Full Thrust Fleet Book: Volume 1 (Warships of the Major Powers – 2183) thumbnail

Full Thrust Fleet Book: Volume 1 (Warships of the Major Powers – 2183)

Full Thrust Fleet Book: Volume 1 (Warships of the Major Powers – 2183) Rulebook

Table of Contents

Table of Contents

Designer's Notes

The "Official" Ship Designs

The bulk of this book consists of designs for the ships depicted in the four major human fleets of the Full Thrust miniatures range, which represent the space navies of the four main human "superpowers" of the late 22nd Century in the GZG future history. Each entry is a representative example of one particular class of ship for a given fleet, and in most cases is not the only class of vessel that fills that slot in the fleet inventory. For example, the New Anglian Royal Navy has several different classes of Destroyers in service aside from the Ticonderoga class shown - some are much older designs, while others are new construction that will supplement and eventually replace the current classes. In addition to there being many other classes of ships in service, the specific classes shown will all have minor variations of weapons or system fits on individual ships within the class. Players should therefore feel free to modify the listed designs and/or to create their own new ones while still remaining within the guidelines of the background provided.

It should be noted that the designs presented in this volume have been configured to fulfil sensible roles within their fleet structures, and as such are not "rules-lawyered" or maximised to exploit the limits of the designs system. If you set out to build a perfect fleet to beat a given type of opponent in a one-off game, you can probably come up with designs that are a lot more effective than those listed here, but that is not the way "real" navies work - they have to have the flexibility to perform many varied missions against different potential enemies, and this is what we have tried to reflect in the designs of the ships in this book.

For those of you who do not use the "official" background setting, the designs in this book should still provide an invaluable resource of pregenerated ships. Need a Heavy Cruiser? Just pick any of the ones listed, modify it (or not) as you desire, and call it whatever fits your preferred background!

Notes on the New Ship Design System, and Comparison with FT 2nd Edition

Using the design system given here, ships will end up with much higher MASS ratings than the comparable classes in FT2, but with broadly similar offensive and defensive capabilities. Under the new system of variable hull strengths, the Damage Point values of some ships will be a little higher than under FT2 (especially when using Average strength hulls or better), but this will be balanced by the slight increase in offensive power of most weapons due to the reroll rules and the increased vulnerability of some ships caused by the new style damage tracks. Overall, we think most of these factors will balance out and the game play should not be too unlike FT2.

So, why bother with the new design system at all? Well, its main advantage is that it offers increased flexibility. While an AVERAGE ship (average hull strength, medium thrust levels and a balanced weapons fit) should be broadly similar to its FT2 counterpart, the new system removes a lot of the artificial limitations of FT2 design and gives players the opportunity to experiment with decidedly strange design concepts if they so desire. It is now possible to try out ships with hugely powerful drives and little else, designs with massive armour and hull strength but very weak engines, all-offence ships that can dish out huge amounts of damage but have to rely on other ships to protect them, and so on.

Another very important point is that the new system removes the artificial "break points" that plagued the original design system - there is now no arbitrary division of ships into Escort, Cruiser and Capital sizes, and the construction system works on sliding scales from the smallest to the largest ship. Players used to the FT2 design system will notice that they now have to expend mass and points for such things as Fire Control systems that used to be "free" under the old rules, but no longer will there be the odd problems caused by the old mechanisms, whereby the larger ships of one category were much more effective (and cheaper) than the smaller classes of the next group up.

For every gain, there will have to be sacrifices made - every design will be a juggling act between offence, defence and mobility, and there will never be room for the best of everything. Some may be better than others in certain roles, but the ship that is perfect in one type of battle against one particular opponent may find itself in deep trouble against another fleet with a different design strategy.

Using FT 2nd Edition Designed Ships with the New Rules

If players wish to make use of existing ships while using the new rules given here, a rough comparison of force strength can be made using the points values of both old and new designs. While the old and new systems differ greatly in the cost of individual ship components and weapons, the overall points costs of ships are similar enough that an approximate balance between fleets can be made on a one-to-one basis.

It should be noted that forces using both FT2 and new design ships should NOT be balanced on MASS ratings alone, as equivalent ship classes have a much higher overall MASS under the new system - normally between two and three times higher.

The most important difference between FT2 and the new designs for actual gameplay (as opposed to design) purposes is the fire arcs; for this you can choose to either play the FT2 ships with their original 4-arc system, or make simple conversions to the new 6-arc rules; in the latter case we suggest that systems with one-arc facing in FT2 be given either one or two new arcs as seems most appropriate to the individual ship design, 2-arc FT2 weapons have 3 new arcs (180 degrees in both cases), and 3-arc FT2 weapons become 5-arc (i.e.: all but Aft).

Note that mixing the two systems like this will NOT be guaranteed to give an exactly balanced game, but then nothing will short of 100% identical forces. We don't claim that there will be no contradictions or rules clashes if you try to mix designs between the old and new versions of the game, but we're sure that most of you are sensible enough to sort out any that occur in the true spirit of the game.

Weapon Types and Backgrounds

In MORE THRUST we gave rules for a number of different "alternative" weapons and systems, including cloaking fields, the Wave Gun and even some downright silly ones such as the Reflex Field. The intention behind many of these was to simulate certain special weapons seen in certain TV series or films, to enable battles from those settings to be fought under the FT rules. What has happened, however, is that many players have used ALL the optional systems and weapons in their games. Now, there is nothing inherently wrong with this EXCEPT that, as some of the weapons were never meant to fit in with the basic game system, they can do very weird things to the game balance.

The following systems and weapons in particular are ones that were never intended to fit into the "standard" FT background: Wave Guns, Nova Cannons*, Reflex Fields, Cloaking Systems. (* OK, so this was in the basic rules and not in More Thrust, but it was still intended to be a token "ludicrous mega-weapon" ......)

We would strongly recommend that these systems are used with discretion, and then only with the express agreement of all players; they are not recommended for games where there is any kind of "competitive" element in play or in fleet design.

Please note that we're NOT telling you not to use any or all of these systems if you wish - just to be aware that their indiscriminate use may throw up anomalies in the game, and you should be prepared to deal with this as you see fit. It should also be noted that the use of Kra'Vak technologies (their railguns, scatterguns, armour and advanced drives, as per the More Thrust rules) on human or other ship designs will also have a potentially unbalancing effect on the game, and should be used with discretion if at all. Volume 2 of the Fleet Book series will address the alien weapons and systems in detail, and provide some modified rules to fix the inconsistencies in the More Thrust rules for them.

Vector Movement System

This is a completely OPTIONAL alternative movement system, which players may use instead of the standard FT movement rules described in the basic rulebook. To differentiate the two systems, the new system presented here is referred to as VECTOR MOVEMENT, while the standard FT movement rules are termed CINEMATIC MOVEMENT (because they allow ships to move as they are most often depicted in the SF media, with much less regard for the laws of physics!)

The Vector movement rules give a much more accurate portrayal of how objects really manoeuvre in space; they are also a little more complicated than standard FT movement, though far less so than certain other rules' attempts at the same thing! Whether you choose to use them or not will depend entirely on personal taste and whether they fit the particular background you are using - if you are recreating a film or TV series where the ships clearly do NOT move in a true vector fashion, then you will obviously not want to use these rules.

We have not depicted the Thruster systems as separate icons on the ship diagrams, in order that any design may be used with either movement system without alteration. For the purposes of damage, assume that the thrusters are driven by the same power systems as the main drives - when the main drive takes damage, thruster power is halved or lost accordingly.

Using the vector movement rules will become very straightforward once you are used to it, but we suggest taking a short while to read through the rules and examples carefully, and to plot a few movement examples out with a ship model to get the feel of the system before starting your first game. Radical course changes become much more difficult to do under the vector rules, especially at high velocities - remember that the faster you are moving, the less manoeuvrable your ship will be under the vector system. It may also take you a while to get used to the fact that the ship is not always pointing in the direction it is moving!

If you are using the "official" GZG background, or one of your own devising, then you may feel free to use either system at the agreement of your players, or even to mix the two to reflect older and newer ships in the timeline or differing levels of technology. Because the Thrust Ratings of ships are used in similar ways in both systems, any given ship design may be used with either movement system without modification - the only thing to be aware of is that ships with low thrust ratings may prove VERY unmanoeuvrable under the vector system.

It is perfectly possible to mix both vector and cinematic movement in the same game, to represent ships with different drive systems or technology levels - each ship simply follows the relevant rules according to its own drive system.

Course and Facing

Under the standard Cinematic FT movement, a ship will always be facing in the same direction that it is moving; under the VECTOR system the ship may be moving one way and facing another. The direction in which the ship is actually MOVING is termed its COURSE, while the direction in which the ship model is actually pointing is called its FACING. The current COURSE is indicated by a small arrow marker placed next to the ship's stand, and this marker is also used as a reference point during the process of moving the model. It should be noted that the FACING of a model should always be one of the 12 "clockface" points, though the mechanics of the vector movement mean that the COURSE will usually NOT correspond exactly to a clockface direction.

Main Drive Thrust

The THRUST RATING of any ship is the amount of thrust that can be produced by its MAIN DRIVE - the "big engine" at the back. Each point of thrust applied in a turn will accelerate the ship by 1 inch (or other movement unit) ALONG THE AXIS OF THE SHIP, so if a ship that is facing in its direction of travel (i.e. its "course" and "facing" are the same) and currently moving 6" per turn applies 4 points of thrust from its main drive, it will end up moving at 10" per turn. If the ship's facing and course are NOT the same (i.e.: the model is pointing one way and moving another) then the application of thrust from the main drive will alter the ship's course AND velocity. To DECELERATE using the main drive (as opposed to using the forward "retro" thrusters), the ship must be turned so that it is pointing "backwards" relative to its current course. When writing orders for your ship, Main Drive thrust is written as MD followed by the number of thrust points being applied - so MD4 will move the ship 4" in the direction of its present facing.

If using existing ship designs (whether from this book, from FT2 or elsewhere) then the thrust level shown in the ship's drive icon is the rating used for the main drive.

