Kenshin Joraku
Kenshin Joraku Rulebook
Table of Contents
Table of Contents
- 2 Components
- 3 Initial Setup
- 4 Sequence of Play
- 5 Stacking
- 6 Force Formation
- 7 Zone of Control
- 8 Castles
- 9 Start of Turn
- 10 Movement
- 11 Combat
- 12 Field Battle
- 13 Siege Battles
- 14 OVERRUN
- 15 Killed Units
- 16 Navy
- 17 Mori Terumoto
- 18 Uesugi Kenshin
- 19 Ishiyama Hongan-ji
- 20 Neutral Castles and Forces
- 21 Victory Points
- 22 Victory Conditions
- 23 Additional Units
2 Components
(1) Game board: 1 sheet (2) Units (counters): 1 set
2-1 Game Board
A map board showing the whole battlefield. The board contains the following.
2-1-1 Map
The map is printed with a hex grid. Units move across it to play the game.
(1) Hexes: used to show the position of units and to make the distances between them clear. Every unit that comes into play must be placed in a hex. (2) Terrain: each hex is drawn with terrain of various colours and symbols. This terrain has a variety of effects on both armies' marching and combat. (3) Castles: each daimyo house's castles and units are distinguished by the same colour. Below each castle are two numbers. The left number is the castle's durability (耐久力); the right number is its defence (防御力). Port castles marked with an anchor can serve as naval supply bases and as bases for navy units.
2-1-2 Charts
The use of each chart is described under the relevant rule.
(1) Battle Results Table (see 12) (2) Terrain Effects Table (see 10) (3) Attrition Table (see 9) (4) Encirclement Table (see 9) (5) Mori Deployment Table (see 9) (6) Oda Reinforcement Table (see 9) (7) Uesugi Reinforcement Table (see 9) (8) Status Change Table (see 9) (9) Minor Daimyo Table (see 9)
2-1-3 Track Boxes
Place each marker in the matching box on its track to show the current state of the game. Each marker's use is described in the rules.
(1) Phase Track (see 4) (2) Turn Track (see 4) (3) Victory Point Track (see 21)
2-1-4 Command Boxes (printed in the upper-left area of the map)
The box under each commander's unit name is that commander's command box. The boxes show which units each commander leads when forces are formed (see 6).
2-2 Units
The counters in this game are of two kinds: units that serve as fighting forces, and markers that show various states of play.
2-2-1 Units
One unit represents about 2,000 soldiers. All units are placed and enter play on their normal (front) side.
(1) Type: a unit's type is shown by a silhouette on the counter. Land units are divided into great generals, samurai generals, generals and shoguns. Navy units are divided into navy units and ironclads. (2) Force name: shows which general leads the force. A unit with a 【*】 mark to the right of its name is a unit from the additional rules (see 23). A unit with a 【**】 mark is used to replace a unit affected by a Status Change (see 9-2, Araki Rebellion). (3) Commander: a unit whose force-name panel has a white background is called a commander unit. A commander unit can use its command box to form forces (see 6). (4) Combat rating: the value used in combat (see 11). (5) Action value: used in the Reaction Phase (see 10) and the Forced March Phase (see 10). A unit on its 1STEP (flipped) side has no action value, so a flipped unit cannot take part in forced marches or reaction moves. (6) STEPs: a unit on its front side has 2 STEPs, i.e. 2 strength points. A front-side unit that takes 1 point of damage is flipped to its 1STEP side, i.e. 1 strength point. (7) Daimyo house: the units of each daimyo house are distinguished by colour.
2-2-2 Markers
Markers come in the following kinds. See the rules for how each is used.
(1) Turn marker (see 4) (2) Phase marker (see 4) (3) Victory point marker (see 21) (4) Engagement marker, front side (see 10-7) (5) Stockade marker, back side (see 10-8) (6) Encirclement marker (see 13-1) (7) Reduced durability marker (see 12-2) (8) Control marker: used when a castle has been taken by the opposing side. Only Oda and Uesugi need to be distinguished for this purpose; individual daimyo houses need not be told apart.
Transcriber's note: the source cross-references the reduced durability marker to 12-2; the rules that place it are 8-1-3 and 13-2.
3 Initial Setup
Before the game starts, each player follows the instructions below.
(1) First, decide which player plays the Uesugi side and which plays the Oda side. (2) Spread out the map and place the units each player uses on the map according to the initial setup. At this point a player may form the units in the same hex into forces as they wish.
Initial setup: omitted in the source, which refers the reader to the Japanese manual.
(3) Place the victory point marker on the 【0】 space of the Victory Point Track. (4) Place the turn marker on the 【0】 space of the Turn Track. (5) Place the phase marker on the 【Start of Turn】 space of the Phase Track.
4 Sequence of Play
Each turn is played in the following order. Each step of the order is called a phase.
(1) Start of Turn Phase *Encirclement resolution *Status change *Mori deployment *Supply line check and attrition *Reinforcement (2) Uesugi Movement Phase *Formation *Movement *OVERRUN (3) Oda Reaction Phase *Action value check *Movement *OVERRUN (4) Uesugi Forced March Phase *Action value check *Movement *OVERRUN (5) Uesugi Combat Phase *Battle *Encirclement *Assault (6) Oda Movement Phase (7) Uesugi Reaction Phase (8) Oda Forced March Phase (9) Oda Combat Phase
When all of the above phases are complete, the turn ends. Move the turn marker into the box of the next turn, and repeat the phases above.
