La Bataille de Lauban, 1945
La Bataille de Lauban, 1945 Rulebook
Table of Contents
Table of Contents
1 - Overview
1.1 - Terrain
A hexagonal grid is superimposed on the map to regulate units' Movement (see 3) and Combat (see 6). The effects of the different types of terrain on movement and combat are detailed on the Terrain Effects Table (see page 16).
1.2 - Scales
One game turn represents two days of real time. A hexagon on the map corresponds to approximately 2 km. The counter units represent battalions, regiments brigades and German kampfgruppen.
1.3 - Units
Each unit has the following information on its counter:
- Combat strength and quality rating.
- Unit type (Mechanised, motorised or Leg) represented by a NATO symbol and size (see 5). All units with the mechanised symbol are mechanised.
- Identification: see appendix.
- An armoured bonus, identified by an asterisk.
- A Heavy Machine gun capacity, identified by a dot.
- A special characteristic, identified by the quality letter in grey.
- Movement allowance. It is not notated on the counter and is 8 MP for the leg units (in blue) and 10 MP for the mechanised or motorised units (in red). See below.
The majority of combat units have two combat steps. After the first loss, they are turned over to their reduced side. For units with only one combat step, they are destroyed after the first loss.
Leg unit movement (8 MP): Infantry, Mountain infantry, Paratrooper infantry, Engineers, Machine Gun (MG).
Mechanised/motorised movement (10 MP): Tanks, Assault Guns (Sturmgeschütz), Tank hunters, Mechanised Recon, Mechanised infantry, Motorised infantry. These are the Armour Units.
For units with three combat steps, after the second loss, they are replaced by a cadre counter (see 1.7).
1.4 - Headquarters
HQ (marked QG on the counter) are used to allocate support (aviation and artillery) to the combats. They contain the following information:
- Maximum number of supports to allocate to offensive and/or defensive combats during the turn.
- Range at which these supports can participate in the combat.
- Corps HQ may support their own troops and Army troops.
- Army HQ may support all troops.
- Their movement capacity is motorised.
A HQ attacked by an enemy unit while it is alone in a hex is removed from the game. It returns as a reinforcement on the next turn (see 13.2). Place it on the turn track.
A HQ contacted during the movement phase or an advance after combat by an enemy unit while alone in a hex is removed from the game. The unit that came into contact with it may continue its movement if it has the movement allowance. It will return as a reinforcement one turn later. Place it on the turn counter.
Example: a HQ destroyed in turn 3 will return to the game with reinforcements from its camp in turn 4.
- An HQ does not have a ZoC.
1.5 - Special characteristics
-
German and Soviet Recon units: these units are able to infiltrate enemy ZoC of Infantry units (whatever the type) (see 4.4).
-
Engineer units: these units provide a combat bonus in a city or village of one column.
-
Mechanised brigades of the 9th Soviet CM: these units automatically benefit from the Infantry + Armour bonus (see 6.2).
Erratum: these three brigades have the same name, but in fact they are the 69th, 70th and 71st brigades. Two new counters are given on page 14 of these rules.
-
101/FGB and 57/3AB: When this unit is in combat against an Armour unit, add + or - 1 to the combat die.
-
Multiple rocket launchers: these artillery units (Katioucha and Nebelwerfer) provide a bonus once per turn of + 1 column to a combat in which they participate (in attack or defence) at a distance of three hex maximum. Once used, they are all turned over to their back side to indicate that they have been used this turn. Their movement capacity is motorised (10 MP). An LRM unit that is contacted during the movement phase or during an advance after combat by an enemy unit while it is alone in a hex is removed from the game. The movement of the unit that contacted it may continue if it has the capacity to do so.
1.6 - Special units
The three Soviet SU 152 units have a second combat step with a value of '0'. When they participate in a battle in this state, they contribute only their armour bonus.
Note: These units had a limited number of vehicles.
1.7 - Cadres
1.7.1 - Losses
Soviet infantry Divisions (254 and 274) have three combat steps (corresponding to three regiments). After the first loss, they are turned over. After the second loss, replace the infantry counter with a "cadre" counter of the same quality.
Example: 214 division.
1.7.2 - Distribution of a unit
Soviet infantry divisions at full strength may also distribute one of their three regiments in order to be represented by two counters.
