Call The Doctor
Call The Doctor Rulebook
Table of Contents
Table of Contents
Game Setup
Prepare the game as follows:
- Patient Status Card
- Medication Card
- Tools Card
- Prognosis Card
- Operation Card
- Scenario Card
- Operation Sequence Card
- Diagnostic deck (21 cards)
- 6 patient status markers
- 1 anesthesia marker
- 1 relaxation marker
- 5 bleeding markers
- 6 condition markers
- 1 anaphylactic shock marker
- 1 oxygen marker, 1 blood marker, 1 vital functions marker
- 1 writing implement
- 6 six-sided dice (d6)
You need a total of 24 markers for the game.
You can skip printing the diagnostic deck and instead use the online app. Just scan the code with your phone to access the deck — nothing needs to be installed.
How to Play — Summary
During the game, your task is to perform the operation according to the instructions on the Patient Card. You must do this before you run out of Time points and anesthetic gas.
Your primary task is to anesthetize the patient to the proper level so you can proceed with the operation. To do this, you administer appropriate medications.
When administering drugs throughout the game, you must consider their impact on the patient's attributes. This is continuously shown on the Prognosis Card; you must adjust medications to achieve the most favorable changes. There will be moments when a large amount of drugs is needed, and others when none are required. Remember that the number of drugs is limited.
Next, following the guidelines, you must carry out the operation by making incisions through successive layers. Here your main concern will be controlling bleeding.
Watch out for slowly creeping changes to attributes caused by Diagnostic Cards, the anesthetic gas level, and the body's reaction to drug administration. Over time, these can accumulate to the point that a fight for the patient's life becomes necessary.
At the very end, you must always suture the patient and wake them by reducing relaxation. This is very simple but takes time. Therefore, throughout the operation, keep in mind that you must manage your Time level — that is your main opponent.
In the game, changes to attribute levels are presented in two ways:
- A change always by exactly 1.
- A change by various values (including 1), for example −1 or +3.
Operation Sequence
Rules summary. This sequence is also printed on the Operation Sequence Card.
Start of the game
- Choose any scenario.
- Set the patient's initial attributes (from the Patient Card).
Each turn
- Roll 6d6. New dice pool. (See Dice Pool.)
- Draw a new Diagnostic card. Reveal a new Diagnostic Card. (See Diagnostic Cards.)
- Bleeding control. You may discard any die to stop all ongoing bleedings.
- Sedation track. Cross off the next space on the Sedation track.
- Using the dice pool. Perform actions using your pool. (See Using the Dice Pool, below.)
- End of turn time. Cross off the next space on the Time track. Apply any effect, if applicable.
- Status effects. Check whether the attribute levels on the Patient Status card trigger any effects.
- Check the Prognosis Card. Adjust status according to the Prognosis Card.
- Check conditions. Adjust status according to active conditions.
- Check bleeding. Adjust the blood state according to the bleeding level.
Dice Pool
At the start of each turn, roll your new dice pool by rolling 6d6.
After rolling your pool, you may reroll any number of dice once. You can do this only at this moment.
At any time (not only in this phase), you may change the value of any one of your dice to another value by spending 1 Time point. There is no limit to this action.
Using the Dice Pool
This is a key part of the turn. Use your dice pool to play medications and tools. Unused dice are lost.
You may spend Time points to change die values during this phase. When this causes you to cross off spaces with attribute changes, you also apply them on the Prognosis Card.
Bleeding Control (Turn Phase 3)
In this phase, you may sacrifice any 1 die to discard all pending bleedings. Regardless of how many there are, you discard them all with 1 die, treating them as staunched.
Sedation Track (Turn Phase 4)
At this point, you must choose the next space on the Sedation track. You may always choose a space at the same level as the previously crossed-off one, or 1 level lower or higher. If it contains status changes, apply them on the Prognosis Card.
End of Turn Time (Turn Phase 6)
Cross off the next space on the scenario Time track and apply any changes on the Prognosis Card. This does not end the turn.
Diagnostic Cards
Each turn, reveal a new random Diagnostic Card from the deck. When the cards run out, shuffle the deck and start again.
The card shows changes to the patient's prognosis this turn and any sensitivity to specific actions.
You may block any of these changes by discarding any of your dice. One die blocks one change or one sensitivity.
- Change to prognosis: You may block it with any die, or apply it on the Prognosis Card.
- Patient sensitivity: Any action that causes the specified change will be strengthened or weakened by 1 (regardless of the base magnitude, the modifier is always ±1 per action).
Not all cards have a sensitivity.
