Bloodfields
Bloodfields Rulebook
Table of Contents
Table of Contents
- Preparation
- The Battle Round
- Unit Card
- Skill Profiles
- Dice Mechanics
- Unit's Turn
- Combat
- Move Action
- Charge Action
- Attack Action
- Abilities and Passives
- Magic Action
- Battle Focus Action
- Extra Actions
- Flee Action
- Morale Test
- Visibility and Targeting
- Terrain
- Tokens
- Traits and Bonuses
- Gameplay Rules
- Warmachines
- Items
Preparation
Start of the Game
-
Prepare Rosters
- In order to play, each player needs to create a roster. This can be done with a web app on bloodfields.net.
- Each unit has a blood point cost.
- The sum of blood points in each roster cannot exceed a number agreed upon by players or set by a scenario limit.
- All units are divided into realms and lines. In a roster, units can be added from different lines within a realm. However, if all units come from the same line, they receive a Loyalty Bonus that is different for each line.
- Prepare all miniatures and unit cards for units that will be used in the battle.
-
Prepare a Scenario
- Pick a scenario from the Scenario Book. Scenarios have different objectives, restrictions, duration, and special rules.
- Set up terrain as described in the scenario's setup.
- For the game, you will also need Dice, Measuring Tools, Inspire and Damage Tokens.
- Additionally, check the rosters for units that may require dedicated tokens.
-
Begin the First Battle Round
Start of the Game: Sides and Initiative
-
Roll for Sides/Initiative
- Each player rolls a 2D6. The one with the higher result can either choose to:
- receive an Initiative Token,
- pick their side of the battlefield.
- Once the player makes his or her choice, the other player gets the remaining option.
- Each player rolls a 2D6. The one with the higher result can either choose to:
-
Deploy Your Troops
- Each battlefield has two sides in which each player can deploy their units.
- The player with the Initiative Token is the first to choose one of the units from their roster and place it in the deployment zone on their side.
- Deployment zones may vary depending on a scenario.
- Afterwards, the second player places one of their units in the same manner, and the players alternately repeat this process until all their units are on the battlefield. If one player runs out of units, the other simply deploys all of their remaining units.
The Battle Round
-
Initiative
- At the beginning of each round, the player with the Initiative Token decides which player will be the starting player. The starting player is the first to activate one of their units in a round.
- If the player with the Initiative Token chooses himself as the starting player, then he or she passes the Initiative Token to the opponent. The opponent will be deciding who is the starting player in the next round.
- If the player with the Initiative Token chooses the opponent to be the starting player, the player keeps the Initiative Token. The same player will again be deciding who is the starting player in the next round.
-
Inspiration
- Once the starting player is chosen, the players distribute Inspire Tokens to their units. First, the starting player distributes all Inspire Tokens available to them and then the opponent does the same. Inspire Tokens can be placed next to the models or on the unit cards but they have to always be visible to all players.
- Typically, the number of Inspire Tokens that can be distributed by a player is equal to the number of their alive units. Some scenarios and effects may change this number. Players may distribute the Inspire Tokens among their units in any way they see fit (each unit can have one, multiple or no Inspire Tokens at all).
- During the round, units may spend Inspire Tokens to pay for attacks and abilities or to improve their attack and defense rolls.
- At the end of the round, all unused Inspire Tokens are removed from all units.
-
Unit Activation
- The starting player is the first to choose one of their units and to activate it.
- The activated unit can perform 2 actions, after which the unit's activation (turn) ends.
Unit Card
Each unit has a unit card with their individual skills and statistics that make them unique.
Unit Statistics
- Name - unit's title.
- Realm Icon - icon of the unit's realm.
- Illustration - unit's appearance.
- Traits - unit's subtypes that apply additional rules.
- Blood Points - unit's cost to play in battle.
- Passive - unit's passive ability.
- Melee Mastery (MM) - used in melee attack actions.
- Ranged Mastery (RM) - used in ranged attack actions.
- Arcane Mastery (AM) - used in magic attacks and magic tests.
- Movement (MV) - used in move action and charge tests.
- Morale (MO) - used in flee action and morale tests.
- Armour (AR) - unit's defense, used in defense rolls.
- Health Point (HP) - used to keep track of a unit's life.
- Attacks, Spells and Abilities - used when performing various actions.
