RulesPal
Chat
Rulebook
Maciejowice 1794 thumbnail

Maciejowice 1794

Maciejowice 1794 Rulebook

Table of Contents

Table of Contents

  • 2.0 Components
    • Table of icons on the counters
  • 3.0 Gameplay
  • 4.0 Commanders
  • 5.0 Facing
  • 6.0 Stacking
  • 7.0 Formations
  • 8.0 Movement
  • 9.0 Reaction on Enemy Movement
  • 10.0 Ranged Combat
  • 11.0 Melee Combat
  • 12.0 Victory Conditions
  • 13.0 Scenario

2.0 Components

Each game of „Maciejowice 1794” contains:

  • a rule book;
  • a map 68 x 98 cm representing terrain of the battle with road network and buildings existing then. There is a hex grid imposed on a map to regulate movement of units and to distinguish distances between them.
  • set of 432 counters consisting of both combat units participating in battle and markers;
  • 10-sided dice.

[2.1]. Scale of the game. One turn represents 15 minutes of the real time. One hex of the map represents area of ca. 100 meters. Counters depict three kinds of units, dominating the battlefield of that era - infantry, cavalry and artillery. Infantry units are organised in companies, cavalry in squadrons. One artillery counter represents from 2 to 8 guns. One size point equals 35 soldiers.

[2.2]. In the game of „Maciejowice 1794” all the random events are decided by a ten sided dice. A result of “0” should be treated as “0”, not “10”.

Table of icons on the counters

Russians - green background. Poles - blue background.

RussiansPoles
general FersenCommander-in-Chief Kościuszko
commandercommander
grenadierinfantry
musketeershooter
jagerkosynier (infantry armed with scythes)
dragoonvolunteer
hussarcavalry
horse jagerhorse volunteer
carabineerartillery
cossack
artillery

Following picture should explain markings present on the counters: (illustration in the printed rulebook, not reproduced in text)

3.0 Gameplay

[3.1]. Players should agree on who will lead which side - there are two armies: Polish and Russian. Before beginning the game, units should be set up on hexes designated by the numbers present on the counters. Activation markers (those with question mark) should be put in an opaque container, like cup, as they will serve as Activation Pool.

[3.2]. To help players, game is divided into 24 Game Turns. Each Turn consists of several rounds during which players execute certain actions. When all the described actions are finished, the TURN marker needs to be moved onto the next space on the turn track. The game finishes at the end of 24th Game Turn or if one of the players fulfils conditions of an automatic victory.

[3.3]. Each Game Turn consists of the following actions:

  • Round 1: Creaction of Activaction Pool (see 13.0 Scenarios). The remaining commander counters are to be retained by their respective owners and kept hidden from the other player.
  • Round 2: Either player draws a Commander chit from the Activation Pool and performs the actions described below in Phases One through Five.
    • Note: Players can decide for themselves who draws first.
    • Phase 1. Commander Activation.
    • Phase 2. The “Activated Commander” may now move any and all units belonging to his formation. During this phase, ranged combat, charges and counterattacks may also be conducted.
    • Phase 3. Movement of the Activated Commander.
    • Phase 4. Resolution of Melee Combat.
    • Phase 5. If any “Activation Chits” remain within the Activation Pool, play returns to Round 2. Once the Activation Pool is empty, proceed to Round 3.
  • Round 3. Victory conditions check. If any victory conditions are fulfilled by either one of the players, the game ends. In this Phase, players also change ”Fire” markers – see [10.9.10].

A Game Turn is finished when there are no more markers remaining in the, current, Activation Pool; the TURN marker is then moved onto the next space on the turn record track. The sequence of play now returns to the Round 1 segment.

[3.4]. Definitions used in the rulebook.

  • Identifier - designation of the unit in accordance with historic organisation of the given army.
  • Morale - number on the counter representing training and motivation of the unit. The higher morale, the better unit is. Morale can be lowered because of losses.
  • Size - number on the counter designating how many soldiers were present in the unit.
  • Firepower - rating on the counter representing unit capabilities in ranged combat. It is not always equal to Size as sometimes some soldiers in certain units did not have rifles.
  • Losses. As result of Melee or Ranged Combat a unit can sustain losses. To designate current Size and Firepower, players need to use markers -1/-2. Units suffer losses as explained below.
SizeLosses assertion
6fornt side -- „-1” -- „-2” -- back side -- „-1” -- „-2”
5front side -- „-1” -- „-2” -- back side -- „-1”
4front side -- „-1” -- back side -- „-1”
3front side -- „-1” -- back side
2front side -- back side
1front side

Front side is always printed with unit’s starting hex. When unit cannot sustain any more losses, it is eliminated and removed from the play. Markers themselves do not reduce Morale rating.