Example: After revealing the Diagnostic Card, the player uses two of their dice to block the pulse decrease and the sensitivity to temperature increase. The player then uses 2 medications on the patient and applies the changes on the Prognosis Card. This turn, the active Diagnostic Card has sensitivity to temperature increase. The administered drugs interact with it, meaning each one raises temperature by 1 additional point. In total, temperature increases by 4 points on the Prognosis Card.
Prognosis Card
Using the Prognosis Card, you record the anticipated changes to the patient's attributes. Diagnostic cards, medication and tool use, and the passage of time move the markers for each attribute, but these are only applied to the Status at the end of the turn. This lets you anticipate where action is needed before the patient's condition significantly worsens.
Each attribute on the Prognosis Card has 6 spaces showing increase and 6 showing decrease. You adjust the marker's position whenever a change is specified. Initially, each marker is in the middle, at value 0.
If, at the end of the turn, the marker is in a framed zone, this indicates too rapid a change of that attribute and triggers a specific effect. For example, a rapid drop in blood pressure by 4 triggers condition 3, i.e., circulatory collapse. If the track also shows a second, purple frame, it means this condition will occur when the patient is already in condition 2 and blood pressure still changes by +4 or more within the turn.
The Prognosis Card is resolved only during the "Check the Prognosis Card" phase. Only then do effects apply from the zones; a marker briefly entering a zone and later moving out has no impact.
The magnitude of change in a single turn cannot exceed 6. Any values above this no longer produce an effect.
Anesthesia and Relaxation are the only attributes that are not on the Prognosis Card. Any change to them is applied immediately on the Patient Status card.
Note: the framed zones and their triggered conditions for each attribute are printed on the Prognosis Card itself (printed page 8); they are not reproduced here as text.
Patient Status
The Patient Status card carries these tracks:
- Anesthesia track
- Relaxation track
- Infection track
- Oxygen saturation track
- Blood pressure track
- Coagulation track
- Pulse track
- Temperature track
- Bleeding track
- Conditions
- Oxygen track
- Blood track
- Vital functions track
Beyond the indicators present in the game, in reality you also monitor: ECG and heart rhythm, capnography (EtCO2), ventilation parameters (VT, RR, PIP, PEEP), anesthetic gas concentrations (MAC), diuresis, neuromuscular transmission (TOF), blood gas analysis (PaO2, PaCO2, pH, lactate), invasive pressures and waveforms (arterial line, CVP), and detailed coagulation tests (ACT, PT/INR, APTT, TEG/ROTEM). In the game, parameters are limited to the basics to describe the patient's overall condition.
In reality, real-time measurement is not possible for:
- Infection level: during surgery one assesses contamination risk instead (asepsis, exposure time, field cleanliness). Actual infection appears later — in tests (e.g., CRP, leukocytes), cultures, and wound observation.
- "Vital functions" as a single bar: in practice, this is a set of separate monitors and trends — ECG/rhythm, blood pressure (NIBP/IBP), SpO2, EtCO2, temperature, ventilator parameters, etc. There is no single aggregate meter.
- The exact "amount of blood" in the body continuously: blood loss is estimated (suction canister, gauze), hemodynamics are observed, and Hb/Hct are checked periodically via blood gas/lab tests.
- Oxygen as a "patient resource": FiO2 is set on the anesthesia machine, and the effect is evaluated indirectly — via SpO2 (pulse oximetry), PaO2 in blood gases, and ventilation parameters.
These attributes are presented in this form for the needs of the game mechanics.
Track Descriptions
- Anesthesia. With this track you set the patient's level of anesthesia. An appropriate level is needed to proceed to deeper layers during the operation. If anesthesia is too strong, you may trigger condition 3, i.e., circulatory collapse.
- Relaxation. This represents the level of muscle relaxation. As with anesthesia, to cut deeper layers we must further relax the patient's body. If the level is too high, condition 9 — prolonged neuromuscular blockade — will occur. At the end of the operation you must also reduce the relaxation level to the scenario-specified value.
- Infection. This track represents the patient's bacterial infection developing during the operation. A high level of this attribute leads to high fever (condition 1) and then to sepsis (condition 7).
- Oxygen saturation. Oxygen saturation of the blood. Too low causes hypoxia. As the only attribute, an excessively high level has no adverse effects.
- Blood pressure. Maintains perfusion — i.e., effective delivery of blood and oxygen to tissues; too low risks collapse, and a rapid surge may trigger a heart attack.
- Coagulation. The blood's ability to achieve hemostasis; too low may cause hemorrhage, whereas too high may cause thrombosis.
- Pulse. Beats per minute; too high risks a heart attack, whereas too low may cause collapse.