Skill Profiles
On a unit card, there are a unit's unique skills. Each skill has a name and rules and may have a "Unique" indicator. Additionally, each different skill type has some distinctive elements.
Pay extra attention to the following two symbols that can be found next to the skill's name:
- Unique Indicator (star icon) - if present, the skill can be used once per turn.
- Effortless Indicator (lightning icon) - if present, using the skill does not cost an action.
Example Profile (Common Elements)
The following are the elements of every skill.
- Name and Indicators - the skill's distinctive title and type (effortless/unique).
- Rules - effects applied by the skill.
Melee Attack Profile
Melee attacks are used to deal damage to enemies in combat.
- Inspire Cost Value - the amount of Inspire Tokens that have to be spent to use the attack.
- Die Icon - the number of dice rolled when the attack is performed.
- Damage Icon - the amount of damage dealt by each unsaved hit.
Ranged Attack Profile
Ranged attacks are used to deal damage to enemies at range. The ranged attacks have all the same elements as the melee attacks with one important distinction.
- Range Value - the distance at which the attack can be performed (always in the first line below the Name).
Spell Profile
Spells allow Mages to perform a wide range of effects.
- Spell's Difficulty - the value that has to be passed in the Magic Test in order to cast the spell.
Magic Attack Profile
Magic attacks are used by Mages to deal damage. They have the same elements as Spells, with the addition of elements used in Melee and Ranged Attacks.
- Spell's Difficulty - the value that has to be passed in the Magic Test in order to cast the spell.
- Die Icon - the number of dice rolled when the attack is performed.
- Damage Icon - the amount of damage each unsaved hit from the attack deals.
- Range Value - if present, it indicates the distance at which the Magic Attack can be performed, making it a Ranged Magic Attack. Otherwise, the Magic Attack is a Melee Magic Attack.
Passive Ability Profile
Apart from the main passive on the top of the unit card, units may have additional passive abilities that are applied at all times or in the situations indicated by their Rules.
Ability Profile
Abilities allow performing a wide range of effects.
- Inspire Cost Value - the amount of Inspire Tokens that have to be spent to use the ability.
Dice Mechanics
Attack Roll
When a unit attacks, you need to determine the number of HITS. Roll the number of attack dice indicated by the dice icon in the attack's profile. Each die has to be changed either to a HIT or a MISS.
- Results with a Skull icon are HITS.
- Results with a Mastery icon are changed to HITS or MISSES depending on the unit's mastery statistics. Melee attacks use a Melee Mastery Statistic, ranged attacks use Ranged Mastery Statistic, and magic attacks use an Arcane Mastery Statistic.
- If a unit's Mastery Statistic is 3 or lower - change all Mastery results to MISSES.
- If a unit's Mastery Statistic is 4 - change one Mastery result to a HIT, and the rest to MISSES.
- If a unit's Mastery Statistic is 5 or higher - change all Mastery results to HITS.
- Results with an Inspire icon are changed to HITS or MISSES depending on the unit's inspiration. If, after the roll, a unit has and decides to spend a single Inspire Token, all Inspire results are changed to HITS. Otherwise they are changed to MISSES.
- Blank results are MISSES.
Attack Roll Example
A unit performs an attack action using the Vicious Strike attack from its unit card. This is a melee attack that uses 6 attack dice, each can deal 1 damage.
The player rolls 6 attack dice. The result is 1 HIT, 2 INSPIRE and 3 MASTERY.
- The attacking unit's Melee Mastery Statistic is 3. This is not enough to change any MASTERY result to a HIT. They are changed into MISSES instead.
- If the attacking unit has an inspire token available, it can spend it to change all INSPIRE results into HITS.
- If the attacking unit doesn't have any inspire tokens available or chooses not to spend it, the INSPIRE results are changed to MISSES.
Note: the example's rule notes on the printed page read: if the attacking unit's Melee Mastery Statistic was 4, the player could change one MASTERY result into a HIT; if it was 5, the player could change ALL MASTERY results into HITS.
Defense Roll
After the number of HITS is determined, the defending unit can reduce it with SAVES. Roll a defense die for each HIT. Each die has to be changed either to a SAVE or a FAIL.
- Results with a Deflect icon are SAVES.