Example: 1/I/15 pp, with ratings of 5 for Morale, 5 for Size and 5 for Firepower, suffered a loss. It is covered with a -1 marker and its Size and Firepower becomes 4 (5-1=4). Morale is left unchanged.

  • Modifier - a number deducted or added to the result of a die roll.
  • Morale Check. the player should roll a die and calculate the final result using applicable modifiers. If the final result is lesser or equal to the Morale rating, the morale test is passed. Artillery and commanders do not take Morale Checks.
  • Movement Points - representation of unit’s ability to move (see [8.0]).
  • Melee hex - a hex in which units from opposing sides are present. They are assumed to be in close combat.
  • Rounding. During calculations necessary for gameplay, fractions should be rounded as follows. Fractions from 0,01 to 0,49 are rounded down - from 0,5 they are rounded up.

4.0 Commanders

[4.1]. The coloured strip on the unit counter designates which commander can command any given unit.

[4.2]. A unit is considered as ‘In Command’ if it is located no further than 4 (four) hexes away from its commander. When calculating this distance, hexes occupied by enemy units cannot be used (though Melee hexes can be used). An ‘In Command’ unit is eligible to perform actions in Phases 2 and 4.

[4.3]. If a commander is eliminated, units from his command are placed under the command of the Overall Commander. In such cases, the OC loses the ability to activate any other commander (see [4.4]) and has to command the units of the fallen commander. If two or more commanders are eliminated, the player has to decide during OC activation ([4.2] applies here) which units he will command in this activation. Commanders cannot command units from different Commands.

[4.4]. Kościuszko and Ivan Fersen. These two commanders are Overall Commanders of their armies - Polish and Russian, respectively. Special rules apply to these commanders, as set out below:

  • a) when Ivan Fersen is activated, the player leading the Russian army can choose ANY Russian commander;
  • b) when Kościuszko is activated, the player leading the Polish army can perform actions in order specified below:
    • activation of ANY Polish commander,
    • perform actions belonging to Phase 2 and 4 with any six units within 4 hexes from Kościuszko counter,
    • perform movement of Kościuszko.

[4.5]. Polish reserve. Polish units belonging to the reserve are subject to special rules. Their formation bar is multicolored. All Polish Leaders can command them (though see [4.2]) with the exception of General Poniński. A Leader can command all or some of the units in reserve.

[4.6]. A commander is permanently removed from map when:

  • all units in his command will be eliminated or
  • unit with which he was stacked is eliminated or
  • the commander is killed in Melee or Ranged Combat.

[4.6.1]. If Ranged Combat is being resolved by an Infantry unit using row “4-5” or row “6 and more” against a hex with a commander present, after applying the result the player must check for possible Commander Casualty and roll a die:

  • 0 – means death. Commander counter is removed from map, never to return;
  • 9 – contusion. Commander counter should be removed from Activation Pool. He cannot be activated that turn unless he was activated already;
  • from 1 to 8 – no effect.

[4.6.2]. If Ranged Combat was resolved by Artillery from distance of 3 spaces or less against a hex with a commander present, after applying the result the player must roll a die and follow the procedure explained in [4.6.1].

[4.6.3]. If a 9 is rolled on the die during Melee resolution against a hex with a commander present, after applying the results, the player must roll a die again and follow the procedure explained in [4.6.1].

5.0 Facing

In “Maciejowice 1794” units must be properly positioned on the map. The illustration below shows the proper positioning of the counter in the hex. (Illustration in the printed rulebook, not reproduced in text.)

[5.1]. Commanders do not have a facing, nor frontal, flank and rear zones.

6.0 Stacking

Whenever units belonging to one army (Polish or Russian) are in one hex, a stack is created. A unit that joins the stack should be placed at the bottom of the stack. The sequence of units in the stack can only be changed in the Movement Phase - it costs all units 1 Movement Point. All units in a stack must have the same facing. Exception: Artillery units, which can face any hexspine.

[6.1]. After each Phase of the Round 2 is finished, no hex can be occupied by both infantry and cavalry units.

[6.1.1]. Cavalry units can move through hexes occupied by infantry (reverse is also true) – the only exception is [6.4]

[6.1.2]. Infantry and cavalry units cannot counterattack together – see [8.15]

[6.2]. Stacking limits:

  • Infantry with Size of 20 or
  • Cavalry with Size of 4 or
  • Artillery and Infantry with Size of 10 or
  • Artillery and Cavalry with Size of 2.

