Road Cycling Tour
Road Cycling Tour Rulebook
Table of Contents
Table of Contents
Preparation
Print out (full colour!) the file RCT_components. Stick the printed sheets to some sturdy cardboard and cut out the track tiles and counters (thin black lines are cutting lines).
Print out one RCT_team_sheet for each player.
Create (up to) five coloured and numbered rider tokens for each player. You can cut out and fold the triangular rider emblems in RCT_money&riders, but you can also make your own versions. The prototype had riders looking like this:
[Image of a triangular rider emblem showing the number 4 and a bicycle, omitted.]
Besides the components in the files, you'll need two dice. Unfortunately these aren't normal dice so you'll need to do some handy work. Both dice are D6s and should have the numbers 0, 1, 1, 2, 2, and 3 on the different sides.
Components notes
Terrain — there are four types of terrain: plain (light green); up-hill (light grey); down-hill (dark green); cobblestones (dark grey).
Speed counters are used to determine the speed of a rider in addition to or instead of the dice.
[Images of a normal speed counter (2, P2) and an extra speed counter (+1, démarrage, P+1D) omitted.]
The image on the left is a normal speed counter, the one on the right is an extra speed counter. Extra speed counters have a + before the number and a red bicycle. Extra speed counters also have either sprint or démarrage printed at the top.
The number in the bottom left is the price of that counter in the advanced rules; the code in the bottom right represents the type of counter. You can also find this code on the team sheets.
The colours of the speed marker represent on what type of terrain they can be used. Green for plains and down-hill; grey for up-hill and cobblestones.
Counter codes
All counters have a code specific to that type of counter. These codes are also found on the team sheets and are sometimes used in these rules to refer to specific counters.
- P = plains (/ descent);
- M = mountains (/ cobblestones);
-
(2-4) = value of normal speed counter;
- +# (1-3) = value of extra speed counter;
- D = démarrage;
- S = sprint.
Hence, M+1D is a demurrage counter for mountainous terrain.
Note on the printed text: the source contains a few typos (for example "demurrage" for démarrage, "al riders", "An breakaway", "nor covered", and the place names "Parijs" and "Rével" and "st. Entienne" as printed on the stage list). They are reproduced as printed.
Rules
1. Game concepts and components
D6 or die — a special D6 / die with the numbers 0, 1, 1, 2, 2, and 3 on the different sides.
Démarrage — rider action resulting from playing an extra speed counter labeled as such.
Extra Speed Counter — speed counter that can be used in addition to two D6s or one D6 and one normal speed counter.
Game Turn — part of the game in which al riders move once.
Gap — distance in spaces between a rider and the last rider in the group before him if that rider belonged to that group at the beginning of the turn.
Group — a set of riders (or a single rider) on adjacent spaces. All riders on adjacent spaces at the beginning of a turn belong to the same group.
Normal Speed Counter — speed counter that can be used to replace one D6.
Speed Counter — a counter that can be used instead of or in addition to a die / the dice. There are two types, the normal speed counter, and the extra speed counter. See also the picture below.
Sprint — rider action resulting from playing an extra speed counter labelled as such.
Stage — a series of track tiles, starting with 'start' and ending with finish.
2. Game set up
[2.1] Before the start of the game, players have to agree on the exact number and nature of the stages in the race. It's no problem to break up the game between stages and continue later. It is highly recommended to play at least 5 stages and to include different types of stages in the race. At the end of these rules, you'll find all of the stages in the Tour de France of 2005.
The approximate time (for experienced players) needed to play a stage can be calculated with this formula:
Ts = 5 + (p × r × l) / 5
in which Ts is the approximate time needed for a stage in minutes; p is the number of players; r is the number of riders per players; and l is the length of the stage in tiles.
[2.2] Each player takes the previously agreed number of rider tokens of his/her colour (to a maximum of 5) and a team sheet.
[2.3] Each player gets the following speed counters: 3 x P2; 5 x P3; 3 x P4; 4 x P+1D; 2 x P+2S; 1 x P+3S; 3 x M2; 3 x M3; 1 x M4; 3 x M+1D.
[2.4] Each player distributes his/her speed counters among his/her riders such that:
- [2.4.1] no rider has more than 7 speed counters;
- [2.4.2] no rider has more than 2 counters from the following set of types of counters: P+2S; P+3S; P4; M4; and
- [2.4.3] no rider has both sprint counters and grey speed counters (up-hill / cobblestones).
[2.5] Each player marks what counters each rider has in the qualities boxes of his/her team sheet and stacks these counters in the speed counters box. Each player – if he/she wishes – decides on the name of his/her team and the riders in it and fills these in in the appropriate spaces.