- Temperature. A measure of body heat reflecting metabolism and inflammatory response; a high level indicates fever, a low level reduces coagulation and oxygen saturation.
- Bleeding track. This is where you mark bleedings. Up to 4 markers may be placed here; the next one triggers the Hemorrhage condition.
These three attributes — Oxygen, Blood and Vital Functions — are key in the game, because losing all points on any of them means the patient dies and the game ends.
Track rule: the marker on a track activates not only the action where it stops, but also all actions before it on that side of the track (counting right to left from the neutral space). In the printed example, the marker stops on condition 5, and it triggers condition 5 and a decrease in oxygen saturation and blood pressure.
Conditions
The ten patient conditions are: 1 High Fever; 2 Arrhythmia; 3 Circulatory Collapse; 4 Hypoxia; 5 Heart Attack; 6 Massive Hemorrhage; 7 Sepsis; 8 Thrombosis; 9 Prolonged Muscle Relaxation; 10 Anaphylaxis.
Each condition card shows three things: 1) the condition number, 2) its consequences, and 3) its treatment method.
When an attribute reaches a specified level on the Patient Status card, or there is a rapid change on the Prognosis Card (both read at the appropriate moment of the turn), one of the 10 patient conditions may be activated.
If a condition is active, triggering it again has no effect.
- Consequences of the condition: When a condition is active, during the Check conditions phase it affects the Patient Status in a specific way. Apply these changes immediately, without using the Prognosis Card.
- Treatment method: Each condition has its own treatment method. When you meet the specified requirements, remove the marker from its space. The treatment must be completed within a single turn. However, if the activation requirements still apply, the condition will soon return.
Example: During the Check the Prognosis Card phase, the oxygen saturation track reaches its minimum level. This activates condition 4 (Hypoxia).
Example: During the Check the Prognosis Card phase, condition 5 (Heart Attack) was activated. During the Check conditions phase, this reduces Vital Functions and Oxygen levels.
Example: To cure condition 5, you must use medications 10 and 12 within a single turn.
Condition 10 (Anaphylaxis): Condition 10 is the only one that activates gradually, as a result of improper drug use. When you land on a "0" space on the Body's Reaction to Drugs track or use a medication with the wrong symbol, move the marker along the track. Once it fills the entire track, the next step activates this condition. The marker on this track cannot be moved backward. (See Body's Reaction to Medications track.)
Example: The marker was already on the last space. The player used a drug with the wrong symbol on the track, activating this condition.
Note: each condition's specific consequence values and treatment icons are printed on the condition tiles of the Patient Status card and on printed page 11; they are not restated here.
Medication Card
During the game, you have 13 different medications at your disposal. Proper dosing is crucial to the success of the operation.
Each medication entry shows: 1) the real medication name; 2) the body's reaction (the symbol shape, see Body's Reaction to Medications); 3) the available stock of the given medication; 4) the medication number; 5) the amount of the medication in reserve; 6) the effects of administering the drug to the patient; 7) the cost of use.
After using a medication, always cross off one space in its stock.
To increase supplies, you may use any die. Draw a frame on space 5 of the medication's reserve, and you may use this medication immediately (or later) by spending another die. When you exhaust all of them, the drug is no longer available.
Using 2 doses of Dantrolene in 1 turn grants 1 Relaxation point. (Printed on the Medication Card.)
The effects below are shown as attribute changes applied to the Prognosis Card, except Anesthesia and Relaxation, which are applied immediately on the Patient Status card. Blood and Oxygen supplies are listed separately.
| No. | Medication | Body's reaction symbol | Effects |
|---|---|---|---|
| 1 | Propofol | Hexagon | Oxygen saturation −1; Blood pressure −1; Pulse −1; Relaxation +1 |
| 2 | Ketamine | Diamond | Oxygen saturation +1; Blood pressure +1; Pulse +1; Temperature +1; Anesthesia +1 |
| 3 | Rocuronium | Triangle | Oxygen saturation −2; Blood pressure −1; Relaxation +2 |
| 4 | Hydromorphone | Hexagon | Oxygen saturation −2; Blood pressure −1; Pulse −1; Anesthesia +2 |
| 5 | Dantrolene | Diamond | Blood pressure −1; Pulse −1; Temperature −3; Relaxation +1 |
| 6 | Adrenaline | Triangle |
Supplies (listed on the same card): Blood +1 (supply #14); Oxygen +1 (Oxygen saturation +1 and Oxygen +1; supply #15).
Izoflurane is the anesthetic gas and is not a medication entry; it is used on the Sedation track (see Sedation track).
Note: the printed stock and reserve counts, and the cost of use for each medication (a die value or a pair of any dice, shown by icons at the left edge of each card), are printed on the Medication Card (printed page 12) and are not restated here.