[6.2.1]. If a stack of infantry units have Size from 6 to 10 and stack of cavalry 4, then player can decide that those units stack together. Such a stack must be covered by a ”Line” marker. Properties of a “Line” are as follows:

  • when resolving Fire, Firepower ratings are added together – this is an exception to [6.8];
  • when the stack is a target of Fire or Artillery Fire, only the unit at the top of the stack is subject to the effects of that Fire - this is an exception to [6.10].

[6.3]. In the Movement Phase units can pass through friendly units but must pay 1 additional Movement Point. They do not have to pay additional MP when they:

  • pass through a hex occupied solely by commander or
  • join an existing stack.

[6.4]. Units cannot pass through hexes if by entering them stacking limits would be exceeded - see [6.2].

[6.5]. Commanders are not restricted by stacking limits - they can pass through or enter any hex occupied by friendly units.

[6.6]. Markers have no effect on staking limits.

[6.7]. Units stacked together have to resolve Melee together - their Size should be added together.

[6.8]. Only the unit at the top of the stack can perform Rifle Fire. Exceptions - Artillery unit can always Fire, regardless of its position in the stack and units in Line, see [6.2.1]

[6.9]. Only a unit at the top of the stack can be the target of Rifle Fire.

[6.10]. All units in a hex are subject to effects of Artillery Fire (exception - see [6.2.1]).

Example 1: 1/II/2 pp and 2/II/2 pp are stacked together. Artillery Fire results in 1M. Each unit has to test their morale.

Example 2: The same units participate in Melee Combat and are victorious. They suffer one loss and player has to decide which unit will be weakened.

[6.11]. Units of opposing sides can be in the same hex. Entering a hex occupied by enemy unit(s) cost an additional 1 Movement Point.

[6.12]. All units retain their formation (exception - see [7.1]) and facing in a Melee hex. Neither player can exceed the stacking limits [6.2].

[6.13]. Exit from a Melee hex is possible only as result of Melee resolution (see [11.0])

7.0 Formations

In “Maciejowice 1794” units are usually formed in lines. In some cases, though, it is possible to use different formations.

[7.1]. Units cannot change their formation in Melee hex. Exception - forming a square during cavalry charge (see [7.3]).

[7.2]. Skirmish Order. Can be formed by expending 1 Movement Point by Polish Shooters, some volunteer units and Russian Jagers – this ability is denoted by presence of white star on the counter. After forming Skirmish Order, the unit receives a ”Skirmish” marker. The abilities of such a unit are as follows:

  • unit expends one Movement Point regardless of the terrain (+1 MP when entering hex occupied by enemy);
  • unit does not expend any MPs for changing facing;
  • after finishing movement, the facing of the unit must be declared;
  • a LoS can now pass through the unit’s Flank Zones (see [10.2]).

[7.3]. Square. This formation can be created by four infantry companies, if in Clear terrain. The “Square” marker denotes units using this formation. A Square can only be formed in the player’s own Movement Phase and the units forming the Square expend all their MPs. Exiting a Square costs 1 MP - units change formation and adopt any facing.

[7.3.1]. A Square can be created at the moment when enemy cavalry enters the hex. In such cases, friendly units must pass a Morale Check. If it is passed successfully, a Square is created. If not, the unit/stack suffers one loss.

[7.3.2]. Square properties:

  • all adjacent hexes are considered to be in frontal zone;
  • squares can be treated as line (see [8.10]) if they occupy adjacent hexes;
  • in the owners Phase it is possible to move a square by one space in clear terrain (using all MPs);
  • Infantry in square cannot attack;
  • when defending in Melee against Cavalry, there is a +3 modifier;
  • when defending in Melee against Infantry, there is a -1 modifier;
  • in Melee total Size is used,
  • in Rifle Fire only quarter of Firepower is used.

[7.4]. Cossack’s Lava. If a Cossack unit entered an enemy occupied hex through the enemy frontal zone and at least one of the flank hexes are empty, there is a chance of a flank attack. Before resolving Melee, the Cossack unit must pass a Morale Check. If a infantry unit is being attacked, the die roll should be modified by -2. If the test is passed successfully, the modifier for an attack through a flank zone should be applied (see Melee Combat Modifiers Table).

[7.5]. “Kosynierzy” units cannot create squares. When they defend against cavalry, players need to use +2 modifier.

8.0 Movement

[8.1]. Generally speaking, a unit moves by entering one of two hexes in its Frontal Zone.

[8.2]. On entering each hex a unit expends Movement Points (MPs) depending on the types of terrain present in each hex. The cost of different types of terrain can be found in the Terrain Effects Table. Commanders always expend 1 MP, regardless of terrain.

[8.3]. A unit can use all of its Movement Points or some.

