RulesPal
Chat
Rulebook
Imperial Bayonets: We Were Not Cowards – Sedan 1870 thumbnail

Imperial Bayonets: We Were Not Cowards – Sedan 1870

Imperial Bayonets: We Were Not Cowards – Sedan 1870 Rulebook

Table of Contents

Table of Contents

  • Series Rules
    • 2.0 Abbreviations and Glossary
    • 3.0 Important Concepts
      • 3.1 Units
      • 3.2 Rounding Conventions
      • 3.3 Stacking
      • 3.3.1 Standard Stacking Rules
      • 3.4 Zones of Control
      • 3.5 Command
      • 3.6 Line of Communications & Supply
      • 3.7 Line of Sight
      • 3.8 Disruption & Demoralization
      • 3.8.1 Disruption
      • 3.8.2 Demoralization
      • 3.9 Exclusive Rule Additions
    • 4.0 Detailed Sequence of Play
    • 5.0 Administrative Phase
      • 5.1 Supply Trace
      • 5.2 Recovery
      • 5.3 Determine Weather
      • 5.4 Determine Next Admin Phase
      • 5.5 Issue March Orders
    • 6.0 Command
      • 6.1 Command Distribution Phase
      • 6.1.1 Command Trace
    • 7.0 In Command Maneuver Phase
      • 7.1 Movement
        • 7.1.1 Engaged
        • 7.1.2 Repulse
      • 7.2 Enter Reinforcements
      • 7.3 Enter/Exit Road March
      • 7.4 Construct Improved Position
      • 7.5 Prepare Cavalry Charge (Game Specific)
      • 7.6 Destroy/Repair Bridge (Game Specific)
    • 8.0 OOC Maneuver Phase
    • 9.0 Combat Phase
      • 9.1 Bombardment Step
      • 9.2 Bombardment Procedure
      • 9.3 Cavalry Charge Step
        • 9.3.1 Cavalry Charge Table Results
      • 9.4 Combat Procedure
        • 9.4.1 Combat Result Table Outcomes
          • 9.4.1.1 Eliminations
          • 9.4.1.2 Retreats
      • 9.4.2 Shock Combat
    • 10.0 Rally Phase
    • 11.0 Disengagement Phase
  • Exclusive Rules: We Were Not Cowards – Sedan 1870
    • 2.0 Exclusive Rules
      • 2.1 Stacking Limits
      • 2.2 Division Breakdown and Recombination
      • 2.3 French Chassepot Fire
      • 2.4 Mitrailleuse Support
      • 2.5 Artillery Range & Spotting
        • 2.5.1 Artillery Defending Alone
        • 2.5.2 Krupp Steel
      • 2.6 "Death Ride" Charges
      • 2.7 River Crossings
    • 3.0 Scenarios

Series Rules

2.0 Abbreviations and Glossary

AAC – Advance After Combat: the act of moving into a hex vacated by a defender during combat. CP – Command Points: a number enclosed in brackets '[]' on Commander units. CR – Command Range: the range from Leader units to their subordinate Officers and units. DM – Demoralized: a negative status inflicted on an entire corps after taking sufficient losses. DR – Disrupted: a negative status inflicted on a force as a result of artillery bombardments. Enemy – Units which belong to your opponent and not to you. Engaged – Opposing combat units which are adjacent to one another. EZOC – Enemy Zone of Control: the six hexes adjacent to an enemy unit/stack. Force – A force refers to either a single unit, or stack of units, occupying a single hex. Initiative – All combat and Officer units possess an Initiative Rating in the center of their counter. IC – In Command: refers to units and Officers within the Command Range of their parent Officers and Commanders, respectively. IR – Initiative Rating LOS – Line of Sight: the extent of a unit or force's field of view. MA – Movement Allowance: all units possess a Movement Allowance, the rightmost value for combat units and the bottom value for leader units. MP – Movement Points: units spend Movement Points from their Movement Allowance. OOC – Out of Command: units and Officers outside the Command Range of their parent Officers and Commanders, respectively. OOS – Out of Supply: a negative status inflicted on forces unable to trace a Line of Communications to a Supply Source during the Administration Phase. SP – Strength Points: all combat units

3.0 Important Concepts

The following concepts and mechanics are essential to play Imperial Bayonets (IB):

3.1 Units

IB features three types of units: Combat, Leader, and Depot. Combat units include Infantry, Cavalry, Artillery, and Horse Artillery. They are used to take and control hexes and attack other enemy Combat units. Leader units include Commanders, Officer-Commanders, and Officers, and they provide command and control functions for units and subordinate Leaders. Depot units are supply units that help keep Combat units functioning at full efficiency.

In the lower left of each Combat unit is the unit's Strength Points (SP), to the right of SP is the unit's Initiative and to the right of Initiative is the unit's Movement Allowance (MA). A colored bar on the top of a unit indicates which corps the unit belongs to. The color of the unit-type (infantry, cavalry, artillery etc.) indicates units that belong to the same division within a corps.

Commander units have a number of Command Points (CP) and their MA. Officer units have an Initiative encased in parenthesis and their MA. Initiative is used to activate an Officer when it is outside the command range of a higher-level Commander. Officer-Commander units feature a CP value of [1] that may only be spent on the formation they command. Officer-Commanders do not make initiative checks.

Depot units provide supply for the corps they are assigned to, so long as they can trace an open Line of Communications (LOC, see 3.5) to their main source of supply as defined in the Exclusive Rules. Both Leader and Depot units can be captured by enemy forces and counted towards Victory Points (VP).

See game Exclusive Rules for infographics explaining the game specific unit counters.

3.2 Rounding Conventions

When left with a fraction as a result of game mechanics and calculations, always round down any remainder unless explicitly stated otherwise.

3.3 Stacking

Stacking refers to more than one unit occupying the same hex. Rules for stacking will vary throughout the different games in the IB series as defined in the Exclusive Rules for each game. The following rules apply to all games in the series.

Stacking limits are only enforced at the end of any given phase, meaning units may temporarily overstack during movement, combat or as a result of a retreat so long that at the end of the phase the units are no longer overstacked. If units are overstacked at the end of any phase, any excess units must be eliminated at the owning player's choice. Exception: in the case of overstacking as a result of retreat, the opposing player chooses which units to eliminate.

Leader units never count towards stacking limits and, in addition, may allow players to increase the stacking limit in the hexes that a leader occupies (see 3.3.1 and the Exclusive Rules). A Combat unit may not stack with a Depot unit at any time, even temporarily. If forced to do so, the Combat unit is instead eliminated.

Important: It costs Combat units +1 MP to enter a hex with other Combat units during a Movement Phase. Combat units expend no extra MP when leaving a stack with other Combat units, or when entering a hex with only non-Combat units.

Series Rules Note: Throughout the rest of these rules both a stack and a single unit will sometimes be referred to as a 'force'.

3.3.1 Standard Stacking Rules

The following stacking rules are considered standard for Combat units throughout the series unless specified otherwise in Exclusive Rules:

  • Normal Stacking: Two Combat units of any type may stack together.
  • Division Stacking: Three Combat units of the same division (unit-type color) may stack together, two of which may be infantry.
  • Corps Stacking: Five Combat units of the same corps, three of which may be infantry, may stack together if either the Officer-Commander or the Army Commander is in the same hex.