Body's Reaction to Medications Track
Each medication administered to the patient provokes a specific bodily reaction. This track represents the consequences of administering medications in a given sequence. Whenever you use a drug, you must cross off its symbol on the track.
Each medication has one of 3 symbols; this defines the body's reaction to its administration: hexagon, diamond or triangle.
When administering the first medications, start by crossing off one of the two starting symbols. Then you may cross off subsequent symbols that are directly connected to those already crossed off:
- to the right of them (never to the left), and
- vertically, both up and down (a slight right/left slant doesn't matter).
When you use a medication, cross off its symbol on the track. Then cross off the next box from that medication's supply list.
When, while crossing off the next symbol, you pass an attribute symbol, apply its effect on the Prognosis Card (in this case, increase blood pressure by 1).
When you hit such a symbol (an Anaphylactic Shock symbol), move the marker to the next space of the Anaphylactic Shock condition.
You may use a symbol different from the one shown on the medication you played, but this moves the marker on the Anaphylactic Shock track.
Example: The player uses Rocuronium. They must use the triangle symbol. In doing so, they cross the saturation symbol; apply a −1 decrease on the Prognosis Card.
Example: The player then uses Esmolol. They must use the diamond symbol. There are 2 paths; they choose the one that advances the track for condition 10.
In reality, a patient responds to the same medications in a similar way — reactions are predictable unless there is an allergy. In the game, however, the Reaction track shows this in a more chaotic, unpredictable form, reflecting the tension and risk of the operating room and adding a tactical element.
Note: the track is a branching network of symbols printed on the Patient Status and Medication cards (printed page 13). Its exact layout is graphic and is not reproduced here.
Blood and Oxygen Supplies
These two resources are crucial during the game because they allow you to restore points on the tracks on which the patient's life depends.
You may use either blood or oxygen by spending any die. This does not require marking the Body's Reaction to Medications track.
Example: The patient has lost a lot of blood. The player spends 3 dice to use 3 units of blood and records this on the Prognosis Card. Then they spend one more die to increase reserves. However, they have no more dice to immediately use an additional unit of blood.
Sedation Track
In the game, the operation begins when the patient is anesthetized. At the start of each turn, you decide whether to decrease, increase, or keep the anesthetic gas dose unchanged, which often triggers specific changes in the patient's status.
The Sedation track (Izoflurane) has three levels: low, medium and high. In the first turn, you choose one of 3 values; if it contains an attribute symbol, apply it on the Prognosis Card. Some spaces show no effect on the patient.
In each subsequent turn, you must choose the next space, deciding whether you increase, decrease, or keep the gas level unchanged. If the previous value was the lowest or highest, only 2 spaces are available; from the middle level, you can always choose among all 3 options.
Example: In the previous turn the level was low, so now you may choose the same level or increase it to medium.
Example: In the previous turn the level was medium, so now you may choose the same level, raise it, or lower it.
Example: In the previous turn the level was high, so now you may choose the same level or lower it to medium.
The Sedation track ends the game when the gas supply is depleted (there are no more spaces on the Sedation track).
Tools
During the operation, many different tools and procedures will be used. Each has a specific application.
There are 4 groups of elements: 1) Procedures; 2) Tools for bleeding control; 3) Tools for special applications; 4) Cutting tools. Their ways of use are described under 5) Ways to use cutting tools.
There are 3 mechanisms for using these elements:
- One-shot. When using this, you permanently cross off the required dice (in any order). When you cross off the last one, the action is performed. You may split this across several turns. This mechanism applies only to procedures.
- Direct use. Spending the required die performs the action immediately. You may use each required value once per turn. For example, if you already used a die showing 1, to use it again this turn you must spend two any dice or a 5. There is no limit to the number of uses in the game.
- Activation. Spending the required die activates the tool for this turn. From that moment, you may use the actions it enables, each with its own separate cost. Each of those actions can be performed without limit. Any number of tools may be active at the same time.
All tools except the laser may be used any number of times in the game (though they have per-turn usage limits).
In the operating room, a much wider range is used: retractors, hooks, needle holders, skin and tissue staplers, vascular clip appliers, vessel-sealing devices, ultrasonic scalpel, laparoscope with trocars and camera, drains, orthopedic drills/screws, and even nerve neuromonitoring. The set in the game covers the key actions (incision, hemostasis, exposure, suturing, control of bleeding and temperature) and offers many decisions with low complexity.
You have access to all of them from the start of the game; you must decide yourself which are appropriate at a given moment. For cutting tools, you must also follow the conditions on the Operation Card regarding which one may be used in a given layer.