[8.4]. MPs cannot be saved for the next Phase or transferred to other units.

[8.5]. Unit can always move by one space, even if MP cost is larger than Movement Allowance of the unit. Move ends after entering such space, though.

[8.6]. A unit can enter one of the hexes in its rear zone by expending an additional Movement Point. A unit cannot enter a hex occupied by an enemy in this way.

[8.7]. If a unit wants to change its facing, it must turn. Turning by 60º cost 1 MP. Turning by 120º cost 2 MPs. Commanders do not change their facing since they have none.

[8.8]. Movement Allowance for different types of units are as follows:

  • Infantry: 4 MPs,
  • cavalry: 8 MPs (Cossack – 9 MPs),
  • Commanders: 9 MPs.

[8.9]. Double time. Before moving an Infantry unit, the player may declare that the unit will use double time. The consequences of double time movement are:

  • Movement Allowance is increased to 6;
  • unit cannot Fire,
  • unit must expend all Movement Points,
  • unit cannot change formation or facing,
  • unit cannot pass through friendly occupied hexes,
  • unit cannot enter Woods, Village hexes or go across River hexsides.

[8.10]. Line. Units of one type that begin their Movement Phase on adjacent hexes in their Flank Zones constitute a Line. A player can “simultaneously” move all units in a Line. This is an exception to [8.16].

Explanation: This rule allows players to coordinate movement and fire of several units at the same time.

[8.11]. Movement of Foot Artillery. In the Movement Phase, after a Commander activation, a unit of foot artillery is able to:

  • change facing however the player wishes - but the unit cannot Fire this Round;
  • move to an adjacent space and assume any facing - but only if the unit did not fire or move this Turn. A hex forbidden to infantry units cannot be entered this way. After moving, it cannot Fire until the end of Turn.

[8.12]. Limbered Artillery. To enable faster movement, a player can Limber Artillery. Such an artillery unit receives a ”Limber” marker. Further movement in that Activation is forbidden. Characteristics of Limbered Artillery are as follows:

  • cannot Fire;
  • has 3 MPs;
  • terrain costs are the same as for cavalry units;
  • cannot enter hexes occupied by enemy;
  • change of facing does not cost anything but after concluding movement, facing must be declared;
  • unlimbering, that is returning to firing order, costs 1 MP. Artillery can Fire in the next Turn.
  • if attacked in Melee, the unit should be treated in accordance with normal rules for artillery units.

[8.12.1]. An artillery unit entering the map during a game (see 13.0 Scenario) is considered to be Limbered.

[8.13]. In the Movement Phase there is a possibility of Melee. Attacking units are charging cavalry or counterattacking units.

[8.14]. Cavalry charge.

[8.14.1]. A charge can take place if cavalry unit (stack):

  • moved at least 3 hexes during its move;
  • did not change facing or Fire
  • did not pass through a woods, marsh or village hexes;
  • did not pass through friendly units (also artillery);
  • did not crossed river hexsides.

[8.14.2]. To resolve a charge, the player must follow the procedure explained in [11.7].

[8.14.3]. If charging cavalry is victorious, it can move further on the condition that it has MPs remaining. It can also charge into another hex.

[8.14.4]. A cavalry unit may attack after performing a charge, regardless of its result, in Phase 4.

[8.15]. Counterattack.

[8.15.1]. If a player decides and is able to make a counterattack (see [9.0]), a chosen unit must be moved into a hex occupied by an enemy unit.

[8.15.2]. Enemy movement is finished and a Melee must be resolved immediately. Counterattacking units are considered attackers.

[8.15.3]. To resolve a counterattack, players use the procedure explained in [11.7].

[8.15.4]. One unit (or stack) may be the target of only one counterattack. One counterattack, however, may be performed in combination by several enemy units (stacks).

[8.15.5]. Any opposing infantry units, meeting the preconditions, may Counterattack only once during an enemy Movement Phase.

[8.15.6]. Cavalry units, meeting the pre-conditions, may Counterattack as many times as they wish during an enemy Movement phase. There are no limits.

Illustration caption: The Russian unit cannot be counterattacked by all the Polish units, because rule [6.1] would be broken. A cavalry squadron can choose one option from [9.1C], but it would counterattack single-handedly. Two infantry units could counterattack together. Each of them would resolve procedure from [9.1A] separately.

[8.15.6]. A counterattack does not influence a Melee Phase in any way. All counterattacked units can attack and all counterattacking units can be attacked.

[8.15.7]. Other units can be moved only after the resolution of a counterattack.

