Small Army: Tank Wars
Small Army: Tank Wars Rulebook
Table of Contents
Table of Contents
Components
- Board: 2 pieces
- Armor tokens: 12 pcs.
- Command tokens: 8 pcs.
- Radio tokens: 6 pcs.
- Gunfire tokens: 6 pcs.
- Support cards: 12 pcs.
- Dice: 2 pcs. (one with the numbers 1-6; the other with the letters A-F)
- Vehicle cards: 6 pcs.
- Support tokens: 10 pcs.
- Artillery tokens: 36 pcs.
Preparing to Play
Preparation of the components. Each player receives:
- their own board
- a set of Vehicle Cards (according to the chosen side of the conflict, which will constitute their army) and adequate models
- 3 Gunfire tokens
- 6 Armor tokens
- 4 Command tokens
- 3 Radio tokens
The other tokens (Artillery tokens and Support tokens) should be placed in a place accessible to both players so that they can use them freely.
The board. Each player places the vehicles on their board in any way they wish, on the fields of their choice.
Armor tokens. The armor tokens must be placed in the indicated place on the vehicle cards. Each of them represents one hit point of a given vehicle, i.e. the number of hits a given vehicle can take before it is destroyed.
Support Cards. The last element of the preparation is to carefully shuffle the Support Cards and place them next to each other so that each player can comfortably reach for them if needed. The cards prepared this way are called the Support Deck. Each player first draws 1 card from the top of the Support Deck, with which they start the game.
Once the preparations are complete, the game can begin.
Arrangement of cards on the board. On the board, next to the playing field, there are 3 places to place vehicle cards. Their deployment will determine the order in which they will make their movements. The vehicle with the card in the first position from the top shall be the first to move, then the vehicle with the card in the middle position, and the last to move shall be the vehicle with the card in the bottom position.
The Course of the Game
The game is played in a set order:
- Artillery fire
- Movement planning
- Gunfire planning
- Execution of Movement
- Gunfire
- Supply Drop
In each of the above phases, one player makes their moves first, then the other makes theirs. When both of them have completed their movements in a given phase they can proceed to the next one.
Artillery Fire
In this phase, artillery vehicles from each side fire at the enemy's board. Each artillery vehicle can make as many shots in one phase as the number of shells it has available — this is determined by the number of shells they have at their disposal. E.g.: a vehicle with 4 Artillery Fire marks can make 4 shots in one phase.
The shooting is carried out by means of a dice throw: the first one determines the column, the second the row number. Depending on the result of the dice throw, the shell will fall on the field at the intersection of the specified column and row. For example, if the result "E" and "4" is thrown with the dice, it means that the shell will fall onto field E4.
If the artillery fire hits a field with a Support token on it, no Artillery token is placed on it, but the Support token is removed from the board. If artillery fire hits a vehicle, this is considered a normal hit and the vehicle loses 1 point of armor.
Shots are fired by both sides at the same time, which means that an artillery vehicle can complete all its shots, even if it was destroyed by the enemy in the same phase. It is then treated as destroyed only at the end of the artillery fire phase.
If a player starts the artillery firing phase without an artillery vehicle, they are entitled to 1 artillery shot from the Long Range Artillery. It works exactly like an ordinary artillery shot.
Movement Planning
In this phase, each player must plan the movement of their vehicles. This is done with the help of the Command tokens. There are arrows on the Command tokens that indicate the direction of the planned movement and the value (the numbers "1" or "2") indicating the number of fields on the board that the vehicle will travel in a given move.
Each player has their own set of tokens to plan their vehicle movement. There are 4 different command tokens included:
- Moving straight by 1 field.
- Moving straight by 2 fields.
- Moving diagonally by 1 field.
- Moving diagonally by 2 fields.
To plan the move, select one of the Command tokens according to the movement pattern of the selected vehicle and place it in the command area so that the arrow on it indicates the direction in which you want to move the vehicle. Remember that commands are planned in a secret manner and the enemy should not see them.
Radio tokens are used to cover up the real command token, thanks to which the opponent will not see what command we put on the chosen vehicle. We cover the Command token with a Radio token and place the set prepared in such a way on the Vehicle Card for which the command is intended.
Remember: the Command token should be placed on the Vehicle Card so that the arrow on it indicates the direction in which the vehicle is to move.
If the Command token is not in accordance with the movement pattern of the vehicle (i.e. the arrow on the token indicates a move that the vehicle cannot make), the vehicle remains stationary and cannot leave the occupied field. This also applies to the range of motion that is on the token. If the vehicle is damaged (it has only 1 armor point left) and receives a command to move by 2 fields, it cannot execute such a command either.
