RulesPal
Chat
Rulebook
Order of the Day: Normandy thumbnail

Order of the Day: Normandy

Order of the Day: Normandy Rulebook

Table of Contents

Table of Contents

  • Contents
  • Setup
  • Round Zero
  • Standard Rounds
  • Combat Example
  • Special Units
  • 1943: Operation Roundup Variant
  • Solo Variant

Contents

Contents: 1 main board, 1 action board, 2 player boards, 82 unit cards, 20 basic combat cards (Allied or German), 34 combat cards, 35 division tiles, 35 division tokens, 7 defense tiles, 3 invasion arrows, 12 resistance tiles, 4 fighter tiles, 120 hit cubes, 18 combat/control tokens, 6 active combat tiles, 1 round marker (German) and 1 control marker (Allied).

Setup

  1. Place the game board in the middle of the table.
  2. Place the Allied player board on the side closest to England and the German player board on the opposite side.
  3. Place the German round marker and the Allied control tracker on their respective board tracks.
  4. Give each player the deck of unit cards, basic combat cards, and division tiles that match their side. Shuffle the unit and combat decks separately and place them on the player boards.
  5. The German player takes 7 defense tiles and 12 resistance tiles.
  6. The Allied player takes 3 invasion arrows, 4 fighter tiles, and combat/control tokens.
  7. Set the hit cubes and combat tiles aside.

Transcriber's note: the printed setup list runs from step 7 to step 9; no step 8 is printed. Transcribed as printed.

  1. Shuffle the deck of 34 combat cards, draw four and display them near the board.

Round Zero

Setup is completed by resolving all the steps listed on the action board for Round Zero. This will take players through the build-up (A) and launch (B) of the invasion, setting the tone for the remainder of the game.

Decoy Divisions: Each player has 3 decoy divisions that may be deployed any time divisions are to be deployed. Whenever a decoy is revealed, it is removed from the game. Unrevealed decoy divisions have a movement rate of 1 (the same as infantry divisions).

Division Limit: There is a limit of 3 divisions per space per side (3 Allies and 3 Germans max).

Recruitment: Draw the indicated number of unit cards from your deck. Each of these cards has 3 regiments or battalions, and each must be assigned to a division slot located along the top (Allies) and bottom (Germans) of the board. You may choose any available division for each slot. No more than 2 unit cards may be assigned to any division. Unit cards must match the type indicated on its division. Infantry units may be assigned to the airborne division (101st). If a card instructs you to draw more cards, do so.

Defenses (Germans only): The German player places the indicated number of defense tiles face down (one per designated space along the coast). Also place 6 resistance tiles face down in any territories. You may place multiple in the same territory.

Staging/Deployment: Place the indicated number of divisions face down. Allies place them in the three staging zones (in England), while Germans may place their divisions in any green territory. Decoy divisions are included in these actions. Note: The Allied airborne divisions (101st & 6th) are not placed until phase (B) step 2. Note: There is a limit of 3 divisions per territory per side. This does not apply to staging zones. However, any Allied division over 3 dedicated to a single invasion territory must wait in the staging zone until the territory has fewer than 3 Allied divisions in it.

Recon (Allies only): The Allied player may look at 1 defense tile and 1 resistance tile.

Launch (Allies only): Phase (B) of Round Zero begins with the launch of the invasion. The Allied player places the 3 invasion arrows on any 3 invasion zones. These will dictate all future Allied deployments. At least one division (including decoys) must be located in the adjoining staging area for each arrow.

Paratroopers (Allies only): The Allied player places the airborne divisions (101st & 6th, if available) on any green territories. Resolve any resistance tiles there. These divisions will be treated as normal infantry divisions for any future movement and combat.

Battleships (Allies only): For each invasion arrow, flip and resolve the revealed hits against any German divisions in these territories. Flip each arrow back over after it has been resolved.

Landing (Allies only): Allied divisions are moved through invasion arrows onto adjacent coastal territories. If the territory is unoccupied, place a control token and increase the Allied control track marker accordingly. If the territory is occupied by at least one German division, add a combat token. Any Allied division beyond the first 3 dedicated to a single invasion territory must wait in the staging zone until there is room for it.

Beaches (Germans only): Reveal the defense tile in each invaded coastal territory and resolve the hits against incoming Allied divisions. Then, remove all defense tiles from the game. Also resolve and remove any resistance tiles present.