Manoeuvring Thrusters

In addition to the main drive, all ships have THRUSTERS - small drives positioned in clusters around the ship, pointing forward, port, starboard etc. (in reality ships would also of course have "up" and "down" orientated thrusters, but as we are not concerned with 3D movement in FT we can ignore these except for their use in rolling the ship). The thrusters may be used to "push" the ship to alter its course, or to rotate the ship onto a new facing. The power available to the ship's thrusters is equal to half the thrust rating of the main drive - so a ship with a main drive TR of 6 would have 3 manoeuvre points available from its thrusters; unlike the Cinematic movement rules, thruster use is allowed in addition to applying full available thrust with the main drive - so that a ship with a Thrust Rating of 4 could apply 2 points of thruster use and still use all 4 thrust points from its main drive.

Rotation

Rotation of a ship around its axis requires much less power than actually changing its vector. When the thrusters are used to rotate a ship onto a new heading, ONE manoeuvre point from the thrusters allows the ship to be rotated by any desired number of facing points. Thus, for the expenditure of one point of thruster power a ship can be rotated to face in any of the 12 possible facing directions, regardless of the thrust rating of its drives (the only difference between rotating 30 degrees and rotating 180 degrees is simply that, once the thrusters have started the ship spinning, the ship is allowed to rotate for longer before the thrusters burn again to cancel the spin). Note that a ROTATION changes the ship's FACING only, and never its COURSE.

Note: when thrusters are used to rotate the ship onto a new facing, it is assumed that several of the ship's thrusters are fired in unison to achieve the desired effect - for example, to rotate the ship to starboard it would fire the PORT FORWARD thrusters and the STARBOARD REAR ones simultaneously to spin the ship around its centre of mass. It is assumed that, in the same turn, a compensating burst is applied as the desired new facing is reached in order to stop the ship's rotation - the combined effect of these operations constitutes one "rotation" action.

ROTATION orders should be written down as TP (Turn Port) or TS (Turn Starboard), followed by the number of points of heading change - thus TP2 indicates a rotation to port of 2 clockface points (ie: 60 degrees).

Thruster Pushes

A thruster "push" is firing a combination of manoeuvre thrusters to alter the course and/or velocity of the ship, WITHOUT affecting its actual facing (i.e.: the ship ends the turn with its model pointing the same way it started, although its course may have changed). Pushes may be made to PORT, STARBOARD or REVERSE (using the forward "retro" thrusters to slow the ship down without having to spin it round and use the main drive). It requires ONE manoeuvre point of thrust applied to displace the ship by one movement unit; a push of 3 with the port-side thrusters will shift the ship 3" to starboard (for simplicity of play, this is referred to as a STARBOARD PUSH - to avoid confusing of orders we always use the direction of the EFFECT rather than the location of the thrusters being used). Note that a PUSH changes the ship's COURSE (and/or VELOCITY) only, and never its FACING.

PUSH orders should be written as PP (Push to Port), PS (Push to Starboard) or PR (Push in Reverse), again followed by the number of thrust points applied - so PR3 would be using 3 manoeuvre points from the retros to push the ship 3 units "backwards" relative to its current heading. Pushes may only be applied directly to port, starboard or rearward relative to the ship's facing at that moment.

Combining Manoeuvres

If desired, a ship may combine both ROTATION and PUSH uses of its manoeuvring thrusters in a single game turn, but no more than ONE of each, provided the TOTAL of manoeuvre points expended does not exceed the total available. It is quite acceptable for a ship with (say) 3 manoeuvre points of thruster power available to make a rotation (using up 1 thruster point), then apply a main drive burn, then use the remaining 2 manoeuvre points for a 2" thruster push to port, starboard or aft as desired. The final position, course and velocity would be measured after ALL manoeuvres are completed.

Order Sequence

The actual sequence in which thruster and main drive burns are applied in a single turn will make a difference to the final course and velocity of the ship, so it is necessary to rule on what order things are done in. Each effect is applied to the ship strictly IN THE ORDER THEY ARE WRITTEN DOWN BY THE PLAYER. If the player writes TP2, MD6 then the ship will first be moved according to its starting vector (as always), then turned 2 points to port (TP2) and then moved 6" along its new facing (MD6). If, on the other hand, the order is written MD6, TP2 (thus applying the main drive burn BEFORE rotating the ship to its new facing) then the result will be VERY different in terms of the ship's final vector and position - plot each one out and you'll see what we mean!

Collisions

If there are any objects on the board that are deemed big enough to pose a collision risk, such as asteroids or very large space installations, such a risk will only occur if the line between the ship's STARTING and FINAL positions intersects with the object. In effect, it is this line (as shown by the tape or rule when measuring the final velocity of the ship) that most nearly approximates the "true" path followed by the ship during the turn - the position of the ship model at any other time during the movement sequence is merely for calculation purposes and does NOT indicate that the ship actually occupies that point at any time. Of course, even doing it this way is an oversimplification of the true mechanics - but we feel it is close enough for game purposes!

Moving Ships Under the Vector System

Once the orders are written by all players, all ships are moved simultaneously in accordance with their starting vectors and any relevant manoeuvre orders. When moving a particular ship, ALWAYS start by moving it according to its starting vector i.e. move the model in the direction of its present COURSE (as indicated by its course marker arrow) a distance equal to its current VELOCITY, being very careful to keep the FACING of the model exactly the same as at the start of the turn; at this stage, LEAVE THE COURSE MARKER IN ITS STARTING POSITION. Now apply any thrust (main drive and/or thrusters) indicated in the ship's orders, making sure to apply each effect in the sequence it is written down. Where the model ends up after all thrust has been applied is its finishing position for that turn; now place the tape measure or rule between the course marker and the ship's final position, and read off the distance - this (rounded to the nearest whole inch or other movement unit) is the ship's final VELOCITY for the turn, and should be written in the "V" box on the order sheet ready for the next turn. Finally, move the course marker up to the stand of the model again, with its arrow pointing in the direction of the ship's new COURSE - i.e.: parallel to the tape-measure. The ship's VECTOR at the start of the next turn will now be in the direction of the course marker arrow, at the new velocity written down.

Vector Movement Examples

i) The ship in Diagram 1 is facing in the same direction it is moving (ie: its COURSE and FACING are currently the same), and its current velocity is 10. The ship starts the turn at position A. The player writes movement orders of TP3, MD6. Firstly, the ship is moved along its present course by 10", to position B - it is then rotated 3 points (90 degrees) to PORT, to position C. Now, it is moved along its new facing by the amount of its Main Drive burn, ie: 6", to its final position D. Finally, the distance between starting and finishing positions (A and D) is measured - rounded to the nearest whole number it will be 12", and this is recorded as the starting velocity for the next turn and the course marker is moved up to the model again parallel to the line between positions A and D.

[Diagram 1 and Diagram 2 (positions A to D, showing the rotation and the 6" main drive burn) are omitted from this transcription.]

ii) The ship in Diagram 2 is facing in the same direction it is moving, and its current velocity is 6. The ship starts the turn at position A. The player writes movement orders of PS2. Firstly, the ship is moved along its present course by 6", to position B. Now, the ship's side thrusters fire to push it 2" to starboard, to the final position C, without changing its facing. The distance between starting and finishing positions is measured - rounded to the nearest whole number it will be 6", and this is recorded as the starting velocity for the next turn - and the course marker is moved up to the model again parallel to the line between positions A and C.

New Fire Arc Rules

Arcs of Fire

The four 90-degree fire arcs originally used in FT are now replaced with SIX arcs, each of 60 degrees. The new arcs are indicated in Diagram 3, and are designated (clockwise, from dead ahead) FORE (F), FORE STARBOARD (FS), AFT STARBOARD (AS), AFT (A), AFT PORT (AP) and FORE PORT (FP). This brings the fire arcs into line with the 12 "course points" used in movement, and also makes fire arcs much easier to judge by eye from the hexagonal or clockface-style bases that most players mount their ships on.

All weapons that are capable of bearing through more than one arc may have this indicated either by the "pointers" used in FT2, or by putting a ring of six segments round the system icon, and blacking-in the segments through which fire is NOT permitted. Examples of both these methods are also shown in Diagram 3. The old "pointers" method may be easier to hand-draw for your own ship designs, though the segment method is more visually attractive and has been used for the designs in this book.

Weapons or systems that can only bear through ONE arc have this indicated by the orientation of the system icon on the ship diagram - ensure it is pointing clearly towards the relevant arc.

Systems that have no "directionality" to their icon (eg: PDS) have all-round (6-arc) fire capabilities.

[Diagram 3 (the six fire arcs, and examples of Beam Batteries bearing through the three forward arcs FP, F and FS) is omitted from this transcription.]

Optional Rule: Aft-Arc Fire

The FT (2nd ed.) rules prohibit any weapons fire (except point-defences) through the aft arc of a ship, and no weapons are mounted to bear through that arc in the FT2 ship designs. You will note that some of the designs presented under the new system in this volume DO have weapons bearing directly aft (those weapons mounted in all-round (6 arc) turrets). As an OPTIONAL RULE, players may decide to PERMIT aft-arc fire (by weapons that are mounted to bear accordingly) on any game turn in which the firing ship did NOT use any thrust from its main drive engines. Course changes (if using Cinematic Movement) or Thruster use (if using Vector Movement) are permitted without affecting fire through any arc, but any acceleration or deceleration applied by the main drives blocks any outgoing fire through the aft arc in that turn only.

Rolling Ships

Although FT makes no attempt to simulate 3-dimensional movement or combat (as explained in the FT rulebook, we feel that the additional complication far outweighs the benefits gained), there is one simple rule addition that we are including here: the ability to "roll" a ship 180 degrees on its central axis, thus effectively swapping the port and starboard sides (the ship is "upside down" relative to the other ships on the table). This manoeuvre can be very useful when ships start to lose systems due to damage, as it can allow undamaged weaponry to bear on targets that would otherwise be on the wrong side of the ship.