5 Stacking
There is no stacking limit in this game. Any number of units may occupy one hex.
6 Force Formation
A force is a group of units that acts as one moving unit. A player moves a force as a single unit, so the player must form their units into forces under the following rules.
6-1 Commander Formation
A commander unit can lead units to form one force. This ability is called command capacity (统率力).
6-1-1 A commander unit's command capacity is shown by the number of boxes in its command box. Each box holds one unit. A commander unit with several boxes can form several units into one force. 6-1-2 As long as the units are within a commander unit's command capacity, several units may be included in one force. 6-1-3 A commander unit may only include units of the same daimyo house in its force. (Exception: 6-1-8.) 6-1-4 A commander unit may form one force from the units placed in its command box. This is called commanding (统率). 6-1-5 A great general may command samurai generals and generals. 6-1-6 A samurai general may only command generals. However, a samurai general that is commanded by a great general cannot command generals. 6-1-7 A commanded unit counts only as its strength points; it cannot use its own abilities. 6-1-8 The following great generals may command the minor daimyo units of their own side: Uesugi Kenshin, Mori Terumoto, Oda Nobunaga, Takeda Katsuyori, Ukita Naoie, Tokugawa Ieyasu. The following are minor daimyo: Ashikaga, Yamana, Hatano, Hongan-ji, Isshiki, Negoro, Kaga Ikkō, Takeda Motoaki, Saika, Miki, Bessho.
6-2 Force Types
Units placed on the map are treated as forces. A force is one of three types:
(1) a force commanded by a great general (2) a force commanded by a samurai general (3) a force consisting of a single unit
6-2-1 Units placed in a command box are commanded by the commander unit, and are therefore treated as one force.
6-3 How Forces Are Formed
Forces are formed under the following rules.
6-3-1 At the start of the game, the player forms the units in each box of the initial setup into forces. 6-3-2 Units in different hexes cannot be formed into one force. 6-3-3 Once a force is formed, it cannot be formed again during the game, except by re-formation in the Movement Phase (see 10).
7 Zone of Control
A force, or a castle, together with the six hexes around its own hex, is called a zone of control (压制地域).
7-1 Force Zone of Control
All land units can exert a zone of control.
7-1-1 A zone of control cannot cross sea or lake hexes. 7-1-2 A force garrisoning a castle (see 8) does not exert a zone of control. 7-1-3 A force's zone of control affects enemy forces and castles in the following ways. See the sections below for details: Movement effects (see 10) Supply line effects (see 9)
7-2 Castle Zone of Control
Every castle on the map exerts a zone of control over the six hexes around the castle's hex.
7-2-1 Sea, lake and far-shore hexes do not have a zone of control. 7-2-2 A castle's zone of control covers the castle's hex and the six surrounding hexes. Its effect on enemy forces differs between them, as described below: (1) The castle's own hex: same as a force's hex. Affects movement and supply lines. (2) The hexes around the castle: affects supply lines only. 7-2-3 A castle that is besieged by enemy forces (see 8) does not have a zone of control.
8 Castles
Castles on the map serve as defensive strongholds with the following important functions.
8-1 Castle Durability
A castle's durability is its capacity to withstand a siege, and the number of land units it can hold while garrisoned.
8-1-1 Castle durability is reduced by an assault (see 13-2). A reduction in durability does not change the number of units a garrison can hold. 8-1-2 During the Reinforcement step of the Start of Turn Phase, reduced durability can be restored. It cannot be raised above the original value. 8-1-3 When an assault reduces a castle's durability, place a reduced durability marker on it. 8-1-4 If an encirclement or assault result changes the castle's owner, the castle's durability is restored to the original value printed on the map.
8-2 Garrisons
A land force of a player's own side in a castle hex of its own side is called a garrison.
Even units of different daimyo houses may garrison together, as long as they are on the same side.
8-2-1 A force in a friendly castle hex may garrison the castle to avoid the following actions by the opposing player: *OVERRUN *Engagement *Field battle. However, a player who moves into the castle's hex by OVERRUN, engagement or field battle may conduct a siege in the next Combat Phase. 8-2-2 The garrisoning player places units of the opposing force on top of the garrisoning force to show that it is garrisoning.
Transcriber's note: the source's wording of 8-2-2 is unclear, as it says the garrisoning player places the opposing force's units on the garrisoning force. This is transcribed as printed; the Japanese manual should be checked.
8-2-3 A garrison cannot be lifted while even one opposing unit remains in the castle. Once no opposing units remain in the hex, the garrison is lifted immediately. 8-2-4 A garrisoning force may attack an opposing force in its castle hex during the Combat Phase (see 11). If there are several forces, the combat modifier of the highest-ranking general (武将) unit is used. If the rank is equal, the player may choose freely. The difference in combat rating counts only through this combat modifier; terrain, castle and other modifiers are not counted.
8-3 Castle Defence
Castle defence shows how hard the castle is to take by assault.
8-3-1 A castle's defence never changes. 8-3-2 A castle's defence is a modifier to assault results. It is a negative value for the attacker and a positive value for the defender.
9 Start of Turn
The Start of Turn Phase is carried out in the following order.
