Solace
Solace Rulebook
Table of Contents
Table of Contents
Materials
- 31 Starter High-rise cards
- 9 Utility cards
- 8 Room cards
- 16 Time/Reinforcement cards
- Mission packs: Pack 1 (19 cards), Pack 2 (19 cards), Pack 3 (25 cards), Pack 4 (20 cards), Pack 5 (21 cards)
- 36 Action cards (9 per agent)
- 4 Agent Token cards
- 4 Agent Character cards
- 1 Leader card
- 1 Campaign booklet
- 1 Rulebook
Component Overview
High-rise cards
These cards create the High-rise that the players are raiding, and they comprise different Threat cards, Hostage cards, Room cards and general Target cards. Agents will interact with them, trying to neutralize Threats, clear rooms, or rescue hostages.
Threat cards. Most of the cards in the High-rise deck are Threat cards, where Threats are usually enemy soldiers, pieces of tech, or other risks to the agents. They usually come into play during the High-rise phase, activating the action boxes, and are removed from play when a player matches their Resolution box. You don't need to deal with every Threat: most Threat cards can be avoided by placing them under the stack thanks to a Movement (more info on page 13).
Hostage cards. Hostage cards are similar to Threat cards, each having a Resolution box and an action box, but they are the main way of acquiring points and accomplishing the mission. Moreover, for every hostage rescued, agents get an immediate reward. After rescuing a hostage, put the card in the Loot pile.
Room cards. Like Threat cards, these have an action box and a Resolution box. Some of them are obstacles and others give agents rewards when they are cleared.
Patrol cards. Patrols are special Threat cards: they start in the High-rise, are deployed onto stacks at the end of setup, and move between floors. They are considered LOCKED, so a movement cannot be used to place them under a stack (see Threat Movement on page 20). Patrol cards are never shuffled when building the High-rise, but they are placed only in a specific step at the end of the setup.
Unique cards. These cards are like Threat cards, but they also serve as main characters or objectives of the current mission. They can be found only in the packs, and are normally included in the setup of the mission (or set aside to be used later, through Objective cards). When playing in Arcade mode, do not shuffle them in the High-rise deck.
Reinforcement cards. Reinforcement cards are similar to Threat cards, but they come into play only when the alarm is ON or through action boxes. They are considered LOCKED, so a movement cannot be used to place them under a stack with movement (see Action Types – Movement). If neutralized, they go on the Loot pile, not the Reinforcement pile or the Time deck.
When face down in the Time deck, they are referred to as Time cards (see 18 or 22).
Utility cards
These cards are needed to play the game, and they are placed during setup.
Alarm cards. These cards determine the behavior adopted during the Defcon phase. When an Alarm is turned ON or OFF, consult the box at the bottom of the card to see what Defcon card needs to be put on top of it.
Example: If, with DEFCON 4 visible, the alarm has to be turned ON, flip the card to show DEFCON 1. If, when in DEFCON 1, the alarm has to be turned OFF, replace the Alarm card with the one underneath, showing DEFCON 3.
Random cards. These cards are used to determine random floors or random movements (see Random cards on page 23 for how to use them).
- A: Random floor
- B: Random movement
Objective cover/Exit card. This card is used to conceal objectives that have not yet been revealed in a mission (and thus to avoid spoilers). Once the final Objective has been revealed, flip the card so that it becomes the Exit card, to be placed on a floor to tell players where the exit from the High-rise is.
Objective cards. Objective cards guide the flow of a Campaign mission. Agents need to complete the revealed objectives in order to proceed through the mission.
- A: This is the current objective. As soon as the objective has been reached, read the cutscene indicated in the box in the bottom right-hand corner of the card. Then remove the Objective from the game.
- B: The yellow danger sign (when present) indicates special rules that players must follow until the objective has been reached and removed from the game.
- C: This is the outcome of the objective corresponding to the cutscene to be read.
Agent Token and Agent Character cards
The Agent Token card is used to represent agents on the floors of the High-rise. When disrupted, they are flipped to reveal their disrupted side.
The Agent Character card has one side showing the agent's special power, and one side where it is not shown (meaning that it has been used, or that the agent started the mission without the special power). This card, placed in front of the player, is mainly used to plan the actions according to the Planning phase, placing Action cards underneath it.
Action cards
Action cards are the players' main means of planning actions and executing them in the course of the game. These cards have two boxes, one per side, with symbols to indicate the specific agent's actions. Action cards are used during the Planning phase, when they are placed partially under the Agent Character card (i.e., so as to conceal the part of that card that is not being used).
Under each box, there is the action subtype icon, i.e., a symbol showing the type of action, and any modifiers or changes applied to it.
There are 2 advanced Action cards per agent which show the agent's character transformed into its monstrous evolution: these cards are used in the same way as the basic Action cards, but they have more versatile or powerful icons. These cards will be used later in the campaign or in the Arcade mode.
Card anatomy
- A: Card name
- B: Special icon: this tells you if a card is LOCKED or a PATROL.
- C: Faction: the faction the card belongs to.
