fire is triggered whenever active units enter in the adjacent front hex of a reactive unit. Follow the same procedure to fire as detailed in 11.3.
  • 11.52 Opportunity Fire is triggered whenever active units exit or change formation in the adjacent front hex of a reactive unit. Increments are halved (x1/2) for units firing Opportunity Fire, otherwise follow the same procedure to fire as detailed in 11.3.
  • 11.53 Retreats, facing change and Leader movement does not trigger Opportunity or Defensive Fire.
  • 11.54 Cohesion: Any losses incurred on a unit marked with a MELEE marker by Opportunity or Defensive Fire causes loss of Cohesion equal to that loss. Use a numbered chit to indicate Cohesion loss. Cohesion loss generates a negative modifier equal to the Cohesion loss in the ensuing Melee Resolution Phase.
    • Example: A cavalry unit with a MELEE marker moves adjacent to 2 enemy infantry units. The first Defensive fires and generates a hit. A '1' marker is placed on the cavalry unit. The 2nd infantry unit now fires and incurs yet another hit on the hapless cavalry. The Cohesion marker is replaced with a '2'. During the ensuing Melee Resolution Phase the cavalry will suffer a -2 Cohesion modifier during Melee.

Reaction

  • 12.01 Reactions can be attempted by any unit that is within 2 hexes of an enemy unit marked with an ASSAULT or CHARGE marker during the Reaction Phase. Any successful attempts DO NOT trigger Opportunity or Defensive Fire. Reaction Charges are an exception to the above and may only be attempted by eligible cavalry adjacent to an enemy unit even if that unit has no ASSAULT or CHARGE marker.

  • 12.02 Reaction units may change stacking order (5.12, no Task Check required) and perform one, and only one, of the following Reactions per Activation by passing a Task Check:

    • Re-Align, OR
    • Fall Back, OR
    • Form Up, OR
    • Reaction Charge, OR
    • Counter-Charge.

    If a unit attempts a Reaction, successful or not, it may not attempt another during the Phase.

  • 12.03 A unit marked with an ASSAULT or CHARGE marker loses that marker if its Reaction attempt is successful.

12.1 Re-Align

A unit that passes this Task Check makes one hexside/vertex facing change.

  • 12.11 Multi-hex units may not Re-Align.

12.2 Fall Back

A unit that passes this Task Check retreats.

  • 12.21 Only the following units may attempt to Fall Back:
    • Units in Skirmish formation.
    • Limbered Horse Artillery.
    • Cavalry not in Skirmish formation within 2 hexes of infantry marked with an ASSAULT marker.
    • Cavalry not in Skirmish formation within 2 hexes of enemy cavalry marked with a CHARGE marker AND which has a lower Movement Allowance than the cavalry making the Fall Back Task Check.
    • Any unit which has yet to Activate this Turn.
  • 12.22 Shelter: Infantry in Skirmish formation only (other units otherwise eligible to Fall back may NOT shelter) may Fall Back ONE hex instead of two IF the hex retreated to is a friendly unit in Column, Line or Square formations OR a Broken Terrain hex (not across a Broken hexside, see 15.5). Infantry that Shelter are placed at the bottom of a stack.
  • 12.23 Advance Before Combat: A unit or stack with an ASSAULT or CHARGE marker adjacent to a hex vacated by an enemy unit/stack MAY Advance Before Combat into the first hex just vacated hex at no MP cost, retaining its current facing and without losing its MELEE marker.
  • 12.24 Fall Back is a retreat and so does not trigger Defensive/Opportunity Fire.
  • 12.25 Advance Before Combat does trigger Defensive/Opportunity Fire from eligible enemy units.

12.3 Form Up

A unit that successfully passes this Task Check changes its formation, usually to Square, but any eligible formation is allowed.

  • 12.31 [Untrained] units may not Form Up.

12.4 Reaction Charge

A cavalry unit that successfully passes this Task Check charges any adjacent enemy unit or stack even if that unit has no ASSAULT or CHARGE marker. The cavalry unit may change facing but not formation to do so. Resolve Reaction Charges immediately, according to the Melee Resolution sequence (13.1).

  • 12.41 A cavalry unit which successfully Reaction Charges suffers a -2 Short Charge Melee modifier, may not Pursue (13.3) or Recall (13.4). Reaction charges also cause parent Brigade Commands to accrue +1 Fatigue (14.1) if any of its cavalry units Reaction Charges.
  • 12.42 Active units may not react to Reaction Charges.

12.5 Counter Charge

A cavalry unit that successfully passes this Task Check moves up to 2 hexes and charges an enemy unit or stack marked with an ASSAULT or CHARGE marker. The cavalry unit may NOT change facing or formation when performing a Counter Charge. Resolve Counter Charges immediately, according to the Melee Resolution sequence (13.1).

  • 12.51 Cavalry which Counter Charges may not enter any friendly/enemy unit occupied hex, Broken or Impassable Terrain when moving up to its target hex but MAY Pursue (13.3) and Recall (13.4).
  • 12.52 Infantry which is the target of a Counter-Charge MUST attempt to Form Up into square. (Exception: [Untrained] infantry, see 12.31). Any other active unit may not react to Counter Charges.
  • 12.53 Exhausted cavalry (13.5) may not Counter-Charge.

Resolution Phase

Units and stacks marked with MELEE markers must now choose an adjacent enemy occupied hex to Melee.

  • 13.01 Player with Momentum performs all his Melees first. Once all his Melees have been resolved the non-Momentum player resolves his Melees.
  • 13.02 A player resolves his Charges first. Once all his Charges have been resolved he resolves his Assaults.
  • 13.03 A hex (not unit/stack) may only be the target of Melee once per Turn.
  • 13.04 Units from multiple hexes may not Melee the same hex unless a Multi-Hex formation (4.6), part of a Grand Assault (16.1) or part of a Grand Charge (16.3).
  • 13.05 At the end of the Resolution Phase remove all MELEE and COHESION markers.