To perform a roll, the player simply notes RO in his movement orders for that turn; the roll expends 1 thrust factor, which comes off the "turning" allowance - i.e.: a thrust-4 ship, normally capable of 2 points of turn, could only turn 1 point if it also rolled that move (but it would still be able to use its other two thrust factors to accelerate or decelerate as normal). The roll then occurs at the start of the ship's movement, and a "rolled" marker is placed by the model to indicate its inverted condition. Rolling has no effect on combat EXCEPT that the ship's port batteries now bear to starboard, and vice-versa. An inverted ship may, of course, roll back "upright" in any subsequent turn, or may remain inverted as long as the player wishes.

For simplicity of play, it is suggested that rolled ships should still have their movement orders written in relation to the actual miniature rather than their theoretical inverted condition - thus an order written for a Port turn will still turn the model to the left, even though to the inverted ship this would actually be a "starboard" turn. Keeping to this convention should, hopefully, avoid a lot of potential confusion and arguments!

Odd-Numbered Thrust Factors

It is permitted to design ships with odd-numbered Thrust factors (eg: Thrust-3); such drives operate just as for even-numbered ones except that to determine the thrust available for course changes the thrust rating is halved (as normal) but is rounded DOWN, so that a ship with Thrust-5 is only capable of 2 points of course change. Note, however, that ships which (through design or through drive damage) have a Thrust factor of 1 may always change course by 1 point per turn, but may not accelerate or decelerate at all while doing so.

Hull Damage Track

For all classes and sizes of ship, the total number of hull damage boxes (which is equal to the MASS used for Hull Integrity) is divided into 4 rows to make up the "damage track" on the ship diagram. Each row should be of equal length, but if the number of damage boxes does not exactly divide by four the extra boxes are placed in the upper rows - so a ship with just 2 damage boxes has one box in each of the two first rows and nothing in the last two, and a ship with 15 boxes has three rows of 4 boxes and one of 3.

Applying Damage

As the ship takes damage, these boxes are crossed off, one row at a time, from left to right. At the end any one attack, a target ship that has had the last box in a row crossed off during that attack must immediately take a Threshold Check (exactly as per original FT2 rules); the threshold number is 6 for the first row, 5 for the second and 4 for the third. When the last box in the fourth row is crossed off, the ship is effectively destroyed for game purposes. If a ship suffers enough damage in a single attack to push it over more than one threshold check, make only one check (for the last row destroyed) but add 1 to each die roll for each extra threshold point passed in that attack. [Note that "one attack" is defined as the ship being fired on by ONE other ship, regardless of how many or few weapons are fired at it; it also counts as "one attack" if the ship is under fire by any number of missile salvoes and/or fighter groups at the same time.]

Rerolls (Penetrating Damage)

This is an OPTIONAL rule, but one that we recommend is used - the new design system results in ships that are somewhat larger and may (depending on chosen hull strength) have more damage boxes than FT2 standard classes, and the extra damage potential of the Reroll option goes some way to redressing the balance.

Simply, when firing any weapon system that is capable of penetrating damage (as specified for each type of system), any roll of SIX inflicts the usual damage AND allows a "reroll" - roll an extra die, and apply any further damage that is indicated by the result. If this reroll is ALSO a six, then apply the damage and roll again. There is no limit to the number of rerolls you can make if you keep throwing sixes (but if you get more than three in a row maybe you should go out and buy a lottery ticket this week...!).

If the target ship has no screens or armour, any damage done by the reroll die is counted exactly as for normal damage by that weapon type - e.g.: if a beam battery shot scores a six, then apply two points of damage and reroll - on a reroll score of 1-3 there is no further damage, on a 4 or 5 apply 1 more point, and on a 6 apply two (and reroll again).

If the target ship has SCREENS active, then the effects of the screen are deducted from the initial attack dice as usual (if applicable), but NOT from the result of any reroll dice - the reroll is assumed to have already penetrated the screen, and any further damage done is applied directly to the ship itself.

Reroll damage is applied to ARMOURED ships in a similar manner - any damage from the basic die rolls of an attack is applied to armour boxes on the ship, but if a six is rolled then it knocks out two armour boxes and any damage caused by the REROLL die is applied directly to the ship's ordinary hull damage boxes, irrespective of whether it still has armour boxes remaining.

Core Systems (Optional Rule)

While weapons, fire control sensors and screen emitters are all "surface" features on most ships and are thus very vulnerable to incoming fire, there are certain vital systems that are usually buried deep within the ship's hull; these are the "core" systems, and consist of the Command Bridge (which also includes computer systems, avionics etc.), the Power Core and the Life Support System.

If using the "core systems" rules, these three systems are grouped together on the ship systems diagram, with a box drawn round them. Whenever the ship reaches a threshold point, the systems within the core box are each rolled for as normal, but at +1 to the current threshold number - thus at the first threshold point, where systems are lost on rolls of 6 only, the core systems do NOT need to be rolled for (as they would only be lost on a "7"). On the second threshold, where normal systems go down on rolls of 5 or 6, the core systems are only hit on rolls of 6, and so on.

Notes: i) The core systems, and their basic "protective" box, do NOT need to have MASS allocated to them during ship design - they are assumed to be part of the essential structure of all ships. ii) If using Needle Beams, the core systems may NOT be targeted by these weapons; Needles may only fire at surface features on the ship, such as weapons, sensor grids, drive units etc.

Effects of Threshold Damage on Core Systems

Command Bridge Hit

If the Command Bridge takes a hit, then a further D6 roll is made immediately - if the roll is 1 to 5, then the ship is "out of control" for that number of turns, until command can be restored through backup links and secondary command systems. If the roll is a 6, then the ship is PERMANENTLY out of control for the duration of the game. While a ship is "out of control", it will continue on its present course and velocity, and may not fire weapons, launch fighters or take any other offensive action. Passive defences (screens) are still operational, though active defences (PDS etc.) are not. Once control is regained (after the number of turns indicated by the die roll), all undamaged systems come back on line. Damage Control parties may be used at any turn to try and restore control earlier, using the normal damage control rules.

Power Core Hit

If the Power Core takes a hit, it is damaged and may "go critical" and explode, destroying the ship. It continues to supply power for the ship, but the safety systems that control it are damaged or destroyed, and each subsequent turn the player must roll a die at the start of the turn - on a 5 or 6, the core explodes. Damage Control parties may be used as normal to try and stabilise the power core - such attempts are made before the roll for explosion for that turn, and success will bring the core back under control and negate any further effects (unless the core is then damaged again, when the process will repeat). Each turn, BEFORE rolling the die, the player may make a choice - he may abandon ship, or he may "dump" the core - this avoids the risk of explosion, but leaves the ship without power for anything but emergency life-support (from backup batteries) - the ship is intact, but unable to do anything further in this battle except continue to drift on its present vector. If the player chooses to abandon ship, the ship continues to drift while still rolling each turn to see if the core explodes - in this case, however, the needed number for an explosion drops by 1 each turn, as the core is running out of control with no-one to damp it down; thus it WILL explode eventually and the ship will be lost. A ship that dumps its core will be no further use for that battle, but may be salvaged afterwards and its power restored.

Life Support Hit

If the Life Support Systems take a hit, then a further D6 roll is made immediately - the number rolled indicates that the life support will fail after that number of turns. Damage control parties may be allocated to try and repair the LSS as for any other system. If the LSS fails before being repaired, then the crew must immediately abandon ship or be lost. A ship without LSS become a drifting hulk, though it may of course be recovered and repaired after the game if it survives.

NOTE: The Core Systems rules given above are entirely optional; if you do not wish to use them, simply ignore the systems within the core box on the ship diagram for all game purposes.

Expanded Fighter Rules

Fighter Movement

In the original FT basic rules, fighter groups were moved AFTER all ship movement had been made. This meant that the player could position his fighters easily to attack a desired enemy ship, which was why we kept the standard fighter movement distance down to only 12" to stop them becoming TOO powerful. We now strongly suggest that the optional rule given in MORE THRUST is used as the standard rule, so that all fighter groups should be moved after the players have written their movement ORDERS for their ships, but BEFORE the ships are actually moved - if a fighter group then ends up within 6" of an enemy ship after that ship has been moved, it may attack. This forces players to try and predict at least roughly where the enemy is going to move, in order to position their fighters effectively - thus simulating the fact that although fighters are very fast and highly manoeuvrable (hence the abstract nature of their movement, without orders or course/velocity recording) they have limited fuel reserves for extended travel and must therefore try to predict "intercept" trajectories to get them close to their intended prey.

Fighter Endurance (also introduced as an optional rule in MT) is also now a recommended standard rule (provided it fits the background you are using), but the endurance limit is increased from 3 turns of combat to SIX turns per standard fighter group. A group will use up 1 Combat Endurance factor each turn it engages in combat, whether attacking a ship, another fighter group or being attacked itself, and 1 CEF every time it makes a Secondary Move (see below). Normal movement during the main fighter movement phase does NOT consume Combat Endurance factors. When all combat endurance is exhausted, the group may still move normally (though it may make no secondary moves) but may not make any attacks. There is now no time limit on a group returning to its carrier after exhausting its CE. A group that is engaged in a dogfight by an enemy group after exhausting it's CE factors may return fire, but only scores kills on rolls of 6.

Standard fighter groups now have a maximum move distance of 24". Fighter group movement is performed AFTER both players have written their ship movement orders, but BEFORE the ships are actually moved.

Fighter movement is performed BEFORE the placing of markers for SMB fire.

Once all ship movement has been made, players have the option of making a SECONDARY MOVE with any fighter groups they wish, of up to 12" ; as with the basic move, this can be in any direction and any distance up to the maximum 12", even if the group moved its full 24" in the primary move phase. Any fighter group that makes this secondary move loses 1 COMBAT ENDURANCE factor if players are using the endurance rules. The secondary move may be used to bring a group into contact with a target that would otherwise have evaded it, or in some cases to get them out of trouble - but it may NOT be taken if the group has already been engaged in a dogfight by another group.

[We recommend recording the remaining Combat Endurance and the number of fighters left in each group with two small D6, in different colours, which maybe placed either behind or on the stand of the fighter group they relate to; an alternative to this is to have a simple fighter group roster sheet on a piece of paper, with a box drawn for each group that contains two rows of six smaller boxes - one row represents the number of fighters left in the group, and the other the remaining CE factors.]

