Sudden Conflict
Sudden Conflict Rulebook
Table of Contents
Table of Contents
Components
- 10 × Black Action Dice
- 10 × White Momentum Dice
- 1 × Initiative Token
- 30 × Damage Tokens
- 6 × Miniatures
- 6 × Ready / Acted Tokens
- 6 × Defeated Tokens
- 6 × Bless Status Tokens
- 6 × Curse Status Tokens
- 6 × Hex Status Tokens
- 6 × Character Cards
- 2 × Reference Cards
Setup
1. Choose a Battlefield
Choose a battlefield to use for this game. Place it in the middle of the table, then place Defeated tokens, Status tokens, Damage tokens, Action dice, and Momentum dice around it in easy reach of both players.
2. Build Teams
Each player builds a team of three Characters. Each Sudden Conflict set comes with two sets of three Characters in pre-made teams, but you're welcome to build your own team using any Characters you own. A team cannot have multiple copies of the same Character.
The two pre-made teams in the Valrona core set are the Ashen Alliance (Belle Thrushwood, Krandus Moore and Dame Sapphire) and the Tryptic Vile (Nikola Marcellus, Ginger and Gulmar).
Take the miniatures and Character cards for each of your Characters and place them in front of you. Place a Ready token on each Character card, Ready-side up.
3. Deploy Characters
Randomly choose one player to take the Initiative token. The other player gains a Momentum Die.
The player with the Initiative token places one of their Characters' miniatures on a space in any Deploy Zone on the battlefield that doesn't already have a Character in it. Then the other player repeats this process with one of their Characters.
Continue repeating this process until all Characters have been deployed.
Deploy Zones
Deploy Zones are the areas of the Battlefield where Characters can be Deployed at the start of the game.
Groups of spaces connected by dotted lines are all considered to be the same Deploy Zone. If a Character has been Deployed to one of those spaces, other Characters may not be Deployed to any of the other connected spaces.
Battle
Sudden Conflict is played over several rounds. Each round proceeds as follows:
1. Initiative Phase
The Initiative phase determines who has the Initiative token this round, which allows them to act first.
Skip this phase in the first round; you've already determined who has the Initiative token in the Deploy Characters step.
In subsequent rounds, to determine who has the Initiative token:
- Both players roll 5 Action dice. Momentum Dice cannot be spent on this roll.
- The player who rolled more Hits takes the Initiative token this round. If players are tied, the player with the Initiative token keeps it.
- The player who doesn't have the Initiative token gains a Momentum Die.
2. Action Phase
The Action phase is where Characters use their Actions to try to manoeuvre through the battlefield and defeat their enemies.
- The player with the Initiative token chooses one of their Ready Characters to act. It becomes their turn.
- The acting Character gets 2 Action Points. These Action Points may be spent on Actions on their Character card. Using an Action costs 1 Action Point. Each Action may only be used once per round, unless otherwise specified.
- Once all Action Points are spent and effects have resolved, flip the Ready token Acted-side up on the Character card to represent that they have Acted this round (and are therefore no longer Ready).
After a Character has finished acting, the opposing player chooses one of their Ready Characters to act and repeats the process above. Continue repeating this process until all Characters have Acted this round.
Players may choose not to spend all of their Action Points each round; however, Action Points that are not spent are lost.
3. Recovery Phase
The Recovery phase prepares Characters for the next round and bolsters teams that lack Momentum.
- Flip each Character's Ready token Ready-side up.
- Each player that has no Momentum Dice, gains one Momentum Die.
This round is now over, and a new round begins! Continue playing rounds until all Characters on either team are Defeated.
Hits
Dice in Sudden Conflict have two possible results: blank or Hit. Each Hit you roll increases the effectiveness of your Action.
Character Card Anatomy
- Health: The number of Damage tokens a Character can have before they are Defeated.
- Defences: How many Action dice this Character rolls when they Defend against different kinds of hostile Actions.
- Actions: Everything this Character can do.
- Action Tags: These modifiers affect what Actions can target and how they function.
- Action Dice: The number of Action dice you roll when using this Action.
- Action Type: If an Action causes its target to Defend, they do so with the Defence type that matches this icon.
Using Actions
Each Character has several Actions on their Character card. To use an Action, spend 1 Action Point.
Remember, each Action may be used once per round, unless otherwise specified.
When you use an Action, declare any choices you're making with it at the same time (such as which target you're attacking, which square you're moving to, and so on). If there are no valid targets for an Action, you cannot use it.