(1) Encirclement resolution (2) Status change (3) Mori deployment (4) Supply line check and attrition (5) Reinforcement
9-1 Encirclement Resolution
The player whose castle is besieged makes a morale-loss check. The besieged player then makes a surrender check for each besieged castle whose morale has dropped.
9-1-1 Encirclement check: roll 1D6 on the Encirclement Table according to the type of the garrisoning unit. The result is the morale the garrisoning side loses. If morale drops, place an encirclement marker showing the morale value lost. 9-1-2 Surrender check: when the besieged player's morale drops, make a surrender check for that castle. Roll 1D6 each time; if the result is lower than the morale lost, the castle surrenders immediately. 9-1-3 Surrendered castle: once a castle surrenders, it immediately belongs to the besieging side, and its garrison units are removed immediately. (Exception: navy units.)
9-2 Status Change
Find the row of the Status Change Table that matches the current victory points. Roll 2D6, and find the result by the total.
Mori Deployment: One Mori commander unit and one general unit deploy immediately. In addition, the Mori deployment roll made this turn gets +1.
Hojo Invasion: The Uesugi side immediately removes one commander unit and two general units from the map. These units do not count as victory points. This event occurs only once; any later occurrence is treated as "nothing happens."
Yoshiaki Rises: The Uesugi side may use the Ashikaga Yoshiaki unit. The restrictions on the Mori, Saika, Negoro, Ukita, Yamana, Isshiki and Takeda (Motoaki) forces are lifted, and the Uesugi side may command them freely.
Ukita Rebels: The Mori forces leave the game, and all Mori units on the map are removed. However, if Uesugi Kenshin has reached Kyoto (上洛) or the "Yoshiaki Rises" event has occurred, this effect is void. This event occurs only once.
Araki Rebellion: Araki Murashige and his retainers Nakagawa Kiyohide and Takayama Shigetomo defect from the Oda side. When this event occurs, replace each unit with the unit marked "**" to the right of its name. Immediately move Araki Murashige to Arioka Castle, Nakagawa Kiyohide to Ibaraki Castle, and Takayama Shigetomo to Takatsuki Castle. After the move, the Oda player makes a rebellion-stop check for each general. The Oda side rolls 1D6: Araki Murashige's rebellion is stopped on a result of 1, and Nakagawa Kiyohide's and Takayama Shigetomo's on a result of 1–5. If the rebellion is stopped, the general only changes position and has no other effect. A general whose rebellion is not stopped becomes a general of the Uesugi side from then on. If Araki Murashige rebels, the three are treated as one daimyo house, with Arioka Castle as its main castle. If Araki Murashige's rebellion is stopped and the other two rebel, the other two act as an independent minor daimyo, and Hanakuma Castle is used as Araki Murashige's castle. The rebellion-stop check is made only once in the game. If that general has already been killed, the check is treated as void.
Neutral–Oda: Roll 1D6 on the Minor Daimyo Table to determine which minor daimyo joins the Oda side. If that minor daimyo is not neutral, the event is treated as "void."
Neutral–Uesugi: Roll 1D6 on the Minor Daimyo Table to determine which minor daimyo joins the Uesugi side. If that minor daimyo is not on the Oda side, the event is treated as "void."
Transcriber's note: the source's condition for this event reads "not on the Oda side", which differs from the Neutral–Oda event ("not neutral"). It is transcribed as printed; the Japanese manual should be checked.
Oda–Uesugi: Roll 1D6 on the Minor Daimyo Table to determine which Oda-side minor daimyo joins the Uesugi side. If that minor daimyo is not on the Oda side, the event is treated as "void."
Uesugi–Oda: Roll 1D6 on the Minor Daimyo Table to determine which Uesugi-side minor daimyo joins the Oda side. If that minor daimyo is not on the Uesugi side, the event is treated as "void."
Saika Neutral: The Saika forces become neutral. Any Saika units that have not been removed move automatically to Saika Castle.
Saika Re-enters: If the Saika forces are neutral, they re-enter the war on the Uesugi side.
9-2-1 Special cases of status change are handled as follows.
(1) "Araki Rebellion": If the castle that the rebel must move to is already Uesugi-held, or is currently being besieged by the Uesugi side, the rebellion check is made in the general's current hex for convenience. The general moves to the designated castle only if the rebellion succeeds. If that castle is being besieged by the Uesugi side and the Oda side has garrison units there, the garrison units automatically join the besieging force. If there are no garrison units (an empty castle), the castle automatically becomes Uesugi-held. (This counts as victory points.)
(2) "Saika Neutral": When Saika is neutral, the units that return to Saika Castle become neutral together with the castle. Units of other daimyo houses in the same hex as Saika Castle move to any adjacent hex. In a rare case, if the Oda force at Saika Castle is besieged, the units returning to Saika Castle do not become neutral; they immediately join the besieging Uesugi force. If the Uesugi force at Saika Castle is besieged, the units returning to Saika Castle do not become neutral; they immediately join the garrison.
(3) "Oda–Uesugi" and "Uesugi–Oda": A unit in the same hex as an enemy unit moves to any adjacent hex. However, if it is garrisoning together with enemy units, it moves outside the castle, within the same hex.
Transcriber's note: the source's wording of this last rule is unclear and is transcribed as printed.