- Results with an Armour icon are changed to SAVES or FAILS depending on the defending unit's armour. The value of the Armour Statistic indicates how many Armour results are changed to SAVES.
- If a unit has 0 Armour - change all Armour results to FAILS.
- If a unit has 1 Armour - change one Armour result to a SAVE, and the rest to FAILS.
- If a unit has 2 Armour - change two Armour results to SAVES, and the rest to FAILS.
- If a unit has X Armour - change X Armour results to SAVES, and the rest to FAILS.
- Results with an Inspire icon are changed to SAVES or FAILS depending on the unit's inspiration. If, after the roll, a unit has and decides to spend a single Inspire Token, all Inspire results are changed to SAVES. Otherwise they are changed to FAILS.
- Blank results are FAILS.
Defense Roll Example
Let's assume the attacking unit made 6 HITS. The defending player makes a defense roll with 6 dice. The results are 1 DEFLECT, 2 INSPIRATION and 3 SHIELD.
- The defending unit has an Armor Statistic value of 0. It can't change any SHIELD results into SAVES. They are changed into FAILS instead.
- If the defending unit has an inspire token available, it can spend it to change the INSPIRE results into SAVES.
- If the defending unit doesn't have any inspire token available, or chooses not to spend it, the INSPIRE results are changed into FAILS.
Note: the example's rule notes on the printed page read: if the defending unit's Armor Statistic was 1, the player could change one SHIELD result into a SAVE; if it was 3, the player could change all 3 SHIELD results into SAVES.
Dealing Damage
After the rolls, for each HIT that was not SAVED, the defending unit receives an amount of damage indicated by the damage icon in the attack's profile. Place the Damage Tokens on the defending unit. If the amount of Damage Tokens is equal or exceeds the unit's HP, it is destroyed.
Unit's Turn
When a player activates a unit, the unit's turn begins and it can perform up to 2 actions. Some actions may cause a unit to perform additional actions (gain actions). Effortless actions do not count towards the 2 actions a unit can perform. A unit does not have to use up all available actions. A player can pass a unit's turn before it performs all disposable actions and any remaining actions are lost. Some effects may change the number of actions a unit can perform in a turn.
Actions
List of all actions available to a unit.
Actions that can be performed ANY NUMBER OF TIMES per turn:
- Move Action - used to change a unit's position or enter combat.
- Attack Action - used to deal damage to enemies.
- Ability Action - used to perform a wide variety of effects.
Actions that can be performed ONLY ONCE per turn:
- Charge Action - used to move up to an enemy and attack them.
- Magic Action - used to cast a wide variety of spells.
- Flee Action - used to back out of combat.
- Battle Preparation Action - used to gain an extra Inspire Token.
Combat
When bases of two non-allied units are adjacent (touching each other), the units are in combat. A unit can be in combat with multiple units at the same time.
When in combat:
- a unit can perform melee attacks against units in combat with it.
Placing in Combat
A unit may be surrounded by other units or terrain in a way that makes it impossible to place another unit in combat with it. If there is not enough space for another unit's base to become physically adjacent to the unit without moving any other model, then another unit is not allowed to enter combat with it.
A1 is in combat with B2 and B3; A2 is in combat with B2; B1 is not in combat with anyone; B2 is in combat with A1 and A2; B3 is in combat with A1.
Combat Restrictions
A unit in combat cannot:
- use a move action,
- move as a result of personal and allied skills with 'move',
- continue movement, if it has entered combat during movement,
- use a charge action,
- use a ranged attack action,
- cast spells that are ranged attacks.
A1 wants to charge B1, but cannot because A2, B2 and terrain are blocking the space around B1. A successful charge would require A1 to be in base to base contact with B1.
Move Action
Move Action Rules
Using a move action allows changing a unit's position on the battlefield. After using a move action, a unit is allowed to move the number of inches equal to the unit's Movement Statistic.
Move Rules
When a unit moves, it has to follow the following rules.
- A unit does not have to move the entire distance available to it.
- A unit does not have to move in a straight line, it can choose any path.
- A unit cannot move through or finish its move on other units and impassable terrain.
- A unit cannot move when it is in combat.
When measuring movement, start from the front of the model. You cannot move further than this unit's Movement Statistic.
A1 can move 5". It cannot be moved to B1, because it cannot move through other models (friend or foe). It can choose to move to B2.