3.4 Zones of Control

All Combat units not marked Disrupted (DR), Demoralized (DM), or Out of Supply (OOS) project a Zone of Control (ZOC) into the six hexes immediately adjacent to the hex they occupy. Exception: A ZOC does not project across a major river hexside.

A unit must stop moving if it enters an Enemy Zone of Control (EZOC). If a unit begins its movement in an EZOC, it may freely exit and continue moving normally. It may not move directly from one EZOC hex into another EZOC hex, even if the target hex is occupied by a friendly unit. A unit which retreats into an EZOC is eliminated even if the EZOC is occupied by a friendly unit. A ZOC does not change the control of a hex (see Exclusive Rules for specific Victory conditions). Control is only conferred by the physical presence of a unit in a hex.

3.5 Command

Command is an abstraction of the organizational and administrative capacity of armies. Army Commanders are at the top of the Chain of Command. Subordinate to them are Officer-Commanders, with Officer leaders being subordinate to them. Non-leader units are at the bottom of the Chain of Command. A unit or Officer's parent refers to a Leader unit higher in the Chain of Command.

During the active player's Command Phase, the phasing player determines which of their Combat units and Officers are within Command Range (CR) of their parent Officers (for units) or Commanders (for Officers or Units). Officers have a CR of 3 while Commanders have a CR of 4. Units within CR of a parent Leader are considered In Command (IC), while Officers and units outside of a parent Leader's CR are considered Out of Command (OOC) and are marked with OOC markers. The Command status of units and leaders will determine what forces will be able to activate freely and when during the upcoming IC and OOC Maneuver Phases. Units that are within CR of their parent officer, but that Officer is OOC from its parent leader, count as OOC.

Important: An EZOC will block a friendly Leader's CR unless a friendly force occupies the EZOC hex.

3.6 Line of Communications & Supply

A Line of Communications (LOC) refers to a unit's ability to draw Supply and function at full capacity. A LOC is made up of two components: Overland and Road. The Overland component is a line of no more than 14 hexes from a Combat unit to its assigned Depot unit. The Road component is a line of no more than three hexes from a Depot to a road hex where that road hex can trace an unbroken line of road hexes to the side's friendly map edge, or a specific on-map location (defined in the Exclusive Rules for each game).

During the Administration Phase both players must determine if each force on the board can trace a valid LOC. Forces which cannot trace a LOC at this time are marked as OOS. Forces marked OOS suffer the same effects as Demoralization (see 3.8.2).

3.7 Line of Sight

An artillery unit can conduct ranged fire against an enemy force in a hex within its Line of Sight (LOS). By default, combat units have a LOS of three hexes, though when looking at a target which is at a lower elevation than the firing unit, the firing unit's LOS is increased by one hex for each level of elevation above its target. A simple way to check for extra LOS hexes is to subtract the target's elevation from the firing unit's elevation, with the result being the number of hexes added to the normal LOS limit of three.

For example, unit A wants to check if unit B is within its LOS. Unit A is 5 hexes away from unit B, but unit A occupies a hex 2 levels of elevation higher than unit B. Therefore, unit A's LOS is increased to 5 hexes.

A LOS must be free of combat and supply units, non-clear terrain (unless specified otherwise in Exclusive Rules) and any elevation levels higher than the firing unit. A unit at a higher elevation can see a hex beyond an intervening hex (Blocking Terrain, friendly or enemy units, etc.) on the next lower elevation, but only if the distance in hexes from the intervening hex to the target hex is equal to or greater than half of the distance from the firing unit to the target hex.

3.8 Disruption & Demoralization

Disruption and Demoralization are both negative statuses that affect Combat units.

3.8.1 Disruption

Enemy artillery fire causes Disruption. Units automatically recover from Disruption during the Rally Phase of their next turn. Disrupted units halve their SP for purposes of combat and do not project a ZOC.

3.8.2 Demoralization

Demoralization occurs when a corps or equivalent organization loses a certain level of SP as marked on the Demoralization Table provided with each game. As SP are eliminated players track the number of SP lost using the Morale Markers on the Demoralization Table. Once a corps reaches its Demoralization Number, that corps is Demoralized. Forces within a Demoralized corps remain Demoralized until enough forces return to the map through Recovery (see 5.2) to push their Morale Marker to a value greater than the formation's Demoralization Number. Players move Morale Markers up the Demoralization Table equal to the SP total of step-reduced forces returned to the map through Recovery.

Demoralization has the following effects:

  • Unit initiative is reduced by 1;
  • Unit SP is halved;
  • Units may not Advance After Combat (AAC);
  • Units may not benefit from Improved Positions (IP).

Demoralized units may still:

  • Receive March Orders.
  • Enter and Exit Road March.

3.9 Exclusive Rule Additions

Exclusive Rules will generally expand upon the series rules, but in some cases will contradict them. If there is a conflict between the Series Rules and Exclusive Rules, the Exclusive Rules take precedence.

4.0 Detailed Sequence of Play

The following sequence of play consists of a full game turn of Imperial Bayonets.

Administration Phase (Occasional)

  1. Check all forces on map to see if they can trace a LOC. OOS forces that can now trace a valid LOC remove their OOS markers. Forces unable to trace a LOC are marked OOS.
  2. Place OOC marker on Officers attempting Recovery for the turn.
  3. Eliminated units in the Units Awaiting Recovery (UAR) box may attempt to re-enter the map by making Initiative Checks. Demoralized units attempting Recovery which roll a 5-6 for their Initiative Check are placed in the Permanently Eliminated Units (PEU) box. Recovered units are placed underneath their parent Officers.
  4. Determine the weather (Optional).
  5. Roll 1d6 to decide how many turns until the next Administration Phase or follow Exclusive Rules if specified.
  6. Issue March Orders.

First Player Turn

  1. Command Distribution Phase: Army Commanders distribute CPs to Officers and eligible Combat units within their Command Range. Forces not placed IC are marked with OOC markers. Officers not placed IC are flipped to their OOC side.
  2. IC Maneuver Phase: Players may do the following in any order with units that are IC:
    • Move units
    • Enter Reinforcements
    • Enter and Exit Road March
    • Construct IP (game specific)
    • Prepare Cavalry Charge (game specific)
    • Destroy and Repair Bridges (game specific)
  3. IC Bombardment Phase: Eligible Artillery units may fire at enemy units within LOS.
  4. IC Combat Phase: Each enemy unit in a friendly ZOC must be attacked. Follow the combat procedure rules.
  5. OOC Activation Phase: Each officer marked OOC may make an Initiative check, rolling 1D6.
    • If the result is greater than the Officer's initiative, all units subordinate to the Officer and within the Officer's CR cannot activate.
    • If the result is less than the Officer's initiative, all subordinate forces within the Officer's CR may activate (though the forces remain OOC). OOC units which activate in this way may Construct IPs, Prepare Cavalry Charges, and Destroy and Repair Bridges though they may never Advance after Combat (AAC).
    • A result equal to an Officer's initiative means subordinate units within the Officer's CR can activate but Infantry and Artillery reduce MA by 2 and Cavalry reduce MA by 3 (the Officer unit may be inverted to signify this).
    • Each activated force performs its own Maneuver, Bombardment and Combat Phase, before another force is activated.
    • After all desired forces within the CR of an Officer have been activated, forces not within the CR of an Officer who attempted an Initiative check then make Initiative Checks to activate in the same way. (Note: if a unit is within the CR of its parent Officer the unit may not perform an Initiative check unless the Officer has already decided not to perform one. If the Officer did perform one, regardless of its success, no subordinate unit in its CR may attempt its own Initiative check). Always use the initiative of the highest SP unit in a force.