If the unit is being transported by navy (at sea), the defecting unit is removed together with its navy unit and is treated as killed; the side that controls the navy unit may score it as a victory point. If the unit is in the Mori Deployment box, only the Uesugi side scores the victory point.
9-3 Mori Deployment
The Mori army is the Uesugi-side daimyo house with the most units in the game, but its fighting spirit is low and it cannot act frequently. The only Mori units that can actually act are those that enter the map each turn from the Mori Deployment Table.
9-3-1 Mori Deployment Table: The Mori daimyo house rolls 1D6 on the Mori Deployment Table to determine which units deploy. Units that deploy from the table are placed in the Mori Deployment box on the map. After forming in the Mori Deployment box, the Uesugi player may move the units onto the map from the western edge hex, or transport them by navy. Whether they enter the map, are transported by sea, or remain in the box is decided freely by the Uesugi player.
9-4 Supply Line Check and Attrition
Each force that cannot establish a supply line, as described below, to its own home castle must make an attrition check and cannot receive reinforcements.
Uesugi home castle: omitted in the source. Oda home castle: omitted in the source. Neutral home castle: omitted in the source.
9-4-1 Supply line setup: a player sets up a supply line between each force and its home castle. A supply line cannot pass through the following hexes: (1) a hex containing an enemy unit (2) a hex containing an enemy castle (3) an enemy zone of control (4) sea, lake and hill terrain hexes
9-4-2 A supply line may pass through a hex containing an enemy castle if a friendly force is in that hex. 9-4-3 A supply line may pass through an enemy zone of control if a friendly force is in that hex. 9-4-4 The home castles of the Mori and Ukita armies are not on the map. A supply line that reaches the western edge of the map and connects, by water supply line, to the Mori Deployment box is treated as connected to the home castle. 9-4-5 Forces of the Ashikaga army do not need to set up supply lines. 9-4-6 Supply line setup is not limited by distance. 9-4-7 Attrition: the forces listed below must roll 1D6 on the Attrition Table to make an attrition check. (1) Forces whose supply line cannot connect to the home castle in the Start of Turn Phase. (2) Forces that fail the action value check in the Reaction Phase. (3) Forces that fail the action value check in the Forced March Phase.
If that force also cannot set up a supply line to any friendly daimyo house (whether or not it is the home castle), it counts as isolated, and the attrition roll receives a +1 modifier.
A force garrisoning a castle other than its home castle must also make an attrition check, but without the +1 isolation modifier.
9-5 Reinforcement
Steps lost in siege battles (see 13) and field battles (see 11), and reduced castle durability, can be restored.
9-5-1 Reinforcement uses each side's reinforcement table. Each side rolls 1D6 on the column for its own side. The result is the number of STEPs that may be reinforced. 9-5-2 Reinforced units must be able to set up a supply line to the home castle. If the home castle is besieged, units inside it cannot be reinforced. (Exception: water supply lines.)
The Oda army has 5 home castles (supply bases). In principle, roll 1D6 once for each home castle, 5 rolls in total. The total of these rolls is the number of STEPs the Oda army may reinforce.
9-5-3 Once the reinforcement result is determined, it is used immediately. Reinforced units must be able to set up a supply line to the home castle. Reinforcement points may be used on one force or spread among several forces. 9-5-4 For Oda reinforcement, the supply line from the home castle to the reinforced units must be considered. 9-5-5 Unused reinforcement points cannot be carried over to the next turn. 9-5-6 Units that have been removed cannot be restored. Exception: Ikkō-ikki units (Hongan-ji and Kaga). If a unit has been eliminated (全灭), reinforcement points can be used to bring it back into play. If several units have been eliminated, the reinforcement STEPs may be divided among them to bring several units back. A rebuilt Ikkō-ikki unit enters at the home castle of its Ikkō-ikki power, so it can garrison that castle if it is besieged. This applies only to the Ikkō-ikki powers. 9-5-7 A castle with reduced durability may also be restored through the reinforcement described above. Each reinforcement point restores 3 points of durability.
10 Movement
The Uesugi player may move their forces in the Uesugi Movement Phase, and movement is decided freely by the player. The Reaction Phase and the Forced March Phase also allow forces to move in the same way as the Movement Phase, but an action value check is required for each force. (Therefore a flipped unit that has suffered attrition cannot react or force march.)
10-1 Re-formation (Movement Phase only)
A player may re-form forces before moving. Re-formation takes place only in the Movement Phase. It cannot take place in the Reaction Phase, the Forced March Phase, or during a post-battle advance or retreat.
10-1-1 Forces may only be re-formed with other forces in the same hex. Forces in different hexes cannot be re-formed together. Re-formation must stay within the formation range. 10-1-2 Re-formation is done before the force moves.
10-2 Action Value Check (Reaction and Forced March Phases)
In the Reaction Phase and the Forced March Phase, a force must pass an action value check before it can move.
10-2-1 Action value check: the player designating a force to move must make an action value check using that force's action value. Roll 1D6; the check succeeds if the result is equal to or less than the force's action value. Success: the force may move. Failure: the force cannot move and must make an attrition check.
10-2-2 There is no limit on the number of forces that may make action value checks. When a check succeeds, that force moves before the next force makes its check.
10-3 Principles of Movement
Movement means moving a force from its current hex to another hex.