[2.6] Initial ranking is determined by rolling D6s. The highest roller is the first team; the lowest is the last; etc. The riders are ranked no. 1 of the first team; no. 1 of the second team; etc.; no 2. of the first team; no. 2 of the second team; etc.; no. last of the first team; etc.; no. last of the last team.
3. Stage set up
[3.1] Lay out the track tiles as previously agreed (see rule 2.1), starting with the start tile and ending with the finish tile. Place the riders at the starting line in the order of the current ranking (see rule 4.7.4 ; or initial ranking at the start of the game – see rule 2.6).
4. Playing the stage
[4.1] The stage is played in a series of game turns. The stage is finished when the last rider crosses the finish line. Each rider moves in each game turn.
[4.2] The order in which riders move is determined by the group they are part of and the location of that group on the track. Groups closer to the finish move first. A group is a set of riders (or a single rider) on adjacent spaces. All riders on adjacent spaces at the beginning of a turn belong to the same group.
[4.3] Find the group closest to the finish that hasn't moved yet. That is the active group. Place the active group marker next to the first rider (closest to the finish) in that group. (Point the arrow at the space this first rider is in. It's important to mark that space in this way, because of breakaways.)
[4.4] All riders in a group are considered to be in the terrain the first rider is in. If the first rider is in a space on the edge of two track tiles with different terrain, the terrain of the tile closest to the finish determines the terrain of the group. Terrain of the starting and finish tiles is the same as that of the adjacent normal tiles.
[4.5] Phases for the active group:
- Breakaway phase;
- Breakaway Gaps Phase;
- Positions phase;
- Movement phase;
- Gaps phase.
[4.5.1] Breakaway phase
- [4.5.1.1] All players announce which of their riders in the active group are using a démarrage or sprint counter. Other players may respond with similar announcements (there is no player order). Announcements cannot be withdrawn or changed. As soon as a player makes an announcement, he/she moves the speed counters that rider is going to use to the left side of the used box on the team sheet. All speed counters committed are open to be seen by all players. No breakaway (sprint or démarrage) is possible without an extra speed counter. In addition to the extra speed counter, one D6 can be replaced by a normal speed counter. See 4.5.4 for normal movement rules.
- [4.5.1.2] An breakaway (sprint or démarrage) is only possible from a group consisting of more than one rider. Single riders cannot use extra speed counters.
- [4.5.1.3] A sprint can only be announced if there are no more up-hill spaces or cobblestone spaces between that group and the finish line.
- [4.5.1.4] All riders attempting to breakaway count the spaces that they may move (dice plus counter(s)) from the first rider in that group (rather than from their own position). (See 4.5.4 for normal movement rules.)
- [4.5.1.5] A sprint fails if none of the riders from the same group that uses a sprint counter that turn crosses the finish line. In that case, leave the rider marker(s) in its / their position(s) in the group (don't move it as in rule 4.5.1.4). Riders can still move normally (4.5.4) after a failed sprint and can be subject to position change (4.5.3).
- [4.5.1.6] Used speed counters (in the used box) are turned upside down (and moved to the right side of the used box) after usage, even in case of a failed sprint.
[4.5.2] Breakaway Gaps Phase
Gaps between the escaping riders are closed per the normal gaps rules in 4.5.5.
[4.5.3] Positions phase
All riders from the same team and in the same group that did not breakaway may exchange positions. (Note that – due to breakaways – the group may now have fallen apart, but that it is still considered a group until the end of the gaps phase for that group. What is a group is determined at the beginning of the game turn.)
[4.5.4] Movement phase
- [4.5.4.1] All players announce which of their riders in the active group that didn't breakaway are using a normal speed counter (no extra speed counters can be used in the normal movement phase). Other players may respond with similar announcements (there is no player order). Announcements cannot be withdrawn or changed. As soon as a player makes an announcement, he/she moves the speed counters that rider is going to use to the left side of the used box on the team sheet. All speed counters committed are open to be seen by all players.
- [4.5.4.2] Turn order within the group is determined by position. The rider closest to the finish goes first; the one closest to the start goes last.
- [4.5.4.3] To move a rider, roll two D6s or one D6 if a normal speed counter is used. Add the numbers rolled or the number rolled and the number on the counter. That is the maximum number of spaces that rider can move.
- [4.5.4.4] All riders move forward from their current position.
- [4.5.4.5] There can be only one rider in a space. Riders can move through occupied spaces, but must end their movement in an empty space.
- [4.5.4.6] If double zero is rolled for a rider, he falls. Immediately re-roll one D6. If it's another zero, that rider is hospitalized. Take him out of the race. He cannot rejoin in a later stage. The rider directly behind the falling rider (in turn order) immediately checks whether he falls as well. Roll one D6, if it's a zero, that rider falls. Check for possible hospitalization. If this second rider falls, the rider behind that has to check whether he falls, etc. etc.