- D: Action boxes: during the High-rise phase, the actions in the boxes will be executed from top to bottom. If a box is red, the action will only be executed if the Alarm is ON.
- E: Trigger boxes: during play, trigger boxes can be activated by certain events. The most common is the "Reveal" box, activated after a Threat card has been revealed.
- F: Resolution: symbols needed in order to defeat the Threat card. If there is also a red Resolution box with the Alarm ON, you only need to consider the set of symbols in that box in order to defeat the card. A Threat card goes to the Loot pile if neutralized.
Remember: if the Alarm is ON and you defeat a card with a red Resolution box, the Alarm is turned OFF (see page 15 for Alarm behavior).
Factions
The factions are: Solace, Tech, Hostage, Merc, Wanderer, FTO.
Preparing to Play
If you are opening the box for the first time, and want to dive right into the game, follow these steps:
- Take the main deck of cards out of the box.
- Take all the Agent (both Token and Character) cards.
- Set aside the Room cards and Utility cards (Alarm, Random, Exit).
- Set aside the Time/Reinforcement cards.
- If you are going to play in Campaign mode, you are all set! Start reading the campaign booklet.
- If you want to try the Arcade mode, take all the cards from Pack 1, except the Unique cards and objectives, and add them to the rest of the High-rise cards in the box. Patrols are set aside as well, but will be used in the game.
- Subsequently, to reset and prepare to play in Campaign mode, re-assemble all the Pack 1 cards. Use the Pack 1 Reference card to understand which cards belong to this pack.
Play Area
The High-rise is the core of every mission: it consists of 5 stacks of High-rise cards, and every stack represents a floor of the complex (both in the rules and on the cards, the floors are indicated as: 1F, 2F, 3F, 4F, 5F). Agents proceed cautiously on the floors, dealing with Threats and rescuing hostages.
Behind every door there could be any danger lurking, and so agents have to be prepared for anything, or they can throw caution to the wind and blast their way through the complex. When the rules refer to a floor, they mean the stack of cards representing that floor, even if the stack has no more cards.
- A: The High-rise stacks, one per floor (1F to 5F).
- B: Agent Token cards, representing the agents, are always placed to the right of the floor stacks, and when they move between floors, they are placed next to the destination floor. High-rise cards can only be placed on top of a stack, or temporarily to the left of a stack after a movement.
- C: Below the first floor of the High-rise, there's the Alarm card, which tells you the Defcon level.
- D: The Random deck is placed to the right of the Alarm card, while the Time deck and the relative discard pile (in which there will be placed Reinforcements) are placed to the right of the Random deck.
- E: The Loot pile (initially empty) is set to the left of the Alarm card, where High-rise cards are placed once they have been dealt with.
- F: The Out of Action pile, under the Alarm card, is where you place High-rise cards that have been removed from play or Action cards that have been discarded as damage.
Setup
For every mission in the Campaign, there will be a specific setup to follow in order to prepare the High-rise. However, there are some steps that are common to every mission:
- Follow the mission setup in the Mission book in order to prepare the High-rise (for the Arcade mode, see the Arcade mode setup on page 29). The mission setup is divided into two parts, the High-rise deck composition (where the decks are built) and the High-rise setup (where the decks are used to set up the floors).
- Below 1F, place the correct Alarm card for the number of players (4+ or 3-). Named Defcon 4, it must have the blue side facing up; place the Defcon 3 card under it.
- Place the Random deck to the right of the Alarm card and shuffle it.
- Take 10 Time/Reinforcement cards (not including Sentry bot cards), shuffle them and place them face down to the right of the Random deck, forming the Time deck. Discarded Time cards are placed to the right of the Time deck, becoming the Reinforcement pile.
- If this is a Campaign mission, put all the objectives for the mission under the Objective cover card.
- Each player chooses 1 agent and takes all the cards relating to that agent:
- 6.1) Put the 2 advanced Action cards aside. These will be available in later missions.
- 6.2) Place your Agent Character card in front of you.
- 6.3) Take all of your agent's other Action cards (7) and arrange them in your hand.
- 6.4) Place your Agent Token card to the right of the floor from which the agent is to begin the mission. Generally, agents start on 1F but if you are playing with Sybill, you can choose whether to start on 1F or on 5F.
- Read the Mission briefing, telling you what the objectives and other conditions are.
Playing the Game
A mission of Solace consists of a variable number of turns, in which the players first plan and execute their actions, to which the Threats respond.
You can only play 1 Action card on each side of the Agent Character card (special effects aside). Action cards can always be turned face down so that a Move action can be planned.
Remember: if a player is in a situation where they cannot even place a single card, they are K.O.
Please note that, if your agent is disrupted, you can only play 1 card. See Disruption at page 21.
When a player has finished planning, they recover the used action cards from the previous turn that were set aside during the Action phase.
Furthermore, if the player's agent was DISRUPTED, flip their token card to the active side (see page 21 for Disruption).