Each tool entry shows: 1) the tool number; 2) the tool cost; 3) the tool effect.
Bleeding Control Tools
1. Bipolar Electrocautery. Used to permanently stop bleeding. After spending the required die, you may remove 1 bleeding marker from the Bleeding track. You may use it up to three times per turn by paying different required dice.
- Cost: two any dice, or a die showing 1, or a die showing 6.
Example: As a result of the incision, the patient has 2 Bleeding points. The player first uses dice 2 and 4 (as two "any" dice), then a 1 to staunch the bleeding with tool #1.
2. Hemostatic gauze. Used to suspend bleeding. After spending any die, you may move 1 bleeding marker from the Bleeding track to the pending-bleeding space. You may use it up to three times per turn with any dice.
- Cost: any die.
3. Surgical ligature. Used to permanently stop venous bleeding. After spending the required die, you may remove 1 venous-bleeding marker from the Bleeding track. You may use it up to three times per turn by paying different required dice.
- Cost: two any dice, or a die showing 2, or a die showing 6.
Example: As a result of the incision, the patient has 2 Bleeding points and 2 vein-bleeding points. They permanently stop one venous bleed using tool #3 and a die showing 6. They permanently stop one venous bleed using tool #3 and a die showing 6. Then they suspend two bleedings with tool #2 and dice 3 and 4. One venous bleeding remains.
4. Hemostatic forceps. Used to suspend venous bleeding. After spending the required die, you may move 1 venous-bleeding marker from the Bleeding track to the pending-bleeding space. You may use it up to three times per turn with any dice.
- Cost: any die.
Tools for Special Applications
5. Surgical forceps. With this tool you can remove spaces. To activate it, first spend any die. Then use selected dice to mark the × spaces by writing their values into them. You may spread this marking over multiple turns. Then, within a single turn, you must remove all marked spaces by spending dice whose total value is exactly equal to the sum of all marked spaces. A change removed by this tool must be cleared within a single turn.
- Activation: any die.
6. Surgical aspirator. With this tool you can remove spaces. To activate it, first spend any die (only once per turn). Then choose a starting spot for suction — using 1 chosen die, remove spaces that are directly connected to each other and together sum exactly to that die's value. You may use this any number of times per turn, starting suction from any point. The action may be split across any number of turns. You must use the die's full value; if that's not possible, you cannot perform the action. If a space is already crossed off, it does not serve as a connector for a subsequent action using another die.
- Activation: any die (once per turn).
- Removal: a die whose full value is used on connected spaces.
7. Surgical needle with suture. A tool that must be used at the very end of the scenario to suture the patient. To activate it, first spend any die. Then you may begin suturing from the bottommost layer (once it is complete, you may proceed to the next). To suture, use die values that equal the number of cut points on the Operation Card marked for this layer. Use a die of any value; for each 1 point on the die you may suture 1 incision point on the layer. Mark this by circling it. This means that to close a single incision you need a total value of 2. After marking two points, mark the incision line with perpendicular strokes. You must suture them all to end the operation.
Variant reading: the alternate printing of this rulebook ("RULES ENG.pdf") reads "topmost layer" in the sentence above; this transcription follows the printing that reads "bottommost layer".
When suturing a given layer, you must use a die value (sum of values) exactly equal to the number of incision points on that layer (no more). For example, with 7 incision points you must use dice that total exactly 7; any excess cannot carry over to the next layer, which you may start only after finishing the current one.
Example: The player intends to suture the skin layer. There are 5 incision points here. They use a die showing 1 to activate the needle and suture. They use a die showing 3 to suture 3 incision points. In the next turn, they finish suturing by closing the last 2 points with a die showing 2.
- Activation: any die.
- Suturing: die values summing to exactly the number of incision points on the layer.
8. Thermal regulation blanket. This is the simplest tool to use. With it, you can raise or lower the patient's temperature. You may use this tool any number of times in a turn.
- Decrease temperature by 1: spend two any dice, or a die showing 1.
- Increase temperature by 1: spend two any dice, or a die showing 4.
Example: The patient's temperature has risen significantly. The player uses two dice showing 3 and 6 and a die showing 1 to reduce it by two points. They record this on the Prognosis Card.
Cutting Tools
9. Scalpel 20. Basic scalpel used for long incisions. Activated with any die. With it you can make 8 types of long incisions. In every case, the incision must be completed in full. After spending the die, choose either the lower or upper pattern.
10. Scalpel 10. Scalpel used for precise incisions. Activated with 2 any dice, or a single die of value 1 or 2. With it you can make 7 types of short incisions. In every case, the incision must be completed in full. After spending the die, choose either the lower or upper pattern.