Example: One of player A's standard fighter groups is moved 20" in the main fighter movement phase, being placed in a position that A hopes will allow it to intercept one of B's ships. Following the fighter movement, player B fires an SMB salvo and places its counter in a position that will threaten one of A's ships after it has moved. Both A and B now move their ships in accordance with their orders. Player A sees that his fighter group is now out of position to attack its intended target (B having anticipated well and changed course), but if he takes a secondary move with the group then it could either follow its original target OR could move to intercept the SMB salvo that is attacking A's ship. A has a free choice as to which option he takes (if any), but if he chooses to move the fighter group then he must mark off 1 turn's worth of Combat Endurance for the group to represent the additional fuel it has consumed to make the intercept.

If dicing for initiative (which we recommend as the "default" method if players do not agree otherwise, particularly in competitive games) then players may add one to their roll for every ACE they have in action at that time, and subtract one for every TURKEY group (see MT for Ace and Turkey rules). The lower scorer must move a group first. Whoever moves first in the main fighter move phase should also move first in the secondary move phase. Whatever method is used to determine first move, we recommend that both players should move all their TURKEY groups before any normal ones, and all normal groups before any that include ACES.

Fighter "Screens"

Fighter groups may be assigned as close escorts for larger ships, specifically to ward off enemy fighter attacks on that ship; when used in this role, the fighter group is said to be acting as a "fighter screen" for the ship it is escorting. When assigned as a fighter screen, the fighter group must remain within 3" of the ship it is escorting at all times - if it is moved further away then it has broken off from its escorting duties and no longer functions in a screening role. A fighter screen (which may be a single group or several) always moves at the same time as the ship it is screening, rather than being moved in the normal fighter movement phase. Screening fighters CAN exceed the normal fighter movement allowance if the ship they are screening is moving faster than the fighters could normally move. Whenever a ship that is being escorted by a fighter screen comes under attack from enemy fighters, the attacking group(s) MUST engage the screening fighters using the DOGFIGHTING rules instead of attacking the ship in that turn. Each group of screening fighters must be engaged by at least one attacking fighter group; once this condition has been satisfied then any further uncommitted attacking groups may fire on the escorted ship. Example: an NAC transport ship is being escorted by a screen of 3 groups of fighters. Four groups of ESU fighters move to attack the transport - three of them must "pair off" against the three groups of screening fighters and engage them in dogfights, while the fourth is thus free to attack the ship directly. If the ESU player prefers, he could instead allocate all four groups against the screening fighters (two onto one, and one each onto the other two) in an attempt to destroy as many as possible, leaving the transport without fighter cover for the rest of the game.

Attacking fighter groups that are forced to engage screening fighters may NOT then attack the ship in the same turn, even if they defeat all the fighter screen; they will have to try to follow the ship and attack it in the following turn if they wish to (though if all the screening groups are engaged by other groups, then any "excess" attackers may of course attack the ship in that turn while the defenders are occupied). While they survive, screening fighters are thus very useful for keeping attacks away from lightly-protected shipping.

Multiple Group Dogfights

There will be cases, especially when fighters are screening larger ships, where multiple-group dogfight situations (known to fighter pilots as "furballs") may occur. In such combats, all groups engaged in the dogfight may fire only once per turn, but may choose to attack just one enemy group or to split their kills between two or more enemy groups. If the player chooses to split his fire, the dice are rolled as normal and the casualties divided as equally as possible between the relevant groups. The resolution of the attacks alternates between groups, with the player having initiative for that turn firing first - all losses are applied immediately, before the other player may return fire.

Interception of Missiles by Fighters

A fighter group may attempt to intercept and engage any missile salvo that is within 6" of it at the end of either the fighters' main or secondary movement. Simply move the group up to the missile counter, and roll one die for each fighter: one missile from the salvo is destroyed for each 5 or 6 scored by the fighters (scores of 6 allow rerolls). The missiles cannot actually fight back or target the fighters, but for each missile that is hit roll 1 die: on a roll of 6 (no reroll) then a fighter is lost by being caught in the blast of the destroyed missile (trying to take out missiles is a tricky and dangerous job at high speeds and very close quarters).

Fighter Speed and Endurance Options

FAST FIGHTERS may move up to 36" in their main movement, and up to 12" (as standard fighters) in the secondary movement. LONG RANGE FIGHTERS move as Standard types, but have their Combat Endurance increased to NINE rather than 6. [Note that these and some other rules refer to the specialised fighter variants detailed in the MORE THRUST supplement book.]

Fighter Move Sequence

Players alternate in moving one fighter group each until all have been moved (if desired); players should agree before the game whether they will dice for "initiative" each turn to see who moves a group first, whether they will take turns in moving first, or whether the player with the most groups in play will always move first.

Modified Weapons Systems

New Beam Battery Designations

For the new design system, we have reclassified the standard FT beam batteries with NUMERICAL designations, rather than the old "A", "B" and "C" classes. The "C" battery becomes a Class 1, the "B" a Class 2 and the "A" a Class 3; this new designation allows us to extend the system to Class 4, 5 and even larger, which effectively replace the "AA" batteries covered in More Thrust.

IMPORTANT NOTE: There is NO change to the way the beam batteries function in the game - all that has changed is the designation.

This change allows the range and dice of each battery to be directly related to the Class number, thus:

Battery class number indicates the number of dice rolled per shot, minus one die for every full 12" in range to target.

E.g. a Class 3 battery rolls 3 dice at less than 12", 2 at 12" - 24" and 1 only at 24" - 36". At ranges greater than 36" the weapon is out of range.

The most common weapon batteries are Class 1 (used as secondary/defensive armament in most cases, or as a limited offensive system on very small ships), Class 2 (primary systems for small/medium ships, and secondary weapons on large classes) and Class 3 (the most common primary weapon system for capital ships); Class 4 batteries are occasionally found on very large vessels, and a few forces have experimented with Class 5 and above (especially for fixed installations and stations) - however the huge size and power requirements for these large systems preclude their general use.

Basic MASS requirements of a given battery starts at 1 for a class 1, and DOUBLES for each class increase - so a class 2 takes 2 MASS, a class 3 takes 4 MASS, a class 4 takes 8 MASS and so on. At 16 MASS for a class 5 and 32 for a class 6, these larger systems rapidly become non-cost-effective for most purposes.

Class 1 batteries are automatically capable of all-round (6 arc) fire at their basic MASS cost of 1. Class 2 batteries at their base MASS of 2 are capable of 180 degree traverse, firing through any 3 adjacent arcs, but may be given full-traverse (6 arc) turrets for an additional 50% MASS cost (i.e.: 3 MASS rather than 2). Class 3 batteries and above have only 1 arc fire (60 degrees) at their base MASS cost; adding additional arcs of fire requires 25% of the base MASS of the battery per additional arc covered - so a Class 3 covering 3 arcs would require 4 + 1 +1 = 6 MASS, while a Class 4 with the same traverse would need 8 + 2 + 2 = 12 MASS.

The standard icon for a beam battery remain as before, i.e.: a circle with the battery class (now a number rather than a letter) inside it. Arcs through which the battery can bear are indicated either by the "pointers" used in FT2, or by a six-segmented circle around the icon.

Beam battery hits and damage remain exactly as per the original FT rules, but may be augmented by the REROLL rule if you are using this option.

Class-1 Beam Batteries as Point-Defence

Instead of firing in an offensive role, Class-1 beam systems may act as secondary point-defence systems against both fighters or missiles; in this role they fire as for a PDS, but rolls of 1-4 are misses, while 5 or 6 each kill ONE missile or fighter; a 6 allows a reroll as usual. If used in the PD role, a Class-1 battery may NOT fire offensively in the same turn. ONLY Class-1 beams are usable in this way - larger beam batteries are not capable of the fast response times necessary for the role. Class-1 beam batteries may NOT be used in an Area-defence role, even if an ADFC is available.

Enhanced Pulse Torpedoes

In the light of player feedback and experience over the years that FT has been in use, we have decided to enhance the capabilities of a couple of weapon systems from the original rulebook to make them a little more cost-effective in game terms. The Pulse Torpedo tube is one weapon to get this upgrade - its maximum range is increased to 30", and its range bands and associated to-hit scores are now as follows:

At 0-6" a hit is scored on 2+, at 6-12" on 3+ , at 12-18" on 4+, at 18-24" on 5+ and at 24-30" on 6 only. Screens do not affect damage.

Damage per hit is still 1D6, and NO reroll is applied to scores of 6. If the target is ARMOURED, then half the damage scored (rounded UP) is taken on the armour, and the remainder applied directly to the HULL boxes.

The basic mounting for a Pulse Torp tube still only fires through 1 arc (though this can be ANY one arc, chosen at the time of ship design), but the tube may be mounted to traverse through up to THREE arcs at the expenditure of a further MASS per extra arc.

All references to Pulse Torps in the ship designs in this book are of this "new" version, which replaces the original type.

Enhanced Needle Beams

The much-underused FT Needle Beam is the other weapon to get an upgrade here; its maximum range is increased from 9" to 12", and it now has the potential to do at least a small amount of hull damage whether or not it hits its intended target system. As in the original rules, the firer must nominate which system on the target ship he is firing at, and roll 1 die. On score of 6, the targeted system is knocked-out and 1 DP is applied to HULL (the weapon ignores both SCREENS and ARMOUR). On score of 5, the target system is unaffected but 1 DP is still inflicted on hull. Rolls of 1-4 are no effect.

The Needle Beam is still only a one-arc weapon, though it may be mounted to fire through any one arc at the time of design.

Defensive and Other Systems

Point Defence Systems

Under the revised rules, we have done away with separate systems for Point and Area defence weapons; we now have just one standard system, the PDS (POINT DEFENCE SYSTEM), which can if desired be linked to an AREA-DEFENCE FIRE CONTROL system to allow it to fire in the role of the old "ADAF" system.