Gunfire Planning
If both players have already planned their moves and each of the vehicles has already been given with a Movement Command, you should proceed to the next phase of the game, i.e. Gunfire Planning.
Each player has Gunfire tokens, the number of which is determined by the Vehicle Cards. At the beginning of the game it is 3 tokens. However, the loss of any of the vehicles with the Gunfire symbol will reduce the amount of these tokens by the amount consistent with the number of symbols on the lost vehicle card.
In the Gunfire Planning phase, each player places the Gunfire tokens on the enemy's board, trying to predict to which fields the opponent's vehicles will move.
You can also use the Gunfire tokens to remove Artillery tokens from your own board (see: Firing).
Movement
When both players have completed their Gunfire Planning phases, the Movement phase begins. Each vehicle, starting with the one whose card is in the topmost position, reveals the command that was given to it. This is done by removing the Radio token.
Once the command is known, you move the vehicle model on the board according to the given command, taking into account the direction of movement indicated by the arrow on the given command and the number of fields, which is determined by the value on the Command token.
Commands are executed in a certain order. The vehicle whose Vehicle Card is placed in the first position (the topmost position on the board) is the first to move, the next to move is the vehicle from the second position (the middle position on the board), and the last to execute the command is the vehicle placed in the last, bottom position on the board.
If the vehicle crosses or stops in a field where an Artillery token is located during movement, it immediately loses 1 Armor Point. In this case, 1 armor token should be removed from the vehicle card and the Artillery token should be removed from the field where the vehicle is currently located. The vehicle loses an Armor Point for every Artillery token it crosses. If, in the course of movement, it drove through one Artillery token and stopped on a field where a subsequent Artillery token is located, it loses a total of 2 Armor Points, and the Artillery tokens are removed from the field it drove through and from the field where it stopped.
A vehicle cannot stop in a field occupied by another vehicle. If a command given would mean that a field already occupied by another vehicle has to be occupied, the whole command is cancelled and the vehicle has to remain in place.
If a vehicle completes its movement on a field containing a Support Token, the Support Token is immediately removed and the player has the right to draw 1 Support Card.
The Movement Phase ends when both players make their moves with all vehicles.
Gunfire
If both players have made moves with all the vehicles they have, the previously Gunfire shot is resolved. If a vehicle has completed its movement on a field where the Gunfire token is located, the vehicle loses 1 Armor Point. All other Gunfire tokens that have not hit any vehicle are removed from the board. However, if a Gunfire token was placed on an Artillery or Support token, they are removed together with the Gunfire tokens.
Supply Drop
When the Gunfire phase is completed, the Supply Drop phase follows. It consists in drawing the field onto which the planes will make the drop.
The supply drop is carried out by means of a dice throw: the first one determines the column, the second the row number. The supply box will land on the field at the intersection of the column and the row. For example, if the result "B" and "3" is thrown with the dice, it means that the supply will land on field B3.
If the supply falls directly on a vehicle, it is immediately taken over by the crew. You should then remove such a Support token from the board and draw another Support card immediately.
If a Support token goes to a field where an Artillery token is located, it gets damaged. You should remove that Support token together with the Artillery token it fell on.
Support Cards
Each time a player's vehicle occupies a field with a Support token, that player should immediately draw 1 card from the Support cards deck. Each of the cards contains symbols which determine the possible actions; the number of symbols determines the number of actions.
For example: if there is 1 "Vehicle Repairs" symbol on the card, after playing this card the player can restore (repair) 1 armor token in any damaged vehicle. If the card contains 2 such symbols, they can perform such an action twice, i.e. indicate a vehicle and repair 1 point of armor in it 2 times.
Support cards can be played at any time, but they must be played before the subsequent phase of the game begins. Otherwise, the card will not work and its effect cannot be resolved in a given phase.
Explanation of Individual Symbols
Meaning of the individual symbols:
- Reports intercepted: at the beginning of the Movement Planning phase (before any command is given to the vehicles) select one of your opponent's Command tokens and put it aside. He cannot use that command in this round.
- Artillery observer: take a single artillery shot, but instead of the usual procedure, take one die and set the score on it according to your decision, then throw the other die. Treat the result on both dice as if it had been achieved in a normal throw.
- Communication interference: select an opponent's vehicle that is scheduled to move, and then re-align its command token in any way (by 90º, 180º or 270º). However, you are not allowed to look under the Radio token to see what exact command was given.
- Artillery fire: make a single artillery shot, consistent with the rules of artillery fire.
- Vehicle repair: select your own damaged vehicle and restore the lost 1 point of armor.
Victory
The player who is the first to eliminate all the enemy's vehicles wins the game.