11. Laser scalpel. Laser scalpel used for precise incisions. Activated by a pair of dice: any die + 3, or any die + 5. With it you can make 3 types of short incisions. Incisions made with it do not cause any kind of bleeding. When you use the laser scalpel, incisions are not marked on that layer's incision track. This is the only tool with limited uses. After each incision, mark a box on its list. You may use it any number of times in a turn, but only 6 times total in the entire game.
12. Bone saw. The only tool that may be used to cut bone. It can be used exclusively for this purpose. Activated with 2 any dice, or a single die of value 1 or 5. With it, you can perform 3 types of short incisions. In every case, the incision must be completed in full.
Example: The player begins incising the patient. On this layer they may use only tool 9 for cutting. They use a die showing 3 to activate this tool for the turn. Then, using two 5s, they make an incision.
Example: The player begins incising the patient. On this layer they may use tools 9, 10, or 11 for cutting. They use a die showing 3 to activate tool 9. With a 6, they make an incision. Then they activate the laser scalpel by spending dice 2 and 3. Using the laser scalpel, they make an incision through veins that does not cause bleeding. They use two dice of value 2 for this.
Note: the cutting-tool entries above give the activation costs as printed on each tool card. The incision-pattern diagrams for tools 9 to 12 (each pattern with its own cost icon) are graphic and are read from printed page 20.
Procedures
Procedures allow a fairly abrupt impact on the patient's status. All of them, except crystalloid therapy, may be performed only once during the entire game.
Unlike other actions, the die spent to activate it is crossed off on that procedure's card.
Preparing a procedure can also be spread over multiple turns, and dice may be crossed off in any order during that time. Crossing off the last one performs the procedure.
Each procedure card shows: 1) the procedure cost; 2) the procedure effect; 3) the condition to perform the procedure (if none, it may be used at any time).
In a real operating theatre, the range of interventions is enormous — from vasoactive medications and blood component transfusions, through advanced hemostasis and ventilatory maneuvers, to warming, reversal of neuromuscular blockade, or actions per resuscitation algorithms. These are dozens of decisions based on monitor trends, consultations, and team logistics. In the game, a small set of procedures was chosen to cover the critical elements. Thanks to this, every decision has an immediate, clear effect and conveys the atmosphere of the operating room.
- Crystalloid fluid therapy. The Crystalloids procedure may be used 4 times during the game, affecting the patient's temperature and increasing blood pressure. It can always be used.
- Lung recruitment. Lung recruitment allows a rapid improvement of oxygen saturation. It may be used only when the patient is in the state of Hypoxia (condition 4). Its cost is three dice of value 4.
- Needle decompression. A procedure performed for a purpose similar to lung recruitment, but more invasive and with stronger effects. It may be used only when the patient is in the state of Hypoxia (condition 4).
- Defibrillator. The defibrillator is the only way to restore Vital Functions. It may be used only when this attribute reaches its lowest value.
Example (Crystalloids): At the end of the turn, the player used dice 2 and 3 to prepare the Crystalloids procedure. Two turns later, the player used die 1 to administer crystalloids to the patient. They record the changes on the Prognosis Card.
Example (Lung recruitment): The patient is in a state of hypoxia. The player spends two dice of value 4 to start lung recruitment. Lacking the last 4, they spend 1 Time point to change a die value and perform the recruitment procedure. This can be done only once per game.
Example (Defibrillator): The patient's Vital Functions have dropped to the last position. This is the only moment when the defibrillator can be used. In one of the previous turns, the player had already prepared its use by spending a die showing 6. Now they have only one 6 in their pool, which they spend, then they spend 2 Time points to change the value of two dice and use the defibrillator immediately.
Note: the exact cost dice and effect values of Crystalloids, Needle decompression and the Defibrillator are printed on the procedure cards (printed page 16) and are not restated here.
Obstacles
While cutting you will encounter 3 types of obstacles: veins, nerves, and bacteria.
Veins. This is a basic obstacle that should be avoided. It appears in the game in various shapes and sizes. When an incision crosses the vein graphic (even a small part of it), venous bleeding occurs and must be marked on the Bleeding track. Veins can be permanently stopped with tool 3 (Surgical ligature), and can be suspended with tool 4 (Hemostatic forceps).
In surgery, an incision may damage small vessels, veins and arteries, and bleeding control requires appropriate techniques (pressure, electrocautery, ligature). In the game there is deliberately no arterial bleeding, to avoid excessive mechanical complexity. Here we distinguish only "bleeding" and "venous bleeding" to reflect different risks and hemostasis techniques without the full complexity of the real OR.