Each Point Defence System (PDS) on a ship may fire once per turn, either as an anti-fighter or anti-missile defence weapon. In either case, roll 1 D6 per PDS: scores of 1-3 have no effect, 4 and 5 each kill ONE missile or fighter, while a 6 kills two and allows a reroll (same results apply to rerolled scores). All PDS batteries on a ship must have targets allocated to them BEFORE any of the effects are rolled for, and "wasted" shots may NOT be reallocated to other targets (e.g.: if two PDS are allocated against a single missile salvo, but the missile targeting roll only gives two missiles on target, if the 2 PDS then get hits on three missiles the third "kill" is wasted - it cannot be reallocated against a different salvo).

Area-Defence Fire Control (ADFC)

An ADFC is an enhanced anti-fighter/anti-missile Fire Control system that allows a ship to protect other nearby ships with fire from its own PDS. One ADFC allows the ship's PDS (any number of them) to fire at any combination of threats (Fighters, Salvo Missiles, etc) that are directly attacking one other ship that is within 6" of the ADFC-carrying ship. Any PDS used in this mode may not fire in other modes in the same turn. PDS used in AD mode roll dice and score kills exactly as normal PDS fire. An ADFC functions ONLY as an enhanced PDS fire-director link, and may NOT be used as a "normal" Fire Control.

Note that this system is a replacement for the original ADAF installation used in the FT2 rulebook, and apart from the rules above it functions in the same way and with the same limitations.

Hull Armour

Armour may be added to the ship in the form of additional damage boxes that absorb hits before the hull structure begins to take damage. Armour consumes 1 MASS per box of protection, so if you choose to allocate 10 MASS to armour you will get 10 armour boxes on your ship chart in addition to the normal hull damage boxes, and will be able to absorb a total of 10 damage points with the armour before taking any damage to the actual ship structure; once the armour is all gone you will be taking damage to the hull in the normal way. Note that some or all of the damage from certain weapons, and damage caused by REROLLS, is classed as "penetrating" damage - this bypasses armour boxes and affects hull boxes directly, even if there are intact armour boxes left.

Armour boxes are indicated on the ship diagram as a row of CIRCLES to differentiate them from the square boxes of the main damage track, and are placed above the top row of hull damage boxes. There is NO threshold roll made at the end of the row of armour boxes, but any further damage is applied to the first row of hull boxes.

Screens

Energy screens, which protect against beam weapons fire and some other kinds of damage, require 5% of the ship's MASS for a level-1 Screen system, and 10% for a level-2 Screen, but with MINIMUM requirements of 3 MASS for level-1 and 6 MASS for level-2 screens; thus any ship up to MASS 60 requires 3 MASS spare to install a level-1 screen system, while larger ships require 5% of their total MASS. Apart from any limitations described in the rules for specific weapon systems, screens work exactly as their counterparts in the original FT rules.

IMPORTANT NOTE: THERE ARE NO LEVEL-3 SCREENS UNDER THE NEW DESIGN SYSTEM - additional screen generators above two may be purchased and installed if desired (at 5% of ship MASS each), but will NOT be of use except as back-ups to bring online if one of the main screens is lost through damage.

Fire Control Systems

Fire Control Systems (FCS) operate under exactly the same rules as the original FT rules, the only difference being that you must now "buy" them during the ship design procedure; each FCS requires 1 MASS. There is no limit to the number of firecons that may be installed on a ship if the MASS is available.

Damage Control Parties

The number of Damage Control Parties a ship has is proportional to its crew size, which is in turn a function of ship mass. This assumes that a certain percentage of the crew is allocated to form damage control teams during combat situations. Military ships have one Crew Factor for every 20 MASS or part thereof, and one DCP per Crew Factor. Thus a MASS 1-20 ship has one CF and hence 1 DCP, a MASS 21-40 ship 2 CFs and 2 DCPs, a MASS 81-100 ship 5 CFs and 5 DCPs etc.

For Merchant and Civilian vessels, which usually have much smaller crews than warships, there will be one CF per 50 MASS (or part thereof) of ship size. How many crewmen a single CF represents is entirely up to the kind of background you are using, but in the "official" one we assume that one CF represents up to about 20 personnel.

A single DCP might therefore be four or five crewmen, and usually includes medical personnel to assist crew casualties as well as engineers to patch up equipment. For ships with multiple DCPs, more than one may be allocated to a single repair job at one time; one DCP on its own will manage to bring a system back on-line on a roll of 6, and each additional DCP on the same job reduces this needed number by 1. The maximum limit of DCPs on a single job is THREE, so that the highest chance of repairing a system is 50% (4+ on a D6) if three teams are allocated to it. Note that ALL teams put on one system in a single turn make just the ONE roll.

TUGS, which are designed to "tow" other ships through Jump by extending their Jumpfield around them, require much larger than normal FTL drives; they need a drive equal to 10% of their MASS just to provide their own Jump capability, plus additional drive MASS equal to 20% of the total MASS of ships they can tow. Thus to tow a ship of (say) MASS 100, the tug would need spare Jump drive capacity of MASS 20; if the tug itself was a MASS 60 ship, it would need its own MASS 6 FTL drive plus the additional 20 - so it would have to devote a total of 26 MASS to its Jump drive package.

Example: a MASS 90 ship, with 5 CF and thus 5 DCPs available, is trying to repair systems lost at a threshold check. The player decides to combine 3 DCPs (the maximum allowed on one job) to try and get a FireCon back on-line, and use the other two to attempt to fix a damaged weapon system. The FireCon will be fixed if the player can roll 4+, and the weapon on a 5+.

Turn Sequence

This is a summary of the full game turn sequence that should be followed if players are using all the options and new rules listed in this volume.

Crew Casualties

For simplicity, it is assumed that crew casualties run proportional to the amount of hull damage suffered by the ship; as damage is taken and crew casualties are suffered, CFs are lost and the available DCPs are reduced accordingly. To record this on the Ship Diagram, dots are placed in certain boxes on the Damage Track to denote the points at which Crew Factors are lost; a ship's current CF (and thus its current number of DCPs) is the number of dots still remaining in non-destroyed boxes on the damage track.

All the designs given in this book already have the CF dots marked in their damage tracks, but if you are designing a new ship type from scratch then you will need to distribute the CFs correctly through the damage track; to do this, divide the number of Hull Boxes the ship has by the number of Crew Factors. Round the result UP if it is not a whole number, then count along the damage track until you reach the number and place the first dot there. Count the same number again and place the second dot, and so on. When you reach the end of the damage track, put the last dot in the last box - it is assumed that the last of the crew will be killed when the ship is finally destroyed, if they haven't abandoned ship by then!

Example: The MASS 90 ship above, with 5 CFs, has an Average hull integrity and thus has 27 Hull Boxes (30% of 90), arranged as 7/7/7/6. Dividing 27 by 5 gives us 5.4, which is rounded up to 6 for this purpose. The first CF dot will be placed in the sixth box of the damage track, the second in the twelfth box (i.e.: the fifth box of the second row), the third dot in the 18th box and the fourth in the 24th box; the fifth and final dot is placed in the last box on the damage track (the 27th). Each time the ship takes six points of cumulative damage, it will lose another CF and thus another DCP.

1) Write Orders for All Ships

2) Roll for Initiative

Both/all players roll a D6 each - highest roll has initiative for this turn.

3) Move Fighter Groups

Both players alternate in moving one fighter group each until all fighter groups in play have been moved (if desired); player who LOST initiative roll moves first. Fighter groups being launched this turn must be moved before those already in flight.

Any fighter groups currently allocated to screening ships are NOT moved in this phase .

4) Launch Salvo Missiles

Both players alternate in announcing and firing missile salvoes from any missile-armed ships; play alternates BY SHIP, not by single salvo. Player who LOST initiative roll launches first. A missile salvo marker is placed at the point of aim of each salvo.

5) Move Ships

Both players simultaneously move their ships, strictly in accordance with orders written in phase 1.

Fighter groups currently acting as fighter screens are moved at the same time as the ship they are screening, and must remain within the screening distance of the ship.

6) Allocate Missile and Fighter Attacks

All Missile Salvoes and Fighter Groups that are within the specified attack ranges of suitable targets (and wish to attack, in the case of fighters) are moved into attack positions (counters and/or fighter models are moved close to intended target model, so it is clear exactly what they are attacking). Fighter groups may, if desired, make a secondary move in this phase by expending a Combat Endurance factor.

Cargo Holds and Passenger Accommodations

Mass devoted to cargo or passenger space costs no additional points during the ship costing procedure, though of course the actual hull that encloses them is paid for in the normal way. Each Mass factor used provides one factor of Hold space (H) or Passenger space (P). The total amount of cargo or passenger space available on the ship is divided into four separate groups, in much the same way as the ship's hull damage boxes are divided into the four lines of the damage track - if the number does not divide evenly by four then the first holds or passenger areas are the larger ones.

Example: If a freighter has 50 MASS of cargo hold space, this would be divided into two holds of MASS 13 and two of MASS 12.

One of the holds or passenger areas is automatically lost each time the ship's cumulative damage reaches a threshold point, so in effect a ship loses approximately 25% of its cargo or passengers each time it suffers approximately 25% damage. When a hold or passenger space box is crossed off, any cargo stored in it is assumed lost and any non-evacuated passengers in that area are killed.

The holds and passenger spaces are arranged on the ship diagram as a row of four boxes, containing an "H" or "P" identifier as appropriate and a number that represents the actual capacity of the space. The larger spaces are placed first (to the left), and are the first to be crossed off as damage is taken.

Note that specialist areas on other ships may be represented in the same way as cargo and passenger space using exactly the same rules - for survey ships space devoted to scientific staff and lab facilities can be represented by boxes marked "S", and naval troop carriers will have "T" boxes to represent their troop accommodations.

7) Point Defence Fire

Any ship under missile and/or fighter attack allocates its defences against attacking elements, then rolls for effects. Fighter vs. fighter actions ("dogfights"), attempted fighter missile interceptions and screening actions by fighters are resolved BEFORE actual Point Defence fire is allocated to surviving targets. Note that ships equipped with Area-Defence Firecon systems may use their point-defence batteries to help defend other nearby ships in this phase, but each PDS may only be used ONCE in the turn - if it is used in support of another vessel, it is NOT available to defend the ship carrying it as well. Fighter groups defending against missile attacks fire in this phase also.