10-3-1 Each force moves in turn, and the order of movement is decided freely by the player. However, the next force cannot begin moving until the current force has finished. 10-3-2 Forces move one hex at a time, and the direction of movement is decided freely by the player.
10-4 Movement Method
A player moves each force using its movement points.
10-4-1 All land forces have 6 movement points. A player moves a force within its 6 movement points. 10-4-2 The movement points needed to enter a hex differ by terrain (see the Terrain Effects Table). 10-4-3 Forces cannot split or merge during movement.
10-5 Effects of Zone of Control on Movement
An enemy zone of control affects movement as follows.
10-5-1 Entering an enemy zone of control hex during movement costs 1 extra movement point, in addition to the normal cost. 10-5-2 Entering an enemy castle's hex during movement is likewise treated as entering an enemy zone of control, and costs 1 extra movement point. 10-5-3 A force that is in an enemy zone of control hex during movement, or at the start of its movement, pays no extra movement point to leave that hex. 10-5-4 A force may move freely from one enemy zone of control hex to another, within its movement points. 10-5-5 Entering an enemy zone of control hex, or an enemy castle hex that contains a friendly force, costs no extra movement.
10-6 Movement Restrictions
10-6-1 Forces cannot cross sea or lake terrain. 10-6-2 Forces cannot move into mountain hexes. 10-6-3 Forces cannot move into a hex containing a force that is not garrisoning. 10-6-4 A force that has an engagement marker cannot move, and cannot build a stockade.
10-7 Engagement
During movement, or when its movement begins in a hex adjacent to an enemy force, a force may have an engagement marker placed between the two forces. A force with an engagement marker cannot move in the Reaction Phase or the Forced March Phase until the next Combat Phase, and must fight a field battle in the Combat Phase.
10-7-1 An engagement marker may be placed on an enemy force during movement. It costs only 1 movement point, whatever the terrain cost of the enemy's hex. 10-7-2 A force with an engagement marker placed on it, and the force that placed the marker, cannot make action value checks. 10-7-3 A force with an engagement marker must attack the force in the marked hex in the next Combat Phase. The side that placed the marker is always the attacker in this battle; otherwise the usual field battle rules apply. After the field battle, the engagement marker is removed. 10-7-4 When an OVERRUN fails, place an engagement marker. The player performing the OVERRUN is treated as the side that placed the engagement marker.
Transcriber's note: the source cross-references the engagement marker to 10-8 in 12-1-9 and 14-7-3. The engagement rule is 10-7 and the stockade rule is 10-8; the source's cross-references to 10-8 are transcribed as printed.
10-8 Stockades
A force may, in any phase in which it can move, use its entire movement allowance (instead of moving) to build a stockade. (A stockade built in the Reaction Phase or the Forced March Phase requires an action value check.) Place a stockade marker on the force that builds it. A stockade marker on the defending force gives it a favourable modifier in a field battle (see 12).
10-8-1 A stockade marker stays in its hex until the force that built it has entirely left the hex, or it may be removed at any time at the will of the player who placed it.
11 Combat
In the Combat Phase, a player may attack an enemy force or attack an enemy castle. Attacks are of the following kinds.
(1) Field battle: an attack on an enemy force (see 12). (2) Assault: an attack on a castle (see 13). (3) Encirclement: besieging a castle (see 13).
12 Field Battle
A player may launch a field battle against an enemy force in the Combat Phase. In resolving a field battle, whatever the result, the side that launches the attack is called the attacker, and the side that is attacked is called the defender. Field battles are resolved with six-sided dice and the Battle Results Table, one battle at a time.
12-1 Principles of Field Battle
Field battles are resolved one at a time in the following order.
(1) The attacker and defender calculate combat strength. (2) Both sides resolve their attacks. (3) Both sides apply the battle results. (4) Decide whether to retreat or continue fighting.
After (4), both sides keep repeating (1)–(4) until one side retreats or is eliminated.
12-1-1 Before a field battle is resolved, the attacker must declare from which hex to which hex it is attacking. 12-1-2 An attacker may attack an enemy force in a hex adjacent to its own force. 12-1-3 Battles are resolved one hex at a time. When a hex holds several forces, they are treated as one force when attacked. 12-1-4 In the Combat Phase, each force may attack enemy forces in only one hex, once. It cannot attack enemy forces in several hexes at the same time. 12-1-5 If there are several enemy forces in one hex, the attacker must attack all of them together. 12-1-6 Each defending force can be attacked only once per Combat Phase. 12-1-7 Attacks cannot be made across sea or lake. 12-1-8 Battle is not compulsory; a player may freely choose whether to attack. However, a force with an engagement marker must fight. 12-1-9 Engagement marker: a force with an engagement marker must fight. A battle caused by an engagement marker has the side that placed the marker as the attacker (see 10-8).
Transcriber's note: the source cross-references the engagement marker here to 10-8; see the note at 10-7.
12-2 Resolving Attacks
Each player totals the strength of its participating forces. Strength points are the total STEPs of the units. Each player then rolls 2D6 on the Battle Results Table, in the column for its own total strength. The result is the damage dealt to the other side.
12-2-1 Modifiers. The result of the roll is modified as follows.
Attacker's modifiers: (1) If the defending force is on a mountain, or in a hex with a stockade, subtract 1 from the attacker's roll. (2) If a river lies between the attacking and defending forces, subtract 1 from the roll. (3) Combat rating difference: the attacking force's combat rating minus the defending force's combat rating is added to the roll.