- [4.5.4.7] Used speed counters (in the used box) are turned upside down (and moved to the right side of the used box) after usage.
[4.5.5] Gaps phase
Gaps before the gaps phase are not really gaps. These rules are intended to simulate slipstreaming and other advantages of being in a group of riders. Only gaps after the gaps phase represent 'real' gaps.
- [4.5.5.1] Depending on the type of terrain, gaps between riders from the same group can be closed. Relevant terrain for closing gaps is determined by looking at the spaces occupied by a rider, the rider he is trying to reach, and the spaces in between. The most difficult terrain is the terrain type for gap closing rules. Order of difficulty is: up-hill; cobblestones; plain; down-hill.
- [4.5.5.2] Gaps between escaping riders from the same group can be closed; gaps between riders that did breakaway and riders that did not are not closed. Riders that fell cannot close gaps.
- [4.5.5.3] The maximum closing distance is dependent on terrain: 0 up-hill; 1 on cobblestones; 2 on plains; and 2 or 3 down-hill.
Example. If a there are two spaces between a rider and the one in front of him, and both riders are from the same group, and neither did breakaway, and neither fell, and the terrain occupied by these riders and between them is all plains, the rider furthest from the finish may move two spaces forward to stay in the same group. If one of the four spaces would have been up-hill, that rider would not have been able to close in, since the maximum closing distance for up-hill terrain is 0 rather than 2 (in plains).
- [4.5.5.4] Gaps are closed from riders closest to the finish to riders furthest away.
- [4.5.5.5] In down-hill terrain, a rider can normally close a gap of 2, but may attempt to close a gap of 3. This is very dangerous, however. Roll a D6 if this is attempted. If a zero is rolled, that rider falls and is hospitalized (and therefore, out of the game).
- [4.5.5.6] If a gap cannot be closed, a rider does not move in the gaps phase.
[4.6] After all riders in a group have moved (or fallen) move the active group marker to the next group and repeat the procedure.
[4.7] The stage ends when the last rider crosses the finish line (or is taken out of the race either voluntarily or because of a fatal fall).
-
[4.7.1] If two or more riders cross the finish line in the breakaway phase of the same turn, the one that moves furthest over the finish line wins. If this is equal, roll D6s to determine the winner. (The same rule applies to the stage results (stage ranking positions) for riders that finish after the winner, but still in the breakaway phase.)
-
[4.7.2] If two or more riders cross the finish line in the normal movement phase, the stage result (stage ranking position) is the order in which the riders crossed the finish line during the game.
-
[4.7.3] Each player should write down the results of his riders in the stage results box of his team sheet, preferably in the following format:
S#: #st / s / tin which S# is the stage number, #st is the final position (stage ranking position) of that rider, +/-s is the number of game turns that rider finished after the winner and t is the sum of s for all stages played for that rider.
Example. If a rider is third in the second stage and crosses the finish line one game turn after the winner, and had exactly the same results in the previous stage, this would be the stage results: S2: 3rd / 1 / 2.
-
[4.7.4] The value of s is lowered by one (to -1) for the stage winner.
-
[4.7.5] If a stage is won by a rider who used an extra speed marker (sprint or démarrage) in that turn, all riders from the group that rider did breakaway from are considered to finish in time s = 0. However, they still have to physically finish the race according to the normal rules, because some of them may fall and they may affect the results of later groups.
[4.8] All speed counters used in a turn are turned upside down and stacked in the used box. At the end of a stage (or at the end of a resting day!), half that number (rounded up) is moved back to the speed counters box.
5. Time trials and team time trials
[5.1] In a time trial, all riders use the middle line of spaces on the track. There can be multiple riders on one space (put them side by side). No gaps are closed and no extra speed counters are used.
[5.2] In a team time trial, all riders use the middle line of spaces on the track. There can be multiple riders from different teams (not from the same) on one space (put them side by side). Gaps are closed only for riders from the same team. No extra speed counters are used. The finishing time (turn number) of the third rider in the team counts as the time for the first two riders as well. For the fourth and fifth finishing riders in a team, their real finishing time (turn number) counts as their stage result. (Because of gap-closing rules, it pays off to keep a team together as long as possible.) (If the game started with 3-rider teams, the time of the 2nd rider is also the time of the first, etc.)
6. Scoring
[6.1] Like the stages, scoring has to be agreed on at the start of the game. Normal scoring rules (for teams) are as follows:
- 1 point per stage won;
- n points for the winner of the overall standings (the t in 4.7.3);
- two thirds of n (rounded down if necessary) for the overall number 2;
- n minus what the number 2 got for the overall number 3.