8) Missile and Fighter Attacks

All missile salvoes and/or fighter groups that penetrate defences in phase 7 now have their attacks resolved; damage resulting from these attacks is applied immediately, including threshold damage resolution if applicable.

9) Ships Fire

Starting with the player who WON the initiative roll in phase 2, each player alternates in firing any/all weapon systems on ONE ship at one or more targets subject to available fire control. Damage caused is applied immediately, and threshold damage checks are made where applicable as soon as all weapons fired by one ship at that one target have been used.

Tugs and Tenders

Under the new construction system, any ship can be made into a TENDER by having internal bay space allocated to carry other ships (whether the carried craft are FTL-capable or not), at the same rate as for carrying fighters and other small craft - ie: every 1.5 MASS used for hangar bay space provides capacity for 1 MASS of carried ship(s). Note that this allows for support and launching facilities, and is thus different from plain cargo space. Thus a ship with 30 MASS devoted to bay space could carry a MASS 20 ship (or 2 x MASS 10 ships, etc.). The points cost of such space is the same as for other hangar facilities, ie: 3 x the total MASS used.

10) Turn End

Players confirm that all actions for the turn have been completed as necessary. Any untargetted missile counters are removed from play. The next turn may now commence.

Salvo Missile Systems

The Salvo Missile System is the only completely new weapon introduced in this book it is either a set of launch tubes or external racks that fire groups of six relatively small anti-ship missiles, each group being termed a "salvo". The missiles are only one-turn duration (unlike the heavier missiles in the More Thrust rules). Each SM system may fire one missile salvo each turn. There are two types of missile salvo available - "standard" SMs and Enhanced-Range (ER) SMs. Both types work in the same way, but the ER missiles have (as their name implies) a greater range than the standard types, and cost proportionally more. Missile fire occurs in the same phase as FIGHTER GROUP MOVEMENT; that is, AFTER orders are written but BEFORE ships are moved. The firing player announces that he is firing a missile salvo, and places a salvo counter at his intended point of aim - this may be anywhere up to a maximum range of 24" from the firing ship (or 36" for an Enhanced-Range (ER) missile salvo, but must be within the boundaries of the fire arcs through which the SM system may bear. The marker is left in place while all ships are moved; if at the END of movement there is an enemy ship within 6" of the marker (in any direction) then the missiles will attack it; if there is more than one potential enemy target within 6", then the salvo will go for the CLOSER of them. Move the missile salvo marker next to target ship and apply countermeasures/defences before resolving missile hits. Note that if there is no valid target within 6" at the end of movement, the salvo is wasted and the counter removed from play.

[SPECIAL NOTE: if you choose to use the VECTOR MOVEMENT system given in this book instead of the "standard" FT movement rules, then we strongly suggest reducing the attack radius of Salvo Missiles from 6" to 3" - this will prevent the missiles becoming too accurate against the more predictable manoeuvre envelope of a vector-movement ship. If a particular scenario calls for the mixing of vector and cinematic movement ships, then allow missiles to attack if within 6" of a cinematic-drive ship but only within 3" of a vector-drive ship - if you want some "PSB" to justify this, then assume that the grav-drive (cinematic movement) ships have a higher drive signature for the missiles to home on than the reaction drives of the vector-movement ships.]

When resolving SM system fire, the target player must first decide what defences he is allocating against each missile salvo; after he has announced this the attacking player rolls a D6 for each salvo marker attacking - result is the number of missiles in the salvo that are actually on target. The target player then resolves defensive fire as follows:

For each Point-Defence System (PDS) that is allocated to anti-missile defence roll a D6 - rolls of 4 and 5 each stop ONE missile, 6 stops TWO and allows a reroll.

For each Class-1 Beam Battery or screening fighter that is allocated to anti-missile defence roll a D6 - rolls of 5 or 6 stop ONE missile (reroll on 6); 1-4 rolls have no effect. (Note that this is the roll PER FIGHTER in screening groups - so a full-strength group will roll 6 dice, killing a missile on each 5 or 6 scored.)

After subtracting any missiles that are intercepted from the score that the attacker rolled, any positive number is the number of missiles that actually get through the defences AND hit the target (yes, if there are no defences at all then at least ONE missile will always get through!).

For EACH missile of the salvo that reaches the target ship, roll 1 D6 - the number rolled is the number of damage points inflicted, and rolls of 6 score 6 but do NOT get a reroll. Screen systems do NOT reduce missile damage. If the target is protected by ARMOUR, then HALF of the total damage (rounded up) done by the salvo is taken on the armour, and the remainder on the hull even if there are still armour boxes left at that point.

Missiles that get through the defences ARE deadly, so try and stop them if you can!!

Example: two missile salvoes are fired at a single target ship. The ship has the following systems that can defend it against missile fire - one point-defence battery (PDS) and two Class-1 beam batteries that can function in a defensive role. Before he knows exactly how many missiles will actually strike home, the ship's captain has to decide how he will allocate his defences - he chooses to use the PDS alone against one incoming salvo, and the 2 Class-1 batteries to combine fire against the second salvo. The attacking player now rolls for each of his missile salvoes; for the first he scores a miserable 2, but gets luckier with the second and rolls 5. The first salvo has only two missiles on target, and the defending player rolls his PDS die and gets a 6, thus shooting them both down (he would be allowed a reroll for the six, but there is no point as both target missiles are already hit). For the second salvo, with five missiles incoming, the defender gets to roll 2 dice for his 2 Class-1 batts, and gets a 4 and a 6 - the 6 allows him a reroll, but he only gets a 2 with it. So, he has hit only ONE incoming missile. The end result is that four missiles of the second salvo get past all the defences, and deliver their warheads in a blaze of energy - a D6 is rolled for each of them, scoring 3, 1, 3 and a lucky 6; missile hits don't reroll 6s, so this gives a grand total of 3+1+3+6 = 13 damage points to the target ship - enough to cripple a smaller warship and cause some serious harm to even a large one. If the ship has seven boxes or more of ARMOUR, half of the total missile damage (rounded up), ie: 7 points, will be taken on the armour and the remaining 6 on the hull boxes.

Salvo Missile Mountings and Magazines

Salvo Missile systems come in two types: reloadable launching tubes (denoted Salvo Missile Launchers, or SML) which are fed from internal missile magazines, and externally carried one-salvo launch racks (termed Salvo Missile Racks, or SMR). If SMLs are fitted to a ship, the launcher itself takes 3 MASS while each salvo load carried in the internal magazines takes up 2 MASS for standard missiles and 3 MASS for enhanced-range types. An external SMR takes 4 MASS for the complete rack including a standard missile salvo, or 5 MASS for a rack with an ER salvo.

One SML may fire one salvo per turn provided ammunition is left in the magazines; one SMR may fire its salvo load at any time, but is then empty until replenished from a base or fleet auxiliary. SMRs provide the cheapest "maximum throw weight", since every missile on the ship may be fired at the same time if desired; for extended operations, however, one or two conventional launchers backed up by a good magazine capacity is the most flexible and cost-effective solution.

In general, SMRs tend to be fitted to smaller craft where the saving in mass is critical (and the ship may well not survive long enough to fire more than one or two salvoes anyway!), while SMLs and magazines are used more on larger classes which need sustained fire capability.

Examples: Fitting one SMR (assuming standard missiles) takes 4 MASS, as opposed to the 5 MASS needed for an SML with the same one salvo; however, one SML with a 2-salvo magazine takes only 7 MASS against the 8 needed for a pair of SMRs - though the ship with the single SML and the magazine can only fire one salvo per turn, while the twin-SMR ship can fire both at once. As the weapon load increases, the difference becomes more significant still - if you had 40 MASS available on a very large warship you could, if desired, fit 10 SMRs and be able to deliver all ten salvoes simultaneously, but the same 40 MASS would allow you to fit (say) four SML tubes and a 14-salvo magazine to feed them.

Magazine Capacities

Missile Salvoes for SMLs take up Magazine Capacity at the rate of 2 MASS per standard salvo, and 3 per enhanced-range salvo. The MASS allocated to magazine space during a ship's design stage may be broken down into separate magazines at the designer's discretion, but with the following important limitation: any one Launcher system may only be fed from ONE magazine, though a single magazine may feed more than one launcher. Thus if a ship has 2 SMLs and 8 MASS of magazine space, the designer may decide to fit just a single 8-space magazine feeding both launchers, or could give each launcher its own 4-space magazine instead. The disadvantage of the single magazine is that all the SM capability could be lost with one bad threshold roll (as one magazine is rolled for as a single system, regardless of its capacity or the number of salvo loads in it); on the other hand, with two smaller magazines the player does not have to option to feed missiles to either launcher - if one launcher is lost while it still has missiles in its dedicated magazine, those missiles are useless; they cannot be fired by another undamaged launcher that was not originally fed from that magazine.

The intended type of loadout is another factor to consider when installing missile magazines - in the example above, the ship with a single MASS 8 magazine could choose its loadout as 4 x standard salvoes or 1 x standard and 2 x ER salvoes (a 2 x standard and 1 x ER loadout is also allowed, but wastes 1 space in the magazine). If the same ship had 2 x MASS 4 magazines, however, carrying any ER salvoes would be much less efficient - the spare space in each magazine would be wasted.

The SM Magazine icon is a box linked by lines to the SM Launcher(s) it feeds; the number of salvoes carried in the magazine is indicated by small arrowhead icons within the box, which are crossed off as they are fired. For a STANDARD SM salvo leave the arrowhead white, and for an ER salvo shade it in black. SM Launchers have a black arrowhead in the actual launcher icon, but this has no bearing on the load carried in the magazine - SM RACKS, on the other hand, have either a white or black icon according to the load carried.

[Note that the ship designs in this book all assume standard salvo loads in the magazines - if you wish to load a ship with ER salvoes then shade in the required number of salvo icons and delete any unwanted ones - eg: if a ship design shows 3 standard salvo icons in a MASS 6 magazine, and you wish to use 2 ER salvoes instead, shade two icons black and cross off the third one.]

