Operación Backbone: La invasión aliada del Protectorado, 1942-1943 thumbnail

Operación Backbone: La invasión aliada del Protectorado, 1942-1943

Operación Backbone: La invasión aliada del Protectorado, 1942-1943 Rulebook

Table of Contents

Table of Contents

1. Introduction

This wargame simulates the Allied plan and the hypothetical confrontation in the Spanish Protectorate of Morocco, under the assumption that the Allied invasion occurred at the end of December 1942. As a result of German and Italian pressure, having made a dent in the Franco regime's determination of not wanting to interfere, as well as internal pressures, Spain was forced to intervene in the conflict. This allowed the passage of the Germans in the direction of Gibraltar and the Spanish Protectorate of Morocco, which would pose a serious threat to the allies, who would be forced to activate "Backbone" at the first signs of this situation.

Like any hypothetical situation or "What if", the situation that arises cannot be exactly the same as the historical one, but an attempt has been made to respect as much as is possible of the order of battle of the different armies involved and the planned lines of action of the plan "Backbone", but giving players some freedom with deployment and Allied amphibious landing.

2. Scale

The scale of the game is 3 days per turn and approximately 17 km per hex. The combat units are Brigades, Regiments, "Combat Commands" and Battalions, which belong to Divisions or Army Corps (CE) and Task Forces (TF).

3. Generalizations

In the game you always round down. The attack or defense factors are calculated by stacks.

The minimum factor / number, whether in combat factors, movement points, etc., will always be at least 1, even if its sum, rounding down, is lower.

The effects are always cumulative.

Whenever mention is made of a distance from one unit to another, it must be understood without counting the hex of the first one of them but counting that of the destination hex.

On the first turn, the weather will always be good, and all units will be in supply, so there is no need to check the weather or supplies.

4. Tokens and markers

The tokens represent Headquarters and combat units. Units have various information printed on them, see Figure 1.

Figure 1

A. The unit size if it is a brigade, regiment, or battalion.

B. Number of steps, represented by red dots, as a graphic reference of the number of steps the unit has, and which represent its size, with a minimum of 1 and a maximum of 4.

C. Movement, represents the unit's mobility, expressed in movement points (MP).

D. Defense factor, defensive capacity of the unit.

E. Attack factor, offensive capacity of the unit.

F. Its Superior unit, the Division to which it belongs, if it does not have it, it means that it is a CE (Army Corps) / TF (Task Force) unit.

G. Efficiency factor.

H. Unit type with NATO symbology (infantry, armor, engineers ...) and that, by its color, can be determined as to what TF (Task Force) or CE (Corps) it belongs.

I. Historical identification of the unit.

Editor's note: the printed defense-factor entry (D) carries a stray fragment ("de la unidad.") left over from the layout; it is dropped here.

The Headquarters units (CG "Cuartel General" / HQ Headquarters), instead of the attack factor, represents the support factor that they can provide to the combat units, in the form of a modification of the die roll (MD). Therefore, they cannot attack by themselves, if not supporting the attack or defense of the combat units. Additionally, the defense factor is located in parentheses, which means that it can only be used when the unit is alone in a hex and cannot be used to add it when stacked with other combat units. See Figure 2.

Figure 2

The markers represent various graphical aids for controlling multiple facets of the game.

Control of the current shift, weather conditions, control of the Strait of Gibraltar, air and naval points, shortages, beachhead and fortifications. See Figure 3.

Figure 3

Note. On page 20 of this magazine, readers will find additional printed markers that augment those on the die-cut index card template. They will also be available in the download section of the website: www.alealudopress.com

5. Stacking

The tokens can have between one and four steps. Maximum stacking is 16 steps per hex in clear or broken terrain, 10 in city and half mountain hexes, and 8 in mountain hexes.

Stacking is taken into account at the end of the movement phase.

The units of the American and English armies cannot stack together at the end of a turn, although they can pass through the hex that one or the other is occupying, as long as they do not end the movement there.

Spanish and German units can be stacked together without any penalty. (Exception: event "Dissensions in the Axis". See point 10.2 of these rules).

There are no restrictions on stacking units of different CE / TF, of the same nationality.

6. Efficiency

Efficiency represents a value for each unit, training, morale, "Esprit de corps" and the doctrine of your army. This value is used as a modifier in combat, and how it works is explained in point 16.3 of these rules, "Difference in efficiencies".

7. Zones of Control

Zones of Control (ZOC) are the 6 hexes adjacent to a combat unit or CE / HQ. ZOCs influence movement and supply.

The ZOCs do not extend across rivers, or through impassable hexes, such as sea hexes, or mountain hexes for armored units (see point 15.2 of the rules). The latter cannot project ZOC from a mountain hex with a road to another hex that is not connected by a road.

7.1. ZOC and movement

When a unit enters an enemy ZOC, it must end its movement, even if it has MP left to continue moving, (except units with special abilities. See point 9.2 of these rules). A unit can move from ZOC to another enemy ZOC, of the same or different unit, consuming all its movement points, and therefore, as its only movement that turn. No additional MP is consumed for entering or exiting an enemy ZOC.

For movement purposes, neither a ZOC nor a friendly unit can negate the enemy ZOC in that hex, and thus, if a unit intends to move through an enemy ZOC where there is a friendly unit, it must stop in the enemy ZOC.

7.2. ZOC and supply

Enemy ZOCs block supply lines (see point 12 "Supplies"). A friendly unit (not a friendly ZOC), negates the enemy ZOC in that hex for supply line purposes, and therefore supply can be traced through a hex with the presence of a friendly unit, even if it is in an enemy ZOC.

Example, Zone of Control and combat

In this example, and starting from the initial position of the units and the movement segment in Allied hands, the player first decides to move the unit of 1 Ranger + 509 Para, through the gap left by the two Spanish units. Normally it should stop when moving from one enemy ZOC to another and end its movement, but since Rangers + Para have the special ability to ignore the first enemy ZOC encountered, it can infiltrate and move one more hex, up to 6,17 or 7,16, and stop, since it cannot ignore the second enemy ZOC.