13.1 Melee Resolution

Each Melee is resolved according to the following sequence:

  • A. Determine Melee Type: The attacker and the defender each determine the Melee types for their unit/stack. There are four unit types for Melee: infantry, cavalry, artillery or square. The top unit in a stack determines the unit type used for that hex.
  • B. Determine Melee Strength: A unit/stack's Melee strength is calculated by multiplying the number of eligible increments by its Melee value modified by Melee Value modifiers.
    • Example: Unit A has 7 increments assaulting a hex. It calculates 7 (increments) x 2 (its Melee value) to arrive at a Melee strength of 14. The same unit assaulting a Fortification hex could only use 6 increments since that is the maximum allowed to stack in a fortification hex (5.25). 6 increments x 2 Melee value = 12 Melee strength.
  • C. Determine Melee Odds: The attacker compares its Melee strength to the Melee strength of the defender. The comparison is expressed as a ratio (attacker's strength divided by the defender's strength), and rounded in favor of the defender. The odds ratio is then shown as both attacker and defender modifiers on the Melee Odds Table.
  • D. Determine Melee Modifiers: Attacker and defender each determine a Final Melee modifier by adding any Odds, General, Morale and Melee modifiers to their Morale value.
  • E. Determine Victor: Each player rolls a d10/2 (round up) and adds their Final Melee modifier to that roll. The higher roll determines the winner.
  • F. Determine Margin: Subtract the defender's result from the attacker's result to determine the margin of victory. A positive result yields an Attacker victory. A negative result yields a Defender victory. See 13.22 for a tie result.
  • G. Apply Results: Cross-index margin of victory with the Melee Types of attacker and defender and apply results.

13.2 Melee Results

There are two Melee tables. Table use is determined by which side is the victor of the Melee, the attacker or the defender. After determining victor, cross reference Melee types with the margin of victory.

  • 13.21 Possible results are:

    • #: The number equals increment loss a unit/stack suffers. See 5.22 for loss distribution if in a stack.
    • MC: Unit, or top unit if in a stack, must make a Morale Check.
    • Dr: Unit/stack gains Disruption.
    • 2Dr: Unit/stack gains Disruption twice.
      • Example: A unit at Normal Disruption would become Disorganized. A Shaken or Disorganized unit would Rout if otherwise eligible.
    • Rt: Unit/stack retreats and loses its Melee marker if any.
    • Pr#: Unit/stack may Pursue up to # of MPs. (13.3).

    An attacker loses its MELEE marker after a melee unless it generates a Pursuit result.

  • 13.22 Special results are:

    • If a natural 10 is rolled the opposing side suffers a Special Loss Check.
    • If the rolls result in a tie there is no victor. Both stacks lose 1 increment, gain Disruption and the Melee ends.
  • 13.23 Advance After Combat: An attacker unit/stack which is the victor of a Melee MUST Advance into a defender vacated hex, at no MP cost, retaining its current facing. This occurs before applying any Pursuit (13.3) results. A hex may be vacated by defender being eliminated, Routing or retreating. Advance After Combat does not trigger Defensive or Opportunity Fire.

13.3 Pursuit

An attacker which generates a Pursuit result retains its MELEE marker and:

  • Must Pursue if it is a cavalry unit, unless it passes a Recall Task Check (6.31J).

  • May Pursue if it is an infantry and it passes a Pursuit Task Check (6.31H). [Source note: the printed cross-reference reads 6.31H; in the 6.31 list the Pursuit check is item I and H is Counter Charge. The reference is kept as printed.] Infantry that fail to Pursue lose their MELEE marker.

  • 13.31 An attacker that Pursues retains its CHARGE marker, and may Melee additional enemy units during the Resolution Phase. It must do so immediately before any other Melee is resolved.

  • 13.32 Pursuit Task Checks are done by each individual infantry unit which participated in the Melee and generated the Pursuit result.

  • 13.33 A Pursuing cavalry unit may Melee an adjacent enemy unit or move up to the number of MPs indicated on the Melee Result Table. It may change facing but not formation to do so. Pursuit movement does not trigger Defensive or Opportunity Fire.

  • 13.34 A unit may only Pursue once per Turn and immediately after the Melee result which generated the Pursuit. If additional Pursuit results are generated during a subsequent Pursuit Melee they are ignored.

13.4 Recall

An active cavalry unit may make a Recall Cavalry Task Check (6.31H) to retreat instead of completing a Charge or immediately after a successful Charge. Remove a CHARGE marker from a cavalry unit which successfully Recalls.

[Source note: the printed cross-reference reads 6.31H; in the 6.31 list the Recall check is item J. The reference is kept as printed.]

  • 13.41 A cavalry unit may make a Recall Check:
    • Prior to calculating Melee Resolution Odds. (13.1)
    • Immediately after any Advance Before Combat. (12.23)
    • Immediately after any Advance After Combat. (13.21)
  • 13.42 A unit marked with a CHARGE marker that fails to Recall must use its Pursuit MPs to move adjacent to the nearest enemy unit (in hexes not MPs) and Melee it if possible.

13.5 Cavalry Readiness

Cavalry lose Readiness after every Melee in which it participated either as an attacker or defender and/or after any successful Recall Task Check. There are 3 levels of Cavalry Readiness:

  • Fresh cavalry which have no marker.
  • Tired cavalry are marked by a TILDE "~" marker, suffer a -1 modifier for Recall and Fall Back Task Checks and have their Melee Value halved (x1/2).
  • Exhausted cavalry are marked by a DOUBLE TILDE "≈" marker, suffer a -3 modifier for Recall and Fall Back Task Checks, have one third (x 1/3) their Melee Value and have MA halved (x 1/2).