[Diagrams "SMR with standard salvo missile load", "SML with 3 x standard salvoes in capacity 6 magazine", "SML with 2 x ER salvoes in capacity 6 magazine" and "SMR with ER salvo missile load" are omitted from this transcription.]

Ship Design

New Ship Design System

The new design system presented here is intended to completely replace the original system given in Chapter 7 of the Full Thrust (2nd edition) rulebook. DO NOT mix parts of the two systems when designing a ship, as the results will be very odd!

The new system requires just a little more calculation than the old one, as some ship systems now take up percentages of the total ship mass, rather than being fixed values - however it is still a very quick and simple mechanism, and once used to it you should be able to generate new ship designs with as much ease as under the original system.

Total Hull Mass Rating

The "TOTAL MASS" of a given hull is a representation of the CAPACITY of that hull for outfitting it with drives, weapons, defensive systems etc. This total MASS figure is used to refer to the size of the ship - e.g.: a size 25 ship could be fitted with a maximum of 25 MASS of systems. Note that the MASS ratings of systems are abstract figures used to indicate the required volume, power requirements etc. rather than an exact measure of the bulk or weight of a given system - if you assume that (in a given background) one MASS is equivalent to around 100 tonnes, then a MASS 1 system (such as a Point Defence installation) will not necessarily weigh in at 100 tonnes; it will, however, require 100 tonnes (1 MASS) of hull capacity to mount the system and its infrastructure, control and power requirements, sensors, crew etc. etc.

Choosing Overall Ship Mass

Because the sizes of major items like Hull Integrity and Drives are calculated as percentages of the overall ship MASS, choosing a hull size that is not an exact multiple of 10 will mean that some system masses may not be whole numbers; some of these will be rounded UP and some DOWN.

In general terms, decimals of .49 and less should be rounded DOWN, while those of .5 or higher should round UP. The only specific exception to this rule is in the case of Thrust Factors, as explained below.

For example, if you are building a MASS 64 ship then the 10% required for the FTL drive will be 6.4, which will round down to 6. If the same ship's Main Drive is thrust-4, however, this will take 20% = 12.8, which will round UP to 13 MASS. In general, most designs will come out about even in the rounding of factors; occasionally a ship may end up fractionally better or worse off that another of broadly similar design, but that shouldn't be a serious problem - besides, if we don't give the maximisers and number crunchers SOMETHING to work at they'll all get bored!

IMPORTANT: Note that NO single system can ever be rounded down to MASS 0. A very tiny ship of (say) MASS 4 will still have to pay 1 MASS for an FTL drive (even though 10% for it is only 0.4). Thus the smallest possible FTL-drive ship is actually a MASS 3 scout or courier boat, that will use 1 MASS for Hull Integrity (an Average hull at 30%), 1 MASS for FTL drive (the smallest unit available) and 1 MASS for Main Drive (for which it could get thrust-6). The boat would be unarmed, and have just 1 damage box.

The smallest usable combat ship will be around 5 or 6 MASS, which will get you a tiny armed scout or light corvette with a single fire control and probably only a single small weapon system, crewed by a handful of VERY brave spacers.....

Atmospheric Streamlining

The provision of a streamlined hull to permit in-atmospheric operations consumes some of a ship's available MASS; this represents the necessary aerofoils, control surfaces and heatshields as well as the reduction in usable internal capacity caused by the streamlined hull shape.

In MORE THRUST, two types of aerodynamic hull were considered - FULLY and PARTIALLY streamlined. These classifications (and their effects) are retained under the new design system, but they now require MASS on the ship thus:

PARTIAL STREAMLINING uses 10% of the ship's total MASS, while FULL STREAMLINING uses 20% of the ship's total MASS. The POINTS COST of streamlining is 2 points per MASS used for the aerodynamics.

Example: to give a MASS 50 ship partial streamlining will use 5 MASS and cost an additional 10 points on top of the basic hull cost; to give the same ship FULL streamlining will use 10 MASS and cost 20 points.

Both MASS and points cost of streamlining are in addition to the costs of the basic hull strength chosen for the ship (see below).

Variable Hull Strengths

Rather than the old FT2 definitions of "Military" and "Merchant" hulls with fixed values for damage boxes (50% and 25%), FT3 uses a sliding scale of five different hull strength factors; the chosen hull strength now uses MASS from the ship's total, and is directly related to the number of damage boxes the ship has.

The Hull Strength represents the amount of the ship's structure that is devoted to reinforcing the basic hull envelope, including bulkheads, compartmentalisation, internal strengthening etc. It is entirely separate from the ARMOUR used (if any), which is external protection - it is perfectly possible to have a ship with a FRAGILE hull structure but lots of armour around it; in such a case the ship will be fine UNTIL some damage manages to get through the armour, in which case the hull integrity will fail very quickly!

Hull strengthHull Boxes
FRAGILE hull: 10% of total MASSHull Boxes = 10% of MASS
WEAK hull: 20% of total MASSHull Boxes = 20% of MASS
AVERAGE hull: 30% of total MASSHull Boxes = 30% of MASS
STRONG hull: 40% of total MASSHull Boxes = 40% of MASS
SUPER hull: 50% of total MASSHull Boxes = 50% of MASS

Examples (MASS 60 ship):

  • FRAGILE hull: 6 MASS, Hull Boxes = 6 (2/2/1/1)
  • WEAK hull: 12 MASS, Hull Boxes = 12 (3/3/3/3)
  • AVERAGE hull: 18 MASS, Hull Boxes = 18 (5/5/4/4)
  • STRONG hull: 24 MASS, Hull Boxes = 24 (6/6/6/6)
  • SUPER hull: 30 MASS, Hull Boxes = 30 (8/8/7/7)

Ship Design Procedure

Step 1

Decide on the overall size of your ship - the total MASS rating.

Example: We are building a Heavy Cruiser - sized vessel, and decide on a total MASS of 85. The basic POINTS COST of the basic hull will be the same as the MASS, i.e.: 85 points.

Step 2

Choose the HULL INTEGRITY level for the ship, from the following five options:

  • FRAGILE hull: 10% of total MASS
  • WEAK hull: 20% of total MASS
  • AVERAGE hull: 30% of total MASS
  • STRONG hull: 40% of total MASS
  • SUPER hull: 50% of total MASS

The MASS used for hull integrity is the given % of the total mass of the ship; the same number gives the HULL BOXES that the ship has to absorb damage points. The hull boxes are arranged in four rows to form the DAMAGE TRACK for the ship.

The POINTS COST of the hull integrity is TWICE the MASS used on it.

Example: We decide to give our Heavy Cruiser an AVERAGE hull integrity. This will use up 30% of the total 85 MASS, or 26 MASS (actually 25.5, rounded up). The points cost of the hull integrity will be 2 x the MASS used, i.e.: 2 x 26 = 52 points.

For HULL BOXES (or Damage Boxes) the chosen hull integrity gives the ship 26 Hull Boxes that will be arranged as 7/7/6/6.

Step 3

Choose and fit DRIVES to the ship: if selecting an FTL drive to give the ship an interstellar capability, this will require 10% of the total MASS. Decide on the required THRUST FACTOR for the ship's main drives, which use up MASS at the rate of 5% of total ship mass per thrust factor.

The POINTS COST of the total drive package is TWICE the MASS used on it.

Example: Our Heavy Cruiser needs an FTL drive, which will require 10% of the total ship mass (= 8.5 mass, rounded up to 9); we also decide on THRUST-4 for the Main Drive, which takes 4 x 5% = 20% of ship mass, i.e.: 17 mass. Total mass of drive package is thus 26 mass. Points cost for the drives is 26 x 2 = 52 points.

We now have a hull with drive systems installed; the total MASS used so far is 26 + 26 = 52, leaving 85 - 52 = 33 mass for fitting the ship out with other systems. The points cost so far is 85 + 52 + 52 = 189.

Step 4

Select the desired mix of offensive and defensive systems to fit to the ship, according to its intended role.

MASS and POINTS values of the various systems are set out in the systems table (see Mass and Points Cost Table below).

Example: The Heavy Cruiser we are designing is intended as a multi-role ship, for both extended patrols and as a combat ship to support the main battleline. Accordingly, we decide on a balanced mix of offensive and defensive systems to cope with a wide variety of possible threats.

We choose to fit TWO standard Fire Control systems to the Cruiser, costing 1 MASS each. This leaves us 31 MASS to play with.

The main offensive punch of the ship will be a mix of beam batteries and salvo missiles - we decide on two class-3 batteries each bearing through 2 arcs (each will bear Fore and one of the Fore Side arcs, to give overlapping coverage), at 5 MASS each, one class-2 battery with all-round fire (at 3 MASS), plus a backup armament of 2 class-1 batteries at 1 MASS each. A single Salvo Missile Launcher is mounted forward (covering the front 180 degree zone) at 3 MASS, with a magazine holding 3 standard salvoes (3 x 2 = 6 MASS). Total offensive systems mass is 5 + 5 + 3 + 1 + 1 + 3 + 6 = 24.

We thus have 7 MASS left for defensive systems to protect the ship; we decide on a good active defence capability of three Point-Defence Systems (PDS) at 1 MASS each, leaving us 4 MASS to use up. We could spend this on 4 boxes of Hull Armour, or alternatively we could fit a level-1 Screen generator for 4 MASS (5% of 85 = 4.25, rounded down to 4). On balance, we decide the Screen would be of more value, and go for that option.

So, the total systems fit for the ship is:

ItemMassPoints cost
Basic Hull (MASS 85)8585
Hull IntegrityMASS 2652
FTL DriveMASS 918
Main Drive (Thrust-4)MASS 1734
Sub-totalsMASS 52189
Class 3 Batts x 2 (2-arc each)MASS 1030
Class 2 Batt x 1 (6-arc)MASS 39
Class 1 Batts x 2MASS 26
FCS x 2MASS 28
SML x 1MASS 39
SM magazine (3 loads)MASS 618
Screen level-1MASS 412
PDS x 3MASS 39
Sub-totalsMASS 3395
TOTALSMASS 85290

Ship Diagram for the Mass 85 Heavy Cruiser described in the example above (the diagram is omitted from this transcription).