At the beginning of the unit's movement, the Soviet player indicates if he wants to distribute his division. This action is free and costs no movement points. He turns the counter over to its reduced side and adds a cadre of good quality to the hex. The two counters may move together, or not, as the player chooses.
Example: 214 division.
1.7.3 - Reintegration of a regiment
Inversely, a Soviet division on its back side may reintegrate a cadre at the beginning of movement if the two counters are in the same hex. This action is free and costs no movement points. The division is turned over to its front side and the cadre is removed from the map.
Note: the number of cadre counters provided on the strip is the limit.
Example of movement: Armoured unit 10 PzG disengages from the Soviet unit 69/9M's Zone of Control at a cost of 2 MP (1) and enters 1109 (1 MP), another motorised/mechanised unit prevents it from benefiting from the road, so it spends +2 MP (2), it then advances on the road in 1009 at a cost of 1 MP and then in 910 where the foot unit does not prevent it from benefiting from the road (3) for 1 MP. In 0810, it will have spent 10 MP (4).
2 - Sequence of Play
Lauban 1945 is played in 9 or 10 turns (see 10.3.3). Each game turn contains several phases which are described below.
2.1 - Game turn
- The players determine the number of air missions they will have this turn (see 9).
- From turn 3, players alternate drawing random events from the table (see 12).
A - Soviet supply Phase. The Soviet player checks the supply lines [LoS] (see 7) for all his units.
B - Soviet Movement Phase. The Soviet player moves all or part of his units, respecting the Rules of Movement (see 3), Stacking (see 5), and the Zones of Control (see 4).
C - Soviet Combat Phase. The Soviet player has his able units combat, respecting the combat rules (see 6), in the order he chooses.
D - German supply Phase. The German player checks the supply lines [LoS] (see 8) for all his units.
E - German Movement Phase. Same as phase B but for the German player.
F - German Combat Phase. Same as phase C but for the German player.
G - End of the turn. The turn marker is moved forward one space on the turn counter. If it is the last turn of the scenario, check the victory conditions.
*## 3 - Movement
3.1 - Overview
During movement, a unit can move all or part of its movement allowance by spending the movement points (MP) required for each type of terrain moved through.
All leg units have a movement allowance of 8 MP; the motorised and mechanised units have a movement allowance of 10 MP.
A unit is not required to expend all of its MP during its movement action, but if it does not, the remaining MP are lost for this turn.
3.2 - Terrain effects
The effects of terrain on movement and combat are given on the Terrain Effects Table (see page 16).
- Roads: for mechanised and motorised units, the cost in MP for use of a road or railway only applies if the unit is alone in the hex, or stacked with a leg unit. If a mechanised or motorised unit is stacked with another mechanised or motorised unit or if a mechanised or motorised unit crosses a mechanised or motorised unit already on the road, it will then pay a +2 MP malus. Leg units always benefit from road movement.
- Bridges: They are located wherever a road or rail crosses a river or canal. This bridge cancels the cost in MP of a river crossing, but not certain penalties linked to combat (see Terrain Table). The regular Zones of Control apply (see 4.1).
Example: a bridge is located between hex 1114 and 1214. A unit that crosses this bridge will pay only the movement indicated for the road or terrain present in the hex and not for the river. However, the combat modifier still applies.
4 - Zones of Control
4.1 - Overview
All combat units exert a Zone of Control (ZoC) in their own hex and over the six adjacent hexes except through the Rhine.
A unit's ZoC influences the movement and combat of other units.
4.2 - Effects of ZoC
4.2.1 - Overview
- A unit that enters an enemy ZoC must stop its movement (exception 4.4 - Infiltration).
- A unit that begins its movement in an enemy ZoC may leave this ZoC by spending an additional +2 MP.
- A unit cannot move directly from one enemy ZoC to another enemy ZoC exerted by the same unit (exception: 4.4).
- The presence of a friendly unit in an enemy ZoC nullifies it for retreat (see 6.5.1), supply (see 8.1) and concentric attack (see 6.2.9) but not for movement.
Note: the presence of a friendly ZoC does not negate an enemy ZoC.
Important: a unit that advances after combat does not take into account the enemy ZoC it crosses even if these ZoC are exerted by the same unit (see 6.5.2).
4.3 - ZoC and combat
- Combat is not mandatory for a unit that ends its movement in an enemy ZoC.
- A unit or stack of units that retreats into a ZoC as a result of combat loses one combat step (for the whole stack) for each enemy ZoC it crosses (see 6.5.1) unless a friendly unit is present in the hex.