Later, the CCA of the 1st AD, takes advantage of the same gap, and moves to 7.17, (6,17) but this unit must stop in that hex when it is in an enemy ZOC. So far everything would go well, having managed to sneak the Allied units into the Spanish defenses, except that the two units would be out of supply, at the beginning of the next turn, when the supply was checked, so the Allied player decides to move the 36th unit. Engineer Regiment until 8.17 so that the supply line (SL) can be drawn through it, (and because it has to stop when entering enemy ZOC) to reach the tanks and rangers, from the ZOC of the Engineers, it does not allow the passage of the SL, but its presence in the hexagon, does.

8. Deployment and sequence of play

8.1. Deployment

Deployment is carried out as specified in the scenarios, in point 18 of these rules.

8.2. Game sequence

The game has 10 turns, each divided into different phases and segments, indicated in the following game sequence:

Administrative phase (both players):

  • Meteorology and events segment.
  • Control segment of the Strait of Gibraltar, (until achieved).
  • Segment for determining supply.
  • Segment of reinforcements, replacements and fortifications.

Errata note: the printed errata for the sequence of play on the game's tables and help sheet (below the game map) suppress "Deploy (first turn only)" and rename the replacements entry to "Segment of reinforcements, replacements and fortifications". That map sheet is not reproduced here; the list above already gives the corrected segment name.

Operations phase:

Allied Subphase:

  • Amphibious invasion segment, (only first turn).
  • Segment of land movement.
  • Combat segment.

Spanish sub-phase:

  • Terrestrial movement segment.
  • Combat segment.

End of Turn. Determination of the conditions of victory if it is the last turn.

9. Headquarters and special units

9.1. Headquarters

These tokens (CG or HQ for its acronym in English) provide combat support for the units under their command and each has a color that it shares with those units.

In combat, a CG / HQ can provide a favorable die roll (DRM) modifier of 1 for the Spanish player or 2 for the Allied player, representing the Army Corps / Task Force capabilities it can contribute, (mainly artillery, but also smaller units of anti-tanks, antiaircraft, communications, greater quantity of supplies, etc…). For this, the units that participate in combat and want to benefit from this support, must be under the control of the same CE / TF as the CG / HQ, and the hex where the combat takes place, be a maximum of 2 distances from the CG / HQ for the Allied player, or 1 for the Spanish, and have supply line to him. To remember it more easily, think that the distance to receive the support is the same as the DRM (Die Roll Modifier) of the CG / HQ.

This support can be used twice per turn, that is, once during a single attack in the player's own phase, and once during a single defensive combat in the enemy phase.

The CG / HQ cannot advance after combat if it is stacked in the hex from which it is attacking, and the defender retreats.

If a CG / HQ is destroyed, it is recovered 2 turns later in a city that the side controlled at the start of the game at the player's choice, respecting that it is closer to the units under its command than to those of another formation. In the case of the English, they can do it at the beachhead.

9.2. Special units

Units with qualities intrinsic to themselves are detailed here.

  • Legionaries, "The bride and groom of death": By themselves, or stacked with other units, a +1 MD or -1 MD can be added (voluntarily, not mandatory), to the combat roll (offensive or defensive) if there are Legionary units present (1 or more units). If casualties occur for the Spanish player, the legionary unit will necessarily assume the first casualty. If there is more than one legionary unit involved in combat, the Spanish player chooses who takes the casualty.

  • "Moors": The Spanish player's Regulars and Mehalas units can ignore the first enemy ZOC hex when moving. This does not affect the effects of ZOC on supply lines, only the unit's movement capacity.

  • British "Commandos" and US Army Rangers + Paratroopers unit: these two units can ignore the first enemy ZOC hex when moving. This does not affect the effects of ZOC on supply lines, only the unit's movement capacity.

  • British paratrooper battalions of the 1st Parachute Brigade: when the option is chosen to use the three battalions of the British paratrooper brigade, independently and not as an entire unit and part of the amphibious landing, these units have the ability to carry out a paratrooper assault, (see optional rule of scenario 1, in point 18.1 of the rules).

  • Engineers: these units provide +1 MD when attacking city hexes or hexes containing fortifications. If there are casualties, the engineers will compulsorily receive the first of them.

Administrative phase

10. Meteorology and events

10.1. Meteorology

At the beginning of each turn, the meteorological time that exists during the turn will be determined (exception: remember that according to point 3 of the rules it is specified that in the first turn, there is always good weather), and will depend on the result of a roll of 1D6 in the Meteorology Table.

  • Good weather: 1-4. In good weather there is no effect on the game.
  • Bad weather: 5-6. The bad weather effects are the following:
    • Units with 4 or 5 MP are reduced to 3 MP.
    • Air points in that turn are reduced to 2 for the Allies and 0 for the Spanish.
    • Naval points are reduced to 0.

See Table and Help Items (elements) printed at the bottom of the game map.

10.2. Events

In the odd turns, the Spanish player, and in the even turns, the Allied, will draw some markers from an opaque container that each one will have, that represent an event that affects the game. They can be played at that time and if saved, during odd, Spanish or even turns Allied, by each side, as appropriate. The effects of each of them are explained below:

Allies

Rebellion in the Rif: The allies propitiate and support an uprising in the Rif areas of the Protectorate.

  • Use: can be used immediately or saved, (hidden) to be used only once, on any even turn, as soon as it is available.
  • Effect: The Allied player places 2 Rif units, in any mountain or half mountain hex, controlled by the Spanish player, still in ZOC, but not occupied by a Spanish unit. These Rif units are now controlled by the Allied player but cannot stack or attack together with Allied units. These units can ignore the first enemy ZOC, they will always be in supply, but will not have ZOC, nor can they receive replacement points.

Ultra: The Ally, thanks to the information provided by Ultra, the Spanish plans are discovered.

  • Use: can be used immediately or saved (hidden), to be used only once, on any even turn as soon as it is available.
  • Effect: The Allied player randomly steals a chit from the Spanish player, either those pending to come out or those that he already has ready for use but has not used yet.

Increased Tactical Air Power: Allies enjoy increased tactical air support as a one off action.

  • Use: can be used immediately or saved (hidden), to be used only once, on any even turn as soon as it is available.
  • Effect: On that turn Allied air points will increase from 6 to 12. If there is bad weather (and the Allied player has chosen to use it that turn), it will only be 4 factors.

Naval Power Increase: Allied navies on a particular and exceptional occasion can increase their units in the area.