[8.16]. A unit or stack must finish its movement before another unit or stack can be moved. Once a unit has joined a stack, it must end its movement or continue to move seperatley. A unit can only move out of a stack which has not moved only at the beginning of its movement or if passing through.

9.0 Reaction on Enemy Movement

[9.1]. When an enemy unit enters, during its Movement, the Frontal Zone of a friendly unit, the non-phasing player may choose one from the following options:

  • A. Infantry versus enemy infantry. The unit may:
    • hold its ground and fire upon enemy or
    • take a Morale Check. If it is passed, the unit performs a counterattack (see [8.15]). If the Morale Check is failed, the unit must retreat two hexes and suffers one Loss.
    • infantry in Skirmish Order can make a Morale Check. If the test is successful, the unit can Fire upon the enemy unit and remain in the hex or retreat by one hex – the owner decides after Fire. If test is failed, unit retreats by two hexes and suffers one Loss.
  • B. Infantry versus enemy cavalry. The unit may:
    • hold its ground and fire upon enemy.
  • C. Cavalry versus enemy infantry. The unit may:
    • hold its ground and fire upon enemy or
    • perform counterattack (see [8.15]) or
    • retreat two hexes.
  • D. Cavalry versus enemy cavalry. The cavalry unit may choose from the options available under point [9.1A].
  • E. Cossacks can always retreat two hexes.

[9.2]. A unit in the Melee hex cannot choose any option from [9.1].

[9.3]. In the case of stacks, a Morale Check for counterattack possibility is resolved once, using only the ratings of the unit on top of the stack.

[9.4]. Artillery unit can fire upon only enemy units. Any kind of Movement in the enemy`s Movement Phase is not allowed.

[9.5]. Players should move their units in a way that permits w their opponent to react accordingly.

10.0 Ranged Combat

In “Maciejowice 1794” there are two types of Ranged Combat: Rifle (from infantry and cavalry units) and Artillery Fire.

[10.1]. Visibility, which is generally assumed to be possible, is established between two units if a line connecting the point in the middle of their hexes is not passing through:

  • a woods hex,
  • a village hex,
  • a hill hex,
  • a castle hex;
  • other units (except artillery and commanders).

Hexside of the blocking hex also blocks visibility.

Figure caption: Between those two units there is no visibility.

[10.1.1]. Slope do not block visibility.

[10.1.2]. There is visibility between two units, regardless of any obstacles mentioned in [10.1], if both of them are located on hills. In other words, objects in the valley do not block visibility.

Figure caption: There is a visibility between Russian cavalry squadron and Polish „kosynierzy” unit.

[10.2]. The Line of Sight (LoS) is a line connecting points in the middle of two hexes. One hex contains the target unit, the other hex contains the firing unit. A LoS exists when there is visibility (measuring through the frontal zone of a firing unit). Exception: units in open order formation (see [7.2]) which have LoS extending through their flank zones also.

[10.3]. Ranged combat is possible only when LoS can be traced.

[10.3.1]. When the LoS crosses a flank zone or rear of the Target unit, the Morale Check is performed with +1 modifier.

[10.3.2]. When the LoS goes through a hexside between frontal and flank zone, modifier mentioned above is not used.

[10.4]. Players resolve ranged combat taking turns, alternately. The non-phasing player fires first with any of his unit(s) – see [10.9.6]. After that, enemy can move or fire.

Example: In the 3rd Turn General Tormasov is activated. The Polish player can fire one salvo with one unit or units (see [10.9.6]) currently on board. After the effects of that fire have been resolved, the Russian Player can move or fire with a unit under Tormasov’s command or open fire with any infantry or cavalry unit from the Russian army.

[10.5]. If there is an enemy in a frontal zone of a friendly unit, only that enemy can be the target of Fire.

[10.6]. A unit in a Melee hex (see [3.4]) cannot Fire or be Fired upon.

[10.7]. A unit which must Retreat under Fire (see [10.11]) cannot continue its movement. It receives a ”Stop” marker.

[10.8]. Maximum range of Fire depends on type of the unit:

  • Infantry: 3 hexes,
  • Cavalry: 2 hexes,
  • Artillery: 10 hexes.

[10.9]. Rifle Fire.

[10.9.1]. Each unit can Fire four times per Turn. The player must declare his decision to Fire during the Movement Phase and resolve the procedure explained in [10.9.4].

[10.9.2]. A unit firing in its own Movement Phase expend 1 MP.

[10.9.3]. Units that do not have a Firepower rating cannot Fire.

[10.9.4]. Rifle Fire Procedure:

  • a) Firepower should be divided by distance in hexes to the target;
  • b) Result should be rounded in accordance with [3.4];
  • c) On the Rifle Fire Table, the player should find the row corresponding to the result from b) and read the effect of the Fire
  • d) Effect of Fire should be applied immediately.