4.4 - Infiltration
Recon units are able to infiltrate and therefore pass from one enemy ZoC to another, exerted by the same unit. The only cost is the +2 MP to exit each ZoC (in addition to the terrain). This infiltration may only be performed against enemy infantry units (any type) and in clear, difficult or on road.
Example: unit 17/17 Pz moves into the ZoC of Soviet unit 90/3AB. From 1 to 2, it pays +2 MP to exit the ZoC exerted in 1110 and 1 MP for the clear terrain. It has therefore spent 3 MP and can continue its movement in 3 for +2 MP to exit the ZoC and 1 MP for the terrain. It will have spent a total of 6 MP.
Example of infiltration movement: see the diagram on page 6 of the rules.
5 - Stacking
5.1 - Overview
The size of the units is as follows:
- X: brigade
- III: regiment
- KG: Kampfgruppe
- II: battalion
The stacking limit takes effect at the end of each movement and combat phase.
However, during each movement phase, friendly units may exceed the stacking limit without consequence (exception: mechanised units on the road, see 3.2).
Units exceeding the stacking limit are eliminated (as the owning player chooses).
The various markers and the HQ do not count toward the stacking limit.
5.1 - Soviet stacking
The Soviet player may stack in the same hex up to three regiments or brigades plus (one battalion) or two regiments or brigades plus (two battalions). An infantry division = 3 regiments (see 1.7).
5.2 - German stacking
The German may stack in the same hex up to three regiments or KG plus (one battalion) or two regiments or KG plus (two battalions).
Exception: see 10.1.3.
6 - Combat
In Lauban 1945, the combat takes place between adjacent units. The units that attack are called the "Attackers" and the units in the targeted hex(es) are called the "Defenders".
6.1 - Overview
- A unit may attack any hex containing an adjacent enemy unit.
- An enemy unit can be attacked by any adjacent friendly units.
- Multiple attacks: all enemy units in the same hex must be attacked together, and they must all participate in their defence; their defence value is the sum of their combat points.
Attacking units that are in the same hex (that is, in the same stack) can attack different enemy hex. Each attack is resolved separately. However, the combat value of a unit cannot be divided among several combats.
6.2 - Combat modifiers
The modifiers are as follows and are applied in the order indicated.
All of these modifiers are cumulative but there may only be one modifier of each type in the same combat (exception: artillery).
6.2.1 - Defender's terrain penalty
The terrain in the defender's hex provides:
- column shifts.
- the Combat value of an Infantry unit is multiplied by two in a city.
- the attack value of each unit is divided by two if across a river (rounded up).
Example: two units of combat value 5 stacked together will have a final combat value of 6 (5/2 = 2,5 rounded up = 3, multiplied by 2). These modifiers are cumulative.
Example: a unit attacking a wood behind a river will have its combat value/2 and a shift of -1 column.
Always take the most favourable penalty for the defence.
Example: if one unit attacks across a river and the other does not, divide by 2 the one which attacks across; if there is a bridge, the penalty is -1 column.
When a village and another type of terrain are present in the same hex, take the more favourable in defence.
6.2.2 - Divisional integrity bonus
-
If all the regiments of the same infantry division attack the same adversary, the attack receives a bonus of a +1 column shift to the right. Any additional battalions do not count toward divisional integrity. Only the following units are eligible for this bonus:
Germans: divisions 408, 6VGD.
Soviet: divisions 214 and 254 as long as they have no loss.
-
If at least three brigades (Armor, mechanised or motorised) of the same corps attack the same adversary and the defender is in clear terrain, the attack receives a bonus of a +2 column shift to the right. Only the following units are eligible for this bonus:
Soviet: 6T, 7T and 9M.
-
If at least two regiments or KG of the same Panzer or Motorised Division attack the same adversary and the defender is in clear terrain, the attack receives a bonus of a +1 column shift to the right. Only the following units are eligible for this bonus:
Germans: 8 Pz, 16 Pz, 17 Pz, 21 Pz, 10 PzG, FGB.
6.2.3 - Armour vs Infantry
If an armoured unit (Tanks, Assault Guns, Tank hunters) fights an Infantry unit (of any type) alone in clear terrain, then it receives a +1 column shift in attack and in defence.
6.2.4 - Infantry + Armour
If an infantry unit (of any type: leg, motorised or mechanised) is stacked with an Armour unit or Recon unit, it receives a +1 column shift in attack and in defence.