Every turn is divided into 4 phases:
- Planning phase (players plan actions for the turn)
- Action phase (players execute the actions planned)
- High-rise phase (Threats respond, executing their actions)
- Defcon phase (new Threats are revealed and time passes)
Players can communicate and strategize (indeed, they are highly encouraged to do so) throughout the game as there's no hidden information. Action cards that have not been played should always be kept in your hand (and you can communicate freely what is available to you).
1. Planning phase
Agents plan their steps and how to neutralize targets.
In the Planning phase, players must choose 1 or 2 Action cards to be played. This/These are placed to the left and/or right of, and slightly under, the Agent Character card/s so as to conceal the unused action(s). Only the chosen actions need to be shown in order to be performed.
2. Action phase
Agents carefully clear floors. In the Action phase, players spend Action cards, following the symbols on them and executing actions. There's no fixed order of turns: players can cooperate by summing their symbols during actions and/or use both their own Action card symbols for the same action, but they cannot perform other types of action until they have completed the action they are executing.
Players then take turns executing actions, until they can't or don't want to perform any more. When every player agrees, the Action phase ends.
Example: Shiro has planned an Action card with 1 Hit and 1 Move, and another one in the other box consisting of 1 Help; Shiro could either move first and then use the Hit to neutralize a Threat, or the other way around; the important thing is to use the Action card entirely.
If he instead chooses to Move first, and then use the Help on the other Action card, the Hit can no longer be used.
After a player has used an Action card, it must be set aside to remind them that it has been played for this phase. Cards set aside in this way will be recovered at the end of the next Planning phase.
Agents have to plan their actions without using the action cards that were used in the previous turn, but they will get them back in their hand at the end of this Planning phase.
Action types
Movement. This is the most important action type of the game, because it allows agents to search the building for objectives or hostages. Movement icons allow agents to move as follows:
- Between floors: to an adjacent floor (up or down).
- Around a floor: there are two cases:
- If the top card of the floor the agent is on is face down, first reveal it. Then, choose whether to leave the card face up at the top of the floor or place it face up at the bottom of the floor.
- If the top card of the floor you are on is already revealed, using the movement to place it at the bottom of the floor, still face up.
If a card has the LOCKED icon in the top right-hand corner, this means it cannot be placed under the floor, as a result of any movement or any special effect, but can only be resolved. Remember: revealing and placing a card under the floor counts as just 1 Movement.
Example: Aria is on 1F, and she wants to help Tora (who is on 2F) find and rescue some hostages. She planned a double Movement card in the right box and a Help card in the left one. She starts the movement, using one of the symbols to move from 1F to 2F (reaching Tora). She uses her second movement to reveal the first card on 1F. It's a Soldier, not the hostage they were searching for, so Aria chooses to place the Soldier card revealed through the movement under the stack.
Tora has planned another double Movement, which he begins by revealing another card on 1F, this time a Laser trap: tough luck, because that card is locked and cannot be placed under the stack through movements or effects. Tora could use the remaining movement to move away from this floor, but that would leave Aria facing the consequences of the Laser trap alone during the High-rise phase, when the card's action boxes will be triggered.
Reveal trigger. If a card you have revealed in order to move around the floor has the "Reveal trigger" symbol on its right side, it executes the action shown in the trigger box. High-rise cards already revealed can no longer use the "Reveal" trigger box/symbol. This also applies to any card that is already face up.
Resolution. With these symbols, agents can defeat High-rise cards by removing them from the floor they are on and placing them on the Loot pile. To do so, one or more agents must play symbols on Action cards matching the symbols shown in the Resolution box. Any symbols not used when neutralizing a Threat can be carried over to other Threats on the same floor. When a Threat is eliminated, players remove the card from the floor and put it on the Loot pile.
Sometimes the Resolution box has more than one set of symbols, divided by a slash /: in that case, players choose the set they want to try to match in order to defeat the card. Other times, Resolution boxes contain an arrow >, meaning that successful resolution will trigger another action that will have to be executed before the card can be placed on the Loot pile.
Example: A Core Walker has a Resolution made up of 2 Hits. Tora and Shiro, in the Planning phase, planned one Action card with 1 Hit and another with 1 Hit. Both agents need to be on the same floor as the Threat to interact with it. They combine their symbols to neutralize the Threat, which goes to the Loot pile. The Action cards used by both agents are then set aside.
Example: Aria rescues a Citizen, using a Help symbol. After its card has gone to the Loot pile, the Citizen provides the agents with 2 Hacking symbols, to be used immediately.
Some advanced High-rise cards, to be resolved, might require Hacking and/or Movement symbols. If you use these symbols to resolve a card, they cannot be used for their intended action.
Hacking. With this action agents can choose any floor and reveal as many cards, from the top of any floor stack, as there are symbols played. This action does not activate Reveal trigger boxes. After you have revealed the cards, put them in the same order and state (face up or face down) as they were before the Hacking action.
When Hacking, you cannot combine Hacking symbols from different action boxes (even of the same agent). Hacking symbols can be required for a Resolution. In that case, symbols can be combined but they need to be provided by agents on the same floor as the Threat.