  • Use: can be used immediately or saved (hidden), to be used only once, on any even turn as soon as it is available. Not applicable in a bad weather turn.
  • Effects: Naval support points will increase from 2 to 3 and a -1 is applied to the Control of the Strait roll on that turn if it is not already controlled by the friendly player.

German limited Offensive in Tunisia: The Germans carry out a limited attack against the Allies in Tunisia causing casualties and confusion among the Allies, requiring reinforcements.

  • Use: immediately on the same turn.
  • Effect: the Allied player will not have replacements that turn and has to withdraw two battalions (of armored / tank destroyers / commandos / rangers or paratroopers), from the game (to send them to Tunisia) from among those units on the map (or ready for use in the case of paratroopers), and are in supply. The Allied player chooses which units. Such units will no longer participate in the remainder of the game.

The OSS buys wills: the US secret services promote desertion among the enemy troops.

  • Use: can be used immediately or saved (hidden), to be used only once, on any even turn as soon as it is available.
  • Effect: for each Mehalas unit and in a single GFRI unit to be chosen by the Ally, it must pass a 1D6 check, and if it does not pass, it loses a step. The Mehalas will lose a step if they roll from 4 to 6, and the GFRI, 5 or 6.

Spanish people

Baraka: Fortuna, Divine luck.

  • Use: can be used immediately from the turn that it appears, and thereafter, once each turn.
  • Effects: The Spanish player re-rolls his own dice or those of the enemy in a combat, ignoring the results of the first roll.

The Luftwaffe arrives: the Germans decide to increase the aid of their aviation and bring reinforcements from other fronts.

  • Use: from when it comes out of the pot and for the rest of the game turns.
  • Effects: 2 additional aerial points for the Spanish player (a single point in scenario 2). In both the first and second scenarios, in bad weather, there is 1 aerial point left during that turn.

Nest of spies: German or Spanish intelligence agents discover Allied plans.

  • Use: can be used immediately or saved (hidden), to be used only once, on any odd turn, from when it is available.
  • Effects: the Spanish player randomly steals a chit from the Allies, either those pending to appear or those that he already has ready for use but has not used yet.

Sea lions in the Strait: The Kriegsmarine sends its submarines to attack in the Strait area.

  • Use: can be used immediately or saved (hidden), to be used only once, on any odd turn, from when it is available.
  • Effects: If Spanish control of the Strait has not yet been lost, during the turn this event occurs, the Control of the Strait die roll is canceled. If the Allied player already controls the strait, then Allied naval support points are removed from play on that turn.

Dissensions in the Axis: Spanish and German commanders encounter great difficulties on the ground to understand each other and cooperate effectively with their respective forces.

  • Use: it takes effect from the moment it is taken out and for the rest of the game.
  • Effects: where Spanish and German units are stacked together. These when defending or attacking, will have a penalty of +1 MD or -1 MD in combat.

Spanish initiative: the Spanish commanders manage to "catch the Allies on the wrong foot" and have the initiative temporarily.

  • Use: can be used immediately or saved (hidden), to be used only once, on any odd turn after it becomes available. Exception: if it comes out on the first turn of scenario 1, it cannot be used and must be saved for another odd turn where the Spanish player can play his events.
  • Effects: the Spanish player goes first that turn in the operations phase, both in movement and in combat.

11. Control of the Strait of Gibraltar

The Allied player controls the Atlantic and the Mediterranean Sea, but has to roll 1D6, to determine if the Allied forces succeed in forcing the opening of the Strait of Gibraltar (mainly to destroy the artillery of the Spanish coast but also with the enemy naval and air units in the area), and allow the entry of supplies and soldiers through it. This roll depends on the turn the game is in, who is in control of Tangier and Ceuta, the Allied air points and the weather. With a roll equal to or less than the indicated number, the Allies gain control of the Strait, enough to allow naval movement between the Atlantic and the Mediterranean.

Strait of Gibraltar control table (Turn / Result)

TurnResult
11
22
3 & 43
5 & 64
7 & 85
9 & 106

If the Allied player has taken Tangier or Ceuta, they have -1 MD for each.

If he dedicates 1 aerial point (and only one), to this roll, which he cannot use later on in the turn, he gets -1 MD.

In bad weather +1 MD.

Once the Mediterranean is open, it is no longer necessary to roll for it, and it is considered open for the rest of the game.

The printed rulebook repeats the final sentence of this section twice; it is given once above.

12. Supply

12.1. Supply Sources and Requirements. In order for units to receive the necessary supplies and to be able to operate to the best of their capabilities, it is necessary to draw a line of any number of hexes from a valid supply source to the units, which is not interrupted by units or by enemy zones of control (see point 7.2 ZOC and supply), nor impassable hexes. We will call this line the Supply Line (SL).

Valid sources of supply are:

  • The city of Port-Lyautey for all Allied units.
  • The Beachhead for British units after a successful landing.
  • The city of Taourirt for all Allied units, after they take control of the Strait of Gibraltar.
  • The cities of Ceuta and Melilla for the Spanish and Germans.

Errata note: the source text prints "Tadourit" for this city; the map errata confirm the correct name is Taourirt, and the spelling is corrected throughout.

12.2. Out of Supply: If the CGs / HQs or units cannot trace a valid SL to a supply source, they will be out of supply. The effects of being out of supplies for combat units are that their attack and defense factors will be halved, and CGs / HQs will lose their support factors. Additionally, units with 4 or 5 MP have their movement capacity reduced by half.

Supplies are checked in the administrative phase, and the state the units are in will be maintained until the end of that turn.

12.3. Limited offensive supply. The Allied player, as long as he does not have control of the Strait of Gibraltar, and with respect to the attacks he wants to carry out on an enemy hex in, or east of the X, 13 hex column, will have a penalty column on the Combat Table in each one of them. This restriction will be lifted on the following turn after taking control of the Strait of Gibraltar.

In the British landing as long as the Strait is not controlled (scenario 1), or its units cannot trace an SL to Port-Lyautey, they will suffer the same restrictions in their offensive combats. Similarly, if he can trace an SL to Port-Lyautey, but the Strait is not under Allied control, if hexes east of X, 13 are attacked, he will continue to suffer from offensive restrictions.

The Spanish player, due to the lack of offensive capacity of his forces, can only launch one attack per CE (Army Corps) and turn.