After firing, the unit should be marked with the appropriate marker – “1”/”2”/”3”/”4” – to denote how many times the unit has fired this Turn.

[10.9.5]. The procedure explained above is not used if the target is an enemy artillery unit not stacked with any non-artillery unit. In such a case, the artillery unit is destroyed and the player receives Victory Points if all the following conditions are fulfilled:

  • distance between target and firer is one hex
  • Firepower is equal to or higher than 3,
  • dieroll result is lower than Firepower.

[10.9.6]. Simultaneous Fire from several units at one target is possible. It is crucial, however, that units of one type only occupy adjacent hexes in their Flank Zones and each unit has LoS to the target (according to [10.2]). In accordance with [10.9.4A], the highest Firepower among the firing units should be considered. Next, the player should apply the result found down the Rifle Fire Table by as many rows as there are hexes from the firing units to the target, minus one.

Figure caption: 1/I/1 pp i 1/I/3 pp occupy adjacent hexes and they fire together at I/Woroneski. Basic row in Table is “2-3”. Because two units are firing, the player should apply the result found one row down - “4-5”. The effect of this fire is 1M. The Russian unit has to pass a Morale Check, but to the die roll the player has to add one (+1).

[10.9.7]. If infantry or cavalry units Fire for the first time, the Morale Check receives +1 modifier.

[10.9.8]. If infantry or cavalry units Fire for the second time, no modifier is used.

[10.9.9]. If infantry or cavalry units Fire for the third or fourth time, the Morale Check receives -1 modifier.

Example, continued: Lets assume that 1/I/1 pp was with marked with a Fire 3 marker and 1/I/3 pp with Fire 1 marker. We use the most beneficial modifier when resolving Fire. 1/Woroneski has to test its Morale. Final modifier in this case is 0 (1{1M}- 1=0).

[10.9.10]. In Round 3 of every Turn, infantry and cavalry units that Fired that Turn receive a Fire 1 marker. To remove that marker in a subsequent Turn, the unit must expend 1 MP in its movement segment after the first activation of the Leader commanding that unit.

[10.10]. Artillery Fire.

[10.10.1]. Every unit of artillery has the same field of fire and its effect is as depicted below.

Figure: artillery field-of-fire diagram, showing hex distances 1 to 10 from the firing gun in bands labelled 2M, 1M and M. The band boundaries are shown only in the printed diagram.

[10.10.2]. The fire of every artillery unit needs to be resolved separately. A player cannot use artillery fire together with fire from any other type of unit.

[10.10.3]. Every unit of artillery can fire:

  • once in the Movement Phase after the activation of its own side’s appriopriate commander, and
  • once in the Movement Phase after each activation of any enemy commander.

In other words, the number of possible Fires depends on number of Leaders in the Activation Pool.

[10.10.4]. As soon as the player declares artillery fire, its effect is immediately resolved. If the result during a Morale test is a ”0” (not taking any modifiers into consideration), the artillery unit cannot Fire anymore that particular Turn. This rule simulates technical difficulties of artillery units.

[10.10.5]. To mark an artillery unit that Fired, its counter must be flipped to the reverse side. At the conclusion of the Movement Phase, artillery units should be flipped to their ”not-fired” side. The only exception is Foot Artillery units that moved during that Activation – see [8.11] and guns suffering from technical problems – see [10.10.4]. Those units can be flipped back at the end of the Turn.

[10.10.6]. Batteries consisting of several guns are depicted with white stars on their counters. Each star modifies the Morale Check by one (+1). This modifier is cumulative with other modifiers.

Example: A Polish two star artillery unit Fires upon a Russian infantry unit 1/I/Kijowski in a village hex from a range of 6 hexes. The Russian unit has to test its Morale with the following modifier +2 (+1 for distance +2 for two stars -1 for village hex).

[10.10.7]. If the target of the artillery fire, at a range of 6 hexes away or less, is a single artillery unit – that is, not stacked with any other type of unit – the player must roll a die. For Polish artillery, the player applies a +1 modifier. If the final result is higher than the distance between the firing unit and the target unit, the player must roll the die again. If the second result is 0 or less, the artillery unit that was fired at should be considered as captured (for Victory Points calculation; see [10.10.10]). In case of multi-gun batteries, from the second dieroll the player has to deduct the number of white stars.

[10.10.8]. A single artillery unit in a hex defends like an infantry unit with a Size of 1. If the attacking player wins the Melee, any guns in the Melee hex are captured (see [10.10.10]).