Evade. With this action, agents move cautiously and can protect themselves or other agents: after the Planning phase and at the beginning of the Action phase, use all Action cards charged with Evade and rotate the Agent Token cards 90° degrees clockwise for every Evade used. Whenever an agent is under attack by a Threat (be it due to a Reveal trigger or during the High-rise phase), an agent with an Evade-charged Action card can spend it, rotating the Agent Token card back (i.e., counterclockwise) to avoid the full effect of the attack. Remember that in order to avoid multiple attacks, more Evade charges are needed.
Example: Shiro is checking the 5F alone, trying to find the objective. He planned an Evade in the left box and a double Movement in the right one. At the beginning of the Action phase, he rotates his Agent Token card clockwise by 90° degrees to show that he has an Evade charge. Then, with the first Movement, he reveals the top card on the floor, a Turret C.16: this card has a trigger action box that immediately deals 1 Hit. Shiro chooses to spend the Evade charge, rotating his character card counterclockwise to avoid the Hit, and places the Turret under the stack, as part of the movement, because he doesn't want to deal with it.
He uses the second Movement, revealing another card, an Infiltrator. This Threat could deal him 2 Hits, and having no more Evade charges, he'd suffer those 2 Hits. Luckily, the Infiltrator has no Locked symbol, so, as part of the movement, Shiro decides to place it under the stack.
Alarm and red Resolution boxes
If the Alarm is ON and a card has a red Resolution box, you must ignore the blue Resolution box and match the set of symbols contained in the red box in order to defeat it: if you do, this will turn off the Alarm. Use this option to your advantage.
You can safely ignore the red Resolution box when the Alarm is OFF.
Agents' powers
From Mission 2, or when playing in Arcade mode, agents start each mission with a one-use power on their Agent board. This power can be used as if it were an action: after using it, the Agent Character card is turned over to show the used side.
Other symbols and specific agent symbols
These symbols are present on some action cards.
- GUN ATTACK: Some Resolutions need Gun attacks, while others are resistant to Gun attacks.
- ONLY ON THIS FLOOR: This is a limitation to the current action. Most of the time it's a subtype of a "hacking" action, limiting that action to the floor the agent is currently on.
- TORA - MOVE OTHER AGENTS: This is a Movement point that can be given to other players. It can only be used where you can combine Movement symbols.
- TORA - HACKING THEN ELECTRIC HIT: After the Hacking you can try to defeat one of the Threats hacked with an Electric Hit.
- SYBILL - NO REVEAL TRIGGER: For the entire phase, Sybill doesn't trigger Reveal action boxes when moving.
- SYBILL - RANGED GUN ATTACK: Sybill can also use the 2 HITs on this card on the floor above or below.
- SYBILL - WILDCARD: This could be any symbol. The player can choose whatever symbol they see fit.
- SHIRO - DAMAGE: After using the symbols on this card, discard the card as damage. It can be healed.
- SHIRO - NEUTRALIZE: Neutralize a card, ignoring its Resolution box. CANNOT BE USED ON UNIQUE CARD (CARDS WITH UNDERLINED TITLE).
- ARIA - HACKING THEN HELP: After the Hacking you can try to rescue one of the hostages hacked with 2 Help.
3. High-rise phase
Threats respond to the raiding agents.
In the High-rise phase, High-rise cards are activated against agents. Starting from 5F and proceeding downwards to each other floor, check whether there are any face-up cards in the stack: if there are, activate their action boxes from top to bottom.
Only one card per floor can be activated in this phase, and each card can be activated only once.
Some action boxes of enemy cards have a red background; execute those actions only if the Alarm is ON, otherwise ignore them.
If, during the execution of an action box, a High-rise card is removed from play (because it has to be discarded or it is moved to the bottom of a floor), complete all the actions in that action box and ignore those in the other boxes.
Example: Core Walker is activated during the High-rise phase. If the alarm is ON, the player must execute all three action boxes. If it's OFF, execute only the blue boxes.
Threat actions
Listed here are all the actions and conditions shown in the action boxes. You don't need to learn them: just consult this list whenever a new Threat is revealed and you want to check what an icon means.
- DISCARD: Remove this card from the game. Put the card on the Out of Action pile (not on the Loot pile). Remember to execute all the symbols in the action box where the DISCARD symbol appears, but do not execute the other action boxes below that.
- PUT AT BOTTOM: Place this card, face up, at the bottom of the deck.
- REVEAL: Reveal the top card of the floor pile. If this icon is followed by a specific floor, reveal the top card of that floor.
- MOVE TO AGENT: Move this card 1 step towards the nearest agent. If there are 2 or more agents located at the same distance away, move to the floor where there are more agents; if the number of the agents on both floors is the same, move to the next floor up.
- MOVE TO ... FLOOR: Move this card 1 step toward the TOP FLOOR or the FIRST FLOOR.
- MOVE TO RANDOM FLOOR: Move this card according to a card drawn from the Random deck.
- NO AGENT HERE: This icon means: "if there are no agents on this floor". It is always followed by a consequence, which should be enacted only if the condition is true.