13. Reinforcements, Replacements, Fortifications

13.1. German reinforcements arrive in this segment of the game as specified in scenario 1.

13.2. The replacements will arrive each turn, starting from the second turn, in the following way, and they are distributed in such a way that the opponent cannot know it (by writing them down on a piece of paper, for example) until they have both been put into play.

  • Spanish: 1 efficiency step 1, and 1 efficiency step 2. CG / HQs are recovered if they are eliminated in the manner explained in their section. When Spain loses control of the Strait of Gibraltar and 4 cities, it stops achieving efficiency step 2, and when, in addition, it loses 6 cities, it does not receive the efficiency step 1 that was left over from replacements. Mehalas and German units cannot receive replacements.

  • Allies: receive 2 replacement points, with which they can:

    • a) Recover or bring from the eliminated steps quota an infantry step of efficiency 2 for each point.
    • b) Recover or bring from the eliminated ones a step of armored units for the 2 points.

    Efficiency 3 units cannot recall steps. The CG / HQ are recovered if they are eliminated in the manner explained in their section.

    In the specific case of the British, they can receive replacements once control of the Strait of Gibraltar is in Allied hands or they can draw an SL to Port-Lyautey. Before that they cannot receive replacements.

To receive replacements units must be in supply. If not, they cannot receive them.

Each replacement step serves to recover a step of reduced units, but also to bring eliminated units back into battle. Units rebuilt after being destroyed, return to the same hex as their CG / HQ, or adjacent to it, provided they are not in an enemy ZOC not negated by the presence of a friendly unit. Also in the event that the CG / HQ has been eliminated and is not present on that turn.

  • The Spanish player will place the unit in Tetouan, Tangier, Ceuta, Villa Sanjurjo or Melilla, depending on the CE to which they belong, IX in the first three cities and X in the second two, to be chosen by the player.
  • The Allied player will place them in Port-Lyautey, Meknes or Fez for the Western TF, or in Taourirt or Taza for the Central TF, and in any of them (in case of failure of the amphibious invasion or that an SL can be drawn to Port-Lyautey or Taourirt), or on a beachhead (in the event of a successful amphibious landing), in the case of the British.

Replacement points cannot be saved for other turns.

13.3. Fortifications can only be built and used by the Spanish player. During deployment, you can place 5 of them anywhere within your territory, even adjacent to enemy units, (historically there were some in the border areas with the French protectorate). Then, during even turns (to represent the duration of building of these defensive positions), he can build one and place it in a hex controlled by him still adjacent to enemy units. These fortifications provide -1 MD and can also accumulate other terrain effects.

More than one fortification can be placed per hex, their effects being cumulative, although it must be taken into account that the maximum die modifier for the defender is -3 MD in any combat, (see point 16.3 of these rules, Combat Modifiers).

Operations phase

14. Amphibious Invasion

At the beginning of the game, during the deployment, the Allied player decides the coastal hex (represented on the map with a lighter blue color), which he wants to invade by means of an amphibious assault on the Mediterranean coast of the Spanish Protectorate. (Note that the hexagons of cities cannot be assaulted).

He can carry this out in the amphibious invasion segment (mandatory) of the first turn, and only with British units, (see point 18.2 of these rules for the peculiarities of the amphibian invasion in scenario 2).

The maximum number of units that can do this are 2 brigades of the 4th Division, to be chosen by the Allied player, plus the Commando unit.

Once the friendly player declares that he is carrying out the invasion and designates the target hex, if there are enemy units and he has to fight, the attack factor of the Allied units is reduced by half. But he has a bonus for the artillery support of the fleet of +2 MD.

You can also assign air points and in general all the modifiers for combat apply. They are explained in their corresponding section. If the invasion is successful and the Allied player manages to dislodge the enemy, he may occupy the hex with the units that survived the assault (the Beachhead marker is placed), but he will no longer be able to move or attack further on that turn.

On the next turn, during the replacement phase, the remaining brigade of the 4th Division, the 1st Parachute Brigade (if the Allied player decides to use it that way) and the HQ of the I CE, kept as a reserve afloat on a ship, and they will be able to move and attack during that turn along with the units disembarked in the first turn.

If he fails to push back the defender and take the hex, the British units must return to the adjacent naval hex and the invasion is considered to have failed. The English units will be placed in the hex of the city of Taourirt or adjacent, on turn 4, to be used as one more land unit, without the possibility of repeating the amphibious assault. During that time they cannot receive replacements.

If the invasion occurs in an unopposed hex, that is, without any enemy units in the target hex, the British units eligible for the assault (remember, 2 Brigades of the 4th Division and the commandos) are simply placed in it, next to the Beachhead marker, but they cannot move or attack that turn. The rest of the reserve units afloat on ships arrive as described above as in an assault with opposition.

Units that disembark will be considered in supply in the turn they have done so, and while they remain in it, considering the Beachhead as a supply point, or in the event that it advances beyond it if it can draw an SL to the beachhead. No other friendly units can be sent to the beachhead.

Remember that you can only receive replacements at the Beachhead if the Strait of Gibraltar is controlled by the Allies.

Example of Amphibious Landing

During the first turn of scenario 1, the Allied player has to choose a landing point for the British forces among the Mediterranean coastal areas of the Protectorate, whose coastline is light blue. In this case, the English player is clear that he wants to disembark near Tetouan and Ceuta but hesitates between several options.

The first thing he has done is to choose the units that are going to take part in the assault. The Commandos are a safe bet. Of the three brigades of the 4th Division, he chooses the most powerful, the 21st Tank Brigade, and one of the remaining two, which have equal factors, so he chooses either one of the two, in this case, the 12th Infantry Brigade. With this combination, you have the maximum potential for amphibious landing, with 15 attack factors, halved by landing, to 7 (15/2 = 7.5, rounded down, 7).

He then examines the defending units that the Spanish player has placed first. In 2.6 there is a Legion unit with 4 defense factors with an efficiency of 2, so its base ratio will be just 1 to 1. In 2.7, there are 2 Regulars units, with 6 defense factors. defense and efficiency 2, so again, it's a 1 to 1 ... not very promising. Finally, note that in 3.7 there is a cavalry unit with only 2 defense factors and 1 efficiency, so it will allow you to have a base ratio of 4 to 1 (3 to 1 for the factors, 7/2 = 3 , 5, rounded to 3, and the difference in efficiency, 2-1 = + 1 column), so this option seems much more favorable.