Defender's modifiers: (1) If the defending force is on a mountain, or in a hex with a stockade, add 1 to the defender's roll. (2) If a river lies between the attacking and defending forces, subtract 1 from the roll. (3) Combat rating difference: the defending force's combat rating minus the attacking force's combat rating is added to the roll.
All modifiers are cumulative; for example, the source gives a defending force on a mountain with a stockade a total modifier of +2.
Transcriber's note: the source's wording of attacker modifier (3) repeats the difference, and its +2 example does not match the single mountain-or-stockade modifier listed in (1). Both are transcribed as printed; the Japanese manual should be checked.
12-2-2 Combat rating: when units are formed into a force, only the commanding unit's combat rating is used. If there are several commanding units, use the combat rating of the highest-ranking unit, in the order great general, samurai general, general. If several units share the highest rank, the player chooses freely.
12-3 Battle Results
The number from the Battle Results Table is the damage dealt to the enemy force. The player whose force takes damage reduces the STEPs of its units (flipping them).
12-3-1 When STEPs are reduced, front-side units (2-STEP units) are reduced first. 12-3-2 A 1-STEP unit that loses another STEP is removed from the game.
12-4 Retreat and Continued Battle
When every unit on one side has become a 1-STEP unit, that force must retreat. Either side may also choose to retreat at any time. If both sides still have 2-STEP units and neither intends to retreat, the battle continues, repeating (1)–(4) of 12-1.
12-4-1 Whether to retreat is declared starting with the attacker. 12-4-2 If one side retreats, all of its forces that took part in the battle must retreat. Several retreating forces may each retreat to a different hex. However, units in a formation may not leave the command box to retreat alone, or be left behind on the way. 12-4-3 A force may retreat 1–3 hexes; the player decides how far. 12-4-4 A retreating force retreats one hex at a time, away from the enemy force it fought. 12-4-5 The player chooses the direction of retreat, but a force cannot retreat into the following hexes: (1) sea or lake hexes (2) mountain hexes (3) hexes containing an enemy force 12-4-6 If a friendly castle lies on the retreat path, the player may stop the retreat and garrison that castle. Likewise, if the hex being attacked contains a friendly castle, the force may enter that castle and garrison it. 12-4-7 If units on both sides become 1-STEP units at the same time, both sides must retreat at the same time, and neither is pursued.
12-5 Pursuit
When a force retreats, the retreating force suffers one pursuit before it withdraws.
12-5-1 Whether a pursuit succeeds depends on the difference in combat rating between the two forces: (1) If the pursuer's combat rating is greater: the pursuit succeeds. (2) If they are equal: the pursuit succeeds. (3) If the retreating force's combat rating is greater: the retreating side rolls 1D6. If the result is equal to or less than the combat rating difference, the pursuit fails.
12-5-2 If the pursuit succeeds, it is resolved as a battle, using the Battle Results Table with 2D6. However, the pursuing side makes only one attack, and the retreating side does not roll to attack. If the retreating force consists of several forces, treat them as one force. 12-5-3 The only modifier to a pursuit is the combat rating difference; ignore all other modifiers.
12-6 Post-Battle Advance
A force that forces an enemy force to retreat may advance after the battle. A post-battle advance means moving the force into the hex of the retreating enemy force.
13 Siege Battles
A player may attack an enemy castle. Siege battles are of two kinds: encirclement and assault.
13-1 Encirclement
To besiege a castle, the besieging force must have more units than the garrison. Equal numbers cannot besiege.
13-1-1 Encirclement may be carried out by several forces together. 13-1-2 To show an encirclement, place an encirclement marker on the besieged force. The starting marker is the "0" marker. The number on the encirclement marker is the morale loss of the garrisoning side. 13-1-3 If a castle is besieged, the garrison cannot be lifted even if the siege is broken, as long as one enemy force remains in that hex. 13-1-4 The besieged player must make an encirclement check for the garrisoned force in the Start of Turn Phase (see 9). 13-1-5 When the besieging units equal or fall below the number of garrison units, the siege is treated as broken, and the castle's morale-loss marker is removed. 13-1-6 Encirclement continues as long as the besieging side has more land units in the castle's hex than the garrison has. The besieging units may be replaced by movement. 13-1-7 A besieging force that launches a field battle against another hex is treated as having broken the siege. But if the enemy launches a field battle against it, it is not treated as broken unless it retreats. A besieging force has no special restriction in field battles. 13-1-8 A garrisoning force may attack an enemy force in the same hex. In this case the mountain and stockade modifiers are ignored. 13-1-9 A port castle can receive supply by water supply line even when it is besieged, so no encirclement check is made for it; its morale-loss value is always 0. As a special case, a besieged port castle may use navy to carry land units into its garrison, and navy may carry garrison units away.
13-2 Assault
A player may assault an enemy castle to reduce its durability.
13-2-1 Only a force in the same hex as the enemy castle may assault it. 13-2-2 An assault may also besiege the enemy castle.
13-3 Resolving an Assault
An assault is resolved in the same way as a field battle, with the following differences.