Tired or Exhausted cavalry units regain Readiness during the cavalry Recovery Segment (14.2).

  • Example: A cavalry unit charges and Melees the enemy. It is marked Tired. If say it receives a Pursuit result it may do so while Tired. If it Melees yet another enemy unit it then becomes Exhausted.

Rally Phase

Players perform the segments of the Rally Phase simultaneously.

14.1 Fatigue

During the Fatigue segment all Brigade Commands with Attack Orders (10.1) gain +1 Fatigue. All Brigades with Engage Orders which had at least one unit involved in a Melee Declaration or Resolution gain +1 Fatigue. Brigades with Maneuver or Reserve Orders do not accrue fatigue (Exception: Double Step, 11.48 and Reaction Charge 12.4). Cross out 1 Fatigue circle on the Brigade Command's Roster. Once all Fatigue circles are crossed out, the Brigade suffers negative Morale and Command modifiers.

  • Example: A Command has Engage Orders and one of its units makes a successful Melee Declaration attempt. The Command will suffer +1 Fatigue even if the Melee is never resolved. Likewise, say a Command has Maneuver Orders and one of its cavalry units successful Reaction Charges. The Command would suffer Fatigue for being involved in a Melee Resolution.

14.2 Cavalry Recovery

During the Cavalry Recovery segment, cavalry units that are not in Broken Terrain, Shaken, Disorganized, or adjacent to an enemy unit gain Readiness (13.5).

14.3 Rally

During the Rally Segment:

  • Flip all Unhorsed Leaders (7.33D) to their front side. [Source note: the printed cross-reference reads 7.33D; Horse Shot is item E in 7.33. Kept as printed.]

  • Roll a 1d10 for each Lightly Wounded Leader (7.33E). If the result is 7 or more the Leader returns to play stacked with any friendly unit of his Command. [Source note: printed as 7.33E; Lightly Wounded is item F in 7.33. Kept as printed.]

  • Roll a Rally Task Check (6.31L) for each unit that is presently Shaken or Disorganized. [Source note: printed as 6.31L; Rally is item K in 6.31. Kept as printed.] If successful it rallies its Disruption from Disorganized to Shaken OR from Shaken to Normal.

  • 14.31 Units may not attempt to Rally in certain terrain. Refer to module Terrain Effects Chart notes.

    Example: Two Shaken units of which only one successfully Rallies would revert to both units Shaken due to the effects of Stacking and Morale (5.33).

14.4 Commitment

During the Commitment Segment:

  • All Brigade Command Leaders with Attack and Engage Orders AND which are Fatigued, Shattered or have at least one unit adjacent to an enemy unit, must make a Commitment check.

  • All Brigade Command Leaders with Maneuver Orders which have at least one unit adjacent to an enemy unit, must make a Commitment check, applying a -3 modifier.

  • All Brigade Command Leaders with Reserve Orders which have at least one unit adjacent to an enemy unit automatically fail their Commitment check with no roll required.

  • 14.41 A Leader makes a Commitment check by adding applicable Commitment modifiers to his Command Rating and adding the results to a d10 roll.

    • If the result is 10 or more the check passes with no effect.
    • If the result is a 9 or less the Commitment fails.
    • A natural 1 roll triggers a Full Retreat (14.45) and ALL units must retreat not just those that are adjacent.
  • 14.42 All Brigade Command Leaders belonging to the player without Momentum, which fail their Commitment Checks must immediately retreat all units of their Commands which are adjacent to enemy units. Other units of the Command may retreat at the owning player's discretion, even if not adjacent to an enemy unit. The player with Momentum then retreats his units of Commands which failed their Commitment Checks which are still adjacent to an enemy unit.

    Design Note: The player without Momentum may have retreated as such that the failed Commitment command is no longer adjacent. The failed Commitment still takes effect but only units which remain adjacent need retreat. Exception Full Retreat (see 14.45).

    In addition Leaders of Brigade Commands with Attack or Engage Orders which failed their Commitment Checks have that Order immediately changed to a Maneuver Order.

Terrain

Every hex on the map has a terrain type as listed in each module's Terrain Chart. A hex's terrain type is defined by the terrain which is predominant within it, be it Woods, Town or Marsh for example. Some hexsides can also contain terrain which can affect fire or movement such as Stream, Wall or Slopes. Road and Trails can also exist in a hex usually modifying a unit's movement.

  • 15.01 Each type of unit (infantry, cavalry, artillery and Leaders) have a Movement column on the Terrain Chart which lists the amount of MPs a unit must expend to enter that hex or to cross that hexside.
  • 15.02 Units cannot enter or cross Impassable terrain. Units forced to do so due to retreat are eliminated.
  • 15.03 A unit in March formation can use Roads, Trails, Bridges and Fords only when following its path. The unit pays that MP cost and ignores other terrain in the hex or hexside crossed.
  • 15.04 Each terrain type has a Cover modifier which is applied to any fire attack made against units in that hex or across that hexside. Cover is never cumulative and a player must choose only one instance of Cover to apply if more than one present.
    • Example: A unit is fired upon while in an Orchards hex (-1 cover) which is also bounded by a Wall hexside (-2 cover). The unit could only claim the Orchards or Wall (not both) as cover. The unit would probably claim the Wall as it provides the greater cover from fire.

15.1 Line of Sight

Line of Sight (hereafter LoS) determines whether units and Leaders can see one another or not. Determine a LoS path from the center of one hex to the center of another. Hex and hexside features along this path may affect LoS if this path touches or crosses the physical depiction of Blocking (15.2), Hindrance (15.3) or Sloping (15.4) terrain.