There would be another option, which would be to make an unopposed landing on the other side of the Emsa River, at 4.8, but the Allied player decides to take a risk so as to be as close to Tetouan as possible.

With a 4 to 1, and two naval support points, plus two air support, for a total of +4 MD, the Spanish player can only oppose a -1 for the broken terrain, and decides to use his precious air point to prevent The landing. At the end the Allied player has a +2 MD.

The Ally rolls the die and gets a 2, which, modified by +2, gets a final 4, for a result of 1 / 1R, just to be able to push back the defenders (if he had rolled a 1, modified to a 3, it would not have pushed the defenders back, result 1/2, but since it would have caused the cavalry units to lose two steps, and would have been eliminated, the hex would be vacant, and the Ally could advance and take it).

Thus, the Allied player loses one step of an efficiency unit 2 that he must choose, and takes it away from the 12th Infantry Brigade, while the Spanish loses one step of the cavalry unit, and goes back one hex until Tetouan. The Allied player advances to the now vacant hex and can no longer move or attack that turn, but he can defend himself if he is attacked in the Spanish combat segment.

Place the Beachhead marker to serve as a supply point for the landed English troops.

15. Land Movement

Printed heading reads "Earth Movement"; the rulebook's own contents list gives "Land movement", and the heading is corrected to match.

15.1. Generalities

The forces of one side move in whatever order the player wishes. He is able to alternate units of different TF / CE, without having to first move those of a CG / HQ and then another, etc ...

The units of an army can move by spending their movement points (MP) reflected on the counters, through the hexes on the map, and with the cost explained in the following point.

Remember that, on turns with bad weather, the movement capacity of units with 4 or 5 MP is reduced to 3 MP, and that if these units run out of supplies, their MP is reduced by half.

15.2. The costs of moving through the terrain are as follows:

  • Clear and Broken: 1 MP
  • Half mountain: 2 MP
  • Mountain: 3 MP. For armored units (tanks or tank destroyers), it is impassable terrain, except through the roads that are reflected on the map.
  • Roads: ½ MP for CG / HQ and units with 4 or 5 MP of movement capacity, and 1 MP for the rest.
  • Cities: Use the other terrain present in the hexagon.
  • Rivers: +1 MP for crossing the river hex face, except on a road.

For movement, the effects of enemy ZOCs must also be taken into account, see 7. ZOC of these rules.

See Movement Table, located below the game plane.

16. Combat

16.1. Generalizations

In this segment is where the combats that the active player wants to carry out are resolved. It is not necessary to declare all of them at the beginning, they are resolved as the player announces them, but once announced, they must be done.

A hex can be attacked from one or more adjacent hexes. The attacker can choose to attack with one, some or all units from those adjacent hexes, while the defender must defend himself with all units present in the target hex.

US and British Army units cannot attack the same target in combat.

Spanish and German units can attack the same objective and defend themselves in the same hex.

Units cannot attack more than once per turn, (except for exploitation attacks). Enemy units cannot be attacked more than once per turn in the same hex.

Combats are resolved by rolling 1D6 on the Combat Results Table (TRC) where the ratio between attack and defense factors of the units engaged in combat is established. This determines the base column on which to apply modifiers that can vary that column, and also the roll of the dice (modifier of the roll of the dice or MD), which is rolled to know the result of the combat once all the modifiers have been established.

Combats with attacker / defender ratios higher than 6 to 1, are resolved in the 6 to 1 column, and with final ratios lower than 1: 2 it is not possible to launch an attack.

Errata note: the printed errata for the Combat Results Table substitute the last two values of the 6-to-1 column (for a modified roll of 7 or 8) with "- / 4". The table is printed on the game's tables sheet and is not reproduced in this rulebook text.

16.2. Combat sequence

  • The attacker's attack and defender's defense factors (ATA / DEF) are counted, and a base relationship is made between them, dividing the former by the latter. (Remember to take into account the effects on landing and attacking across rivers). Following the rounding rule, which is done on stackings where the ratio is rounded down. For example, a ratio of 17/5 is equal to 3/1.
  • The ratio of the ATA / DEF base column is modified if attacking from 4, 5 or 6 hexes as indicated in point 16.3, by enveloping attack.
  • The greatest number of steps with an efficiency given by each side are taken into account and the base column of the ATA / DEF ratio is modified if pertinent.
  • Modifiers for the terrain or fortifications are applied, modifying the ATA / DEF column or the die (MD) according to the type of terrain of the target hex of the attack.
  • The appropriate MDs are applied on the aviation, naval and / or CG / HQ supports.
  • The die is rolled (1D6).
  • The results are applied, with the withdrawal (possible last stand defense), the advances and the exploitation.

16.3. Modifiers for combats

  • Efficiency difference. This is determined by the efficiency factor that contributes the greatest number of steps to combat from each side, including those of the HQ / HQ units (if the latter is providing its support factor). If the number is the same for one side, then the player chooses which efficiency he wants to use, taking into account that it will be a unit with that efficiency that will absorb the first casualty, unless special abilities such as legionnaires or engineers are used. in combat, in which case, the first casualty is absorbed by these units, as explained later in the results of the Combat Table. The difference is the number of columns in favor of the one that is greater. Thus, an efficiency 3 versus an efficiency 1 will have a 2 column bonus.

    Example: in a combat there are 4 efficiency steps 2, and 3 efficiency steps 3, against 2 efficiency steps 1 and 2 efficiency steps 2. Thus, the first player has to use efficiency 2, since it is the one with the highest number of steps of his troops participating in combat, while the second player can choose, being the same number, if he wants to use his efficiency units 1 or 2 to determine the combat modifier.

    Note. Use the efficiency of the Paratrooper Regiment (FJR) or German Mountain Regiment (GJR) as 3 or 2 as appropriate to the Spanish player.

    Example: if there is a Spanish stacking with 4 efficiency steps 1, 2 efficiency steps 2, and 3 efficiency steps 3 (the FJR), according to the rules on the efficiency modifier, stacking, it should have an efficiency of 1, by being the efficiency with more steps (4), but since the Spanish player can use the efficiency of the FJR as 3 or 2, if he chooses to use it as efficiency 2, then it turns out that there are 5 efficiency steps 2 and 4 of efficiency 1, so that the efficiency to be taken into account in that stack will be 2 and not 1. Similarly, if there is a stack with 3 steps of efficiency 2 and another 3 steps of efficiency 3 (the FJR), the Spanish player can choose to use the ef. 3 of the German unit as stacking efficiency.