13-3-1 Assaults are resolved one hex at a time. Several forces in the hex are treated as one force and assault together; part of the forces may not take part while the rest do not. 13-3-2 An assault continues until the castle falls or the assaulting side retreats, and is not stopped otherwise. 13-3-3 The total strength of the assaulting side is limited to three times the castle's durability shown on the map. 13-3-4 Whatever the castle's durability, the castle itself counts as 1 strength point for the garrison. 13-3-5 Modifiers. The result of the roll is modified as follows.
Assaulting side: (1) Subtract the castle's defence from the roll. (2) Compare the combat ratings of the assaulting force's commanding unit and the garrison's commanding unit: · assaulting side greater: +1 · garrison greater: −1 · equal: no modifier
Garrison: (1) Add the castle's defence to the roll. (2) Compare the combat ratings as above: · assaulting side greater: −1 · garrison greater: +1 · equal: no modifier
All modifiers are cumulative.
13-4 Battle Results
Results are applied as in a field battle, except that the garrison may choose whether its garrison STEPs or the castle's durability are reduced.
13-4-1 If the assaulting side's STEPs are reduced, front-side (2-STEP) units are reduced first. The garrison has no such restriction: it may freely choose whether a 1-STEP unit is reduced or the castle's durability is reduced. A reduction in castle durability also does not penalise the number of units the garrison may hold.
13-5 Retreat and Continued Assault
When all units of the assaulting side have become 1-STEP units, the assaulting side must retreat one hex. Alternatively, the assaulting side may roll 2D6; if the two dice show the same number, the retreat may be stopped. The assaulting side may end the assault at any time it wishes. If it does not, the assault continues, repeating (1)–(4) of 13-3.
13-5-1 If the assaulting side must retreat, the garrison may pursue. 13-5-2 Pursuit of the assaulting side works as in field battles: the commander's combat modifier and the castle's defence both count as modifiers to the roll, and the castle itself, counting as 1 strength point, may also join the pursuit. 13-5-3 When the castle's durability reaches 0, the castle falls and becomes part of the assaulting side's control (see 8), and the assault ends. All garrison units are removed.
14 OVERRUN
OVERRUN is an attempt, during movement, to remove enemy forces in adjacent hexes. Its main resolution is broadly the same as a field battle, with the following differences.
Transcriber's note: the source's numbering for this section runs 14-7-1, 14-7-2, 14-7-3, 14-7-4, 14-7-5, 14-7-6, 14-7-8, 14-7-9; there is no 14-1 to 14-6 and no 14-7-7. The numbering is transcribed as printed.
14-7-1 OVERRUN counts as a kind of movement. Entering the hex of an enemy force also costs movement points, according to the terrain. 14-7-2 A successful OVERRUN may be carried out several times, as long as movement points allow. 14-7-3 If an OVERRUN fails, place an engagement marker on the enemy force (see 10-8, as printed in the source). 14-7-4 OVERRUN follows the usual field battle sequence, but only one die roll is made. 14-7-5 If there are several enemy forces in one hex, all of them must be treated as one force for OVERRUN. 14-7-6 The result of an OVERRUN is resolved immediately, during movement. If the defender retreats, the OVERRUN is treated as successful, and the attacker may move into the hex of the enemy force. An OVERRUN cannot be pursued. 14-7-8 OVERRUN result: if either side has a 2-STEP unit, or if either side has no wish to retreat, the OVERRUN becomes an engagement (see 10-8, as printed in the source). The attacker declares first whether it retreats. 14-7-9 Retreat: retreat is the same as in a field battle (see 12-4), but neither side is pursued.
15 Killed Units
A land unit that is removed is said to be killed (讨死).
15-1 Killed Units
A killed unit does not return to the map. (Exception: Hongan-ji and Kaga Ikkō.)
15-2 Killing a Great General
If a great general is killed, all units of that daimyo house are immediately removed from the map. These units count as killed for victory points. However, its castles remain on the map as castles of that daimyo house, and are not treated as enemy castles.
16 Navy
Navy units are not treated as land units and do not exert a zone of control. They cannot directly take part in garrisoning or besieging castles, and they are special units. Their abilities are as follows.
Transcriber's note: the source's numbering for this section runs 16-1, 16-2, 16-2-1, 16-2-2, 16-2-4, 16-2-5, 16-2-6, 16-3, 16-4, 16-4-1 to 16-4-3, 16-5, 16-6. There is no 16-2-3, and the source prints the supply-line rule in 16-1 as "23-2.1" and "23-2.2"; these numbers are transcribed as printed.
16-1 Water Supply
A castle with an anchor marker (a port castle) may set up a water supply line. Water supply lines can only be set up between port castles, and, as on land, they are used for reinforcement and supply lines.
Two castles connected by water supply line cannot be fully encircled by land forces alone. So an Oda port castle around Lake Biwa does not surrender to encirclement while its supply source castle remains.
23-2.1 If the castle's hex, or the sea area it faces, is occupied by an enemy navy unit, the water supply line cannot be used. The same applies if the hex or sea area of the supply-source castle has an enemy navy unit. 23-2.2 A water supply line may be used for reinforcement (see 9-5).
16-2 Movement
A player may move its navy forces in its Movement Phase, Reaction Phase and Forced March Phase; whether to move is decided freely. Navy units need no action value check, and may move freely in the Reaction Phase and the Forced March Phase. All navy units have 1 sea movement point.
