River Valley Jewelcraft thumbnail

River Valley Jewelcraft

River Valley Jewelcraft Rulebook

Table of Contents

Table of Contents

Components

  • 5 Worker Meeples
  • 5 Character Boards
  • 2 Dice (1 silver, 1 gold)
  • 1 Active Player Marker
  • 25 Rubble Tokens
  • 5 Mine Boards
  • 88 Jewelry Cards
  • 1 Tile Market
  • 34 Rock Tiles
  • Solo Mode Action Bar
  • 25 Gems (5 in each color)
  • 5 Resource Tracks
  • 1 Scorecard
  • 1 Dry Erase Marker

Setup

  1. Place the Tile Market in the center of the table. Choose the correct side for your player count.
  2. Shuffle the Rock Tiles to create a supply above the Tile Market. Reveal 5 and place them faceup in the blank tile spaces in the Tile Market. Remove a number of random Rock Tiles according to player count:
PlayersRock Tiles Removed
1 Player*Remove 13
2 Players**Remove 16
3 PlayersRemove 6
4 PlayersRemove 6
5 PlayersUse all

*See separate sheet for Solo rules. ** See pg. 8 for 2-player variant rules.

  1. Give each player a Mine Board, a set of 5 same-lettered Rubble Tokens, a Character Board, the matching Worker Meeple, a Resource Track, and 1 gem of each color.
  2. Shuffle and place a Rubble Token facedown on each rubble space on your Mine Board.
  3. Place the Worker on the Mine Board in the start location found on your Character Board under "Set Up". Some advanced characters (marked with a star) have additional set up requirements; do these now.
  4. Place your Resource Track below your Mine Board with your 5 gems on the 0 space.
  5. Separate the Jewelry Cards into Basic, Fine, and Artisan decks. Shuffle the Artisan deck and reveal 3 cards. Shuffle the Fine deck and reveal 3 cards. Divide the Basic deck into faceup red-gem ring, blue-gem necklace, and green-leaf piece piles.
  6. The player wearing the most jewelry takes the 2 dice and the Active Player Marker.

Overview

In River Valley Jewelcraft players each run their own mining operation. Players take turns excavating rocks and moving their workers deeper into the mine to collect gems. Race to refine those gems into high quality jewelry through clever mine optimization. The player with the most Victory Points wins!

Game Rounds

The game is played in clockwise turns, beginning with the player holding the Active Player Marker. On your turn, you are the active player; all other players are the inactive players. Everyone will take actions each turn.

On your turn, perform the following steps in order:

  1. Roll & Choose (active)
  2. Excavate (everyone)
  3. Work (inactive)
  4. Craft (active)
  5. Explore (active)

1. Roll & Choose (active)

Roll both dice. Choose 1 die to use for yourself. The other die is used by all other players.

2. Excavate (everyone)

All players use their assigned die to dig their corresponding row or column.

  • Silver die: When using the silver die, dig all spaces in the rolled number's column.
  • Gold die: When using the gold die, dig all spaces in the rolled number's row.
  • Pickaxe face: When a pickaxe is rolled, dig all spaces in the row or column (depending on the die color) your worker is located. Also dig all pickaxe spaces not in that row/column.

Digging

To dig a space means to activate the icons on that space. (An icon covered by a rubble token or a rock tile cannot be dug.)

  • Gem icons: When dug, gain 1 of each shown gem.
  • Arrow icon: When dug, also dig the space pointed to. If there are multiple arrows on a space, choose 1.

3. Work (inactive)

All inactive players each perform the Work ability on their Character Board. This lets players move their worker and gives them a choice to either dig that space or clear a rubble token (see Character Boards, pg 6).

4. Craft (active)

You may collect faceup jewelry cards from the display by spending gems equal to their cost.

Each turn you have a craft limit of 4 (the craft limit icon). Basic jewelry uses 1 craft limit, while Fine & Artisan jewelry each use 2.

Place collected faceup jewelry in front of you.