Reminder: Soviet Mechanised Brigades automatically have this capacity.
6.2.5 - Armoured bonus
Armour units that have an armoured bonus (indicated by an asterisk) benefit from a +1 column shift in attack or in defence, if enemy Armour units participate in the combat and none of them has an armoured bonus.
6.2.6 - Engineer
If an engineer unit participates in a combat against or in a city or village it receives a +1 column shift (see 1.5).
6.2.7 - MG units
Gives a +1 column shift in defence against Infantry units only.
6.2.8 - Artillery and air support
Each artillery point spent gives a +1 column shift in the combat in which it participates. A maximum of 2 points may per spent per combat.
Note: support provided by LRM artillery counters does not count towards this limit, as these units are on the map.
Each aviation point spent gives a shift of +1 column in the combat in which it participates (see 12). A maximum of 1 point can be spent for the same combat.
Note: the attacking player allocates his support first, followed by the defender.
Players may decide by mutual agreement to do so secretly.
6.2.8 - Concentric attack
If a defender's unit is completely surrounded by attacker's units and their ZoCs, the attacker receives a +1 column bonus.
Example of a valid concentric attack: see the diagram on page 8 of the rules.
6.2.10 - Quality
A unit's quality is used to calculate its probable performance in a given combat. This value ranges from A to D and is used by the attacker and the defender during each combat. If several units of varying qualities participate in a combat, always choose the one with the best quality.
Each player rolls 1d6 on the Quality Table and uses the result to shift the column to the right or left on the CRT.
A negative number obtained by the defender equals a corresponding number of additional columns for the attacker and vice versa.
Design note: this table amounts to testing a unit's capacity to organise its attack or its defence, based on its command and its training, and its ability to deal with the unexpected (bad coordination, lack of ammunition, impetus, etc.). The higher the quality, the less likely the unit is to undergo a negative result and vice versa.
Game note: we advise the attacker to roll two dice of different colours for the combat in order to speed up the process.
6.3 - Combat resolution
Combat takes place as follows: Both the attacker and the defender add up their combat strength points. Find the ratio between the attacker's and defender's sums to obtain a basic force ratio on the CRT. This ratio is always rounded in the defender's favour.
Example: if 13 strength points attack 7, the strength ratio is 1.86/1, rounded down to 1.5/1 or 3/2. If 15 points attack 4, the strength ratio is 3.75/1, rounded down to 3/1.
Column shifts are then applied to obtain the final strength ratio column.
If this final strength ratio is above 8/1, then the attacker will have a +1 Die Roll Modifier.
Note: the final strength ratio cannot be less than 1/3 or greater than 8/1 after all the column shifts (bonus or penalty) have been applied. Any modifiers leading to these limits being exceeded are not taken into account except for the +1 DRM.
The attacker consults the appropriate column on the Combat Results Table (CRT) then rolls 1d6 to obtain the final combat result.
Example: the final strength ratio is 10/1, the attacker will roll a die on the 8/1 column with a +1 DRM.
6.4 - Combat results
Combat results are given in the form of a letter R and/or numbers that can affect the attacker as well as the defender. The letter R indicates a mandatory retreat. The numbers indicate the number of strength steps that force must lose and/or the additional number of hexes to retreat.
-
The owning player apportions his combat loss(es) as he chooses among the stack and the number of retreat hexes, always beginning with the mandatory retreat, losses, and then optional retreats. The defender apportions his losses and retreats, if any, then, the attacker does the same. (Exception, result 1/R).
-
Results in bold on the CRT indicate that the final requirement to be filled for the combat result is chosen by the attacker. The defender, however, chooses the unit or the stack that undergoes the loss or the hex. of retreat.
-
If the defender can or chooses to remain in place and lose strength steps, the attacker must take at least one combat loss before retreating if the result requires so (a result with at least two requirements: R2, R1 or 2). In the case of only one requirement, the attacker retreats (R) or chooses to retreat or lose a step (1). In any case, if the defender retreats (by choice or necessity), the attacker may also choose to retreat.
Special case. If the result is 1/R, the attacker chooses first. If he retreats, the defender ignores the retreat result and can stay in place by taking a loss. If he takes the loss, the defender must retreat (except for units of grade A or B).
-
Preferably, the first loss is taken by the most important unit in terms of steps. In the case of a tie, the owning player chooses.