Second Player Turn

  1. Repeat steps 1-10. Once complete, move the Game Turn marker to the next turn.

Night Turn Sequence of Play

First Player Turn

  1. Disengagement Phase
  2. Rally Phase

5.0 Administrative Phase

The Administrative (Admin) phase is when players check for supply and recover units from the UAR box. Depending on what is stated in the Exclusive Rules, the Admin Phase may occur randomly or may be marked for certain turns on the Turn Record Chart (TRC).

5.1 Supply Trace

The first step of the Admin phase is for both players to simultaneously check all on-map forces to see if they can trace a LOC (see 3.5). OOS forces which can now trace a LOC remove their OOS marker and are back in supply. Forces that are unable to trace supply are marked with OOS markers and suffer the effects of Demoralization (see 3.7.2). This means, that units could be OOS for multiple turns depending on when the next Admin Phase occurs.

[Editor's note: the printed cross-references in 5.1 (to "3.5" for LOC and "3.7.2" for Demoralization) point to 3.6 and 3.8.2 in the same rules; they are transcribed as printed.]

5.2 Recovery

After adjudicating supply both players simultaneously attempt to bring eliminated units out of the UAR box and back onto the map. Officers attempting Recovery cannot be in an EZOC. They are flipped to their OOC side and may not be used to command units during the same turn they Recover eliminated units. Recovery is attempted by each unit making an Initiative check and if successful, the eliminated unit is taken out of the UAR box and placed underneath the appropriate Officer. If unsuccessful, the eliminated unit is left inside the UAR box. Recovered units always return to the map with a Step Loss., therefore 1 step units are always permanently eliminated – this includes step-reduced units.

A Demoralized corps may only exit the Demoralized state using Recovery. Players add the step-reduced SP value of the unit returning to the map to its Corps' Morale marker, reducing the Morale marker a number of boxes to represent the replenished strength. A Demoralized unit attempting Recovery uses its printed Initiative (i.e. it does not lower its initiative by 1 as if it were on the map). However, if a Demoralized unit attempting Recovery rolls a 5-6 on its Initiative check, it is instead permanently eliminated. Officer-Commanders have an initiative of 3 for purposes of Recovery.

If an Officer has been captured by an opposing player, no units subordinate to that officer may attempt Recovery (corps Leaders may not attempt recovery since they do not have an initiative), but are left in the UAR box (they are not counted toward enemy VP at the end of the game even though they are in effect now permanently eliminated).

5.3 Determine Weather

The Exclusive Rules for each game will include both historical and variant weather. If players are using the variant weather rules, in this phase either player rolls 1d6 to determine the weather until the next Admin phase. Weather rules are specified in the Exclusive Rules.

5.4 Determine Next Admin Phase

Once all the other procedures of the Admin phase are completed, either player rolls 1d6 to determine how many turns in advance the next Admin Phase will take place. Exclusive Rules may instead set various turns to have Admin Phases or add modifiers to this roll.

5.5 Issue March Orders

March Orders are special orders which allow units to remain IC regardless of the distance from an Officer or Commander. Exclusive Rules will dictate how many March Orders each side may issue during each Admin Phase. To issue a March Order, a player takes a piece of paper and writes down the units (or divisions, corps, etc.) being issued the order and a town or city hex as a destination. The paper is hidden from the opposing player until the units under March Orders reach their destination, then the note is revealed to the opponent.

Units may exit March Orders in or adjacent to the destination hex chosen. It costs no extra MPs to leave March Orders, but units leaving March Orders are temporarily Demoralized until the Rally phase of the current turn. Units may not exit March Orders earlier than intended unless interrupted by enemy units.

6.0 Command

Command is an abstraction of the organizational and administrative capacities of leaders on the ground. Units that are in command can freely act during the IC Maneuver Phase and cooperate in bombardments and combat with other units that are IC. Units which are IC have more options when activated than do OOC units. In combat only forces which are IC may Advance After Combat.

6.1 Command Distribution Phase

Only Commanders can distribute Command Points (CP) to forces and Officers within their CR. A Commander can place a number of Officers and a number of forces IC equal to his CP value. The exception to this rule is Officer-Commanders who always have a CP value of [1], which can only be used to put their subordinate unit's IC and may do so even when outside the CR of a higher-level Commander. IC markers may be used to designate which Officers and individual stacks are receiving CP. Forces and Officers which did not receive CP are marked as OOC.

Note: Players are encouraged to use information markers as best they see fit and in the way that makes most sense to them relative to the rules.

6.1.1 Command Trace

To distribute CP to a subordinate Officer or to a force, a path of hexes equal to the Commander's CR must be traced from the Commander to the Officer or the force. Similarly, to be IC a force must be able to trace a path of hexes to its superior Officer. Commanders have a CR of 4 and Officers have a CR of 3. A CR trace is not affected by terrain but cannot be traced through an enemy combat unit or an EZOC (except when the EZOC is occupied by a friendly force).

7.0 In Command Maneuver Phase

The principal advantage of being IC is being in complete control of your units. Units from different corps may cooperate to attack enemy forces and may perform movement-related tasks in any order they please. All units that are IC may act during the IC Maneuver Phase, but they are not required to move or take any action if the player chooses not to do so. When they are in IC, activated forces can perform one of the following actions.

7.1 Movement

Forces spend Movement Points (MP) from their MA (3.1) according to the Terrain Effects Chart (TEC) while moving from hex to adjacent hex. An IC force may use its entire MA to move. Once a force has spent MP equal to its MA (use the lowest MA in the case of a stack) it must stop moving. Once a force moves into an EZOC, it must immediately stop moving. Note that units moving across hexside terrain pay those MP costs as stated on the TEC in addition to the MP cost of the hex being entered.

7.1.1 Engaged

Units that begin the IC Maneuver Phase in an EZOC may not move or conduct any other actions during the IC Maneuver Phase as they are considered to be Engaged. They may only leave an Engagement through retreat as a result of combat, a Repulse, or during the Disengagement Phase of a Night Turn.

7.1.2 Repulse

A currently active engaged force which has an SP ratio of at least 5:1 against the enemy forces with which it is engaged and has enough remaining MP to theoretically enter the enemy hex may attempt a repulse against an engaged enemy force. If eligible, a Repulse is performed by immediately performing the Combat Procedure (see 9.4). Any result other than a Dr or DE indicates a failed repulse, a Repulse marker is placed on the attacking force and that force must fight the engaged force in the upcoming combat phase with a -2 column shift penalty on the CRT. Otherwise, the defending force retreats 1 hex and is marked with a Repulse marker, suffering the -2 column shift penalty in any upcoming combat. A repulsing force must move into a hex vacated by a successful Repulse.

