Stink-Alarm!
Stink-Alarm! Rulebook
Table of Contents
Table of Contents
Components
1 electronic timer, 12 round picture cards, 60 square Stink cards (5 per picture card), 24 Stink chips.
Before the First Game
- Punch out the punch boards and carefully push out the Stink cards, the picture cards and the Stink chips.
- Take the timer and pull the safety strip out of the battery compartment.
Setup
- Shuffle the square Stink cards and place them fly-side up in an unordered pile in the middle of the table, so that all players can easily reach them.
- Place the timer next to the pile of Stink cards.
- Shuffle the round picture cards and deal them to the players as follows:
- Two players: each player receives 6 picture cards.
- Three players: each player receives 4 picture cards.
- Four players: each player receives 3 picture cards.
- Five or six players: each player receives 2 picture cards. With five players, two picture cards remain. They are removed from the game.
- Important: Each picture card belongs with five Stink cards. These Stink cards are also removed from the game.
- Each player places his or her own picture cards face up in front of them.
- Put the Stink chips into the box. You will not need them until later.
Playing the Game
- The oldest player begins. He or she presses the start button on the timer, takes any Stink card from the middle and places it on the matching picture card.
- If the Stink card is placed on one of the player's own picture cards, that player immediately takes another turn.
- If the Stink card is placed on the picture card of another player, that player is the next to take a turn.
- So it is always the player who has just had a Stink card placed on his or her picture card whose turn it is. Each player tries to place the Stink card he or she has drawn on the matching picture card as quickly as possible, because when the timer runs out, the fun is over.
Whoever gets the Stink card is up next.
When the Timer Runs Out
- As soon as you hear the closing sound ("Stink-Alarm!"), the player whose turn it is receives a Stink chip, and the round ends.
End of the Round
- Return all Stink cards face down to the middle and shuffle them well.
- Each player passes one of his or her picture cards to the left-hand neighbour.
- The next round then begins. The player who received the Stink chip may start the timer again and draw the first Stink card.
Timer Run Time
- Always place the Stink cards as quickly as possible, because the run time of the timer varies. A round can therefore end very quickly. It pays to be quick when placing cards right at the start of a new round as well.
- Tip: You can of course also play at risk and take plenty of time when placing cards at the start. This is a good way to annoy your fellow players.
End of the Game
- When a player collects a fifth chip, the game ends.
- Tip: You can of course also reduce the number of chips and so play fewer rounds.
Timer: Battery Use, Safety and Care
Battery Use
- The timer works with two button cells of type 1.5 V LR44/A76/KA76/V13GA. Replacing the button cells must be carried out by an adult. The battery compartment cover is on the underside of the timer. Open the cover with a Phillips screwdriver. Insert the button cells so that the plus and minus poles match the markings and symbols in the compartment, then screw the cover back on.
Safety Notes
- Non-rechargeable button cells must never be recharged.
- Rechargeable button cells may only be charged under adult supervision.
- Rechargeable button cells must be removed from the toy before being charged.
- Different types of button cells, or new and used button cells, must not be used together.
- Insert button cells according to the polarity signs "+" and "-".
- When the button cells are flat, or when the toy is not used for a long time, the button cells must be removed.
- The connection terminals must not be short-circuited.
- The use of alkaline manganese button cells is recommended.
- Use only button cells of the specified type or an equivalent type.
- Always replace all button cells at the same time, never just some of them.
Care Instructions
- For cleaning, wipe the surface with a dry or slightly damp cloth. Do not use chemical solvents.
- Do not expose the timer to direct sunlight or any other heat source.
- Take care that no liquids get into the timer.
- The timer must not be taken apart.
First Aid for Problems
If the timer does not work as expected, first try the following:
- If the sound is distorted, too quiet or too slow:
- Check that the button cells are inserted correctly.
- Insert fresh button cells.
- If this does not solve the problem, remove the button cells for a few minutes and then try again.
Disposal
- Do not dispose of the electrical components in household waste. Return them to a collection point for electrical waste. Ask your local council about the options for returning or collecting old appliances. This symbol on a product means it must be disposed of this way.
Please Note
- Warning! Not suitable for children under 36 months. Risk of choking due to small parts that can be swallowed.
- Please keep these instructions.