-
The first loss is not necessarily taken by the unit whose quality was chosen for the combat.
-
However, if there are Armour units present on both sides, the first loss must be taken by an Armour unit that participated in the combat.
Exception: this loss is not necessarily taken by the unit if it has an armoured bonus.
-
For a unit of quality A or B, the mandatory retreat can be converted to a loss. In this case, if units of lesser quality are stacked with this unit, they do not retreat either.
-
For a unit of any quality in a city or village, the mandatory retreat may be changed to a loss.
6.6 - Retreat and advance
Editorial note: the printed rules have no heading 6.5. The cross-references to 6.5.1 (retreat) and 6.5.2 (advance after combat) in sections 4 and 6 point at 6.6.1 and 6.6.2 below, as printed.
6.6.1 - Retreat
A unit or stack of units that retreats cannot enter a hex occupied by enemy units. It also cannot retreat into a hex that is impassible to it.
Units must retreat as much as possible according to the following order of priorities:
- toward a hex outside of enemy ZoC;
- in the general direction of a friendly map edge (north for the Soviet and east, west and south for the German);
- toward the hex farthest from an enemy unit.
- A unit or stack may retreat into an enemy ZoC, losing one combat step for the entire stack per hex of enemy ZoC moved through, unless this hex is occupied by a friendly unit.
- Units in a retreating stack may retreat into different hexes as long as they all retreat the same number of hexes.
- A unit that must retreat into a hex with impassable terrain or a hex occupied by enemy units is eliminated.
- A unit which must retreat off the map returns the following turn to the hex from which it exited or to an adjacent hex. If that hex is occupied by an enemy unit, it returns to a different but adjacent hex, free of enemy units.
Note: if a unit retreats in violation of the rules of stacking, it or a unit in the stack will be eliminated (see 5).
6.6.2 - Advance after combat
-
When a unit or stack of units retreats or is eliminated, it leaves the hex that it had occupied vacant, as well as a retreat path of varying length depending upon the number of hex retreated.
-
Victorious units that took part in the combat may then enter the vacated hex and advance along the retreat path of the defeated unit, still respecting impassible terrain. If a retreating stack splits into several hex, the active player is free to follow whichever of the retreat path(s) he wishes.
-
Leg units that advance after combat stop in the second ZoC they arrive at.
-
Mechanised and Motorised units that advance are not blocked by the enemy ZoC they come into contact with (see 4.2.1).
Exception: Mechanised and Motorised units are not required to follow the retreat path of retreating units after the first hex.
-
Crossing a river without a bridge or advancing in a wood hex without a road or rail costs 1 hex of advance to Mechanised and Motorised units.
-
In the case of a shared result, the attacker must convert all of his adverse results into step losses if he wishes to advance after combat.
-
Only the attacker may advance after combat.
Examples:
- The result R1/– indicates that the attacker must retreat one hex and either lose one strength step or retreat an additional hex.
- The result –/1 indicates that the defender must retreat one hex or lose a strength step.
- The result 1/R1 indicates that the defender must retreat one hex and then either retreat another hex or take a loss. The attacker must then either retreat one hex (the defender having retreated) or lose one strength step. If he chooses the second option, he may then advance to the hex vacated by the defender. If the defender retreats 2 hex, for example, the attacker can follow the defender along his retreat path.
- The result 1/R3 indicates a mandatory retreat of one hex for the defender and 3 additional requirements to take in strength losses or retreats. The defender retreats one hex (mandatory) then loses 2 strength steps and stays where he is or loses one strength step and retreats all his units one or two hex. The attacker will finally choose (result in bold) to retreat the stack one additional hex to retreat or to have it lose another strength step. Then, the attacker must retreat one hex (the defender having retreated) or lose a strength step. If he chooses the second option, he may then advance to the hex vacated by the defender.
- If an enemy unit is eliminated before it fulfils all of its requirements described on the CRT, the attacker can convert the remaining requirements into hex to advance after combat.
Example: if a –/R2 result eliminates a unit that only had one strength step left, the attacker can advance 2 hex, respecting the ZoC rules.
7 - Supply
7.1 - Overview
A Line of Supply (LoS) may pass through any type of terrain usable by a motorised/mechanised unit but cannot pass through an enemy-occupied hex or through an enemy ZoC, unless this hex is occupied by a friendly unit. The length of a LoS is infinite.
Note: a LoS can cross a river at a bridge.