Actions have Tags that modify the way they work or identify what they do. Tags are detailed as follows:
Attack
Attacks are used to deal damage and ultimately defeat enemy Characters.
When you use an Attack, do the following:
- Choose a valid enemy target (see Melee and Ranged).
- Roll Action Dice equal to the number in that Action's icon.
- Your target Defends. Your opponent rolls a number of Action Dice equal to the targeted Character's Defence, matching the Action's type (either Body, Mind or Soul). Each Hit that the Defending player rolls cancels one that you rolled.
The number of Hits remaining determines the Attack's final effect. If an Attack has no remaining Hits after the opponent Defends, the Action's additional effects in the same sentence do not happen (not just effects that depend on Hits), and you gain a Momentum Die (see Momentum Dice, page 24).
Melee
Melee Attacks may target enemies in a space adjacent to the user (horizontally, vertically or diagonally).
Ranged
Ranged Attacks may target enemies within line-of-sight of the user.
Ranged Attacks cannot be used if an enemy Character is in a space adjacent to the user (it's impossible to aim with an enemy in your face!).
Area
Instead of a single target, Area Actions simultaneously affect any number of valid targets. When you use an Area Action, roll the number of dice required once, then resolve each target's Defence and effects in whatever order you choose, using all of the Hits you rolled for each target.
You must fail to receive any Hits for all targeted Characters in order to gain a Momentum Die (see Momentum Dice, page 24).
Example: No Hits
Melee Attack: Tearing Claws (3 Action dice). Deal Hit damage, then place a Hex token on your target.
Ginger uses 'Tearing Claws', but has no Hits after her target Defends. In addition to not dealing any damage, she also doesn't Push her target.
All is not lost! Because she had no Hits, she gains a Momentum Die. Better luck next time, Ginger!
Source note: the printed example says Ginger "doesn't Push her target", although the Tearing Claws card text printed in the rulebook has no Push effect. The example is transcribed as printed.
Ability
Abilities do not deal direct damage to their targets. Abilities may target a mix of allies, enemies or any Character in line-of-sight (including the user).
Abilities are used to manipulate the game (and Characters) without dealing direct damage to an enemy.
Abilities require line-of-sight to your target (if it requires a target) and may be used even if an enemy is in a space adjacent to the user.
Like Attacks, the number of Hits remaining determines the Ability's final effect. If an Ability has no Hits remaining after its target Defends, none of the Ability's effects occur, and you gain a Momentum Die.
Abilities specifically detail who they target. Any allies targeted do not roll to Defend against them.
Movement
The battlefield is divided into spaces. When an Action instructs you to move a Character, move them one space at a time to their destination. Characters may be moved up to the number of spaces listed on the Action.
Characters may move horizontally, vertically, and diagonally to any unoccupied adjacent space.
Remember that Barriers and other Characters block line-of-sight with their entire space, so diagonal movement usually isn't possible if a Character or barrier is in a space adjacent to a destination.
If a Character can pass through another Character while moving, they cannot end their movement in the same space as that Character.
If a Character can pass through a barrier, they cannot leave the battlefield.
Finally, if an Action allows you to move multiple Characters, you must finish moving one Character before moving the next.
Example: Survey the Troops (Movement Action). Move 5 spaces, then gain a Momentum Die for each ally in line-of-sight.
Passive
Actions with the Passive Tag work differently from other Actions. They cannot be one of your choices when that Character acts and do not cost an Action Point; instead, their effects always occur, sometimes whether you want them to or not. Some have effects that constantly persist, while others only trigger when something specific happens.
Passive Actions do not function if the Character is Defeated. Passive Actions with the Defeated Tag only function if the Character is Defeated.
Simultaneous Effects
If multiple effects trigger at the same time, the acting player decides which order they occur.
Example: Dame Sapphire has targeted Gulmar and Nikola with Bands of Belconnen (an Area attack) and has rolled 2 Hits. The player controlling Dame Sapphire decides which of the targets will Defend first.
Line-of-Sight
Many Actions check for line-of-sight to see if a target is valid. A Character has line-of-sight to a space if a straight line can be drawn from the middle of their own space to the middle of the space they're targeting, without intersecting any barriers or any spaces occupied by other Characters (including corners).
The middle of spaces are marked with a dot, a ring or a star marker. The corners of spaces are marked with a plus sign.
Diagram: a line drawn to a space with a clear path is CLEAR. A line that crosses a barrier is BLOCKED BY BARRIER. A line that crosses a Character is BLOCKED BY CHARACTER.