7.2 Enter Reinforcements

Units scheduled to enter the map on the current game turn are automatically IC and may utilize Road March or March Orders. Units may enter in legal stacks or individually and are lined up off-map in imaginary hexes extending from their entry hex, hence MPs are accumulated for each force entering the map at the same hex. Example: Unit A enters the map using normal movement into a clear hex and spends 1 MP. Unit B enters the map using normal movement through the same hex spends 2MP moving into the same hex. Unit C entering the map at the same hex would spend 3MP etc. If these units were using Road March, then the example would go 0.5, 1, 1.5 etc.

If an entry hex is blocked by the presence of an enemy unit, units may not enter through that hex this turn. If an EZOC projects into a reinforcement entry hex, reinforcements may move into the entry hex but no further.

7.3 Enter/Exit Road March

Road March is a special mode of movement which allows units to move along congruent Road hexes at the rate of 0.5 MP per Road hex. Units can enter Road March in any type of terrain. It costs units 1 MP to enter or exit Road March, regardless of the terrain they occupy. A unit in Road March may never be adjacent to other units in Road March, and a unit in Road March may not stack with any other units except for Leaders.

When entering Road March, a Road March marker is placed behind a combat unit, and a chain of alternating units and Road March markers may be made. As long as the first unit in a chain of units in Road March is IC, all other units behind that first unit are automatically IC. If an enemy unit moves next to a friendly unit in Road March that unit immediately leaves Road March and is DM until the Rally Phase of its own turn. Units under March Orders may utilize Road March. Units in Road March do not pay hexside costs for crossing bridges, but they do pay additional hexside costs for moving upslope. Some games in the series may allow units in Road March more capabilities depending on the Roads depicted in game.

7.4 Construct Improved Position

Each game's Exclusive Rules will dictate whether or not an Improved Position (IP) can be built during a game turn. To construct an IP an infantry unit must spend its entire MA in a clear or woods hex, placing an Under-Construction (U-C) marker on top of the unit. That unit may not move nor conduct combat for the remainder of the turn. At the start of the IC phase of the next turn roll 1d6 for each infantry unit building the IP (maximum of 2); on a 1-2, the IP is constructed, and the U-C marker is flipped to its IP side, otherwise the U-C marker remains for another turn unless the player decides to voluntarily remove it. Players receive a -1 Die Roll Modifier (DRM) for each Construct IP attempt after the first. If an enemy unit moves adjacent to a friendly unit that is under an U-C marker, the friendly unit immediately removes its U-C marker.

OOC units which successfully activate may construct IPs and perform the same functions as stated above at the start of the OOC Maneuver Phase.

No more than two infantry units and 1 artillery unit may occupy an IP at the end of any given phase. During combat, Infantry units (only) defending in an IP hex double their SP. An IP marker is removed as soon as there are no Infantry units occupying the same hex.

7.5 Prepare Cavalry Charge (Game Specific)

If the Exclusive Rules state that Cavalry Charges are allowed, non-DR/DM cavalry forces which are within LOS of an enemy force, can trace a straight line of clear hexes only (no slopes or other terrain types allowed) to the enemy force, and chooses not to move during their turn, may perform Cavalry Charges during the Combat Phase. OOC units which successfully activate may prepare Cavalry Charges as stated above during the OOC Maneuver Phase and perform the Cavalry Charge during the OOC Combat Phase.

Players place CHARGE! Markers on top of eligible cavalry forces they wish to perform Cavalry Charges. See the Combat Procedure (9.3) for how to perform Cavalry Charges during the Combat Phase.

7.6 Destroy/Repair Bridge (Game Specific)

If the Exclusive Rules state that Destroying or Repairing bridges is allowed, an infantry unit that begins movement adjacent to a bridge hexside may spend its total MA in order to attempt to destroy a bridge. Only one attempt may be made per bridge even if more than one infantry unit is present (unlike IPs). The attempt is made by rolling 1d6; on a result of 1-2 the bridge is destroyed and a Bridge Destroyed marker is placed on the bridge hexside. The same process may be used to repair destroyed bridges, either using the Bridge Repaired marker or just removing the Bridge Destroyed marker.

8.0 OOC Maneuver Phase

The OOC Maneuver Phase is for units and Officers which did not receive any CP during the Command Phase. All forces marked OOC may attempt to activate during the OOC Maneuver Phase. An Officer may attempt to activate all subordinate forces within its CR, or an individual force may attempt to activate itself by making an Initiative Check with the highest SP unit in the stack.

  • If the result is greater than the Officer's initiative, this means no forces within the Officer's CR can move/activate.
  • If the result is less than the Officer's initiative, the Officer flips back to its IC side and all forces within the Officer's CR may activate (though they remain OOC). OOC units which activate in this way may construct IPs, prepare Cavalry Charges, and Destroy or Repair Bridges.
  • A result equal to an Officer's initiative means that units can activate but Infantry and Artillery reduce MA by 2, and Cavalry reduce MA by 3 (the Officer may be inverted to signify this).
  • Important: OOC units never AAC.

Each activated force performs its own Maneuver, Bombardment and Combat phase. After all desired corps have been activated, stacks outside of the CR of Officers may then make Initiative Checks to activate using the same results as above. A player may choose to end the OOC Maneuver phase after all, some, or none of their formations have attempted to activate. An activated stack need not stay together as individual units may move on their own.

9.0 Combat Phase

During a Combat Phase, activated units may cooperate together in Bombardments, perform Cavalry Charges, and resolve combat between adjacent forces. During a Combat Phase, all enemies in a friendly ZOC must be attacked. This requirement does not apply to friendly units inside Fortress, Town or City hexes. Combat consists of several steps performed in order by activated forces.

During the IC Combat Phase, all activated units may cooperate on attacks against adjacent enemy units, so long as all eligible enemy units are attacked. During an OOC Combat Phase, only the activated stack may attack enemy units, but units in the same stack may attack different enemy units in their ZOC, so long as all eligible enemy units are attacked. The following steps make up the Combat Phase:

  1. Bombardment Step.
  2. Cavalry Charge Step.
  3. Combat Step.

9.1 Bombardment Step

During the Bombardment Step, friendly activated Artillery units may fire at enemy units within their LOS. Units may not fire through friendly or enemy units unless specified in Exclusive Rules. Artillery units on a higher elevation may bombard over a unit beneath and adjacent to them as an exception to the above rule. The range and modifiers for artillery fire are covered in each game's Exclusive Rules. Note that Artillery units adjacent to enemy units may not Bombard and must take part in the Combat Phase unless specified by Exclusive Rules. Important: Bombarding an enemy hex frees up friendly units adjacent to the enemy from being required to attack the bombarded hex.