- AGENT HERE: This icon means: "if there are agents on this floor". It is always followed by a consequence, which should be enacted only if the condition is true.
- HIT!: This is an attack directed at an agent present on the floor; if there is more than one agent present, players can choose who will suffer the attack. The relevant player will have to discard randomly, from their hand, a number of cards equal to the damage suffered. An entire attack can be avoided by a single Evade charge.
- DISRUPT: This is an attack that temporarily hinders an agent. Like HIT!, it is directed at the agents that are present on the floor, and players can choose who will suffer the attack. A DISRUPT can be avoided in the same way as a HIT! can. Instead of suffering damage, the player whose agent is victim of the DISRUPT has to turn over that agent's Agent Token card. The DISRUPT effect lasts only one turn. An agent can only be DISRUPTED once, after which they cannot be targeted again. However, further DISRUPTS can target other agents.
- HIGH-RISE: This icon indicates High-rise cards.
- CONSEQUENCE: This icon is always followed by other icons. If there's a condition before the arrow, and that condition is present, the rest of the icons must be executed. If the condition is in a Resolution box, after the Resolution execute the actions.
Trigger icons
These are the icons that can be found in trigger boxes, with the corresponding reactions.
- REVEAL: when the card is revealed (turned face up), execute the action(s) indicated.
- DEPLOY: when entering play from outside, execute the action(s) indicated. If they consist of deployment instructions, follow them (i.e. Reinforcements).
- ENTER FLOOR: when any agent enters this floor, execute the action(s) indicated. Repeat whenever an agent enters the floor.
Special icons
- LOCK: You can't move this card under the stack in any way.
- PATROL: Same as Lock, but this card is also a Patrol - it follows special setup rules.
Threat movement
When Threats move, don't put them immediately on top of the floor. Instead, first place them to the left of the stack they are moving to (then, if other Threats arrive on the same floor, move them further left). In this way, other revealed Threats on the floor the cards are moving to could also be activated.
At the end of the High-rise phase, put them one at a time on top of the floor, starting with the first on the right and proceeding leftwards.
Example: When the High-rise phase starts, there are only 2 High-rise cards visible, Infiltrator on 3F and Citizen on 2F. Starting from the top, players need to execute all the action boxes on the revealed cards. Since there are no revealed cards on 5F or 4F, we start from 3F. The first box tells you to move Infiltrator one floor towards the nearest agent, which in this case is Shiro, on 2F. The Infiltrator moves to 2F, but isn't immediately placed on top of 2F: it is placed to the left of the High-rise where it remains until all the cards have been activated. The activation then continues, with the Infiltrator dealing 2 Hits to Shiro. The red box with the Deploy effect is activated only if the Alarm is ON. Next, Citizen is activated, because Infiltrator has already been activated on 3F, and we need to activate every card on every floor. The first red action box is ignored, because the Alarm is OFF, and the second box tells you to put Citizen at the bottom of the floor (under the stack), and reveal the top card on it. If there were other action boxes after that one, we'd ignore them. The new revealed card could trigger only Reveal boxes and doesn't activate any other action boxes. At the end of the High-rise phase, move the Infiltrator on top of 2F.
Threat movement recap
- Threats move toward the nearest agent.
- If two agents are equidistant, threats move toward the group with more agents.
- If there's still a tie, threats move to the higher floor.
- Put them temporarily on the left of the floor. At the end of the High-Rise phase, put them on top of the floor.
Damage and Disrupt
When HIT! and DISRUPT are not Evaded, agents suffer the consequences. For every HIT!, an Action card must be randomly discarded from the player hand. Cards discarded this way are placed in the Out of Action pile, under the Defcon card. When an agent HEALS, the player can recover a card of their choice from that pile.
When an agent is DISRUPTED, their Agent Token card is flipped (turned face down), revealing their disrupted artwork. During the next Planning phase, disrupted agents can plan only 1 card. When they have finished planning, they recover, as usual, their Action cards that had previously been set aside and flip the Agent Token card face up.
If an Agent can't plan even 1 card during the Planning phase, they are K.O. and are out of the game until the exit from the High-rise. Other agents can use the K.O. agent's Agent Token card as an Action card, effectively blocking one of their action boxes, in order to move the agent between floors and to the exit. Place the Agent Token card on the relevant floor at the end of every Action phase.
Deployment Types
When a Threat enters play (mostly, Reinforcements and Unique cards), there will be a box in the right-hand row containing this icon. Usually, it will be an instruction as to the floor on which to deploy the card. If there are other icons in the deployment box, execute them as well after the card has entered play.
- DEPLOY ON FLOOR: Deploy the card on the floor shown (in the example, 1F).
- DEPLOY ON AGENTS: Deploy the card on the floor where there are multiple agents. In the event of a tie (same numbers of agents), deploy the card on the higher or highest floor.
- DEPLOY ON A RANDOM FLOOR: Draw a Random card and deploy it on the floor shown.
Threats and targeting agents
If Threats need to be deployed or move towards the nearest agent, and you have any doubt about how to proceed, follow these rules:
- If there are two groups of agents located at the same distance, move towards the largest one.