Options for the Example

There are any number of different choices we could have made when designing the Cruiser example above - some may have resulted in a better ship, some a worse one, though the true value of any design is really dependant on the threat it is facing at any given time.

If we had wanted to give our Cruiser a Fighter complement, we could have made space for this by dropping the SML and magazine, giving us the 9 MASS that one fighter group and its hangar bay requires. Alternatively, replacing the SML and its magazine with all Beam weapons would have given us a ship that could sustain its fire longer (as beams don't run out of ammo like the SM systems do) but would have not been able to deliver such a hard punch at the (hopefully) vital moment in the battle!

We could have chosen to drop the Hull Integrity to WEAK rather than AVERAGE, saving us 9 MASS that could have then been spent on Armour or other systems, but then the ship would only have had 17 Damage Boxes (arranged 5/4/4/4); fitting 9 boxes of armour would have boosted its survivability considerably, but only until it met a weapon that penetrated the armour and struck directly at its weaker hull. While it is of course possible to optimise a ship or fleet to take on a specific opposition, well-balanced designs will more often be the best option - if your regular opponent always seems to use beam-heavy ships then you might feel like leaving off things like PDS and armour in favour of better screens, until he turns up next week with some new designs sporting SMLs and fighter bays!

Mass and Points Cost Table

SystemMassPoints cost
Basic Construction
Basic HullTotal MASS of shipMASS x 1
Hull Integrity
FRAGILE hull10% of total MASSMASS x 2
WEAK hull20% of total MASSMASS x 2
AVERAGE hull30% of total MASSMASS x 2
STRONG hull40% of total MASSMASS x 2
SUPER hull50% of total MASSMASS x 2
Hull Armour (per box)MASS 1MASS x 2
Drive Systems
Main Drives5% of ship's MASS per thrust factor (minimum MASS 1)MASS x 2
FTL Drives10% of ship's MASS (minimum MASS 1)MASS x 2
Weapons and Systems
Class 4 Battery (1-arc fire)MASS 8, +2 per extra arcTotal MASS x 3
Class 3 Battery (1-arc fire)MASS 4, +1 per extra arcTotal MASS x 3
Class 2 Battery (3-arc fire)MASS 2, +1 per extra THREE arcsTotal MASS x 3
Class 1 Battery (6-arc)MASS 13 Points
SML (Salvo Missile Launcher)MASS 3 (Launch tubes only)9 Points
Salvo Missile MagazineMASS 2 per salvo, 3 per ER salvo3 x magazine MASS
SMR (Salvo Missile Rack)MASS 4, or 5 for ER salvo12 (or 15 for ER)
Submunitions PackMASS 13 Points
Needle BeamMASS 26 Points
Pulse Torpedo LauncherMASS 4 (1-arc) +1 per extra arc (up to 3 arcs maximum)Total MASS x 3
Other Systems (including genre-specific weapons)
Nova CannonMASS 2060 Points
Wave GunMASS 1236 Points
MinelayerMASS 2, + 1 per mine carried6 Points + 2 per mine
MinesweeperMASS 515 Points
Missile (MT type)MASS 26 Points
Reflex FieldMASS 10 (or 10% of ship MASS if greater)Total MASS x 6
Cloaking FieldMASS 2 (or 10% of ship MASS if greater)Total MASS x 10
Ortillery SystemMASS 39 Points
Hangar Bay (+craft)1.5 x MASS of small craft carriedBay MASS x 3
Point-Defence SystemMASS 13 Points
Fire Control SystemMASS 14 Points
Area Defence FirecontrolMASS 28 Points
Cargo/Passenger SpaceMASS 1 per spaceNo cost
Level-1 ScreenMASS 3 (or 5% of ship MASS if greater)MASS x 3
Level-2 ScreenMASS 6 (or 10% of ship MASS if greater)MASS x 3

The table prints "ORTILLERY SYSTEM" in the source; it is transcribed here as printed.

Fighter Types: All fighters require 1.5 MASS of hangar bay space per fighter, so a standard hangar for a 6-fighter group is 9 MASS.

Points costs are: (per group of 6):

  • Standard fighters: 18 points (3 each)
  • Heavy fighters: 30 points (5 each)
  • Fast fighters: 24 points (4 each)
  • Interceptor fighters: 18 points (3 each)
  • Attack fighters: 24 points (4 each)
  • Long-Range fighters: 24 points (4 each)
  • Torpedo fighters: 36 points (6 each)

[PLEASE NOTE THAT THE SPECIALISED FIGHTER TYPES LISTED ABOVE ARE DESCRIBED IN THE "MORE THRUST" SUPPLEMENT.]

Interface Craft and other light vessels are costed at 2 points per MASS of the craft. E.g. a MASS 10 Interface Lander would cost 20 points and require 15 MASS of available hangar bay space on its carrying ship.

Summary of Weapon Systems and Effects

New-Style Ship Diagram

The ship designs given in this book all use a redesigned ship diagram - please note that this is NOT an actual ship design, just a key to the symbols and icons used! (The key diagram is omitted from this transcription.)

Standard Ship Classifications and Typical Mass Ratings

The table below shows the standard basic ship classifications used by most space navies, along with the accepted designations and a rough guide to the typical mass ratings of the classifications; these figures are very loose, as most navies tend to classify ships by function rather than by tonnage - one fleet's Destroyer may, in reality, be a bigger and more powerful ship than another's Light Cruiser, hence the large overlap in most of the mass groupings.

Ship ClassAbbreviationMass Range
Scout or CourierSCMASS 4-10
CorvetteCTMASS 8-16
FrigateFFMASS 14-26
DestroyerDDMASS 24-36
Heavy (or "Super") DestroyerDHMASS 30-50
Light CruiserCLMASS 40-60
Patrol or Escort CruiserCEMASS 50-70
Heavy CruiserCHMASS 60-90
Battlecruiser or Light BattleshipBCMASS 80-110
BattleshipBBMASS 100-140
Heavy Battleship (or "Battledreadnought")BDNMASS 120-160
DreadnoughtDNMASS 140-180
SuperdreadnoughtSDNMASS 160+
Escort CarrierCVEMASS 80-140
Light CarrierCVLMASS 120-180
Heavy CarrierCVHMASS 160+
Attack CarrierCVAMASS 150+

Beam Batteries

Maximum range and number of dice rolled per shot is according to Battery class (see chart below). Screens reduce damage as noted.

Damage is as per table, with rerolls on scores of 6. All initial damage is taken from ARMOUR (if any), but REROLL damage applied directly to HULL even if armour boxes remain.

Note: Class 1 batteries ONLY may fire in limited PDS mode; roll 1 die per battery, scores of 5 or 6 kill 1 fighter or 1 missile from SM salvo (reroll on 6).

Dice at range:

Battery0-1212-2424-3636-48
Class 1 Battery1---
Class 2 Battery21--
Class 3 Battery321-
Class 4 Battery4321

Beam hit damage:

  • Unscreened target: 1-3 = no damage; 4-5 = 1 DP; 6 = 2 DP + reroll
  • Screen-1: 1-4 = no damage; 5 = 1 DP; 6 = 2 DP + reroll*
  • Screen-2: 1-4 = no damage; 5 = 1 DP; 6 = 1 DP + reroll*

* All reroll damage counts as if target is unscreened, as beam is assumed to have penetrated the screens on a roll of 6.

Pulse Torpedoes

Maximum range 30"; at 0-6" a hit is scored on 2+, at 6-12" on 3+, at 12-18" on 4+, at 18-24" on 5+ and at 24-30" on 6 only. Screens do not affect damage.

Damage per hit is 1D6, NO reroll. Half the damage scored (rounded UP) is taken on ARMOUR (if any), remainder on HULL.

Needle Beams

Maximum range 12"; firer must nominate target system and roll 1 die. On score of 6, target system is knocked-out and 1 DP is applied to HULL (weapon ignores ARMOUR). On score of 5, target system is unaffected but 1 DP is still inflicted on hull. Rolls of 1-4 are no effect. Screens do not affect damage.

Salvo Missiles

Maximum range 24". 1 D6 missiles per salvo will be on target, minus any stopped by defensive fire. Screens do not affect damage.

Damage is 1D6 per missile that hits, NO rerolls. Half the damage scored by each missile (rounded UP) is taken on ARMOUR (if any), remainder on HULL.

Extended Range Salvoes exactly as standard SM, except maximum range is 36".

Submunition Packs

Maximum range 18"; at 0-6" roll 3 dice, at 6-12" 2 dice and at 12-18" one die only. Screens do not affect damage.

Damage is as per Beam fire dice, with rerolls on 6. All initial damage is taken from ARMOUR (if any), but REROLL damage applied directly to HULL.

PDS (Point Defence System)

Against Fighters or SMBs, roll 1 die per PDS: 1-3 = no effect, 4-5 kills ONE fighter or missile, 6 kills TWO and allows a reroll (reroll kills are same as for first die roll).

On its own, a PDS may only protect the ship it is mounted on, but linked to an ADFC it may be used to engage anything that is attacking another ship within 6".

PDS may fire in a limited antiship mode instead of point-defence mode, at targets within 6" only - roll 1 die, scores of 6 inflict 1 DP on ARMOUR (if any), or HULL if no armour. There are no rerolls. Scores of 1-5 are no effect. Screens do not affect damage. PDS fire does NOT require an active FireCon system, even in its antiship mode - the installation has its own integral short-range FireCon.

ADFC (Area-Defence FireControl)

An enhanced FireCon system that allows a ship to protect other nearby ships with its PDS. One ADFC allows the ship's PDS (any number of them) to fire at any combination of threats (Fighters, SMBs etc) that are directly attacking one friendly ship that is within 6" of the ADFC-carrying ship. Any PDS used in this mode may not fire in other modes in the same turn. PDS used in AD mode roll dice and score kills exactly as normal PDS fire. An ADFC functions ONLY as an enhanced PDS fire-director link, and may NOT be used as a "normal" Fire Control System.