Combat: Resolve one round of combat in each contested territory from west to east. Place the combat location token in the current combat space and active combat tokens above all involved divisions. Each player places the top 5 cards from their combat decks face down into a stack. These will be resolved in alternating order. The German player always attacks first. Flip over the top card, choose one of the available options (if the required unit is present), resolve any hits (adding cubes top to bottom, unless otherwise stated, to any involved divisions), and place the card in the player's discard pile. If all units in a division are filled with hit cubes, the division's tile and token are removed from the game. Once the last Allied card has been resolved and discarded (or one side has been destroyed), the round of combat ends. Take 1 combat card of your choice from the display and add it to your combat discard pile each time you defeat a division (not counting decoys).

If at the start of a new combat you do not have the 5 cards required for your combat stack, shuffle your discarded cards and place them face down at the bottom of the combat deck. Then place the top 5 cards into a stack and begin the combat.

Overflow Hits: Any hits that do not match the division type being attacked register as overflow hits. Add the cubes to the section of your player board that matches the type being attacked instead of a unit card. When a section is filled, remove all hits from that section and add a hit to a unit of your choice of the indicated division type.

Once Round Zero has been completed, advance the round marker to begin Round One.

Standard Rounds

After Round Zero, the game continues with up to 4 standard rounds.

Movement: You may move any or all divisions in uncontested territories. Infantry and airborne divisions move 1 space; armor divisions move up to 2 spaces. If moving 2, a division's units must be revealed. A division's movement must end when it enters a territory containing enemy units. A division may leave a contested territory only if the number of friendly divisions that remained would be equal to or greater than the number of enemy divisions in the territory. The composition of the divisions is not considered. Be sure to mark contested territories with a combat/control token (combat side up). Adjust the Allied control marker if a territory they control becomes contested. Note: There is a limit of 3 divisions per territory per side.

Fighters (Allies only): The Allied player places the four fighter tokens on any or all of the German reinforcement zones. You may place multiple fighter tiles in the same zone.

Reinforcement: Draw the indicated number of unit cards from your deck. Each of these cards has 3 regiments or battalions. Each of these cards must be assigned to a division located along the top (Allies) and bottom (Germans) of the board. Reminder: Each division can have only two unit cards assigned to it at any point in the game. Unit cards must match the type indicated on its division. Cards may not be added to divisions already on the board. If a card cannot be placed into a division, set it aside in the reserve section of the player board and place it in a subsequent round. Allied divisions are added to the green coastal territories adjacent to invasion arrows. German divisions are placed in reinforcement zones. Reveal fighter tiles and resolve any hits on German units. Return the fighter tiles to the Allied player.

During this action you may choose to relieve one or more divisions (usually ones that are near to being defeated). To relieve a division, remove its unit cards and any hit cubes. Discard these unit cards and remove the division's tile and token from the game. The division slot may now be filled with a new division.

NOTE: This does result in your opponent adding a new combat card (as if the division had been defeated).

New Combat Cards: At the beginning of each standard round and each time you destroy a real enemy division, add 1 combat card from the display to your combat discard pile. Be sure to immediately refill the display.

Experience: Beginning with the German player, select one of the displayed combat cards and add it to your discard pile. Immediately refill the display with a card from the deck.

Combat: See above. Note that only one round of combat (5 cards per side) is ever resolved during a single game round. Therefore, opposing divisions may both survive to fight again during the next round.

Advance the round marker, then check for victory. If the Allies have not met their victory condition, begin a new round unless you have just completed the fourth standard round.

Ending the Game: If the Allies control 12+ points of uncontested territory at the end of any of the first four standard rounds, the Allied player wins. If the Allies do not, the German player wins at the end of the fourth standard round.

Combat Example

The worked example is printed as a diagram with text beside it; the text is transcribed below.

In this example, the Allied 1st Infantry Division is attacking two German divisions. Each player forms a small deck of 6 cards from the top 6 cards of their combat deck.

The German player always attacks first, revealing the first of these 6 cards. Normally, this would be a miss. However, since the Germans have an artillery unit, they may score either 1 infantry hit or 1 armor hit. The Allies only have an infantry division, so they take 1 hit, starting at the top of the division's units.

The Allied player then reveals a card. This card could be used to score 1 hit against an infantry division (from the bottom-up). However, it could be better to make use of the anti-tank unit (only one is needed), causing 3 hits to the German armor division and destroying the first Tiger Battalion.