Barriers
Barriers are represented by thick lines between spaces. They block movement and line-of-sight between those spaces. Spaces separated by barriers are not adjacent to each other.
Hazard Tiles
Hazard Tiles represent dangers on the battlefield such as chasms, flames or falling rubble, which can damage Characters that linger on them.
A Character that begins their turn on a Hazard Tile immediately takes 1 damage.
Hazard Tiles do not block line-of-sight, and Characters can move through them without penalty.
Defences
When Characters Defend against an Attack, they do so with one of three types of Defence:
- Body: Crude blows, heavy impacts and toxic poisons are resisted by the Body. A Character's Body represents their ability to endure brute force, shrug off blows and resist corporeal methods of incapacitating them.
- Mind: Devious ambushes, hypnotic manipulation and direct mental attacks are resisted by Mind. A Character's Mind measures their ability to maintain their discipline under extreme stress and see through their opponent's tricks.
- Soul: Arcane fire, spiritual forces and the most desperate blows are resisted by the Soul. A Character's Soul shows their ability to ignore or extinguish emotional energies before they cause lasting harm.
- None: Do not roll to Defend against Actions with this symbol.
Damage and Defeat
Damage represents harm dealt to your enemies. When an Action instructs you to deal damage, place that many Damage tokens on your target. The number of Damage tokens on a Character cannot exceed their Health; if there are ever more Damage tokens on a Character than their Health, remove tokens until they match.
When a Character's Damage tokens meet their Health value, that Character is Defeated. When a Character is Defeated, remove their figure from the battlefield and replace it with their Defeated token.
A Defeated Character is down but not out. A Defeated Character gains the following characteristics:
- They may spend 2 Action Points to gain a Momentum Die.
- They do not block line-of-sight.
- Characters may move through them, but cannot end their movement in their space.
- Characters cannot be Pushed through them.
- They don't prevent adjacent enemies from using Ranged Attacks.
- Damage cannot be added or removed from them (unless an Action specifically instructs otherwise).
- They may only use Actions with the Defeated Tag, and Passive Actions no longer work!
- Action Points cannot be spent to remove Hex tokens.
Attacks and other Actions may still target Defeated Characters! Defeated Characters gain and lose status tokens, roll to Defend themselves, and are subject to the non-damaging effects of Actions.
The Defeated Tag
An Action with the Defeated Tag is a Character's last resort in the most dire of situations. Only Defeated Characters can spend Action Points on Defeated Actions, so they can only be used if the Character is Defeated.
Winning the Game
If all of your opponent's Characters are Defeated at any time, you win!
If somehow all Characters are Defeated at the same time, the player whose Character most recently acted wins – a pyrrhic victory is better than no victory!
Push
When an Action instructs you to Push a Character, move it in a direction away from the Character whose Action caused the Push. If there are multiple directions that would increase the distance between the Pushing Character and the Pushed Character, you choose which direction to move them. The Pushed Character should never be closer to the Pushing Character on any space during the Push than they were when the Push started.
When a Character is being Pushed, they MUST be moved the full distance, unless they are Pushed into a barrier or another Character.
If the Pushed Character is prevented from moving into a space by a barrier or another Character, the Pushed Character takes 1 undefended damage instead and the Push effect ends. If the movement was prevented by another Character, that Character takes 1 undefended damage as well.
If any Action Pushes multiple Characters, you must finish Pushing one Character before Pushing the next.
If a Character is prevented from moving by multiple Barriers and/or Characters, choose one of them to prevent the movement and allocate damage accordingly.
Example: Push
Belle uses her 'Thunder Rifle' Action on Gulmar, and gets 1 Hit after defence. In addition to dealing damage, that allows her to Push Gulmar one space.
Gulmar can't be Pushed south, south-east or east, because he would be closer to Belle.
Pushing Gulmar north, north-east or south-west would move him one space in that direction.
Pushing Gulmar north-west, west or south-west would cause him to collide with either a barrier or Nikola, since they block his movement. In these cases, Gulmar would take an additional 1 undefended damage. If Gulmar collides with Nikola, Nikola would also take 1 undefended damage.
Momentum Dice
Momentum Dice represent your team's ability to recover from a setback or press the advantage. They're gained in four ways:
- When you begin a round without the Initiative token.
- When you roll dice for an Action and fail to receive any Hits, by either rolling blanks or having your opponent cancel your Hits after Defending.
- When you end the round without any Momentum Dice.
- When an Action tells you to.