- If you need to Deploy on Agents, always choose the floor with the largest group of agents.
- In either case, in the event of a tie, target the group of agents located higher in the High-rise.
4. Defcon phase
The complex reacts to the agent raids, sending more reinforcements.
The final phase, the Defcon phase, changes depending on what DEFCON level the High-rise is in. Look at the current Alarm card and follow the Action boxes from top to bottom, like a Threat card. The rows are printed with symbols only; each row is transcribed here in printed order, with the symbol described in brackets:
- [check mark with arrows] Starting from the top floor and proceeding downwards, reveal the top card on each floor where there are at least 2 agents.
- [4 with person icon] 4+ players.
- [question mark] Reveal the top card on a random floor.
- [check mark with arrows] Starting from the top floor and proceeding downwards, reveal the top card on each floor where there is at least 1 agent.
- [card with stacked lines] Starting from the top floor and proceeding downwards, reveal the top card on each floor.
- [red 1] Deploy a Reinforcement from the Reinforcement pile.
- [hourglass] Place the card on top of the Time deck in the Reinforcement pile.
Finally, remove any Evade charges from any agents, before starting a new turn and a new planning phase.
Play proceeds until agents exit the High-rise or the mission fails.
Objective cards (Campaign only)
Objective cards tell players what they need to do in order to progress in the mission. At the beginning of the mission, after the briefing, the mission setup should tell the players what objectives are still open. When an objective is reached, players need to read the relative cutscene in the Campaign book.
Remember: at the end of the cutscene, there may be consequences or new Objectives to be revealed.
Exit the High-rise
When an objective tells the players to exit the High-rise, take the Exit card (flipping the Objective cover card) and put it beside the floor indicated on the objective or, in the case of a random floor, draw the first Random card to designate it. In order to proceed to the Mission debriefing, all agents (even if K.O.) need to exit the High-rise through the Exit, spending 1 Movement on that floor. If an agent is K.O., another agent, carrying them, can spend 1 Movement and the two agents can leave together.
Random cards
Whenever you need to choose a random direction or floor (mostly in response to action boxes on Threats), players need to draw the top card of the Random deck and follow the instructions. Then, do not shuffle, simply put the card face down underneath the Random deck.
Mission outcome
If the players have completed all the objectives and successfully left the High-rise, it's time to evaluate the outcome.
Using the score table at the end of the Mission debriefing in the Campaign book, tally up the score. If the score is positive, the mission is successful, and you can proceed to the next one. If the score is 0 or negative, you failed the mission… but it was only a virtual training simulation.
If you failed, try the mission again, but this time replace 2 random Time cards with 2 Sentry bots.
Most of the score comes from saving hostages: it's imperative that agents save most of the hostages in the building, because points will be deducted for every hostage left behind or killed.
Remember that the mission fails immediately:
- If you need to take a card from the Time deck but there are none left
- At the end of the mission, there are one or more K.O. agent left in the High-rise
If you want to know how well you did, compare your score with the table below:
| Mission failed | Partial | Success | Flawless |
|---|---|---|---|
| 0 or less | 1-2 | 3-4 | 5 or more |
Between missions
After a mission, take all the Unique cards (those with the title underlined, see page 6) and put them back in their pack — they will not be used in the next missions. Rooms and Patrol cards should also be set aside. The rest of the High-rise cards, even the ones introduced by the open packs, will be used in the following missions.
Example: After Mission 1, take DATA SKJ35 and Bodyguard/Hacker and put them back into Pack 1. All other cards should be stored and used in the next mission.
Agent progression
Agents will gain new cards and powers between missions. They start with only the 7 Action cards and no special powers: at the start of a mission, the booklet will tell you what powers or cards to add to your pool. For Arcade mode, the power level tells you what cards and powers to use.
Difficulty
If you find the game particularly challenging or easy, you can adjust the level of difficulty, even during the Campaign:
- Easier: During setup, replace 1 Time card with a Sentry Bot (you can do this multiple times).
- Easier still: During setup, add 1 Sentry Bot to the Time deck (you can do this multiple times).
- Harder: During setup, add 1 High-rise card to every floor from the pool of cards not included, before adding Patrols.
- Harder still: Remove 1 Action card from every agent before playing.
- Even harder: After setup, move the card at the top of the Time deck to the Reinforcement pile (you can do this multiple times).
Solo mode
Solace can also be played by a single player, and there are multiple ways to do this:
Full team
You will fully control all the agents.
Choose how many agents you want to include in the game, and setup every mission with that number of agents in mind.
You'll plan and execute the actions of every agent in play by yourself. There's no change in the gameplay.
This mode is really challenging because of the considerable cognitive load. If you nevertheless find you are comfortable with it, we recommend you increase the difficulty (see previous chapter "Difficulty").
Leader mode
You will control one leader and one wingman.
Choose your leader agent and your wingman agent. The other two agents will not be used.
Set up as for 2 players, and set up your leader in the usual way. Take the Leader card as well in hand.