16-2-1 Principles of navy movement: sea movement means a navy unit moves from its current area to another area. A sea area is treated as a whole area, not as individual hexes (although sea areas are printed with hexes, ignore them). A player may only move navy units through the following coastal hexes and sea areas: · the Seto Inland Sea area · the Pacific area · coastal hexes adjacent to the above sea areas · the Mori Deployment box (treated as adjacent to the Seto Inland Sea area)
16-2-2 Each navy unit moves in turn, and the order of navy movement is decided freely by the player. However, another navy unit may not move until the current navy unit has finished moving. 16-2-4 When a player's navy unit enters a coastal hex (or sea area) containing an enemy navy unit, it automatically enters engagement, and an engagement marker is placed on the enemy navy unit. 16-2-5 If an enemy navy unit enters a port castle of the friendly side, and a friendly navy unit is in that port castle, the friendly navy unit is protected by the castle. The enemy navy unit in that castle is placed on top, and this is not treated as an engagement. A navy unit by itself cannot besiege; once an enemy navy unit leaves the castle, an engagement may take place. 16-2-6 Only Oda navy units may move between the Pacific sea area and the Seto Inland Sea area.
16-3 Battle
Battles between navy units take place in the same sea area or the same coastal hex. The battle rules are the same as for field battles, but there are no terrain modifiers, and no pursuit takes place. Because navy units are not treated as land units, removing them does not give victory points.
When a port castle falls through assault or encirclement, any navy units garrisoning it immediately lose the protection of the castle. If an enemy navy unit is in that castle's hex, an engagement marker is immediately placed on it.
16-4 Sea Transport of Land Units by Navy
Navy units can carry land units.
16-4-1 A navy unit with 1 transport capacity can carry 1 land unit. Any friendly land unit may be carried, even one from a different daimyo house. The land units to be carried must be in the same hex as the navy unit when its movement begins. When the navy unit's movement finishes at a coastal hex, the land units carried disembark there automatically. A navy unit in sea transport cannot stop at a hex containing enemy land units, except for a port castle that is garrisoned (13-1-9). Land units embark in the same phase using land movement, so after disembarking they cannot move again. 16-4-2 A navy unit carrying land units has a combat rating of "0" in sea battles, but may use its own combat rating. Also, land units aboard have no zone of control and cannot attack enemy land units. 16-4-3 A 1-STEP navy unit and an Oda ironclad have no transport capacity. If a navy unit in transport is reduced from 2 STEPs to 1 STEP, the land units it carries are removed immediately (treated as killed, and may be scored as victory points).
16-5 Ironclads
The Oda navy has a powerful ironclad unit, the "Kuki Yoshitaka" unit, which is placed at Toba Castle at the start of turn 7.
16-6 Reinforcement
Navy units cannot be reinforced.
17 Mori Terumoto
When a battle occurs, if Mori Terumoto is in the same hex as Kikkawa Hiroie or Kobayakawa Takakage, the player may, instead of using the combat rating of the great general Mori Terumoto, use the combat rating of one of the samurai generals, Kikkawa Hiroie or Kobayakawa Takakage.
18 Uesugi Kenshin
At the start of each turn, if the Uesugi Kenshin unit is in the capital, the "Yoshiaki Rises" event in the Status Change Table occurs automatically.
19 Ishiyama Hongan-ji
Ishiyama Hongan-ji is an extremely strong castle. Whatever unit defends it is treated as a great general for encirclement checks.
Note: the source adds, in parentheses, "watch the water supply line."
20 Neutral Castles and Forces
Neutral castles and forces do not exert a zone of control. Friendly forces of either player may move into a hex adjacent to a neutral castle or neutral force, but may not move into the hex containing a neutral castle or neutral force.
21 Victory Points
A player who gains victory points moves its victory point marker accordingly. The Uesugi side's victory point marker moves "+", and the Oda side's victory point marker moves "−". The following kinds of points are gained.
Victory points gained: Capturing a castle with durability 3: 1 point Capturing a castle with durability 4–6: 2 points Capturing a castle with durability 7–10: 3 points Capturing a castle with durability 11 or more: 4 points Removing an enemy general unit: 1 point Removing an enemy samurai general unit: 2 points Removing an enemy great general unit: 10 points
Uesugi side only, checked in each Start of Turn Phase: Uesugi land units in the capital: 5 points Uesugi Kenshin in the capital: 15 points
22 Victory Conditions
The game lasts 15 turns. The game ends automatically when one of the conditions below is met.
22-1 Sudden Death Conditions
If any of the following occurs during the game, the game ends immediately.
(1) The Uesugi Kenshin unit is removed. The Oda side wins automatically. (2) The Oda Nobunaga unit is removed. The Uesugi side wins automatically. (3) One side loses the will to fight ("flipping the table"). The other side wins automatically.
22-2 Determining the Winner
At the end of turn 15, if the Uesugi side has 30 or more victory points, the Uesugi side wins; if it has 29 or fewer, the Oda side wins.
23 Additional Units
If both players agree, any unit with a 【*】 mark to the right of its name may be placed at the start of the game, at the designated location, to join the game.
Uesugi forces, placed at Kasugayama Castle (5604): Generals: Kurokawa Kiyomi, Kaji Hidetsuna, Katori Yahei, Oguni Shigeyori
Takeda forces, placed at Tsutsujigasaki-yakata (5722): Generals: Hoshina Masanao, Nishina Morinobu, Obata Nobuzane