  • Terrain (always in favor of the defender):

    • Clear: no effect.
    • River: Units that attack across a river have their attack factors halved (even if there is a road).
    • Fortification (for each one): -1 MD (not exactly for the terrain, but for clarity it is included here).
    • Broken: -1 MD
    • City: -1 column.
    • Half mountain: -1 column.
    • Mountain: -2 columns, (tanks and tank destroyers cannot attack a mountain hex if it is not through a road).
  • Supports. They will be designated first by the attacker and then by the defender:

    • Aviation (air points): +1 MD or -1 MD for each air point used in combat with a maximum of 3 points per side and combat. Each point can only be used once per turn. They are affected by bad weather.
    • Naval support: can only be used by the friendly player and once per turn. They are used as DM and there is a +1 for the hexagons bathed by the Atlantic, from Larache to Tangier, and another +1 for those bathed by the Mediterranean, from Ceuta to Melilla. On the first turn, during the amphibious invasion segment, support will be +2 MD and then you will no longer have naval support during that turn's combat segment in the Mediterranean. When control of the Strait of Gibraltar is in Allied hands, this naval support can also be used between Tangier and Ceuta, and the MD can be added as a +2 MD in any coastal hex, or continue to be divided into two +1 MD. Remember that in bad weather there are no naval points.
    • CG / HQ support: +, - 1 or +, - 2 bonus MD for fighting in attack or defense with the CG / HQ stacked with the units participating in the combat, or at a maximum of 1 or 2 hexes away, of the combat target hex, provided the units are in supply. Remember that this support is valid for the entire turn, that is, it can be used in an attack of the player's own phase, and then used in a defensive combat of the enemy phase.

    The maximum of MD applicable by the set of modifiers to a combat, is 6 for the attacker and 3 for the defender.

  • Other combat modifiers:

    • Enveloping attack: attack from 4 hexagons = +1 column / from 5 hexagons = +2 columns / from 6 hexagons (totally surrounded) = +3 columns.

Errata note: the printed errata delete point 5 of the left-hand column of the combat modifiers ("if the proportions between the factors ...") and state that the text of the rules on the assignment of cancellations is better than the wording printed under the table. Both are on the printed tables sheet, not in this text.

16.4. Air support

Air support is reflected in the game in an abstract way. Thus, the air power of both parties is represented in the form of air support points, and they represent the different squadrons of fighter, attack and bomber aircraft. As already explained, they provide +1 MD for each one used in combat and with a maximum of 3 points per combat and side.

The Allied player will have 6 air support points available each turn, and the Spanish 1 point per turn (this may change due to events and in scenario 2). The control is carried out with the air point marker located on the game plan and which moves as the air points are "consumed".

They can be used in any hex in the game, regardless of where the combat is taking place, meaning there is no range to calculate. Being support forces, they cannot attack by themselves, if not in support of a combat between ground units, and they recover each time a new turn begins, always taking into account the weather.

In bad weather, they are reduced to 2 for the Ally and 0 for the Spanish.

16.5. Last Stand Defense

The defender in city, mountain, and half mountain hexes may attempt to avoid a retreat result by using an all-out defense. This is done with the roll of 1D6 and if the result is equal to or less than the sum of the modifiers to be applied, then he can avoid the retreat, but assumes the loss of one more step (among the most efficient present). If he is unsuccessful, he has to withdraw, although he does not lose the step.

Modifiers:

  • If there are between 6 and 10 steps in the defending hex: +1.
  • If there are half or more efficiency steps 2 or higher in the defending hex: +1.
  • If there is a CG / HQ in the defending hex: +1.

Example: A defender who has to retreat from a city where he has 10 steps, more than half efficiency 2 and with a CG / HQ present, adds +3, so if he rolls a die and gets a 1, 2 or 3, you can cancel the withdrawal by losing an extra step.

Example: A defender in a mountain hex, with 4 steps, where 3 are efficiency 1 and there is no CG / HQ, then he cannot avoid retreat, since his modifiers do not even add up to 1 in order to have a chance.

16.6. Combat table and results

  • The first step of the casualties is for a unit that has used its special abilities, (engineers or legionnaires).
  • If units with special abilities have not been used, the first step of casualties go over to the unit whose efficiency has been used by the player to determine the difference in efficiencies in combat.
  • The second step of casualties will be assigned by the opposing player to the enemy unit that interests him the most.
  • The third, will be assigned by the player himself, without limitations, being able to choose any unit he wants.
  • The fourth step, again by the opposing player, in the same way as before.
  • If one side cannot satisfy all the losses because it has no more steps, the opponent only has to satisfy the same or less than his opponent depending on the result.

Example: On a 2/2 result where the attacker has 3 steps and the defender 1, the defender will lose his only step, but the attacker will not lose two, but only one. In the same case and if the result was 1/2 then the defender would lose his only step, but the attacker would not lose any.

16.7. Withdrawals (or Retreats), advance after combat and exploitation

  • Withdrawals: they are 1 hex and moving away from the attacking enemy units, and whenever possible it must be towards territory controlled by their side. If you can only go for one hex in an enemy ZOC, but which is empty, you can (remember: as long as there is no other option), but you will lose an extra step.

    In retreats, one's own units negate the ZOC if they are physically in them, and check in order to see if they take another retreat loss in an enemy ZOC.

    If the enemy hex (s) (the only ones possible) are occupied by opposing units, the retreating defenders are automatically eliminated.

    Units that have retreated, and that do so to a vacant hex or with friendly units, may be attacked again by units that exploited the previous combat, and will defend themselves with their full defense factor. If they retreat to a vacant hex, an enemy unit (s) that did not participate in the previous combat may not attack those retreating units.

    If the retreat takes them to a hex with their own units that will be attacked in another subsequent combat, the previously retired units do not add any defensive value, and if they are forced to retreat again, they lose an additional step.

    Remember that if, with the result of retreat (R), if the defender is in a mountain, half mountain or city hex, he can stay in the hex if he wishes and successfully performs a last stand defense, but losing an additional step.

    If the only possible option when retreating is to exceed the stacking limits, the unit may retreat one additional hex.