  • 15.11 LoS always exists between adjacent units and is reciprocal; if hex A can see hex B, then B can also see hex A.
  • 15.12 Any Blocking, Hindrance or Sloping terrain which is in or part of the sighting and target hex does not affect LoS.
  • 15.13 Leaders and units, friendly or enemy, do not block LoS but may block fire per 11.35.
  • 15.14 Player's choice of which hex is crossed if LoS which runs exactly along a hexspine.

15.2 Blocking Terrain

Blocking terrain represents terrain which are obstacles to LoS.

  • 15.21 A LoS path may be traced into a Blocking hex but never beyond it unless traced from a higher elevation.
  • 15.22 Ricochet Fire is blocked by Blocking Terrain beyond the original hex.

15.3 Hindrance Terrain

Hindrance terrain represents sparse topography such as orchards and brush which hinders but does not block fire traced through it.

  • 15.31 All fire passing through Hindrance terrain is modified by the 'LoS' modifier noted on the Terrain Chart.
  • 15.32 All Hindrance modifiers are cumulative.
    • Example: An artillery unit fires at an enemy unit and the LoS is traced through both an Orchard hex (-2 LoS modifier) and a Brush hex (-1 LoS modifier). The fire would be modified by -3 for the Hindrances.

15.4 Sloping Terrain

Sloping terrain represents significant undulations in the land.

  • 15.41 If LoS crosses a non-adjacent Slope hexside it may be Blocked if the sighting and target hex are on different elevations.
  • 15.42 Blocking, Hindrance and Sloping terrain is ignored if the hex or hexside in question is closer to the higher elevation hex than the lower one, or if it is at a lower elevation than both sighting and target hexes.
  • 15.43 Ricochet Fire may not cross Slope hexsides.

15.5 Broken Terrain

Broken terrain represents topography which may impede the movement and handling of units, especially cavalry.

  • 15.51 Some units, depending on type and formation, may gain Disruption when they enter, cross or advance into or through certain Broken terrain types.
  • 15.52 Units may not Rally in certain Broken Terrain. Refer to individual Module Terrain Effects Chart for details.
  • 15.53 Ricochet Fire is blocked by Broken Terrain beyond the original hex.
  • 15.54 Cavalry marked with a CHARGE marker gain Disruption for every Broken hex or hexside they enter/cross.

15.6 Special Terrain Types

  • 15.61 Strongpoint: Units in Strongpoint hexes are Independent Commands (9.6) and may ignore retreats resulting from failed Commitment Checks (14.4) at the owning player's discretion.
  • 15.62 Fortification: Artillery may not fire at Fortification hexes using the Close Range (x2) modifier. Treat all such shots as Effective Range shots. Units Assaulting or Charging into or across a Fortification hexside suffer a -2 Melee modifier. (Exception: When a Sapper unit is Assaulting or is the top unit of an Assaulting stack.) Defending units in a Fortification hex or across Fortification hexsides need not retreat, owning player's choice, if they suffer a Melee result (13.2) on the +2 to +4 column of the Attacker Victor Melee Results Table.
  • 15.63 Blaze: Any eligible non-water terrain hex may become a Blaze hex due to a Special Loss result (7.3C). [Source note: the printed cross-reference reads 7.3C; Blaze is item D in 7.33. Kept as printed.] Units and Leaders in a Blaze hex must immediately displace to an adjacent hex (1.48). Leaders and units may not enter Blaze hexes. Hexes marked with a BLAZE marker block LoS regardless of elevation.
  • 15.64 Sunken Road: Units located in a Sunken Road hex and in March formation are considered at a lower elevation benefiting from a -1 Cover modifier for all fire crossing a Sunken Road hexside. Units entering or exiting a Sunken Road hex must pay +2 MPs, unless moving parallel with the road.
  • 15.65 Steep Slopes: Adjacent units may not fire at each other if LoS crosses a Steep Slope hexside.

15.7 Night/Dusk/Dawn

Some modules may have some Turns occurring during dusk, night or dawn, limiting unit and command effectiveness. During those Turns apply the following:

  • Dawn/Dusk:
    • A -1 modifier to all Command, Fire, Morale, Melee and Task Checks.
    • LoS is restricted to 6 hexes.
    • Movement is restricted to a maximum of 6 hexes. (MP costs still apply.)
  • Night:
    • A -3 modifier to all Command, Fire, Morale, Melee and Task Checks.
    • LoS is restricted to adjacent hexes only.
    • Assaults and Charges may only be declared against adjacent targets.
    • Movement Allowances are halved.

Grand Abilities

Some Leaders have Grand abilities, others may gain Grand abilities due to Events.

  • 16.01 All units stacked with AND adjacent to the Leader may benefit from that Leader's Grand ability.

16.1 Grand Assaults

Leaders with the Grand Assault ability enable infantry units to:

  • Benefit from the Leader's Morale modifier when attempting Melee Declarations.
  • Benefit from the Leader's Morale modifier when rolling for Melee Resolution.
  • Combine their Assault against a single hex.

16.2 Grand Batteries

Leaders with the Grand Battery ability enable artillery units to:

  • Combine their fire increments when firing at a target hex.

  • Cause a -2 modifier to be imposed on enemy units when Morale Checks are generated.

  • 16.21 If two or more artillery units combine their fire in a Grand Battery and obtain a Low Ammo result, only one unit involved in the fire (chosen at random) suffers the effects of Low Ammo.

  • 16.22 A single artillery unit can still form a Grand Battery.

16.3 Grand Charges

Leaders with the Grand Charge ability enable cavalry units to:

  • Benefit from the Leader's Morale modifier when attempting Melee Declarations.
  • Benefit from the Leader's Morale modifier when rolling for Melee Resolution.
  • Combine their Charges against a single hex.

Fog of War

To increase Fog of War, keep the following secret:

  • Casualties and Shattered conditions.

  • Orders issued and carried by Brigade Commands.