Momentum Dice are a shared pool for your entire team. Any Character on your team can spend your Momentum Dice, no matter how you gained those dice. You may have any number of Momentum Dice.
Before rolling Action Dice, you may choose to add any number of Momentum Dice you have available. This includes when using an Action or when Defending against an Action, but not when rolling for Initiative.
Momentum Dice have Hits just like Action Dice, and are counted just like other Hits when determining the effects of an Action. Once the Action has been resolved, discard any Momentum Dice you used.
Status Tokens
Many Actions apply lingering status effects that can harm your enemies or help your allies. When an Action instructs you to apply a Status token to a target, take the corresponding status token from the supply and place it on that Character's card.
Each status token has a different effect, and each of Sudden Conflict's realities have different Status tokens.
Bless
Divine blessings, no matter their origins, are powerful boons that can turn fate to your side.
The next time you roll dice for a Character with any number of Bless tokens, either using an Action or to Defend, reroll any non-Hit results you receive on your first roll, then remove all Bless tokens from that Character.
Curse
Curses are misfortune to those afflicted by them.
The next time you roll dice for a Character with any number of Curse tokens, either using an Action or to Defend, reroll any Hit results you receive on your first roll, then remove all Curse tokens from that Character.
Hex
Hexes are crippling afflictions forced upon a Character, preventing them from fighting back.
When a Hex is applied to a Character, the player who applied it chooses one of the afflicted Character's Actions and places a Hex token on it. While a Hex token is on an Action, that Action may not be used. A Hexed Character (who is not Defeated) may spend 1 Action Point to remove one of their Hex tokens.
Bless and Curse
Bless and Curse are opposites and cancel each other out. If a Character has a Bless or Curse token and the opposite token would be placed on them, remove the existing token instead.
Play Example
The following narrative describes the start of a round of combat, beginning with the Initiative phase and proceeding through one Character's turn.
Amy is playing the Characters from the Ashen Alliance, while Liam is playing the Characters from the Tryptic Vile.
It's the start of the round, so play begins with the Initiative phase. Amy and Liam each roll 5 dice. Amy rolls 3 Hits, while Liam rolls only 2 Hits.
Since Amy had more Hits, she takes the Initiative token. Liam gets a Momentum Die because he didn't get the Initiative token.
The Initiative phase is now over, so play proceeds to the Action phase. Amy has the Initiative token, so she chooses one of her Ready Characters to act.
She decides to act with Belle Thrushwood and gains 2 Action Points to spend on Belle's Actions.
Amy decides that she wants to move up and attack Liam's Nikola. First, she'll need to get in range. She spends 1 Action Point on Belle's 'Survey the Troops' Action.
Survey the Troops (Movement): Move 5 spaces, then gain a Momentum Die for each ally in line-of-sight.
She moves Belle three spaces, stopping on a space adjacent to Nikola.
Then Amy checks if any of her allies are in line-of-sight. Krandus is, but Dame Sapphire is not, so she gains 1 Momentum Die.
Now that she's in range, it's time to attack! Amy spends her second Action Point on Belle's 'Duelling Sabre' Action, choosing Nikola as its target.
She decides to use the Momentum Die she just gained on this roll, so she rolls a total of 3 dice (2 from the Action and 1 from Momentum) and gets 2 Hits.
Melee Attack: Duelling Sabre (3 Action dice). Deal Hit damage, then Belle gains a Bless token.
Now that Amy has rolled for Belle's attack, Liam gets to roll for Nikola's defence. 'Duelling Sabre' is a Body Attack, and Nikola has a Body Defence of 2, so Liam rolls 2 dice, and gets 1 Hit.
Each of Nikola's Hits cancels out one of Belle's Hits. Nikola got one, and Belle got two, so that leaves Belle with one remaining uncancelled Hit.
'Duelling Sabre' deals 1 damage for every Hit, so Amy places a Damage token on Nikola. 'Duelling Sabre' also places a Bless token on Belle, so Amy does that too.
Amy doesn't have any more Action Points to spend with Belle, so she flips Belle's Ready token to its Acted side.
It's now Liam's turn to act with one of his Ready Characters!
Multiplayer Games
One Sudden Conflict core set provides a two-player experience, allowing you to explore the world of Galactic Throne and determine the central conflict affecting that reality.
You can expand the game to include up to four players when you combine multiple Sudden Conflict sets.
For games with three or four players, all two-player rules for Sudden Conflict apply with the following exceptions:
Team Size
In three and four player games, each player builds and controls a Team of two Characters instead of three.