With large numbers of participating riders, numbers 4 and 5 (etc.) may also get points. The total number of points should be twice the number of stages.
[6.2] Whoever gets the most points wins. There are no tie breakers in case of equal results.
[6.3] Jerseys
If players wish to do so, three different classifications (Jerseys) can replace the normal scoring.
- [6.3.1] The yellow jersey classification is the overall standing (t in 4.7.3; see also 4.7.6).
- [6.3.2] The green jersey is the stage winner classification. While the yellow jersey ranking is in time (or turns), this one is point based.
- [6.3.2.1] For all flat stages or stages with a single tiny hill far away from the finish line, the stage winner gets 3 points, the second gets 2 and the third gets 1.
- [6.3.2.2] For time trials and stages that have mostly up-hill and/or down-hill terrain, the winner gets 1 point.
- [6.3.2.3] For all other stages, the winner gets two points and the second gets 1.
- [6.3.3] The polka dot jersey is for the best climber. Again, this is a point based ranking. Different numbers of points are awarded for different size mountains. A mountain is a series of up-hill tiles followed by a series of down-hill tiles (or plains or the finish line). Whoever passes the last of those up-hill tiles (or the finish line if that follows an up-hill tile) first gets the most points.
- [6.3.3.1] The rider that passes the last of three connected up-hill tiles first gets 3 points, the second gets 2 and the third gets 1. It is not recommended to include mountains of more than 3 up-hill sections in a row.
- [6.3.3.2] The rider that passes the last of two up-hill tiles first gets 3 points, the second gets 2.
- [6.3.3.3] The rider that passes a single tile hill first gets 1 point.
7. Advanced rules
The Advanced rules change very little, but there are two versions. Both only change set up and both should only be played when all players are familiar with the basic game.
[7.1] Advanced rules, version 1
Rule 2.3 is replaced by:
All players get a previously agreed upon sum of money (there are tiny bank notes in the file RCT_money&riders, but this can be done just as well with pen and paper). 100 is recommended. (If teams are smaller than 5 riders, this amount of money should be smaller.) Players use this money to buy speed counters for the prices in the left bottom corner of those markers.
Players should agree on a point value (in the final score) of unused money.
[7.2] Advanced rules, version 2
Rules 2.3 and 2.4 are replaced by:
The players together design all of riders available. They determine the names of all riders and give them appropriate numbers and types of speed counters. (It is recommended to apply the limitations of rules 2.4.1 to 2.4.3 to these riders.)
All players receive a previously agreed upon sum of money. 100 is recommended.
All riders are auctioned to the players. Only the highest bid is paid (to the bank). Which rider is to be auctioned at what time is decided by voting.
Before bidding starts, players should agree on a point value (in the final score) of unused money.
8. Other rules
[8.1] No limit in the number of any component is intentional. Make as many of any component as turns out to be necessary.
[8.2] Everything not covered in these rules (or nor covered clearly enough) is decided by voting, bearing in mind that the intention of the game is to simulate road cycling.
9. Tour de France 2005
Approx. playing time:
- 2 players, 5 riders each: 10 hours
- 3 players, 4 riders each: 12 hours
(no. players times no. riders is playing time in hours)
Of course, stages can be selected to make shorter races. A good 5 day race would be stages 2, 9, 14, 7, and 20 (in that order).
The stages are listed below as printed (the track-layout diagrams are omitted).
- Stage 1: time trial, Fromentine - Noirmoutier, 19 km
- Stage 2: Challans - Les Essarts, 182 km
- Stage 3: La Châtaigneraie - Tours, 213 km
- Stage 4: team time trial, Tours - Blois, 68 km
- Stage 5: Chambord - Montargis, 183 km
- Stage 6: Troyes - Nancy, 199 km
- Stage 7: Lunéville - Karlsruhe, 229 km
- Stage 8: Pforzheim - Gérardmer, 232 km
- Stage 9: Gérardmer - Mulhouse, 171 km
- Resting day
- Stage 10: Grenoble - Courchevel, 193 km
- Stage 11: Courchevel - Briançon, 173 km
- Stage 12: Briançon - Dignes les Bains, 187 km
- Stage 13: Miramas - Montpellier, 174 km
- Stage 14: Agde - Ax 3 Domaines, 221 km
- Stage 15: Lézat sur Lèze - St Lary Soulan, 206 km
- Resting day
- Stage 16: Mourenx - Pau, 181 km
- Stage 17: Pau - Rével, 240 km
- Stage 18: Albi - Mende, 189 km
- Stage 19: Issoire - Le Puy en Velay, 154 km
- Stage 20: time trial, st. Entienne, 56 km
- Stage 21: Corbeil Essonnes - Parijs, 144 km