Soviet unit supply is checked during the Soviet supply phase. German unit supply is checked during the German supply phase.
7.2 - Supply
For a unit to be supplied, it must be able to trace a Line of Supply (LoS) to the friendly edge of the board.
- Soviet: northern edge.
- Germans: southern edge and eastern and western edges to line 07xx except by an impassable hex.
The presence of an enemy unit or enemy ZoC in one of these hexes cancels the LoS in this hex.
7.3 - Consequences
-
If a unit is unable to trace a LoS during its supply phase, it gets an Isolated marker. The consequences are as follows: the unit attacks at half its combat strength but it defends itself and moves normally.
-
An isolated unit that cannot trace a LoS at the start of its turn gets an Unsupplied marker. The consequences are as follows: the unit cannot attack and it defends itself at half its combat strength and moves at half its movement value.
Note: combat strength values are rounded up to the nearest whole number.
-
An isolated HQ can support a friendly unit in defence only. An Unsupplied HQ cannot support a friendly unit.
8 - Artillery
Players receive a certain number of artillery points per turn. These artillery points cannot be held from one turn to the next.
| Turn | Soviet | Germans |
|---|---|---|
| Turn 1 | 3 | 2 |
| Turn 2 | 5 | 3 |
| Turns 3-5 | 5 | 4 |
| Turns 6+ | 5 | 5 |
9 - Aviation
9.1 - Overview
Players may engage in air missions during combat.
A marker is provided to record air missions and show them on the map.
Each air mission gives a bonus of one column in attack or in defence.
Important: to allocate a plane to a battle, a HQ is not necessary, but the owner rolls a D6. On a result of 1 or 2 the plane does not participate in the battle.
9.2 - Number of missions
The two players roll a die and get the number of air missions for that round.
- Soviet player: 1-2: one mission; 3-4: two missions; 5-6: three missions.
- German player: 1-3: one mission; 4-6: two missions.
Note: this result can be modified by an event (see 12). The minimum is always one mission.
10 - Scenario
Editorial note: several subsection numbers in the printed rules are out of sequence (the Soviet set-up is printed as 10.1.1 under the German one, the Soviet reinforcements as 12.2.1 and the VP count as 12.3.1). They are kept as printed so that cross-references in the source still match.
The scenario begins 17 February and lasts for 9 turns.
The Artillery markers of both camps are placed on their respective levels on the appropriate track on the map.
10.1 - Set-up
10.1.1 - German
The German player sets up first.
- 17 Pz (5 counters): 4 hex from one hex of Görlitz (0802-0902).
- HQ 38 PzK: Görlitz (0802-0902).
- 6 VG (4 counters): 3 hex from Lauban (0709).
- 408 ID (2 counters): 3 hex from Lowenberg (0619).
The two garrisons Lauban and Görlitz set up in their respective cities.
Note: these two units fight only on defence.
10.1.1 - Soviet
Soviet units enter the map on turn 1, respecting the rules for the entry of reinforcements (see 10.2).
- 1603: HQ 6T and corps units (9 counters).
- 1608: HQ 7T and corps units (9 counters).
- 1619: HQ 9M and corps units (9 counters).
10.1.3 - Volksturm
Faced with the Soviet advance, the Germans mobilised numerous second- and even third-rate troops: the Volksturm units. These troops are represented by counters of unknown combat value. They have two sides: one with values and the other with a question mark.
At the start of the game, the German player randomly selects each of the Volksturm counters and places them face down, one counter per village hex of his choice located between the 09xx (inclusive) and 14xx (inclusive) line. There are eight counters in total.
This immobile counter is there to slow down the movement of Soviet units. It projects a ZOC and must be fought to be eliminated.
If during the Soviet Movement Phase, a unit comes into contact with the counter, it stops its movement and the Soviet player turns the Volksturm unit over.
- If the flipped unit has a combat value of zero, it is immediately eliminated and the Soviet unit can continue its movement if it has any MPs left.
- If the flipped unit has a non-zero combat value, it will have to be fought during the combat phase.
Volksturm units cannot stack with any other German unit.
Volksturm units cannot move. In the event of retreat, they are eliminated. They only have one combat step and this combat value can only be used in defence.
10.2 - Reinforcements
Reinforcements arrive by the indicated hexes. If several units arrive by the same hex during the same turn then the order of arrival is specified as well as a movement malus in MPs for the following units after the first one.