9.2 Bombardment Procedure

For each enemy target add the SP values of all Artillery units who wish to fire at the target hex. This value may be modified by terrain or other conditions specified in Exclusive Rules. Once the total number of eligible Artillery SP is determined that number is referenced against the Artillery Result Table (ART) using whatever column is closest to the left of the modified total artillery SP. The bombarding player then rolls 1d6 and references the ART. This die roll is modified by -1 when firing at a target at a higher elevation and by +1 when targeting a lower elevation target. (Exclusive Rules may specify more DRM.) The ART lists different effects of bombardment:

  • Dr – Defender retreats one hex
  • Dr # – Defender retreats a number of hexes equal to #
  • DR – Disrupted.
  • 1R – Step Reduction + Disrupted.

Important: If an enemy hex is vacated due to the result of a bombardment, eligible activated units may immediately AAC. Units that AAC must then commit to any Engagements generated by the AAC during the upcoming combat phase.

9.3 Cavalry Charge Step

After Bombardment, any activated Cavalry units that prepared a charge during the last turn may now execute a Cavalry Charge. Charging Cavalry units may spend up to their entire MA moving into an engaged enemy-occupied hex. Before moving into the enemy-occupied hex, the charging player rolls on the Cavalry Charge Table (CCT) to determine if the Cavalry Charge is successful. Divide the attacker's strength by the defender's strength, round down any remainder and locate the closest ratio in the columns on the CCT.

If the Cavalry Charge is successful, the enemy hex is Overrun, and the charging units enter the enemy occupied hex; they are not included in the upcoming combat resolution but are counted for purposes of the Combined Arms attacker shift. Cavalry units charging towards a target may only move into clear hexes while charging and may not cross any non-clear hexsides such as slopes or rivers. Cavalry units may not violate stacking limits while Charging at any time.

9.3.1 Cavalry Charge Table Results

The CCT lists the different results of Cavalry Charges:

  • OR – Overrun, friendly charging units are placed in the enemy hex.
  • CR – Cavalry retreats one hex
  • CR # – Cavalry retreats # hexes
  • Ae – Attacker Eliminated – roll 1d6 for each charging unit, 1-4 places them into the UAR box, otherwise they are placed into the PEU box.

9.4 Combat Procedure

Once all Cavalry Charges have been resolved by the attacker, the attacker must then resolve all Engagements using the following combat procedure:

  1. Total Attacking and Defending SP.
  2. Modify Attacking and Defending SP by relevant hex-terrain or unit-status.
  3. Divide modified Attacker SP total by modified Defender SP total, round down any remainder and locate the closest column on the CRT.
  4. Attacker rolls 1d6 modified by any relevant DRM and players immediately apply results listed on the CRT.
9.4.1 Combat Result Table Outcomes

The following results are possible on the CRT:

  • De – Defender eliminated.
  • DR – Defender retreats one hex
  • Dr # – Defender retreats listed number of hexes
  • Ae – Attacker eliminated.
  • Ar – Attacker retreats one hex
  • Ar # – Attacker retreats listed number of hexes
  • Ar* – Possible Shock Combat; treat as an Ar unless combat is performed across a Bridge hexside or into a Woods or Town hex, then treat as Sk.
  • Sk – Shock Combat, see the Shock Combat (9.4.2).
  • Ex – Exchange, defender is eliminated, attacker must eliminate units equal to at least half of the eliminated defending SP (this can sometimes result in both sides getting eliminated if a single attacking unit is the only unit eligible to be eliminated for example.)
9.4.1.1 Eliminations

Whenever units are to be eliminated, they are generally placed into the UAR or PEU box depending on the circumstances surrounding their elimination. If a unit is eliminated by retreating into an EZOC, a die is rolled to determine which box the eliminated unit is placed into; 1-4 places it in the UAR box while a result of 5-6 permanently eliminates the unit (place it in PEU box). Note that 1-step units (units with no step-reduction indicator on their backside or already are on their step-reduced side), are always permanently eliminated and placed in the PEU box when eliminated.

Whenever a unit is eliminated in combat via an Ae, De or Ex result, a check is made to see if the eliminated units could have been able to retreat 1-2 hexes; if not, these units are placed in the PEU box.

9.4.1.2 Retreats

Forces can be called on to retreat as a result of bombardments, repulses and combat. Units called on to retreat must move a number of hexes shown in the CRT result towards a source of supply. Exclusive Rules may feature a Retreat Compass showcasing in what directions units from each side are allowed to retreat. Units may violate stacking limits during a retreat but must conform to stacking limits by the end of the Combat Phase or else excess units are eliminated by the offending player until Stacking Limits are correctly observed again. Units forced to retreat into an EZOC are eliminated as described above (9.4.1.1). Units that would be forced to retreat either into occupied enemy hexes or impassable terrain are automatically permanently eliminated and placed in the PEU Box.

9.4.2 Shock Combat

Shock Combat is a special extension of regular combat which simulates forces coming to physical blows at the tip of a bayonet. Whenever a Sk or eligible Ar* result is generated in combat, players immediately resolve Shock Combat. Each player rolls 1d3 (1-2 = 1, 3-4 = 2, 5-6 = 3) and adds the result to the initiative of the highest SP unit involved in the combat – this unit is called the Lead unit in Shock Combat.

After adding the 1d3 result to their Lead unit's initiative, the two players compare their modified Initiative on the Shock Combat Table (SKT) and apply the listed result. Shock Combat results are read the same way as Combat results except that they also include 1R results (as with bombardments) which force the highest SP unit on each side to suffer a step-loss.

10.0 Rally Phase

After all eligible combat has been resolved, the phasing player rallies their on-map forces. All forces in supply recover from DR, DM and temporary DM (from Force Marches). Forces which are OOS during a Rally Phase do not recover from DR and DM, but do recover from temporary DM.

11.0 Disengagement Phase

The Disengagement Phase only takes place on night turns and is the only time units may move outside of an EZOC outside of a retreat. Units ignore EZOCs during the Disengagement Phase but must move in the direction of a supply source, in other words, players may not use the disengagement phase to gain ground, but retreat back towards their source of supply.

Exclusive Rules: We Were Not Cowards – Sedan 1870

The following rules apply for all scenarios in WWNC.

2.0 Exclusive Rules

2.1 Stacking Limits

The normal stacking limit is two units of any type, only one of which may be an infantry division (xx) or brigade(x) except:

  • 2 infantry brigades of the same division may stack together in addition to one additional non-infantry unit of the same division.
  • In hexes occupied by an Officer or Leader, up to two infantry divisions along with up to three non-infantry units of the same corps, or up to three infantry brigades and up to two non-infantry units of the same corps may stack together.
  • Infantry units with an SP value of 1 do not contribute towards stacking limits and may stack freely.

2.2 Division Breakdown and Recombination

During a player's own movement phase, before a force spends any MP, units with a yellow circle with a number inside are breakdown units that the player may attempt to deploy. The Prussian player may always breakdown or recombine divisions (from full-strength brigades only) before spending any movement, by simply exchanging the larger units for their component units. They then may spend MP and operate as normal. The Prussian player may set up their units as either brigades or divisions at their discretion.

All French units start the game as divisions. French units may attempt to breakdown before spending MP by making an initiative check. If passed, the unit breaks down successfully, otherwise the unit loses 2 MP and then may move with its remaining MA.