The jewelry card key:

  • Jewelry Type: the symbol at the top right of the card.
  • Craft Limit: the star symbol on the card.
  • Gem Cost: the gems shown in the circles at the top left of the card.
  • Victory Points: the shield symbol at the bottom of the card.
  • Card Effect: the text at the bottom of the card.

Move down on the gem track equal to the card's cost. (The gem track has its gem rows labeled Common for the red, blue, green and white gems, and Rare for the purple gem.)

5. Explore (active)

Choose 1 of the 5 rock tiles in the market. Collect the gem shown below the space, if any. Place your tile faceup on any spaces (other than uncleared rubble spaces) in your mine. Tiles may be rotated or placed on top of previously placed tiles, as long as they remain level.

Turn End

  • Replenish any cards crafted during the Craft action from their respective decks.
  • Slide all tiles in the Tile Market to the right and draw a new tile from the supply.
  • Pass the Active Player Marker to the player on your left.

Character Boards

Each player's Character Board has a basic side and an advanced side (marked with a star). For your first game, we recommend all players use the basic side.

  • Worker: Your worker meeple.
  • Set Up: This is where your worker token is placed at the start of the game and returns to when they move off the board. Some workers have additional abilities they begin with at set up.
  • Work: Each turn during the Work action, all inactive players must move 1 space in an indicated direction. Then they may either dig (see pg 4) or clear a rubble token (see below).
  • Remodel: The advanced side (marked with a star) may have additional unique abilities to perform.
  • Exit: When a down, down-right, or right arrow would move a worker off the board, the Exit ability triggers. Return your worker to their start location. Finish your Work ability after your worker returns to start.

Example, the character Fenwick Atelier:

  • Set Up: Start at (starting space icon). Clear any 1 rubble token.
  • Work:
    1. Move down, down-right, or right.
    2. Choose One:
      • Dig your worker's space.
      • Clear a rubble token.
  • Remodel: When a tile is placed on a starting rubble icon, dig both tile spaces.
  • Exit: May move a tile in your mine to another valid position. Return to start.

Iconography Guide

Gem Conversion

Some jewel cards allow you to convert gems into other gems. These cards can each be used once per turn, on your active turn, including the turn it is acquired.

Example: Spend 1 red gem to gain 2 blue gems.

Wild Gem

This represents any gem of your choice.

Rubble Tokens

These can only be cleared during the Work action, when a worker is standing on a rubble token.

When cleared, flip it faceup, collect the gem(s), and discard the token.

Once it is cleared, that space is now available for Rock Tiles to be placed.

Rock Groups

Each tile space and some starting mine spaces have 1 of 3 rock types. A rock group is a contiguous area of orthogonally connected spaces with a matching rock type. Players' largest connected rock groups score victory points at the end of the game.

Game End & Scoring

When the Tile Market cannot be replenished to 5 tiles, the game ends, and players proceed to scoring. Each player will have taken an equal number of turns.

  1. Jewelry: Score victory points on each of your crafted Jewelry.
  2. Jewelry Sets: Score 4 victory points for each set of a red-gem ring, a blue-gem necklace, & a green-leaf piece.
  3. Tiara Abilities: Score victory points for any end game abilities on your tiara.
  4. & 5. Rock Bonus: Score 2 victory points for each space in your largest contiguous rock group. Score 1 victory point for each space in your 2nd largest contiguous rock group.
  5. Gem Bonus: Score victory points equal to the gem you have the fewest of.

The player with the most Victory Points is declared the winner! In the event of a tie, the tied player with the most remaining gems wins. If still tied, the players share the victory.

Special 2-Player Rules

2-player games follow the same standard rules, but with a modified action sequence. On your turn, perform the following steps in order:

  1. ROLL & CHOOSE (active)
  2. EXCAVATE (both)
  3. WORK (both)
  4. DIG DEEPER (both)
  5. CRAFT (active)
  6. EXPLORE (active)

Work: Both players take the Work action in a 2-player game.

Dig Deeper: Dig Deeper is a new action, just for 2-players. Both players reroll their assigned die from the Roll & Choose action. Dig your rolled row or column.