  • 17.01 Players can only examine enemy stacks that are within LoS of their highest ranking Leader on the map.

17.1 Masking

Some module special rules may permit some units to begin the game Masked from enemy view. Use any appropriate blank counter to denote Masked units.

  • 17.11 Any number of MASKED counters may stack together even if no units are present.
    • Example: One Masked counter may be placed on top of a stack or placed on top of any number of other Masked counters to create a Dummy stack.
  • 17.12 A Masked unit or stack has the target modifier of a Skirmish formation, even if the Masked unit cannot enter such a formation or if a Dummy stack.
  • 17.13 Units immediately lose their MASKED counter when they fire.
  • 17.14 Stacks lose their MASKED counter the instant an enemy unit or Leader moves adjacent to it or when successfully hit during a fire attack.
  • 17.15 Masked units may move using the Movement Allowance of units under Masked counters. Dummy stacks use any MA deemed appropriate by the owning player to deceive the enemy.

Miscellaneous

18.1 Split Units

The rosters sometimes represent units (mostly cavalry) that have been split into multiple separate units (labelled a, b, etc.) to make them more manageable, to indicate more tactical flexibility and to not artificially penalize them with harmful stacking modifiers.

For Face to Face play however, such split units are assumed to be stacked at all times. When such a unit suffers a casualty loss, alternate the crossing out of increment boxes between units on the Rosters.

  • Example: Cross out the first increment box of cavalry unit -a first, a second loss would cross out the first increment box of cavalry unit -b. A third casualty loss would be crossed out on unit -a, so on and so forth.

When unit -a reaches its Shattered mark, cross out one box of the Brigade's Shattered boxes. Do likewise when unit -b reaches its Shattered mark. The unit itself however is considered Shattered only when the Shattered mark of the second -b unit is reached.

Quick Reference Charts

The following is transcribed from the quick-reference card printed at the end of the TN rules. Its Sequence of Play panel repeats Section 8 and is not repeated here.

Command Modifiers

General Command Modifiers

  • +x: Leader Command Rating
  • -2: Leader is Out of Command
  • -1: Dawn/Dusk Turn
  • -3: Night Turn

Leader Initiative Modifiers

  • +1: Division/Column Echelon Leader
  • +2: Corps/Wing Echelon Leader

Acceptance Modifiers

  • +x: Issuing Leader's Command Rating
  • +2: Command presently has Reserve Order
  • -1: Attempting to accept an Attack Order
  • -2: Command is Shattered (Attack Order only)
  • -2: Command is Fatigued (Attack/Engage Order only)

Commitment Modifiers

  • +x: Current Reserve Rating (Maximum: +5)
  • -2: Command is Shattered
  • -2: Command is Fatigued
  • -3: Command presently has Maneuver Orders

Check Results

RollLeader Initiative CheckOrder Acceptance CheckCommitment Check
Natural 10Pass: Issues OrderPass: Accepts OrderPass: No Effect
10+Pass: Issues OrderPass: Accepts OrderPass: No Effect
9-Fail: No effectFail: No effectFail: Retreat units
Natural 1Fail: Command ParalysisFail: Lost OrderFail: Full Retreat

Order Effects Chart

TypeAcceptMoveProximity enemy unitFireAssaultChargeFatigueCommit
Attack-1 modFullAdjacentYesYesYes+1 (note 1)Yes
Engage+0 modHalfAdjacentYesYesYes0 (note 1)Yes
Maneuver+0 modFullNot Adjacent

Order Effects Notes

  1. +1 Fatigue if any unit is involved in a Melee Declaration or Resolution
  2. +1 Fatigue if any unit performs a Reaction Charge or Double Step
  3. +1 Fatigue if any unit performs Double Step

Leaders

  • Unhorsed: No Move, Retreat or Evade.
  • Command Paralysis: No Leader Initiative, Morale modifier or Grand Ability.

Formation Change

  • 1 MP: Infantry [Untrained: 2 MPs]
  • 2 MPs: Cavalry [Untrained: 4 MPs]
  • 3 MPs: Artillery

Special Movement

  • x2 MP: Moving in Line
  • x3 MP: Moving in Square
  • +1 MP: Retrograde Movement
  • 2 MPs: About Face
  • +1 MP: Movement By Flank
  • All MPs: Artillery Prolong
  • +2 MP: Cavalry Dash
  • x2 MA: Double Step (+1 Fatigue)
  • x1/2: Disorganized unit
  • x1/2: Exhausted cavalry unit

LoS Ranges

  • 6 hexes: Dawn/Dusk Turn
  • 1 hex: Night Turn

Retreat Distances

  • 1 hex: Skirmish Infantry Fall Back
  • 2 hexes: Infantry and Foot Artillery
  • 4 hexes: Cavalry and Horse Artillery

Skirmish

  • (x) 2 hex Range
  • 3 hex Range
  • x # Double Fire Multiplier when in Skirmish formation

Fire Notes

  • loss = # Increment loss

  • MC = Morale Check
  • Dr = Units gain Disruption
  • SLC = Special Loss Check. Occurs before Morale Check
  • ¹ = Firing Artillery unit loses 1 ammo circle
  • ² = Target Artillery unit loses 1 ammo circle

Fire Modifiers

Increment Modifiers

  • x2: Firing unit is Detached Company in Skirmish formation
  • x2: Target is adjacent to firing artillery (Close Range)
  • x1/2: Target is in Skirmish formation or Unlimbered Artillery
  • x1/2: Firing Opportunity Fire

Target Modifiers

  • +1: Target is massed (+1 for every 9 increment equivalent in hex)
  • +1: Target is in Column formation or Limbered artillery
  • +2: Target is in March or Square formation
  • -x: Cover/Hindrance (see Terrain Chart)

Fire Modifiers

  • -2: Firing unit is Shaken (Elite units ignore)
  • -3: Firing unit is Disorganized (Elite units ignore)
  • -2: Firing unit is part of a Fatigued Command
  • -1: Firing during a Dawn/Dusk Turn
  • -3: Firing during a Night Turn

Fire Results

RollMusketry FireSkirmish FireArtillery FireCounter-Battery Fire
Natural 10Hit: 1 loss + SLC + MCHit: SLC + DrHit: 1 loss + SLC + MCHit: SLC + MC + Limber ²
20+——Hit: 2 losses + MC—
10+Hit: 1 loss + MCHit: MCHit: 1 loss + MCHit: MC (Fail = also Limber)
9-Miss: No effectMiss: No effectMiss: No effectMiss: No effect
Natural 1Miss: No effectMiss: No effect

Ricochet Fire (Range x 1.5): 10+ Hit: SLC + MC. 9- Miss: No effect.