  • Advance after combat: if there has been a withdrawal of the defenders, or the hex has become vacant due to the loss of all the units present in it, at least one combat unit of those that participated in the attack must advance by obligation and occupy the vacant hex. The rest of the units (except the CG / HQ), can advance voluntarily, or stay in the hexagon from which they attacked.

    The printed rulebook repeats this paragraph; it is given once above.

17. End of Turn and Victory Conditions

At the end of the last turn it is determined if the victory conditions are met for each player and what the result of the game is. If victory conditions are reached at the end of any turn, players can agree to end the game or continue to the end.

Victory conditions

Allied Tactical Victory if:

  • It controls 8 cities of the Spanish Protectorate, of which 2 are mandatorily, Tangier and Ceuta.
  • Keeps the road through Port-Lyautey-Meknes-Fez-Taza-Taourirt to the Eastern end of the map free of ZOC or enemy presence.

Allied Strategic Victory if:

  • Controls the 9 cities of the Spanish Protectorate, (it may seem like a small difference compared to the tactical victory, but it is very important).
  • Keeps the road through Port-Lyautey-Meknes-Fez-Taza-Taourirt to the Eastern end of the map free of ZOC or enemy presence.

If you don't get either one, it's a Spanish victory.

Errata note: the source spells the road as "Port Lyuatey"; corrected to Port-Lyautey. The source also writes "ZdC" for the zone of control in this section; it is given as "ZOC" here.

18. Scenarios

18.1. Scenario 1

Represents the most likely option of how the "Backbone" operation would have been carried out, with the allies taking the initiative.

Deployment: On the first turn of the game, players must deploy and place their units as follows, in that order as they wish and without exceeding the stacking limits:

  • Spanish units:

    • IX Army Corps: north of the border between the Spanish Protectorate of Morocco and the French, taking into account that its area of responsibility corresponded to the West of the Protectorate and covered the cities of Larache, Asilah. Alcazarquivir, Chauen, Tetouan, Tangier and Ceuta, and specifically from the extreme west of the Spanish Protectorate to column X, 13.
    • X Army Corps: north of the border between the Spanish Moroccan Protectorate and the French, taking into account that its area of responsibility corresponded to the Eastern part of the Protectorate and covered the cities of Melilla and Villa Sanjurjo, and specifically from the Eastern end of the Spanish Protectorate to column X, 14.
    • Mehalas: they are troops of the Moroccan puppet government of the Protectorate, which are considered for the purposes of the game as Spanish units and under the CE that the Spanish player wants. They can be placed where the Spanish player determines freely. Historically, they had the mission of defending the mountainous area of the Rif together with some regiment of the 52 DI.
    • In Ceuta, Tangier, Tetouan, Villa Sanjurjo and Melilla, there must be at least one combat unit as a garrison at the start (no CG / HQ). They can then move freely, even on the first turn.
    • German units: a sign of German commitment to Spain, the units, 5th FJR and 756th GJR, are considered for the purposes of the game as Spanish units and under the command of IX CE. The paratroopers arrive in the reinforcements segment of turn 2, and the mountain jagers, in the same segment of turn 3. If the Strait of Gibraltar is under Spanish control, the player can choose to have the German units deploy in Ceuta, Tangier or Tetouan (or hex adjacent to this last city), while if it is not, they will only be able to deploy in Tetouan or a hex adjacent to this city, when arriving by air.
  • Allied units:

    • WTF: south of the border between the Spanish Protectorate of Morocco and the French, taking into account that its area of responsibility would correspond to the Western area that would include the cities of Port-Lyautey, Meknes and Fez, specifically between the Atlantic coast of the French Protectorate, up to column X, 12.
    • CTF: south of the border between the Spanish Protectorate of Morocco and the French, taking into account that its area of responsibility would correspond to the Eastern area that would include the cities of Taza or Taourirt, specifically between column X, 13 and the Eastern boundary of the map.
    • The British I CE must be placed at the beginning of that first turn, adjacent to any Mediterranean coastal hex controlled by Spain, from Ceuta to Melilla, excluding city hexes, that it wants to assault by means of an amphibious invasion in the Mediterranean Sea, (see Amphibious Invasion, 14).
  • Optional rule: British paratrooper assault. The Allied player can, at the start of the game, choose whether he wants to use the paratrooper brigade as reflected in the standard rules (see 14, Amphibious Invasion), or use the paratrooper brigade divided into its 3 battalions. If you choose the latter, the paratrooper battalions will not arrive as light infantry at the landing, but must enter the map (they are supposed to be off the map, in Algeria), by means of a paratrooper assault, at the beginning of the Allied movement phase of the turn chosen by the player, including (but not necessarily) at the start of the amphibious landing.

    A maximum of two battalions can be launched per turn, in clear or broken terrain (not in the city), and it will consume 1 air point for each battalion that is launched in that turn, but cannot later be used as an air point of land support in that same turn, (representing the cost and diversion of the logistical resources necessary for the operation).

    On the turn they land, they cannot attack, but they can defend themselves and move with a single point of movement (MP). From the next, they can operate normally. In bad weather, no skydiving jumps can be performed.

    The battalions will be in supply on the turn they jump, but from the next turn, they must draw a normal supply line to avoid being out of supply.

    The procedure to perform the launch is as follows: a hex is selected where the jump is to be made and the dispersion factor of the jump is calculated depending on the terrain, +1 with broken terrain and +1 if there is an enemy ZOC. A D6 is rolled and if the result is equal to or less than the jump dispersion factor, the battalion is considered to have made a dispersed jump and is at the mercy of the defenders, losing the unit for the rest of the game. A check is made for each battalion that jumps.

    Example: the Ally decides to launch the 2 battalions in the same turn, paying 2 air points, in a hexagon of broken terrain and in an enemy ZOC. He must pass a check on a 1D6 roll, and with a 2 or less (+1 for enemy ZOC and +1 for broken terrain), the battalion making that roll is eliminated for the rest of the game. It may happen that one battalion passes the check and the other does not. If on the other hand the jump takes place in a clear terrain hex and there is no enemy ZOC, the paratroopers arrive safely and simply drop into the target hex.

Combat example. The assault of Larache.

