RulesPal
Chat
Rulebook
Lights Out Racing thumbnail

Lights Out Racing

Lights Out Racing Rulebook

Table of Contents

Table of Contents

  • Game Components
  • Gameplay
    • 1. Number of Laps
    • 2. Grid Order
    • 3. Track Position Around the Curves
    • 4. Overtakes
    • 5. Energy Recovery System (ERS)
    • 6. Drag Reduction System (DRS)
    • 7. Braking Zones
    • 8. Warnings
    • 9. Pit Stops
    • 10. Rolling Doubles/Triples

Game Components

Sort and distribute contents as shown:

  • 1 Game Board Track
  • 1 Gray Counter
  • 4 Black Dice
  • Each Player Needs:
    • 1 Racecar
    • 1 Driver's Card
    • 3 Colored Dice
    • 5 Counters

Gameplay

This game is a race. The first car to cross the finish line after completing a predetermined number of laps, wins the race.

All drivers share the same turn, each rolling two colored dice simultaneously. Drivers must move their cars the entire value of their dice roll, starting with the driver furthest from the lead (with exception to starting the game and doubles/triples that are rolled – see later sections for details).

1. Number of Laps

Each race track has a predetermined number of laps for the race. This is displayed on the game board.

Prior to the start of the race, each driver will place a counter on lap 1 of their driver's card. After each completed lap, slide the counter to the current lap number.

Tip: The more people that play, the longer the game will take. Try playing less laps for a shorter game.

2. Grid Order

The grid order is how the driver's line-up on the track, for the start of the race.

Each driver rolls one of their colored dice, and the higher the value, the higher the grid position. If two or more drivers roll the same value, they must re-roll between themselves, to determine their order. There are two grid spaces on each track tile.

For the opening roll of the game, the front of the grid moves first, starting with pole position (position one on the grid).

3. Track Position Around the Curves

The curves of the track are split into two segments; Fast (colored light gray) and Slow (colored dark gray). Each driver rolls one colored die to determine their path during the current lap. Prior to the start of the race, and each completed lap after that, the driver will roll the die for track position, and place a counter on their driver's card, indicating their position around the curves.

  • Fast Track = Even numbers from die roll (2, 4, and 6)
  • Slow Track = Odd number from die roll (1, 3, and 5)

4. Overtakes

At the end of each turn, no more than one driver can be on a single track tile. If multiple drivers share the same tile after all cars have ended their turn, those drivers each roll one die. The driver with the smallest value is overtaken by the other driver(s) and remains on the tile, while the overtaking driver(s) moves forward the value of the die roll. Repeat until drivers no longer share the same tiles. Energy cannot be stored on an overtake roll (see "Energy Recovery System" for details).

5. Energy Recovery System (ERS)

A fully charged Energy Recovery System (ERS) allows the driver to deploy a three dice roll during the turn of use.

A driver can charge the Energy Recovery System by choosing not to move the full amount of a turn's two dice roll, and instead store that energy in the Energy Recovery System. The ERS can be monitored on the driver's card, by sliding a counter up any number of the dice roll they want stored. Once ten is reached, ERS can be deployed on the next turn, and the driver has three ERS Deployments in store.

ERS Deployment must be activated prior to the dice roll of a turn. To activate, a driver must use a stored ERS Deployment by sliding the counter down on the driver's card or removing the counter if this is their last stored deployment, then roll three dice during the turn.

Energy cannot be stored if a driver has ERS Deployments available for use, or on the same turn ERS Deployment was activated. When all of a drivers ERS has been deployed, they may begin storing energy again.

6. Drag Reduction System (DRS)

The Drag Reduction System (DRS) allows a driver to slide along the DRS arrow. DRS can be activated after any of the drivers complete their turn move (it does not need to be activated from you moving your car). In order for DRS to be activated, the driver's car must be stopped in any of the DRS Detection Zone (colored dark green) tiles that are behind another car that is also stopped in the DRS Detection Zone. When this condition is met, the driver slides their car to the end of the DRS arrow, and performs any braking zone activities (see "Braking Zones" and "Warnings" for details).

If a driver activates DRS, they cannot move any remaining spaces from their turn roll. However, they may store the remaining energy, if their ERS allows.

When the starting grid is in a DRS Zone, that specific zone is disabled for the first lap.

7. Braking Zones

Braking Zones are designated by the dark blue track tiles, and require the driver to roll the four black dice. Each die represents one wheel of the car. Brake properly, or suffer the consequence of wheel lock-ups.

When a driver enters a braking zone (the dark blue tile), they must pause their movement, record the remaining amount of the drivers dice roll on the side counter, and then roll the four black dice. Drivers get two dice roll attempts to get as many matches of a single value as possible, setting aside any dice after the first roll, and re-rolling the others. The number of matches that are rolled (1 to 4 dice), the driver moves their car to the appropriate turn exit tile. Then, continue with the remaining amount recorded on the side counter from the turn roll.

If the number of matching dice was equal to the first turn exit tile, that driver receives a warning (see "Warnings" for details).

If the drivers rolls all matching dice, they are rewarded with full ERS Deployment!

8. Warnings

Warnings are received when exceeding track limits from the braking zones.

Warnings are designated on track tiles, and when a driver stops on one from a braking zone, they receive a warning and end their turn (they cannot move the remainder of the dice roll, but can store the energy if their ERS allows). When a warning is received, place a counter on the driver's card. When a driver reaches three warnings, they lose their next turn, and remove the counter from the driver's card, at the beginning of that turn. They start back at one the next time a warning is received.

9. Pit Stops

Each driver is required to take one pit stop during the race.

To take a pit stop, the driver must enter the pit lane during one of the laps in the race (pit stops cannot occur on the final lap). When a driver is in the pit lane, they can only roll one die for their turn, until they exit, and are back on the race track. The pit crew waits on the designated STOP tile. When the driver lands on this tile, they end their turn (they cannot move the remainder of the dice roll, but can store the energy if their ERS allows), and place a counter on the driver's card, signifying they took their pit stop, completed a lap, and re-rolled for track position around the curves. Unlike the track, multiple cars can end their turn on the same tile, where overtaking is not permitted. When drivers are in the pit lane, cars on the track move for their turn first.

10. Rolling Doubles/Triples

Rolling doubles (triples needed if using ERS Deployment) is an advantage to drivers. It gives them the option to move up-to the leading driver, or move the value of the dice roll. When a driver rolls doubles/triples, they make this decision before any other driver moves their car.

  1. If the driver decides to move up-to the lead driver, they move their car immediately, and end their turn. The remaining drivers proceed to move their cars with the normal turn order. The driver does not get to move the value of their dice roll, or store any energy to ERS. If the driver moves up-to a leader that is on a warning tile, they do not receive warning. A driver cannot move to a leader in the pit lane. They will instead have the option to move up-to the next leading driver on the track. If a driver moves up-to a leader that is on a curve of the track, but has the opposite track position (Fast vs. Slow), they change their track position to match the leader for the remainder of the lap.
  2. If they decide to move the value of their dice roll, all drivers proceed to move with the normal turn order.