The Initiative Token
During the Initiative Phase, if there is a tie, the Initiative Token passes clockwise, to the player on the left of the current holder.
Turn Order
The turn order begins with the player with the Initiative Token and passes clockwise around the table.
Defeating a Team
When all Characters on a team are defeated, remove their Defeated tokens from the Battlefield. That player is eliminated from the game, and all remaining players immediately gain a Momentum Die.
Glossary
Act (p. 16): When you act with a Character, choose Actions on their card to perform. Then flip their Ready token to its Acted side.
Action (p. 18): One of the things your Character can do when they act. Each Action costs 1 Action Point to use (unless otherwise noted).
Action Phase (p. 16): The second phase of a round, where most of the game's action takes place. Starting with the player who has the Initiative token, each player takes turns choosing one of their Ready Characters to act with.
Action Point (p. 18): When you choose to act with a Character, they gain 2 Action Points to spend on different Actions. Unspent Action Points are lost.
Adjacent (p. 20): Each space is adjacent to the eight spaces surrounding it (horizontally, vertically and diagonally), unless line-of-sight to those spaces is blocked by a barrier (but not a Character).
Ally: The other two Characters on a Character's team are its allies. Characters are not their own allies, so Actions that specifically target allies cannot target themselves.
Attack (p. 18): A type of Action that targets an enemy to inflict damage or some other harmful effect.
Barrier (p. 19): A feature of the battlefield that prevents line-of-sight between spaces.
Battlefield (p. 19): The environment where your battle takes place, composed of a grid of spaces.
Body (p. 21): A type of Defence, representing your Character's ability to absorb physical harm.
Character: One of the combatants in the conflict. Each Character is represented on the battlefield by their miniature or Defeated token, and their Actions are written on their Character card.
Defeated (p. 22): A Character is Defeated when their Damage tokens match or exceed their Health. If all enemy Characters are Defeated, you win! Defeated doesn't mean dead, though; some characters may still use Defeated Actions to assist their allies.
Deploy (p. 15): At the start of the game, Characters are each Deployed to different Deploy Zones.
Enemy: Characters on the opponent's team are enemies.
Hazard Tile (p. 19): A Character who begins their turn on a Hazard Tile takes 1 undefended damage.
Hits (p. 16): A successful roll. Hits determine the power of your Actions.
Initiative Phase (p. 16): The first phase of a round. Both players roll 5 Action Dice. Whoever has more takes the Initiative token and acts first in the Action phase. The player who didn't get the Initiative token gets a Momentum Die.
Line-of-Sight (p. 19): A Character has line-of-sight to a space if an uninterrupted straight line can be drawn from the middle of their square to the middle of the target space.
Melee (p. 18): A Melee Attack may target any adjacent enemy.
Mind (p. 21): A type of Defence, representing your Character's ability to overcome mental challenges.
Momentum (p. 24): A die that bolsters your Action or Defences. You may roll Momentum Dice along with Action Dice to add their Hits to your result. After the Momentum Dice are rolled, discard them.
Move (p. 20): To move a Character a number of spaces on the battlefield. Characters can move vertically, horizontally, and diagonally, but cannot move through barriers or other Characters. You may choose to move less than the number of spaces stated on your own Actions.
Passive (p. 20): A type of Action that is either always active, or is triggered under a specific condition, and cannot be chosen when you Act. They do not cost an Action Point to use.
Push (p. 23): To forcibly move a Character a number of spaces away from the Pushing Character. If the Pushed Character collides with a Barrier or other Character, they take 1 undefended damage; if they collide with another Character, that Character also takes 1 undefended damage.
Ranged (p. 18): A Ranged Attack may target any Character in line-of-sight, but cannot be used if an enemy is adjacent to the user.
Ready (p. 16): You may choose to act with any Ready Character. Ready Characters have their Ready token with its Ready side up. All Characters become Ready again in the Recovery phase.
Recovery Phase (p. 16): The third and final phase of a round. Ready all Characters, then players without Momentum Dice gain one Momentum Die.
Soul (p. 21): A type of Defence, representing your Character's ability to resist emotional energy.
Space (p. 19): An area of the battlefield. Each space may be occupied by a single Character.
Undefended Damage: Characters do not roll to defend against undefended damage.
Source note: the printed glossary entry for Momentum has the Hit symbol missing in the source layout ("add their to your result"); "Hits" is supplied here from the Momentum Dice section on page 24, which says Momentum Dice count as Hits.