For your wingman, set up their action cards and powers as per mission, but instead of keeping all the wingman's action cards in your hand, shuffle them and put them face down, next to the Agent Character card. This will be referred to as the Wingman deck.
Take the wingman card, and put it on the character sheet.
At the start of every planning phase, draw 2 cards from the Wingman deck.
For your leader, you'll plan actions as usual. Plan your leader as usual with their action cards, and instead plan the wingman actions with the wingman cards that you drew. In Leader mode, you can plan an additional 3rd slot using the Leader card, which could be used by both agents.
The Leader card is automatically put back in your hand at the end of every Action phase.
Instead, put the used wingman cards in a discard pile near the Wingman deck, and shuffle it to form a new deck every time you need to draw cards but can't. You can use the wingman power as you see fit.
When taking damage for the wingman, for every damage draw the top card of the Wingman deck, and put it in the Out of Action pile. If you heal the wingman, take 1 card of your choice from the Out of Action pile and put it under the Wingman deck.
Arcade mode
The Arcade mode is a single mission where players try to achieve the highest score possible. There is no real difference during play between Campaign missions and Arcade missions, apart from the setup and objectives.
First, choose the power level for your agents:
- Basic: use all basic Action cards, your signature Action card and the character sheet power.
- Advanced: use all of the above, plus the 2 advanced Action cards.
Note: where the printed page shows a player-count value as a small icon, the values are transcribed in printed order as 4 players / 3 players / 2 players.
Arcade setup
- If you didn't play any missions from the Campaign, take all the High-rise cards from Pack 1, apart from the unique cards (those with an underscored title).
- If you have already played some of the missions, or the entire Campaign, use all the cards that you have already used (apart from unique cards).
Arcade High-rise deck composition
- From the card pool, take at least X hostages, where X is the number of agents.
- Shuffle, then add 34 / 25 / 16 cards (4 players / 3 players / 2 players).
- Then, add 2 Room cards at random.
- Finally, if you are playing with the Advanced power level, add 10 more cards.
Arcade High-rise setup
- Remember, when drawing cards from the High-rise deck, do not reveal them.
- Deal 8 / 6 / 4 cards on every floor, face down (4 players / 3 players / 2 players). If playing at the Advanced power level, add 2 more cards on every floor.
- Shuffle all the Patrols, then draw 3 / 2 / 1 (4 players / 3 players / 2 players). Random cards: add one Patrol at random on the floors that were drawn. Then shuffle the Random deck.
Arcade objectives
- There are no fixed objectives in Arcade mode: the main goal is to save as many hostages as possible before the Time is up.
- Follow the same mission outcome procedure, but use this table to calculate your score:
| Score modifier | Condition |
|---|---|
| +1 | for each hostage rescued |
| -1 | for each hostage left behind |
| -2 | for each hostage killed |
| +1 | no Alarm at the end of the mission |
| +1 | for every 6 cards in the Loot pile |
| -4 | 4 players |
| -2 | 3 players |
| 0 | 2 players |
Achievement list
Mission 1
- Silent and deadly - Don't trigger the alarm until Hacker is revealed
- Without a scratch - Exit from the building without any damage
- Coordinated attack - Neutralize all the patrols on the first turn
- Target secured - Save 2 Nurses
- Killer - Neutralize 3xAgents or more enemies
- Butcher - Neutralize 5 enemies on the same turn
- Sweeper - Neutralize Bodyguard/Hacker on the same turn
- Fast - Finish the mission with 2 or more cards in the Time deck
- Saviour - Rescue all hostages
- Injured - Let an agent have only 1 card in hand
- Left behind - The agent with the data leave the building last
- Loud - Let the alarm turn on 3 times
- Leveler - Fully clear a floor
- Black Hole - Fully clear 3 floors
- Turret smasher - Neutralize 3 turrets on the same turn
- Distant killer - Neutralize an enemy on floor where there are no agents
Mission 2A
- Silent and deadly - Don't trigger the alarm
- Without a scratch - Exit from the building without any damage
- Coordinated attack - Neutralize all the patrols on the first turn
- Target secured - Rescue 2 Employees
- Blood Money - Neutralize 3 mercenaries
- Paramedic - Rescue Shin Tendo and exit the building on the same turn
- Ambulance man - Rescue Shin Tendo before the 4th turn
Mission 2B
- Silent and deadly - Don't trigger the alarm
- Without a scratch - Exit from the building without any damage
- Coordinated attack - Neutralize all the patrols on the first turn
- Target secured - Rescue 2 Employees
- Flash shot - Neutralize Warden MK3 on the same turn it is revealed
- Target hidden - Reveal Server cluster as the last card of a deck
Mission 3A
- Silent and deadly - Don't trigger the alarm
- Without a scratch - Exit from the building without any damage
- Coordinated attack - Neutralize all the patrols on the first turn
- Target secured - Rescue Scientist and Lead Scientist
- Heaven calls - Neutralize A.N.G.37
- Containment - Find Containment room in the first 2 turns
Mission 3B
- Silent and deadly - Don't trigger the alarm
- Without a scratch - Exit from the building without any damage