Cutting the same vein multiple times causes the same consequences each time.
Nerves. It appears in two shapes. Cutting this obstacle has much more serious consequences. When an incision crosses the nerve graphic (even a small element), the following occurs: loss of 2 Vital Functions points and loss of 1 Anesthesia point.
In real surgery, nerve injury risks loss of sensation or movement and, when irritated, a strong pain-stress response — usually visible as increased pulse and blood pressure. In the game this is simplified to a drop in Vital Functions and Anesthesia after cutting a nerve — a shorthand to immediately indicate a serious injury to be avoided.
Remember that you cannot make incisions on a layer if the patient does not have the required level of anesthesia.
Cutting the same nerve multiple times causes the same consequences each time.
Bacteria. Shown with a bacteria symbol. If an incision passes through this marker, the Infection track (on the Prognosis Card) increases by 1.
In a real operation there are no "infection fields" — what matters is asepsis: sterile instruments, sterile draping, skin disinfection, and avoiding breaches. Any infection appears only after the procedure, not during the incision. In the game this mechanic is a symbolic simplification emphasizing that every breach of sterility increases complication risk.
Bleeding
During the operation you will encounter 3 types of bleeding.
Blood loss. A one-shot action that represents an immediate loss of Blood points. Mark this on the Prognosis Card. It requires no additional actions and cannot be prevented. It can be triggered by the incision track, by Hemorrhage, or by a time-related action.
Bleeding. An action marked on the Bleeding track. Blood loss occurs at the end of the turn during the "Check bleeding" phase. It can be triggered by the incision track (by the first incision), or by a time-related action. It can be suspended with tool 2 (Hemostatic gauze) or permanently stopped with tool 1 (Bipolar electrocautery).
Venous bleeding. An action marked on the Bleeding track. Blood loss occurs at the end of the turn during the "Check bleeding" phase. It can be triggered only by cutting veins during an incision action. It can be suspended with tool 4 (Hemostatic forceps) or permanently stopped with tool 3 (Surgical ligature).
The Bleeding track contains 4 spaces for bleeding and 4 spaces for venous bleeding. However, they constitute a total of four places in the bleeding pathway. This is the total number of markers that can be found in this place. Only one marker may be in a given column. Regardless of type, they share a common pool of 4 spaces. When a fifth marker appears, it triggers the Hemorrhage condition (condition 6). A suspended bleeding also occupies a slot on the track.
Example: The player has 2 suspended bleedings. At the end of the turn they will lose 2 Blood points; the suspended ones do not cause loss.
Full track and a new bleeding. When the Bleeding track is full and the Hemorrhage condition is active, and a new bleeding point appears, the following occurs: cancellation of all suspended bleedings (if any are on the track), and loss of 2 Blood points (marked on the Prognosis Card). The suspended bleedings return, and there is also blood loss (−2).
Suspending bleeding. Using tools 2 and 4, it is possible to suspend bleeding. Mark this on the track by moving the marker from bleeding to the pause symbol. A suspended bleeding does not cause blood loss during the "Check bleeding" phase at the end of the turn. A suspended bleeding persists into each subsequent turn; it does not need to be reactivated.
At the start of the turn, during the Bleeding control phase, you may spend any 1 die to remove all suspended-bleeding markers. When discarding suspended bleedings creates free slots, place any new bleeding markers in those slots.
Example: At the start of the next turn, they spend a die to discard all suspended bleedings — they are treated as staunched.
Example: The player makes two more incisions on the layer, and two further bleedings appear on the track. This move completes work on this layer. Unfortunately, with the last move a vein was cut — the Bleeding track is full, so condition 6, Hemorrhage, will be triggered.
Incision
A key element of the game is making incisions. To do this, you must follow several rules:
- You may make incisions on a given layer only after bringing the patient to the required, or higher, level of anesthesia and relaxation for that layer.
- You may perform incisions and all actions only on the current layer. Only after completing all tasks may you proceed to the next layer.
- On a given layer, you may use only the specified cutting tools. This does not apply to bleeding-control or special-application tools — those may always be used freely.
In the game, you make incisions in two ways:
- Planned. The scenario defines the points between which you must perform specific actions. In this case, you must start and end incisions at the designated locations.
- Freeform. The scenario does not specify any points; you may start and end incisions anywhere, as long as you complete the objective.
When the required conditions are met and you have activated the tool, you may proceed to make the incision. Choose an incision pattern and pay its cost. Transfer that pattern in full onto the layer you are cutting. Mark the first and last points with a clear X.
Incision patterns may be used symmetrically in either direction. You choose the direction of the cut. They may not be mirrored — the incision must follow the pattern.