2.3 French Chassepot Fire

Prussian units pay +1 MP to enter a French ZOC. (This simulates the French approaching fire given their superior rifles.)

2.4 Mitrailleuse Support

When used in combat against an adjacent opponent, French artillery units multiply their SP value by 1.5. This bonus does not apply when defending in combat alone in a hex (see 2.5.1). (The French would place their Mitrailleuses with their artillery, but they were in reality more effective as direct infantry support.)

2.5 Artillery Range & Spotting

French artillery have a range of 4 hexes and halve their SP when firing at targets 4 hexes away. Prussian artillery has a range of 6 hexes and halve their SP when firing at targets 6 hexes away. Given that both types of artillery can fire beyond their range of sight, units beyond the LOS of an artillery unit must be "spotted" by a friendly unit in the same division/corps within 3 hexes of the artillery unit. (Clarification: division-level artillery must have targets spotted by friendly units of the same division, corps-level artillery can have targets spotted for it by any units in the same corps.)

2.5.1 Artillery Defending Alone

Whenever artillery defends solely in a hex, not stacked with any other friendly non-artillery unit, their defense strength is halved.

2.5.2 Krupp Steel

When Prussian artillery bombards a target within a range of 2 hexes, they receive a +1 DRM on the bombardment. Remember that artillery which bombards may not be used in combat.

2.6 "Death Ride" Charges

When initiating a cavalry charge with an eligible cavalry force, the phasing player may declare the charge to be a "Death Ride" Charge before performing the charge. Once inside the enemy hex, the charging player rolls on the charge table as normal, however there are only 2 possible outcomes. An OR result causes the defending forces' elimination. For each unit eliminated through a "Death Ride" Charge, roll a die. On a result of 1-4, they are eliminated and placed in the Units Awaiting Recovery box, otherwise they are permanently eliminated. Attacking cavalry which fails to eliminate a defending force during a "Death Ride" are permanently eliminated.

2.7 River Crossings

Normally, units may not move through major river hexsides; however, if an infantry unit which starts its movement adjacent to a major river hexside expends all of its movement, that unit may cross the major river hexside. Starting the following turn, so long as the unit which crossed the major river hexside does not move, that unit may function as a bridge for other forces allowing them to cross at a movement cost of +1 MP (even in Road March). Both armies had access to pontoon bridges, they took some time to deploy and stabilize.

3.0 Scenarios

The following scenarios comprise several various situations related to the battle of Sedan. They include the Historical Day of Battle, What-If Approach to Battle, and Free Setup scenarios. The French always setup first, followed by the Prussian forces. Setup instructions are given as follows: Corps w/i # hex of #. This translates to: all units of a stated corps are placed within so many hexes of the hex or hexes specified. Remember that all French forces must setup as divisions, while Prussian forces may set up as brigades or divisions at their option. A divisional OOB player aid is included to help players organize their divisions and brigades off-map before the game begins.

3.1 Historical Action at La Moncelle (Introductory Scenario)

This scenario features a small section of the greater battle of Sedan on September 1st, 1870 in order to familiarize players with the game mechanics. The scenario lasts from the 04:00 turn to the 12:00 turn. This action (also called the battle of Bazeilles) was one of the brighter episodes of the day for the French. The French XII corps, the largest of the French, enjoyed an elevated position on the southeast approach into Sedan. At the same time, it was where Napoleon III ordered MacMahon to break out of the Prussian encirclement. MacMahon would be wounded right as the fighting started around 06:00. Eventually, the sheer weight of numbers forced the French to surrender but the French combatants were given honors by their Prussian counterparts for their heroism.

3.1.1 French Setup

XII Corps & MacMahon: w/i 1 hex of 1829, 1729, 1628, 1529, 1428, 1328, 1228 (from Daigny south toward Bazeilles)

3.1.2 Prussian Setup

III Army

  • IB Corps: w/i 2 hexes of 0430

Army of the Meuse

  • Saxon Corps & Fr. Karl: w/i 1 hex of 1534 (Rubecourt)
  • IV Corps: w/i 2 hexes of 1136 (Douzy)
3.1.3 Special Scenario Rules

These rules are in effect for the La Moncelle scenario only.

3.1.3.1 Playing Area Restrictions

Units on both sides may not move north of hex-row 20XX or west of hex-column XX24. If forced to do so they are instead eliminated.

3.1.3.2 MacMahon Leaves Command

On the 6 AM turn of the game, MacMahon is removed from the map and placed back in the box. The French no longer have a Commander on the map capable of ordering an officer to activate and may only activate through force/officer initiative only.

3.1.4 Victory Conditions

If at the end of the game, the French occupy Bazeilles (hexes 1228, 1328 and 1329) and Balan (hexes 1525 and 1625), they win a minor tactical victory. If the French occupy the above-mentioned towns including La Moncelle at the end of the game, they win a major tactical victory. Any other result is a Prussian victory.

3.2 Historical Day of Battle

This scenario depicts the situation at Sedan on the 1st of September 1870. The French army is already encircled, and Napoleon III has given up command of the army to MacMahon. The situation itself is fairly hopeless for the French, but there are opportunities to do better than your historical counterpart. This scenario serves as either a good introduction to the series or a good solitaire study of the battle itself. If you are introducing the game to a new player, it's recommended the more experienced player take the Prussian side as they have the most to do.

3.2.1 French Setup
  • I Corps: w/i 2 hexes of 2229 and 2130 (Givonne)
  • XII Corps & MacMahon: w/i 1 hex of 1829, 1729, 1628, 1529, 1428, 1328, 1228 (from Daigny south toward Bazeilles)
  • VII Corps: w/i 1 hex of 2221, 2322, 2323, 2423, 2424, 2525, 2526 (from Floing northeast toward Illy)
  • V Corps & Napoleon III: In or adjacent to all Sedan hexes.
  • All other units may deploy onto the map with the friendly corps of their choice.
3.2.2 Prussian Setup

Prussian III Army:

  • V Corps: w/i 1 hex of 2621, 2722, 2822 (St. Menges northeast to Fleigneux)
  • XI Corps: w/i 2 hexes of 2007
  • IB Corps: w/i 2 hexes of 0430
  • IIB Corps & Fr. Wilhelm: w/i 2 hexes of 1322
  • W Corps: w/i 1 hex of 1811 (Virgne-Meuse)

Prussian IV Army:

  • Guard Corps: w/i 1 hex of 2135 and 2234 (Villers Cernay)
  • Saxon Corps & Fr. Karl: w/i 1 hex of 1534 (Rubecourt)
  • IV Corps: w/i 2 hexes of 1136 (Douzy)
3.2.3 Special Scenario Rules

These rules must be enforced in order to properly simulate the conditions at the start of the battle.

3.2.3.1 The French V Corps

At the start of the Day of Battle scenario, the French V corps deployed into hexes inside and adjacent to Sedan may not move until attacked in combat or if they suffer an adverse result from artillery bombardment. Forces attacked by Bombardment may then operate normally by themselves. If any forces of the V corps are attacked in regular combat, they may all operate normally the following turn or phase in which they are active (whichever comes first). (The French V corps had been very roughly handled at Beaumont and were in poor shape.)