The German player then reveals the next card. Since there is still a surviving Tiger unit, it causes damage. However, it only hits twice, as there are no armor divisions to take the three other hits listed. These cause Overflow hits.

Combat continues until one side is destroyed or all 6 cards for each side have been resolved. Be sure to take a new combat card if you destroy a division!

Special Units

Some battalions and regiments have special abilities that are deployed when these units are activated by a combat card.

Engineer Battalion (Allies only): Resolve the hit(s) indicated, then reveal the next card in your combat stack, resolve it and shuffle it back into the combat stack. If no cards remain in the stack, reveal the top card from your combat deck, resolve it, and place it into your discard pile.

Headquarters: Draw the next 3 cards in the combat stack. Choose one to resolve, then shuffle all 3 back into the stack. If there are fewer than 3 cards remaining in the stack, take all 3 from the top of the combat deck, resolve one, then place all 3 in your discard pile.

Medical Battalion: Remove the indicated number of hit cubes from any infantry units involved, including those completely filled with cubes.

Maintenance Battalion: Remove the indicated number of hit cubes from any armor units involved, including those completely filled with cubes.

Recon Battalion: Reveal the next card in the combat stack, resolve it twice, then shuffle it back into the combat stack. If no cards remain in the stack, take the top card from the combat deck, resolve it and then place it in your discard pile.

1943: Operation Roundup Variant

This variant plays almost exactly like the standard game, but on a smaller scale. The following changes apply:

Setup: Remove the following components: 1 random invasion arrow, all defense tiles, all resistance tiles, and 2 fighter tiles (the largest and smallest). Add the following 1943 cover tiles to the board: Brittany Landing Site, St. Malo Landing Site, Cherbourg Landing Site, 3 Allied Division Slots, Argenton Reinforcement Site, St. Quentin Reinforcement Site, and the scoring chart adjustment (covering the right-most part of the chart). Otherwise, follow the standard setup.

Round Zero: Incorporate the following changes.

A: Preparation

  1. (Allies) Draw 10 unit cards instead of 14.
  2. (Germans) Draw 8 unit cards instead of 10.
  3. (Germans) Place only the 6 resistance tiles.
  4. (Allies) Place only 4 divisions.
  5. Skip.
  6. (Allies) Look at only 1 resistance tile.
  7. No change.
  8. No change.

B: Invasion

  1. (Allies) Place only 2 arrows.
  2. No change.
  3. No change.
  4. No change.
  5. (Germans) Resolve only resistance tiles.
  6. No change.

Standard Round: Incorporate the following changes.

  1. Reinforcement: Germans draw 2 unit cards; Allies draw 3 unit cards.

All other rules remain the same as the standard game. The game ends at the end of turn 3 (Germans win) or immediately once the Allies reach 8 points (Allies win).

Solo Variant

This variant can be played using the standard setup or in combination with the 1943 setup. You will play as the Allies, and the solo opponent will play as the Germans. Use the setup rules above, replacing the German deck of unit cards and combat cards with the Solo unit cards and Solo combat cards.

Solo Unit Cards: These cards are either infantry or armor. Only one card may be assigned to each division.

Solo Combat Cards: These cards are tied to the division type, not the unit type. If a combat contains German infantry and armor divisions, choose the result that causes the most damage.

Round Zero: Incorporate the following changes.

A: Preparation

  1. No change.
  2. (Germans) Draw HALF the number of cards.
  3. (Germans) Randomly place the 7 defense tiles face down.
  4. No change.
  5. (Germans) Randomly place the 12 resistance tiles face down: 1 per coastal territory and 1 in each of the following: St. Nazaire, Evreux, Beauvais, Cambrai, and Brussels.
  6. No change.
  7. (Germans) Randomly place divisions (including decoys) facedown: 1 per coastal territory, plus an extra in Calais (and Cherbourg, if possible).
  8. No change.

B: Invasion – No changes.

Standard Round: Incorporate the following changes.

  1. Movement: Move free German units one territory towards the closest Allied unit.
  2. Fighters: Skip this step.
  3. Reinforcement: Germans draw 2 unit cards. Place each in a different reinforcement zone, selecting the two zones closest to Allied units.
  4. Experience: Germans do not gain new combat cards (even when they destroy an Allied division).

All other rules remain the same as in the standard game.