Note: each unit enters on its own, not stacked with another.
12.2.1 - Soviet reinforcements
- Turn 2: HQ 3AB plus the support units of 3AB (5 counters) enter from the north side, as chosen by the player.
- Turn 3: division 254 enters from the north side, as chosen by the player.
- Turn 5: division 214 enters from the north side, as chosen by the player.
Note: historically, division 254 entered in 1619 and division 214 in 1608. This gives the Soviet player some leeway in terms of when he enters his reinforcements.
10.2.2 - German reinforcements
- Turn 1: HQ 17A + Werfer in 0104, 0110, or 0115; HQ 57 PzK + 103 PzB (2 counters) in 0110; 8 Pz (6 counters) in 0115.
- Turn 2: 10 PzG (2 counters) in 0119.
- Turn 4: 1461 + MGB55 in 0110.
- Turn 6: FBD (4 counters) in 0115; FGD (3 counters) + Sturm 911/FGD in 0104.
- Turn 7: 21 Pz (2 counters) in 0115.
- Turn 8: 16 Pz (2 counters) in 0110.
10.3 - Victory conditions
12.3.1 - VPs count
The Soviet player gains Victory Points (VP) this way:
- + 5 VP for the hex of Naumburg (1114) taken and occupied.
- + 5 VP per hex of Görlitz (0802-0902) taken and occupied.
- + 5 VP per hex of Bunzlau (1518-1519) taken and occupied.
- + 10 VP for Lauban (0711) taken and occupied.
- + or - 1 VP per group of 5 destroyed armoured (tanks, tank destroyers, assault cannons) or mechanised enemy or friendly combat steps.
Note: occupied means that the last unit to have passed through is French.
10.3.2 - Victory at the end of the game
The Soviet player counts his VPs:
- 10 PV or less and Lauban is still German: German operational victory.
- 11-15 VP and Lauban is still German: German tactical victory.
- 16-20 PV: Soviet tactical victory.
- 21-25 PV: Soviet operational victory.
- 25 PV and Lauban is Soviet: Soviet strategic victory.
10.3.3 - Turn 10 optional
The German player can decide to continue his offensive beyond the 9th turn by playing an extra turn. He must make his decision at the end of turn 9, when he will give the Soviet player +2 VPs.
11 - Abbreviations
- Soviet
- 3AB: Third Guard Tank Army
- 6T: 6th Guard Tank Corps
- 9M: 9th Mechanised Corps
- Germans
- FBD: Führer Begleit Division
- FGD: Führer Grenadier Division
Erratum: the FGB (Führer Grenadier Brigade) counters should be FGD (Führer Grenadier Division). The FDB counters should be FBD (Führer Begleit Division).
12 - Random events
12.1 - Overview
From turn 3, one of the players throws 1D6 on the random events table.
An event can occur several times during the game.
| Die | Turn 3+ Event |
|---|---|
| 1 | Bad weather |
| 2 | Difficult Soviet supply 1 |
| 3 | German command problem |
| 4 | Difficult German supply |
| 5 | Difficult Soviet supply 2 |
| 6 | Very bad weather |
12.1 - Explanation of the events
-
Bad weather: the number of available aircraft is halved and rounded up to the nearest whole number (minimum one aircraft, maximum two).
-
Difficult Soviet supply: the movement of Soviet mechanised and motorised units is halved: only 5 MP.
-
German command problem: counters belonging to different units cannot attack together nor benefit from the combat bonus 6.2.4.
Note: each unit has its own colour code in addition to that of its formation. The 10 PzG is orange, for example, and belongs to the 57 PzK (blue). This rule also applies to units of the 17th Army.
-
Difficult German supply: same as Difficult Soviet supply 1.
-
Difficult Soviet supply 2: Soviet artillery points are halved and rounded up to the next whole number (minimum 1, maximum 3).
-
Very bad weather: no aircraft available this turn.
Erratum Soviet counters
The printed erratum strip shows four replacement Soviet counters (counter identification, combat value, quality):
- 70/9M, combat value 5, quality C
- 71/9M, combat value 5, quality C
- 71/9M, combat value 3, quality C
- 70/9M, combat value 3, quality C
Editorial note: the strip is printed as a picture with no further text; the four entries above are read from it.