[10.10.9]. If an artillery unit is stacked with a friendly unit, it does not influence Melee Combat in any way. If those friendly units have to Withdraw, the guns will be captured [10.10.10].

[10.10.10]. Players receive 2 Victory Points (plus the number of any white stars) for capturing the guns and 2 Victory Points for recapturing of one`s own guns. Neither player can fire using captured or recaptured guns – it is assumed that enemy had enough time to damage them.

[10.11]. Retreat. A unit retreats under fire, reaction to enemy movement (see [9.1]) or Morale Crisis (see [11.12]) into one of two hexes in its rear zone.

[10.11.1]. During a retreat, unit does not expend Movement Points nor it can change facing.

[10.11.2]. During a retreat unit can join a friendly stack (the counter must be placed at the bottom of the stack) – the unit must assume the facing of the stack.

[10.11.3]. Unit retreating into a marsh hex, across a river hexside or up a slope must suffer one loss, even if it retreats by a road.

[10.11.4]. A unit suffers one loss if it retreats into a hex in an enemy unit’s frontal zone.

[10.11.5]. A unit cannot retreat off the map or into a hex occupied by an enemy unit. If those are the only possibilities, it is eliminated.

[10.11.6]. A unit is eliminated if it cannot fulfil the conditions specified in [6.1] or [6.2].

[10.11.7]. A commander can retreat by one hex, during any phase, if an enemy unit is about to move into an adjacent hex.

11.0 Melee Combat

Melee Combat happens in Phase 4 of the round and/or in the Movement Phase (counterattack, charge).

[11.1]. Melee Combat can take place only when both enemy and friendly units occupy the same hex. The player must attack all enemy units with all friendly units – Sizes should be added together.

[11.2]. All units under an activated commander, which fulfil conditions from [11.1], must resolve Melee Combat. They are considered to be an attacker.

[11.3]. Any unit can attack or be attacked only once in a given Phase – exceptions: cavalry charge (see [8.14]) and cavalry counterattack (see [8.15.16]).

[11.4]. The active player decides the sequence in which Melees are to be resolved.

[11.5]. The next Melee can be resolved only when the procedure explained in [11.7] has been finished.

[11.6]. Melee Combat Phase is over when the conditions explained in [11.2] are fulfilled.

[11.7]. Melee Combat Procedure:

  • a) the attacking player designates the Melee hex, where resolution will take place (and remember [11.1] and [11.2])
  • b) both players roll a die and apply all possible modifiers – these are found on the Melee Combat Modifiers Table
  • c) modified results must be compared to each other. The side with the lower result loses the Melee. In the case of a tie, victory goes to the attacking side (players have to assume that the difference between die rolls was equal to 1 for purpose of Withdrawal).

[11.8]. Effects of Melee Combat:

  • victorious units suffer one loss, they remain in the hex and can change their facing however they wish. If the difference from [11.7c] is ”6 or more”, attackers do not suffer a Loss at all.
  • defeated units suffer two losses and Withdraw (see [11.11]).

[11.9]. If as the result of Melee a victorious unit is eliminated, the owning player must resolve a Morale Check. If it is passed successfully, the unit does not suffer any losses and remains in the hex. This rule is applied when victorious unit has Size of 1 before the Melee began.

[11.10]. Charge and counterattack are a type of Melee Combat, resolved during Movement Phase.

[11.11]. Withdrawal. Because of defeat in Melee Combat, losing units must Withdraw as explained below:

[11.11.1]. A unit (or stack) must be removed from map and put onto the Turn/VP Track.

[11.11.2]. On the Withdrawal Table the player should find the row with the difference from [11.7.c]. The second column shows when the losing unit can return to the map.

Example: 1/I/7 pp and 3/II/7 pp have lost Melee in 3rd Turn with difference of 4. They will return in 5th Turn.

[11.11.3]. A unit returns to the map at the moment when its commander is activated. A returning unit cannot move. If its commander was not activated, the unit must be moved into the next space of Turn/VP Track.

[11.11.4]. A returning unit must be put into the hex occupied by commander or into any adjacent hex. It cannot be put into Melee hex. If the unit’s commander is not on the map, units return on hexes specified below:

  • Polish Army - hex 2024, 1401 for units under Poniński;
  • Russian Army - hex 0146, 0125 for units under Chruszczow, 0301 for units under Denisow.

If those hexes are occupied by enemy units, the returning unit must be moved into the next space of Turn/VP Track.

[11.11.5]. A unit is considered to be eliminated when it has to return after 24th Turn.

Example: 1/I/7 pp and 3/II/7 pp lost Melee in 22nd Turn with difference of 7. They will not return to the map and are eliminated.