3.2.3.2 MacMahon Wounded

At the start of the French 6 AM turn on September 1st, MacMahon is wounded in combat and is removed from the game. The French player rolls 1d6 to determine who takes command: on a 1-2 Ducrot takes command, on any other result (3-6), Wimpffen takes command. The resulting leader's AHQ counter is exchanged for their corps leader counter and also the resulting replacement corps leader is placed in the same hex. (Historically, Ducrot initially was given command and immediately ordered a retreat. Command was instead quickly given to Wimpffen, who had been given a commission by the French to take MacMahon's place had he been injured.)

3.2.3.2.1 Ducrot Takes Command

If Ducrot takes command, the French Victory Conditions for this scenario change so that in order to win, the French must either be able to trace an unlimited LOC (starting from any Sedan hex) or move at least 2 corps off-map via a road exiting the west edge of the map. Remember that an EZOC does not interdict a LOC, only the physical presence of an enemy combat unit can do so.

3.2.3.2.2 Wimpffen Takes Command

If Wimpffen takes command, there are no extra effects other than placing his Army Commander counter and his Corps Replacement Officer counter on the map.

3.2.3.3 March Orders

The Prussian player may issue 2 March Orders per turn. The French player may only issue 1 March Order per turn, and it may only be issued by Napoleon III or MacMahon, or MacMahon's replacement.

3.2.3.4 Napoleon III

Once during an attack and once while defending, any force stacked with Napoleon III receives a beneficial shift in combat. This bonus only occurs on the first attack and defense (so potentially 2 combats) in which Napoleon III participates. However, if Napoleon III's force is eliminated, forced to retreat or subject to an EX result, roll 1d6. On a 1-4 and nothing happens, and Napoleon III is displaced to the closest friendly force. Otherwise Napoleon III is considered killed/captured and the game ends in a Major Victory for Prussia. (While he was suffering from gout and fairly unimposing at this point, Napoleon III still carried the Napoleonic tradition and inspired his army to perform admirably under the conditions at Sedan.)

3.2.4 Victory Conditions

Victory can be determined either during a turn if certain conditions are met, or at the end of the game. If Ducrot has not taken command (see 3.2.3.2.1), the French may only win the battle if at the end of the September 1st 20:00 turn, none of their forces are demoralized and they have a lesser total of eliminated SP than the Prussian player. The only type of victory the French can achieve in this case is a minor tactical victory which essentially means that they have won the battle but will still lose the war, likely with Napoleon III surrendering that night or the day after to save his troops more bloodshed.

On the other hand, if Ducrot has taken command, the French can achieve a major strategic victory by exiting 2 non-demoralized corps and Napoleon III off the west edge of the map (this includes their respective depots). They can achieve a minor strategic victory by maintaining a LOC from Sedan to any road off the west edge of the map (getting all the brandy safely to the west). Any other result other than those mentioned above is a Prussian major strategic victory given they have encircled Napoleon III, who has no choice at that point but to surrender.

3.3 What-If Approach to Battle Setup

This scenario takes on the possibility that the French could have begun to retreat towards the west on August 31st, 1870. It was assumed by many French on the ground that they would only be in Sedan temporarily to begin with and didn't allow the soldiers to dig in and set up entrenchments. All that being well and good, the French had just made it to Sedan after a grueling pursuit following the loss at the battle of Beaumont, arguably the last chance the army of Chalons had to reach Bazaine back in Metz. It was much easier said than done to get the French infantry in any sort of marching order. They had arrived in Sedan heavily disorganized and demoralized. Accounts exist of French soldiers banging on doors begging for rations while officers dined in restaurants, though the French restlessness was gradually reduced thanks to a healthy supply of Brandy within Sedan.

In addition, the Prussian army on the way to Sedan ran into numerous traffic issues. Many of their officers, while talented, could be a little over-anxious and big-headed, which often led to one army blocking the other's main line of communication for hours at a time. This most significantly happened at Wissembourg at the start of the campaign where a large group of Prussian forces sauntered into the town without much knowledge or regard for one-another and led to relatively high Prussian casualties, especially given the meagre detachment of French forces left to defend that position. Additionally, adding to the command-confusion, the commander of all German forces (von Moltke the Elder) had split up his forces on the fly upon realizing the French army was sitting still with the intention of encircling and attacking the French, cutting them off from any potential retreat west. The What-If Approach to Battle scenario can produce a number of different outcomes and is more balanced than the historical scenario. Accordingly, it is better for opposed, competitive games.

3.3.1 French and German Setup

This scenario starts on the 04:00AM turn of August 31st, 1870. Set the French up as stated in 3.2.1 with the following exceptions: Napoleon III is kept in the box and place "Asleep" markers on every French Leader except Ducrot. The German forces are set up off map next to the following hexes:

III Army

  • V & XI Corps: Hex 0114
  • IB Corps: Hex 0134
  • IIB Corps & Fr. Wilhelm: Hex 0122
  • W Corps: With any other corps.

Army of the Meuse

  • Guard Corps: Hex 2044
  • S Corps & Fr. Karl: Hex 1444
  • IV Corps: Hex 0137
3.3.2 Scenario Special Rules

The following special rules are enforced in order to properly simulate the game situation.

3.3.2.1 Prussian Traffic Jams

Whenever entering the map, the Prussian player must roll 1d6 for each division (unit type color) entering the map. On a result of 1-4, that division may enter the map normally (including march orders and/or road march). On a result of 5-6, that division must roll again to enter the map on the following turn. Remember that movement points spent moving onto the board are cumulative, meaning units which are unable to enter the map must wait until the following turn to enter the map (one reason to use Road March when entering units onto the map.)

3.3.2.2 French Command Chaos

These rules attempt to simulate the lack of a strategic objective on the 31st. At the start of the game, all French leaders (with the exception of Ducrot) have Asleep markers placed on them. While on top of a leader, Asleep markers prevent the leader and all of their subordinate forces from taking any actions during their turn. At the beginning of the French movement phase, the French player rolls 1d6 for each leader with an Asleep marker, subtracting 1 for each unsuccessful attempt. Rolling a 1 (or modified 1) succeeds in awakening the leader and his subordinate forces, who then may act normally that turn. A French force (that is an individual stack or unit) may automatically activate once an enemy force moves within LOS of that force or is attacked/bombarded.

3.3.2.2.1 French Attrition

When a leader (or unit) is awakened, all forces under the command of that leader are Disorganized for that turn.

3.3.2.3 March Orders

The Prussian player may issue 2 March Orders per turn. The French player may only issue 1 March Order per turn which must come from MacMahon, or his replacement.

3.3.2.4 French V Corps

At the start of the game, the French player rolls 1d6 and adds 6 to the result. Place the French V Corps Morale marker that many turns in advance on the Game Turn Track. Until the beginning of that turn, all units of the French V corps are Demoralized.

3.3.2.5 (Optional) MacMahon Wounded

At their mutual agreement, players may choose to use the rules stated at 3.2.3.2.

3.3.3 Victory Conditions

The victory conditions laid out in 3.2.4 apply in this scenario also.

3.4 Variant What-If (Optional)

As an option, the French player may ignore the Asleep markers and activate their units as normal at the start of the game.