The city of Larache, garrisoned by 2 Spanish units of the IX CE: the 58th RI and the 2nd Ter Leg (reduced to 2 steps), both from the 91st DI, suffered the assault of 3 Allied units of the Western TF: the CCB of the 2nd AD, the 70th Tank Btl and the 7th RI of the 3rd ID, all of them North American. All the units present are supplied (the units in Larache are thanks to the presence of the GFRI 3).

The first thing is to calculate the base relationship between the attack and defense factors of the contestants. On the Allied side: 10 + 3 attack factors for the armored units of southern Larache, while we add 2 attack factors for the infantry regiment of the southeast (5 divided in half, for attacking across the river, and rounding down), for a total of 15 attack factors. While in the target hex of the attack, the Spanish units add 5 defense factors, thus establishing a base ratio of 3 to 1 (15/5 = 3). Only attacking from 2 hexes, then no enveloping attack occurs.

Next, the difference in efficiency between the units of each side is verified. They only attack with units of 2 efficiency, therefore this will be used, while the Spanish have 2 efficiency steps 2 (the Legion unit), and 2 efficiency steps 1, (the 58th RI). Now the Spanish player, having the same number of steps of one efficiency as another, can choose which efficiency to use. He chooses efficiency 2, which does not make him modify any column against it, since if he had chosen efficiency 1, now the relationship in the Combat Table would be 4 to 1 (efi.2 - efi.1 = +1 for the attacker). But on the other hand, if the Spanish player has to take losses, the Legion unit will be the first to suffer a loss step, even if it did not use its special ability bonus. Therefore, the ratio remains 3 to 1 in favor of the attacker.

Next, the modifiers are checked for the terrain, and we see that only the city is applicable, and therefore, the relationship is reduced by one column, remaining at 2 to 1.

Finally, we place the support modifiers, first the attacker, who uses the 2 support points of his HQ (located 2 hexes away), plus a naval support point, and 3 air support (the maximum of air support points per attack), for a total of +6 MD (the maximum allowed for an attack). Afterwards, the defender can only use the -1 MD modifier of the Legion unit, which he decides to use, since in any case, the first loss would be for it. He cannot use the -1 of its HQ, as it is more than 1 hex away, meaning it must be adjacent to use its modifier. Therefore, it will be a fight in the column of 2 to 1, and the resulting MD to be applied will be +5 in favor of the attacker.

The die is rolled, and a 3 is obtained, which is modified to an 8, by applying the +5 MD, and the final result is 1 / 2R.

The Allied player chooses to lose a step in the 7 RI, and the Spanish player, whose first loss must be that of the Legion, for having used his special ability, while the second is chosen by the Allied player, and decides to remove another step of the 2nd Ter Leg, eliminating the unit entirely. The 58th IR must also retreat, since it does not meet any of the modifiers that would allow it to make a roll for last stand defense even if it so wishes, despite being in a city. The Spanish Regiment retreats towards the hexagon where the GFRI 3 is and does not lose an additional step because the ZoC that the Allied 7 RI would exercise, is negated by the presence of the GFRI.

The Allied player advances with the armored units and both enter Larache. If he wished, he could make an exploitation attack, (only armored units), but seeing that his attack factors would be halved for attacking across the river (13/2 = 6.5 for a final round of 6), that they cannot receive support in this type of combat, and that the Spanish player has 5 defense factors, he considers that a 1 to 1 ratio without any MD is too risky for his valuable armored units. Therefore, with the taking of Larache and the destruction of the Tercio de la Legion in exchange for a step from an infantry regiment of his own, he accepts the result and goes on to the next.

18.2. Scenario 2

Spain takes the initiative. Spain and Germany are ahead of the Allies and take measures for a better defense of the Spanish Protectorate of Morocco. In this scenario, the following variants are used:

Deployment:

  • British: The British landing will take place as explained below: the Strait of Gibraltar is considered closed before the British fleet with the units of the I CE can cross it, making it impossible to disembark in the Mediterranean until the Strait is open. The allies can disembark from Turn 2 on the Atlantic coast, south of Tangier (they cannot disembark in cities, so they will only be able to disembark in hexes 2,3, 4,2 or 6,2), or wait for the Strait to be open and disembark in the Mediterranean on the next turn after this occurs. You cannot disembark in bad weather.
  • North Americans: Deployed in the sectors as explained in scenario 1, but they must be in, or adjacent to one of the cities that they control at the beginning in Morocco.
  • Additional German units: the Germans have a large a Kampfgruppe (KG) in Morocco, and in addition to the units referred to in scenario 1, the 754th RI / 334th DI, and the 1st Panzer Battalion, 25th Reg. Pz, from the 7th D. Pz (I / 25th / 7th PzD). The entire KG is deployed from the beginning of the game, located in the area of responsibility of the IX Spanish CE and under its command.
  • Control of the Strait: to control the Strait of Gibraltar, the Allies will have a +1 MD given the greater German involvement in the fight in the form of air units and submarines.
  • Air points: Spain will have 2 air points from Turn 1 due to the arrival of a greater number of German planes, but in bad weather they will still remain at 0. The Allies keep the 6 air points.

19. Optional Rules

19.1. A more severe winter

The winter of 1942-43 will be assumed to be somewhat harsher, and therefore there will be a greater chance of adverse weather. Add +1 MD to the rolls each turn to determine the weather. This is to the benefit of the Spanish player.

19.2. Limited Intelligence

To simulate the fog of war, players will only be able to examine the top tile of any enemy stack. When a combat has been declared, (which must be carried out obligatorily), all the pieces of the stack can be observed to determine the ratio between attacker and defender. As the Allied player is the one who is going to attack the greatest number of times, this rule mainly benefits the Spanish player.

List of acronyms used

  • CCA/CCB: Combat Command A/B
  • CE: Army Corps
  • TF: Task Force, WTF (Western), CTF (Central)
  • RI: Infantry Regiment (IR Infantry Reg.)
  • GFRI: Group of Indigenous Regular Forces
  • Ter Leg: Tercio of the Legion
  • ParaB: Parachute Brigade
  • Eng Reg: Engineer Regiment
  • Tank Btl: Tank Battalion
  • Tank Bde: Tank Brigade
  • Inf Bde: Infantry Brigade
  • FJR: Fallschirmjager
  • GJR: Gebirgsjäger
  • HQ: Headquarter
  • MD: Die modifier
  • ZdC/ZoC/ZOC: Zone of Control
  • PM / MP: Movement Points
  • LS / SL: Supply line