[11.12]. Morale Crisis. The unit has to take a Morale Check when a friendly unit/stack in an adjacent hex is withdrawn from a Melee Hex. If the check is successful, the unit remains in place. If not, it retreates by one hex, in accordance with [10.11].

[11.12.1]. Artillery, Leaders and units occupying a Melee Hex are not subject to the above rule.

12.0 Victory Conditions

[12.1]. Players gain Victory Points (VPs) for:

  • elimination of enemy units by Ranged Combat or Morale Crisis – 1 VP;
  • victorious Melee Combat – 1 VP;
  • capture of enemy artillery unit – 2 VP plus one for each white star on artillery counter;
  • recapture of player`s own artillery – 2 VP;
  • killing of an enemy commander – 3 VP.

[12.2]. The current VP tally should be shown on the Turn/VP Track using “PZ” counter.

Example: The Russian player has 3 VPs. If he loses the next four Melees, the VP marker has to be placed on space 1, on the reverse (Polish) side.

[12.3]. After the resolving last game turn victory goes to the Army whose side is shown on the PZ counter. If PZ marker isn`t present on Turn Track, the battle is considered to be won by Polish Army.

[12.4]. It is possible to end the game before the last Turn. Whoever has 15 VPs at Round 3 of any Turn, wins. Before starting the game, players can arrange other limits for the Victory Points.

13.0 Scenario

The scenario starts with the situation from just before 7 am. The Poles have noticed that the Russian force of General Fyodor Denisov has entered the open space before the Polish left wing. The reserves, the 10th Foot Regiment and combined regiment led by Colonel Antoni Szuszkowski, are quickly transferred to this side of the battlefield. The Russians are attacking.

The starting positions of the Polish units and the units under Denisov are shown on their counters.

  • First Turn: In the First Turn’s Activation Pool there should be only the chit of General Major Denisov.
  • Second Turn: the Activation Pool consists of:
    • Poles: General Major Kniaziewicz;
    • Russians: General Major Denisow;
  • Third Turn: the Activation Pool consists of:
    • Poles: General Major Kniaziewicz, Commander Kościuszko;
    • Russians: General Major Denisow, General Major Tormasow and General Fersen – entry hexes 0144-0149;
  • Fourth Turn: the Activation Pool consists of:
    • Poles: General Major Kniaziewicz, General Major Kamiński, Commander Kościuszko;
    • Russians: General Major Denisow, General Major Tormasow, General Fersen;
  • Fifth Turn: the Activation Pool consists of:
    • Poles: Commander Kościuszko and any two Leaders chosen by Polish player;
    • Russians: General Fersen, General Major Rachmanow (entry hexes 0144-0149), General Major Chruszczow (entry hexes 0120-0130) and any one Leader chosen by Russian player;
  • Sixth Turn: the Activation Pool consists of:
    • Poles: Commander Kościuszko and any two Leaders chosen by Polish player;

Leaders that were not chosen to Activation Pool must not be shown to the opponent.

The entry of General Poniński. The units under General Poniński enter the game map on any hex from 0101 to 3901. Each unit pays for the first hex entered according to Terrain Effects Chart. All units enter in one Turn, chosen as follows:

  • a) in the First Turn, a die must be rolled. The die result plus 3 denotes the space on the Game Turn track where the Polish player places the Activation Chit for General Poniński.
  • b) at the beginning of the Game Turn determined by point a) above, the Polish player must roll a die and add the number of the current Turn to the result. If the total result is below 12, General Poniński and his units will not appear in the game. Any other result, denotes the Turn when the Activation Chit for General Poniński will be placed in the Activation Pool.
  • c) if the Polish player decides not to bring General Poniński and his units onto the map in the Turn determined by point b) above, the Activation Marker for General Poniński should be moved to next space on the Game Turn Track.
  • Russians: General Fersen, General Major Chruszczow and any two Leaders chosen by Russian player;
  • Seventh Turn: the Activation Pool consists of:
    • Poles: Commander Kościuszko and any two Leaders chosen by Polish player;
    • Russians: General Fersen, General Major Chruszczow, płk Tołstoj (entry hexes 0144-0149) and any two Leaders chosen by Russian player;
  • Eighth Turn: the Activation Pool consists of:
    • Poles: Commander Kościuszko and any two Leaders chosen by Polish player;
    • Russians: General Fersen, General Major Chruszczow and any two Leaders chosen by Russian player;
  • Ninth Turn and subsequent Turns: the Activation Pool consists of:
    • Poles: Commander Kościuszko and any two Leaders chosen by Polish player;
    • Russian: General Fersen and any four Leaders chosen by Russian player;