3.5 Free Setup

As an option, players may choose to setup units however they like, with the French setting up first followed by Prussian forces. Players may choose the appropriate victory conditions and other special rules as they like in order to experiment with different possible scenarios.

4.0 Designer Notes

This was the first game I had ever designed years ago, and it's gone through many changes. As I'm sure you've noticed, it's heavily derivative of Kevin Zucker's The Library of Napoleonic Battles Series with changes to the sequencing of play, among other nuances. Kevin I'm sure would and will disapprove of some of the design choices I made, such as Disorganization as a separate status given it would be an extra layer of chrome for little real effect and given his experience, he has a point. With that said, I didn't want to produce an exact clone of his game, and I found Disorganization to be a useful way to add granularity to ranged artillery tactics which were definitely more pronounced in this period, especially in the case of Prussia. Nonetheless, when I first designed this game 3-4 years ago, Kevin very graciously answered likely annoying questions from me constantly, and still continues to do so to this day, so this series and especially this game in particular, is dedicated to Kevin Zucker of Operational Studies Group. The habits and standards I've developed in terms of design are no doubt a result of his mentorship.

The battle of Sedan, along with the rest of the Franco-Prussian war, was a unique event which would go on to be widely misunderstood by both the French and German participants. Like many other conflicts leading up to and through World War I, a severe disconnect persisted between the deadliness of the technology, and the willingness of armies to attack entrenched positions head-on in the open. One of the reasons it's speculated that McClellan was reluctant to engage the Confederate army at the outset of the American Civil War was because he was an observer with the British and French armies during the Crimean War, and appropriately was concerned about the growing power of defensive firepower (though, arguably, a little too concerned).

The German army heralded the victory and would try to essentially replicate the maneuver on a strategic scale with the Schlieffen plan in 1914, with the winding 1st Army acting as the heavy-handed right of the German army. Unfortunately for them, their slavish adherence to following through with the plan after running into problems in Belgium rather than adapting to the situation, is precisely why the 1st Army did what it did in 1870.

The Sedan campaign is a classic example of what loosely translates to 'Mission Command', an innovation of German tactics during this campaign. Mission Command stipulated that commanders need the ability to make decisions on the ground without having to seek approval from a higher command. Unfortunately for the average German infantryman throughout 1914, the German high command ironically ignored this vital aspect of Mission Command, dictating maneuvers around timetables which had been prepared for the better part of a decade.

The French took some wrong lessons as well, but ultimately drew the right conclusion. The French had disregarded their superior rifles and early machine guns in place of going back to the bayonet of Napoleonic yore. This obviously had catastrophic consequences for the infantrymen who took part in Plan XVII, but the French high command, energetically led by Joffre, allowed their plans to adapt and change to the situation, allowing them to mount a decisive counter-offensive during the Battle of the Marne and the subsequent race to the sea campaign.

Sedan would go on in French military history to be synonymous with disaster, as the French army was again out maneuvered in 1940 when German tanks burst out of the Ardennes and overwhelmed the French defenses at Sedan, leaving the way open to encircle the British and attack Paris. Rather than the portrayal of cowardice common in many modern stereotypical depictions of French military capacity, the French fought incredibly stubbornly and would go on to continue the war for another year in 1871, as they did in 1940-41 in North Africa after the capture of Paris. Ultimately, Sedan was misunderstood in that the armies believed that quick decisive campaigns were still possible during this age of increased defensive firepower, whereas the reality was that Sedan 1870 was unique and unlikely to be replicated on a mass scale.

5.0 Counter Infographic

The counter key below is taken from the infographic printed on the final page of the Exclusive Rules.

Leaders

  • Commander (e.g. Napoleon III, GHQ): Command Points shown in brackets [ ] (e.g. [1]); Movement Allowance is the bottom number (e.g. 3).
  • Officer (e.g. Ducrot, corps I): Initiative shown in parentheses ( ) (e.g. (2)); Movement Allowance is the bottom number (e.g. 6).
  • Officer-Commander (e.g. Bonnemains): Command Points shown in brackets [ ] (e.g. [1]), with a CR value shown on the counter (e.g. 2:CR); Movement Allowance is the bottom number (e.g. 10).

Combat Units

  • Corps Color: the colored bar across the top of the counter.
  • Unit Identifier: the name and the unit's number designation (e.g. Wolff, 1/1).
  • Unit Size: marked by a symbol at the left of the unit type (e.g. XX for a division, X for a brigade).
  • Unit Type: the symbol in the center of the counter.
  • Strength Points: the bottom-left number (e.g. 6).
  • Initiative: the number in the center-bottom box (e.g. 2).
  • Movement Allowance: the bottom-right number (e.g. 4).
  • Division Color: the colored box shown on the counter's upper section (e.g. Lecoeuvre, 6+7 / 9 Arty, division color marked by a dot).
  • A yellow circle with a number inside (e.g. the yellow circle with 2) indicates how many sub-units are available in a Divisional unit, which can be broken down into its Infantry Regiments (the two counters below depict that division broken down into its two Infantry Regiments, e.g. Moreno and Houlbee).

Depot Units

  • Depot units are marked "DEPOT" with the name of their corps or formation (e.g. I Corps, Garde) and a half-filled circle symbol.
  • 3.1 Historical Action at La Moncelle (Introductory Scenario)
    • 3.1.1 French Setup
    • 3.1.2 Prussian Setup
    • 3.1.3 Special Scenario Rules
      • 3.1.3.1 Playing Area Restrictions
      • 3.1.3.2 MacMahon Leaves Command
    • 3.1.4 Victory Conditions
  • 3.2 Historical Day of Battle
    • 3.2.1 French Setup
    • 3.2.2 Prussian Setup
    • 3.2.3 Special Scenario Rules
      • 3.2.3.1 The French V Corps
      • 3.2.3.2 MacMahon Wounded
      • 3.2.3.2.1 Ducrot Takes Command
      • 3.2.3.2.2 Wimpffen Takes Command
      • 3.2.3.3 March Orders
      • 3.2.3.4 Napoleon III
    • 3.2.4 Victory Conditions
  • 3.3 What-If Approach to Battle Setup
    • 3.3.1 French and German Setup
    • 3.3.2 Scenario Special Rules
      • 3.3.2.1 Prussian Traffic Jams
      • 3.3.2.2 French Command Chaos
      • 3.3.2.2.1 French Attrition
      • 3.3.2.3 March Orders
      • 3.3.2.4 French V Corps
      • 3.3.2.5 (Optional) MacMahon Wounded
      • 3.3.3 Victory Conditions
  • 3.4 Variant What-If (Optional)
  • 3.5 Free Setup
  • 4.0 Designer Notes
  • 5.0 Counter Infographic
  • OOC Maneuver Phase: Only the currently activated force may move, reducing MP if required.
  • OOC Bombardment Phase: Only the currently activated force may bombard eligible targets.
  • OOC Combat Phase: Only the currently activated force must attack each enemy unit in a friendly ZOC.
  • Repeat Steps 5-8 until all desired forces have activated.
  • Rally Phase: Friendly Disrupted units recover from Disruption.