- Coordinated attack - Neutralize all the patrols on the first turn
- Target secured - Rescue Scientist and Lead Scientist
- Heaven calls - Neutralize A.N.G.37
- Surveillance - Find Surveillance room in the first 2 turns
Mission 4A
- Silent and deadly - Don't trigger the alarm
- Without a scratch - Exit from the building without any damage
- Coordinated attack - Neutralize all the patrols on the first turn
- Target secured - Rescue 2 F.T.O. Members
Mission 4B
- Silent and deadly - Don't trigger the alarm
- Without a scratch - Exit from the building without any damage
- Coordinated attack - Neutralize all the patrols on the first turn
- Target secured - Rescue 2 F.T.O. Members
Mission 5
- Silent and deadly - Don't trigger the alarm
- Without a scratch - Exit from the building without any damage
- Target secured - Rescue 2 Diplomats
- Scorched Earth - At the end of the mission, there is no more than 1 card on every floor
Arcade mode
- Silent and deadly - Don't trigger the alarm
- Without a scratch - Exit from the building without any damage
- Coordinated attack - Neutralize all the patrols on the first turn
- Flawless - Rescue all the hostages in the High-rise
Example of play
Aria, Shiro and Tora are in the High-rise, trying to save as many hostages as possible. Aria and Tora are on 2F, while Shiro is on 3F. For this turn, Aria planned a Movement and an Electric Hit, Shiro planned an Evade and an Electric Hit and Tora planned a double Movement and a Help.
At the beginning of the Action phase, Shiro rotates his Agent Token card to charge an Evade. Then, they start executing the actions planned. They decide that Aria should go first, using her Movement to move up to 3F (discarding the Action card). Then, Shiro uses his Electric Hit, in conjunction with Aria's Electric Hit, to neutralize Core Walker whose card goes in the Loot pile, and both Aria and Shiro discard their Action cards relating to that attack.
Tora first uses his double Movement cards, revealing the first one on 2F. Unfortunately, it's a Turret C.16, that, when revealed, inflicts a Hit. Tora has no Evade charges, and suffers 1 Damage, discarding one card at random from his hand. Note that, if Aria hadn't moved before this action, she could have covered for Tora and taken the damage herself instead.
As part of the Movement, Tora can choose to move this card, just revealed, to the bottom of the floor, placing it face up, and decides to do so. He then uses his second movement to move again on the floor, revealing another card, a Citizen. This time, he decides to leave the card where it is, because he can rescue the hostage with his action cards. He discards the double Movement cards, having used all the symbols.
Then, he uses his Help card to rescue the hostage. Citizen goes to the Loot pile, and lets Tora immediately hack a floor with 2 Hacking symbols. After that, Tora discards the action card Help.
Then, the Infiltrator deals a double Hit attack. Every agent on the floor can choose to be the target of the attack, and Shiro decides to do so. But instead of taking 2 damages, he spends his Evade charge, rotating his Agent Token card back and avoiding the entire attack. The third action of the Infiltrator is ignored because the Alarm is off.
The next revealed card in the High-rise is another Citizen on 1F. The first action is fortunately ignored because the Alarm is off, but the second action is executed, moving the Citizen to the bottom of the floor and revealing the first card on the floor. It's a Guard, but fortunately only 1 card per floor is being activated in this phase, so this card can be dealt with in the next turn.
All the agents decide to proceed to the High-rise phase, because they have used all their planned cards and do not want to use their powers.
In the High-rise phase, every revealed card in the High-rise is activated, from top to bottom. In this situation, the first revealed card, from the top, is Infiltrator, on 4F. Its first action is to move one floor closer to agents, and since the nearest group of agents is on 3F, it moves there. If the nearest group had been on 2F, for example, the Infiltrator would only have been able to move by one floor, stopping at 3F. It stays, temporarily, to the left of the High-rise, until the end of the High-rise phase.
They should then reveal the first card on 3F because there are 2+ agents on that floor, but since there's already another revealed card there, this action is ignored.
Finally, the top card of the Time deck is discarded into the Reinforcement pile, and a new turn can begin.
Agents have to plan their actions without using the action cards that were used in the previous turn, but they will get them back in their hand at the end of this Planning phase.
After checking every floor, agents move to Defcon phase, but first remember to put every High-rise card that has moved to the left of the building on top of its respective floor (see Threat Movement).
Icons Recap
The printed recap lists each icon by its name (the icon itself is shown on the page image):
- Put at bottom
- Reveal
- Move to agent
- Move to ... Floor
- Move to random floor
- No agent here
- Agent here
- Discard
- Reinforcement
- Alarm on
- Alarm off
- Time passes
- More time
- Hit!
- Disrupt
- High-rise
- Gun attack
- Only on this floor
- Consequence
- Flip
- Heal
- VIP
- Ranged hit
- Reveal from other floor
- Reveal above and below floor
- Hit every agent
- Reveal (trigger)
- Deploy
- Enter floor
- Lock
- Patrol
- Tora - Move other agents