Artillery Ranges

  • Close (1 hex): Fire x2
  • Effective (2-5 hexes): Fire x1
  • Long (6 to #): Fire x1/2
  • Ricochet (x1 1/2): Ricochet

Morale Modifiers

General Modifiers

  • +x: Morale modifier of highest ranking Leader in stack
  • -1: Unit lost its Flag/Inherent Leader (cumulative)
  • -2: Unit is Shaken (Elite units ignore)
  • -3: Unit is Disorganized (Elite units ignore)
  • -2: Unit is Shattered
  • -2: Unit is part of a Fatigued Command
  • -2: Unit is Out of Command
  • -1: Dawn/Dusk Turn
  • -3: Night Turn
  • -1: Depot hex threatened

Target Modifiers

  • +2: Unit is target of Fire/Assault/Charge in a Strongpoint hex
  • -3: Unit is target of Fire/Assault/Charge from Flank/Rear hex
  • -2: Unit is target of a Grand Battery

Declaration Task Modifiers

  • -2: Unit in Square or Skirmish formation
  • -2: Unit has enemy in Line or Column formation in Flank/Rear hex

Reaction Task Modifiers

  • +1: Skirmish Infantry attempting to Shelter (Fall Back)
  • +2: Cavalry/Limbered Horse Artillery Falling Back from an Assault
  • -2: Foot artillery attempting to Form Up
  • -2: Infantry and cavalry in Skirmish formation attempting to Form Up
  • -1: Tired cavalry attempting any Reaction Task Check
  • -3: Exhausted cavalry attempting any Reaction Task Check

Morale Check and Task Check Results

RollMorale CheckTask Check
Natural 10Pass: No effectPass: Success
10+Pass: No effectPass: Success
9-Fail: Gain DisruptionFail: No effect
Natural 1Fail: Gain DisruptionFail: No effect

Melee Value Modifiers

  • x2: Square vs Cavalry
  • x2: Heavy Cav vs Light Cav
  • x1/2: Square vs Infantry
  • x1/2: Cavalry vs Square
  • x1/2: Cavalry vs Broken Terrain
  • x1/2: Unit is in Skirmish formation
  • x1/4: Unit is in March formation
  • x1/2: Unit is Limbered artillery
  • x1/4: Cavalry in General formation
  • x1/2: Cavalry unit is Tired
  • x1/3: Cavalry unit is Exhausted

Melee Odds Modifiers

AttackerOddsDefender
-31 to 4+3
-21 to 3+2
-11 to 2+1
+11 to 10
+22 to 1-1
+33 to 1-2
+44 to 1-3

Melee Modifiers

  • +1: Multi-hex unit attacking a single hex unit
  • -1: Attacking UP slope
  • -2: Attacking across Broken Terrain
  • -2: Attacking Fortification (Sappers ignore)
  • -1: Short ASSAULT
  • -2: Short CHARGE or Reaction Charge
  • +1: Defending in Broken Terrain
  • -x: Cohesion modifier
  • +x: Attacking cavalry Lancer bonus
  • -3: Inf/Art defending from Charge and not in Square formation or Broken Terrain

Melee Results Table

Attacker Victor (the table used when the attacker wins the Melee). Each cell is Attacker / Defender.

Melee Type+1 Attacker+1 Defender+2 to 4* Attacker+2 to 4* Defender+5 to 7 Attacker+5 to 7 Defender+8 or more Attacker+8 or more Defender
Infantry vs Infantry0/MC/~0/Dr/~0/MC/~0/Dr/Rt0/~/Pr01/Dr/Rt0/~/Pr22/2Dr/Rt
Infantry vs Artillery0/MC/~0/Dr/~0/MC/~0/Dr/Rt0//1/Dr/Rt0/~/Pr22/2Dr/Rt
Infantry vs Cavalry0/MC/~

* Fortifications: defender retreat optional if in or across Fortification hex/hexside.

Defender Victor (the table used when the defender wins the Melee). Each cell is Attacker / Defender.

Melee Type-1 Attacker-1 Defender-2 to 4 Attacker-2 to 4 Defender-5 to 7 Attacker-5 to 7 Defender-8 or more Attacker-8 or more Defender
Infantry vs Infantry0/MC/~0/MC/~0/Dr/Rt0/MC/~1/Dr/Rt0/MC/~2/2Dr/Rt0//
Cavalry vs Infantry0/MC/~0/Dr/~0/Dr/Rt0/MC/~1/Dr/Rt0/MC/~2/2Dr/Rt0//
Cavalry vs Cavalry0/MC/Rt

Melee Notes

  • ~ = No Effect
  • = Increment loss

  • Dr = Gain Disruption
  • 2 Dr = Gain 2 Disruption
  • MC = Morale Check
  • Rt = Retreat
  • Pr# = Pursuit #MPs
  • ¹ = A natural 10 generates a SLC for opposing stack