When performing successive incisions, the new one must start where the previous one ended. This is the boxed point. Keep this in mind when planning your next moves.
If the scenario specifies this, the layers on which you must make planned incisions must have the same start and end point on each listed layer. The incisions may follow any path, but they must keep the same start and end as chosen on the first layer.
Planned incisions must form a single continuous pattern. In the case of freeform incisions, they may follow any path.
If multiple tools are allowed on a single layer, you may freely mix the incisions performed with them.
If you end or start an incision on a space other than the required one, or if the incision goes outside the play area, you incur a penalty of 2 Bleeding points for each point between the used point and the required one.
Example: If the player ends the incision on this layer here, they receive 2 Bleeding points (that's how far this point is from the required one). They could also route the incision downward to avoid this.
Example: The incision made at the very end extends 2 spaces beyond the cutting zone, which means an additional 2 Bleeding points.
Incision Track
Each layer has an incision track. If a layer has the first-incision symbol, each started incision (called the first incision or first cut) causes 1 Bleeding point. This applies to the whole incision pattern, not its individual points.
Each new incision point is marked on that layer's incision track. This means that if the next incision pattern crosses, for example, 3 points, you cross off that many spaces on the track. Count only new spaces, bearing in mind that the start of the next incision is placed on a space already used.
If you cross off such a space on the track, it means 1 Bleeding point. If you cross off such a final space on the track, it means 4 Bleeding points. Each additional point after the track is filled means another 4 Bleeding points.
In surgery, the goal is straight, decisive incisions — the fewer unnecessary moves, the smoother the wound edges, the easier the suturing, and the less bleeding. That's why the game uses an incision track: each additional, unnecessary move means a more ragged wound and a marked increase in bleeding.
Example: The player makes two incisions. As a result of the first incisions, the patient gains 2 Bleeding points. On the incision track they mark 5 points. They spend 2 dice to use gauze twice and suspend 2 Bleeding points. They make another 2 incisions. Two further bleedings appear on the track. This move completes work on this layer.
Operation Card
The Operation and Patient cards always come as a pair. They are the only interchangeable components in the game.
On the Operation Card you will encounter these elements:
- Layer number. During the operation you will cut through successive layers (e.g., skin, fat, muscle), reaching deeper into the patient's body. You must always cross them in order; you may proceed to the next only after completing all tasks on the current one.
- Incision track. This is where you mark each incision performed. Each layer has a required level of Anesthesia and Relaxation. You may cut on it only if the patient has the required level (exactly the same; it cannot be higher either). In addition, this space may show the first-incision symbol, which means bleeding is caused when starting each incision on this layer.
- Layer conditions. Each layer has a required level of Anesthesia and Relaxation (see above).
- Allowed tools. Each layer specifies which cutting tools may be used on it. Sometimes a special tool is also indicated as required for a given task. You may not cut with others, but you may use tools from the other categories.
- Operated layer. A key element of the operation. This is where you perform the actual procedure: making incisions.
- Time track. In the End-of-Time phase, cross off the next space here. This may entail effects on the patient's attributes, which you record on the Prognosis Card. During the game you may change die values by spending Time points, which you also mark on this track.
- Scenario number. Each Operation Card and Patient Card are linked by their ordinal number as a scenario.
- Location on the body. The place on the body where the operation is performed. A flavor element.
- Case description. A narrative introduction with no impact on gameplay.
On the Operation Card you will also encounter objects with special marks: objects marked with a yellow frame must be excised by encircling them with incisions; they must not be damaged in any way. Other objects are marked with scenario-specific rules (for example, objects in a fluid-like state that can be removed with suction, and objects that must be extracted with forceps). Some objects require cutting.
End of the Game
The game ends in success if you complete all scenario tasks before running out of Time points and anesthetic gas.
The player loses when:
- the pool of all Time points is exhausted;
- the patient has lost all points of Oxygen, Blood or Vital Functions;
- the supply of anesthetic gas is depleted (there are no more spaces on the Sedation track).
Multiplayer Mode
The game is designed for one player, but 2- or 3-player cooperative play is possible. Players have their own dice pools and use them at their discretion. With 2 players, each has 3 dice; with 3 players, each has 2 dice.
Each player rolls their pool secretly and does not reveal the results to others — only when using a die.
During the game, players should confer on actions to take, but each ultimately decides how to use their own dice. There is no fixed turn order; all actions are carried out as agreed by the players.
Without knowing other players' die values, discussing who will take which task is a key element of the game.
You can also play competitively with any number of players. In that case, each player runs the same scenario in solo mode and tries to complete the operation successfully first.