Examples of combat
Combat A. The three German units Sturm 911, 2-3/99 and 101 of the FGD attack unit 53/6T. 11 combat factors against 3, giving a strength ratio of 3:1. The German player benefits from the following modifiers: divisional integrity, infantry + armour, armour bonus and Werfer support, giving a ratio of 7/1. The Soviet player brings artillery support thanks to HQ 6T, giving a final strength ratio of 6/1. The German player rolls 2d6, obtaining 4 for the combat and 5 for the A quality (+ 1 column). The Soviet player obtains 3 for the B quality (no effect). Finally, the German adds +1 to his combat die (special rule of 101/FGB) for a final result of 5. The result obtained on the CRT is therefore 1/R3.
The Soviet unit retreats 3 hexes in 0909, 1009 and then 1109. The German chooses the last obligation and eliminates it. The 2-3/99/FGB suffers a loss (the armoured unit has an armour bonus). The units can advance 3 hexes, the 101 advances in 1009, the 2-3/99 in 0908 (the forest costs one hex of advance).
Combat B. The strength ratio is more unfavourable to the Germans: 5 against 4, or 1 against 1 (the garrison cannot attack). The combat takes place across bridges, -1 column. The infantry + armour modifiers cancel each other out, the Machine Gun vs Infantry bonus only brings a column in defence, but artillery brings +1 column. The final odds are therefore 1/1. The German rolls the dice and gets 6 and 5 for the B quality, which makes 3/2, while the Soviet player rolls a 3, which is nothing. The final result is 1/R. The German player must choose first (special case, see 6.5), he decides to take a loss because he wants to push back the Soviet units (quality C). The armoured unit must take the loss, then he advances into the liberated hex thanks to the bridge.
Editorial note: the examples refer to "see 6.5" for the special case; that rule is printed as 6.4 (Special case) above.
Reference tables
Terrain Effects Table
| Terrain | Leg units (MP) | Mechanised/Motorised (MP) | Combat |
|---|---|---|---|
| 1 - Clear | 1 | 1 | – |
| 2 - Difficult | 1 | 2 | -1 column |
| 3 - Wood | 2 | 3 | -1 column |
| 4 - Village | Other terrain | Other terrain | -1 column |
| 5 - City | Other terrain | Other terrain | -2 column; Infantry x 2 (note 1) |
| 6 - Road | 1 | 1 (see 3.2) | Other terrain |
Note 1: combat value modifier for infantry defending in the hex. Note 2: 1 MP in clear terrain; 2 MPs in difficult terrain or forest.
Quality Modifier Table
| Die | A | B | C | D |
|---|---|---|---|---|
| 1 | – | -1 | -2 | -2 |
| 2 | – | – | -1 | -1 |
| 3 | – | – | – | -1 |
| 4 | +1 | – | – | – |
| 5 | +1 | +1 | – | – |
| 6 |
Result: column shifts.
Combat Modifiers
Modifiers are applied in this order:
- Defender's terrain: see Terrain Table.
- Divisional integrity: +1 col.
- Armour vs Infantry: +1 col.
- Infantry + armour: +1 col.
- Armoured bonus: +1 col.
- Engineers against city/village: +1 col.
- Machine Gun: -1 col vs Leg infantry.
- Artillery: +1 col. 2 max per combat.
- Concentric attack: +1 col.
- Quality: see above.
- DRMs: 654 s.PzJg vs Armour: +1; French 1st turn: +2; Combat ratio > 8/1: +1.
All of these modifiers are cumulative but there can only be one modifier of each type in the same combat.
Editorial note: the printed chart gives the Machine Gun modifier as "-1 col vs Leg infantry" while section 6.2.7 gives a +1 column shift in defence against Infantry; the printed wording is kept in both places. The "French 1st turn: +2" DRM and "654 s.PzJg" are printed as they appear on the chart.
Combat Results Table
| Die | 1/3 | 1/2 | 1/1 | 3/2 | 2/1 | 3/1 | 4/1 | 5/1 | 6/1 | 7/1 | 8/1 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | R2/- | R1/- | R/- | 1/- | 1/- | 1/1 | 1/1 | -/1 | 1/R | -/R | -/R1 |
| 2 | R1/- | R/- | 1/- | 1/- | 1/1 | 1/1 | -/1 |
Attacker/Defender.
- Number: number of steps to lose and/or retreat.
- R: mandatory retreat except for units of quality A and B that can take a loss instead.
- Bold result: the last requirement to follow (step loss or retreat) is chosen by the attacker.