Melee Calculation

  • Attacker Increments x Melee Value ÷ Defender Increments x Melee Value = Melee Odds
  • Morale Value + General and Target modifiers + Odds modifier + Melee modifiers + 1d10/2 (round up) = Total Melee Modifier
  • Attacker Total - Defender Total = Margin of Victory
  • A Tie = 1 loss each stack + Dr

Special Loss Table

RollInfantry FireArtillery FireAssaults/Charges
1No effectB*FC
2No effectB*C
3ICB*IC
4BCICBC
5HSBCHS
6HSHSLW
7LW

Special Loss Notes

  • FC: Flag captured. (-1 Morale)
  • C: Leader is captured.
  • IC: Intrinsic unit commander becomes a casualty. (-1 Morale)
  • BC: Brigade Commander becomes a casualty.
  • B: BLAZE marker is placed if target is eligible (*Exception: Ricochet)
  • HS: Leader has his Horse Shot.
  • LW: Leader Lightly Wounded.
  • GW: Leader Grievously Wounded.
  • K: Leader Killed.
Morale Check and Task Check Results
  • Melee Value Modifiers
  • Melee Odds Modifiers
  • Melee Modifiers
  • Melee Results Table
  • Special Loss Table
  • 1.44 Units can freely readjust their facing and/or stacking order after retreating at no Movement Point cost.
  • 1.45 A Leader in a stack that retreats can move with the stack at the owning player's discretion.
  • 1.46 Unlimbered artillery that retreats must Limber to do so, no Limber Task Check roll (6.31B) required.
  • 1.47 Depots: One or more map edge hexes may be designated as a Depot hex for each contending army. Depots determine the general direction of retreats. Units that return to the game due to a Rally To The Colors Event (8.1B) do so on or within 4 hexes of a friendly Depot hex. An enemy unit within 4 hexes of a friendly Depot hex causes all friendly units to suffer a -1 Morale modifier (6.0).
  • 1.48 Displace: A unit located in a BLAZE hex (7.33D and 15.63) or illegally stacked (5.0) must Displace. All rules pertaining to retreats apply to Displaced units except they only retreat 1 hex regardless of unit type.
    • Units with their increments in (parenthesis), represent units which do not cause their Commands to Shatter (7.1).
    • Units with 'DC' after their increments may deploy Detached Companies (4.7).
    • Artillery units have Low Ammo (4.58) circles after their increments which are used to keep track of the artillery unit's ammunition supply.
    asterisks

    Design Note: The extra range represents skirmishers' ability to extend their sphere of influence in advance of formed units and not necessarily longer ranged weaponry.

  • 4.46 General: Units not in March formation automatically enter General formation when entering Terrain hexes (not hexsides) designated as General Terrain. Units in General formation are oriented in any way desired as they have all around front hexsides. Infantry units in General formation may fire up to 3 increments per hex, but each increment is limited to firing at every other adjacent hex. Infantry units (not cavalry) with their Fire value in asterisks may double their Fire Multiplier (x2) and opt to fire on the Skirmish results table instead of the Musketry Fire table. Cavalry in General formation may not fire. Artillery in General formation may only fire at Close Range (4.54). Units change from General to any eligible formation when exiting a General terrain hex into a non-General terrain hex, paying formation change MP cost. This formation change may occur adjacent to an enemy unit and does not trigger Opportunity Fire but still triggers Defensive Fire per 11.5. A unit forced to leave General formation due to a retreat result may assume any permissible formation of the owning player's choice after retreating to a new hex.

  • 4.69 A Multi-hex formation marked with a MELEE marker (6.31A) with an eligible enemy target in the front facings of both hexes may only attack one target hex, (owning player's choice which hex) during Resolution (13.0), benefitting from a +1 Melee modifier. If the target hex is in the front facings of both hexes of a Multi-hex unit then both hexes may participate in the Melee. If the target hex is in the front facing of only one hex then only half of the unit's increments per 4.62 may participate.
    • Example: The French Légère at left assaults the Russian battalion from both its hexes, applying a +1 Melee modifier. At right, the Ligne battalion assaults one hex (half) of the Russian Militia unit.
  • L. Volley: An infantry unit that passes this Task Check loses its ASSAULT marker and may immediately Defensive or Opportunity Fire against an adjacent enemy unit. (See 11.49).
    • if the result is ODD the Leader is captured. Remove from the map.
    • if the result is EVEN the Leader Evades by immediately moving to the nearest friendly unit. Leaders unable to Evade due to enemy units, impassable terrain or for being Unhorsed (7.33E) are captured.
  • F. Lightly Wounded: One Leader in the target stack is lightly wounded. Place Lightly Wounded Leader on Turn track and replace per 7.2. On a roll of 7 or more during any subsequent Rally segment (14.3) the Leader returns to play stacked with a friendly unit of his Command. Remove or demote any acting replacement Leader.
  • G. Grievously Wounded: One Leader in the target stack is grievously wounded. Remove from play and replace per 7.2. Replace with a Leader with that nation's Replacement Leader values.
  • H. Killed Leader: One Leader in the target hex is killed on the field of battle. Remove from play and replace per 7.2.
    • OOC Leaders apply a -2 modifier to Order Acceptance, Leader Initiative and Command Commitment Checks.
    • OOC units apply a -2 modifier to all Morale and Task Checks.
    • OOC units are prohibited from moving adjacent to enemy units, even if their Command carries an Attack or Engage Order. However units already adjacent to an enemy unit are not required to move away.
    • Musketry Fire: A successful hit from an infantry unit in Column, Line, Square or General formation causes the enemy unit to suffer ONE casualty and to make a Morale Check. A natural 10 also causes the enemy unit to suffer a SLC.
    • Skirmish Fire: A successful hit from a unit in Skirmish or General formation causes the enemy unit to make a Morale Check. A natural 10 causes the enemy unit to suffer Disruption (No MC roll required) and a SLC.
    • Artillery Fire: A successful hit from an artillery unit against any unit that is not Unlimbered artillery causes the enemy to suffer ONE casualty and to make a Morale Check. If the fire attack roll result is a modified 20 or more the hit results in TWO casualties. A natural 10 also causes the enemy unit to suffer a SLC.
    • Counter-Battery Fire: A successful hit from an artillery unit against Unlimbered artillery causes the enemy unit to make a Morale Check. If it fails, it Disrupts and must Limber immediately. A natural 10 causes the enemy unit to automatically suffer Disruption (No MC roll required), to Limber immediately and a SLC.
    • Ricochet Fire: An artillery unit which successfully hits an enemy target with regular Artillery Fire or Counter-Battery Fire (not Defensive Opportunity or Ricochet Fire), may hit units (both enemy and friendly) beyond the original target hex with Ricochet Fire.
      • Using a straight edge, draw an imaginary line from the center of firing artillery unit's hex to the center of the target hex which was successfully hit. Any hex beyond this target hex up to half (x 1.5) the Effective Range of the firing artillery unit is a potential target of Ricochet Fire.
      • Units in Hindrance, Sloping or Broken terrain may be the target of Ricochet Fire but units beyond these terrain obstructions may not.
      • For each ricochet hex roll a d10. A roll of 10 or more results in a Ricochet hit. Apply only positive formation modifiers for the target hex. Ignore all other modifiers. A SLC and MC is generated in every hex hit. Otherwise there is no effect.
      • Ricochet paths which run along a hex spine affect one of the two adjacent hexes, not both.
  • 11.35 Units may not fire if:

    • The line of fire is traced through or over a friendly Leader or unit.
    • The line of fire is traced through enemy units. Units may fire over enemy units however.
    • They are marked with an ASSAULT or CHARGE marker. (Exception: Volley, see 11.49)
  • 11.36 An Unlimbered artillery or Skirmish unit may not fire at a target 2 or more hexes away if there is at least one enemy unit in any of its adjacent front facing hexes.

  • They are in Skirmish formation, OR
  • Start their Movement adjacent only to enemy units in Skirmish formation, OR
  • They are cavalry using Dash, OR
  • They are stacked with a Leader, OR
  • There is intervening Terrain Impassible to either the moving unit or the adjacent enemy unit.
  • Units which Disengage from a hex trigger Defensive/Opportunity Fire (11.5) and may not move adjacent to an enemy unit later during their Movement Segment, even if a different enemy unit than the one Disengaged from. Enemy units with ASSAULT or CHARGE markers adjacent to a unit which Disengages may Advance Before Combat (12.23) into the first hex just vacated.

    When changing formation in a hex, a unit or stack suffers target modifiers according to the formation they are changing FROM, not INTO. When moving from a hex, a unit or stack suffers target modifiers according to the terrain they are moving FROM, not INTO.

  • Exhausted: Cavalry units with Exhausted Readiness halve their MA (round up).
    • Example: A cavalry unit with a 13 MA would be halved to a 7 MA if Disrupted and halved again to 4 MA if Exhausted.
  • 11.49 Volley: An infantry unit marked with an ASSAULT marker that successfully passes a Volley Task Check loses its ASSAULT marker and may immediately Defensive Fire against a unit that moves to an adjacent front hex or Opportunity Fire against a unit that exits an adjacent front hex.

  • 14.43 Units in a Strongpoint hex or stacked with AdCs need not retreat as part of a Commitment check. Owning player may opt to do so however.

  • 14.44 Army, Echelon Leaders and Echelon units in Command Range (9.5) of the Leader that failed its Commitment Check may retreat if desired by the owning player.

  • 14.45 Full Retreat: As an exception to 14.42 and 14.43, if a Commitment Check results in a natural 1, ALL units of a Brigade Command Leader which fails a Commitment check must retreat even if not adjacent to an enemy unit.

    Design Note: Commanders on the field are more reluctant than the player, to push their troops to the last man. Commitment checks creates a layer of decision making on behalf of these Leaders which may be against the intentions of the player.

  • Yes
    No
    Reaction
    0 (note 2)
    Yes, -3
    Reserve+2 modFull8 hexes from enemyOpp/DefNoNo0 (note 3)Auto-Fail
    Miss: Low Ammo ¹
    Miss: Low Ammo ¹
    0/Dr/Rt
    0/MC/~
    0/Dr/Rt
    0//
    1/Dr/Rt
    0//
    2/2Dr/Rt
    Cavalry vs Cavalry0/MC/~0/Dr/Rt0/MC/~1/Dr/Rt0/~/Pr22/Dr/Rt0/~/Pr42/2Dr/Rt
    Cavalry vs Inf/Art0/MC/Rt0/Dr/~0/MC/~1/Dr/Rt0/~/Pr22/Dr/Rt0/~/Pr42/2Dr/Rt
    Cavalry vs Square0/MC/~0/MC/~0/MC/Pr00/Dr/Rt0/~/Pr21/Dr/Rt0/~/Pr42/2Dr/Rt
    0/MC/~
    0/Dr/Rt
    0/MC/~
    1/Dr/Rt
    0/MC/~
    2/2Dr/Rt
    0//
    Infantry vs Cavalry0/Dr/Rt0/MC/~0/Dr/Rt0/MC/~1/Dr/Rt0//2/2Dr/Rt0//
    Cavalry vs Square0/Dr/~0/MC/~0/Dr/Rt0/MC/~1/Dr/Rt0/MC/~2/2Dr/Rt0//
    Inf/Cav vs Artillery0/Dr/~0/Dr/~1/Dr/Rt0/MC/~1/2Dr/Rt0//2/2Dr/Rt0//
    HS
    LW
    8LWLWGW
    9GWGWGW
    10KKK