Skills with 'Move'
Using a move action is not the only way to move a unit. Units can also move or be moved as a result of skills with a 'move' keyword. Those skills will always state the move's distance.
When a unit is in combat, it cannot move as a result of personal and allied skills with 'move' but even if it is in combat it can be moved as a result of enemy skills with 'move'.
Special 'Move' Types
In some skills, 'move' is replaced by a special type. Special types follow all the Move Rules with certain rule modifications.
- Fly
- The unit can fly over other units and impassable terrain.
- The unit cannot enter combat as a result of flying.
- After flying, all charges performed by the unit are 'very hard' until the end of turn.
- Blink
- Remove the unit from the battlefield and place it fully within the blink's range.
- The unit can leave and enter combat with blink.
- Can be used when the unit is Immobilized.
- Jump
- The unit has to move in a straight line.
- The unit can jump over other units and impassable terrain.
- The unit cannot enter combat as a result of jumping.
- After jumping, all 'easy' charges performed by the unit are 'hard' until the end of turn.
- Push
- Can only be used against another unit.
- The unit is moved the entire push's distance.
- Draw a virtual line between the centers of the bases of the pushing and the pushed unit.
- Move the unit in the direction that is an extension of that line, away from the pushing unit.
- If there is another unit or impassable terrain on the unit's path, the unit stops the move adjacent to it (in combat if it is an enemy unit) and receives a Stun Token. Stun is applied even if the unit is pushed onto an enemy it was already in combat with.
A1 uses its actions to attack B1 and B2 with an attack that has Push 3". After dealing damage, the players draw the lines which go through the centers of the models and both B1 and B2 are moved. B1 is moved full distance 3". B2 stops its move next to the impassable terrain and receives a Stun Token.
A1 uses an ability that allows it to Push 2" an enemy model which is within 3" range. The players draw the line which goes through the centers of the models and move B1. B1 stops its move when it touches A2 and receives a Stun Token.
Charge Action
Charge Action Rules
Charging allows a unit to move and attack in a single action. Using a charge action:
- Choose a visible target.
- Determine the charge test's value.
- Determine the charge's type.
- Perform a charge test.
- If the test is passed, move your unit into combat with the target.
- Perform a melee attack.
Charge Test's Value
The charge test's value is the distance between the charging and charged unit. Measure the shortest line between their bases.
Charge Type
- Easy charge. This is performed when the charging unit can move in a straight, unobstructed line into contact with any point of the charged unit base with no other unit or terrain on the path.
A1 can draw a straight, unobstructed line to B2 - it will perform an Easy Charge Test.
Even though B1 is mostly behind terrain, A1 can move in a straight, unobstructed line to get into contact. A1 will perform an Easy Charge Test. The Charge Test's value is equal to the shortest distance between the two models' bases (the violet line).
- Hard charge. This is performed when the straight path to the charged unit is obstructed by another unit or terrain.
A1 cannot move in a straight, unobstructed line to B1 (it is obstructed by the forest). A1 will have to perform a Hard Charge Test with a Charge Test value equal to the shortest distance between the models (the violet line).
A1 cannot move in a straight, unobstructed line to B1 (it is obstructed by two other units). A1 will have to perform a Hard Charge Test with a Charge Test value equal to the shortest distance between the two models (the violet line).
- Very hard charge. This is performed when an effect specifically states that the charge is very hard.
Charge Test
Easy Charge Test
- Roll 2D6. Choose the higher result. Add the result to your unit's Movement Statistic.
- If the sum is equal or higher than the charge's difficulty, the test is passed.
- If you roll two "1" results or if the sum is lower than the charge's difficulty, the test fails.
Hard Charge Test
- Roll 2D6. Choose the lower result. Add the result to your unit's Movement Statistic. If the sum is equal or higher than the charge's difficulty, the test is passed.
- If you roll any "1" result or if the sum is lower than the charge's difficulty, the test fails.
Very Hard Charge Test
- The same as the hard charge test, but if you roll any "1" or "2" result, the test fails.
Charge Result
Successful charge
If the charge test is passed:
- Move the charging unit into combat with the charged unit into the closest unoccupied space. You can move through other units.
- Perform any number of "effortless" abilities.
- Perform a melee attack against the charge's target.
Failed charge
If a charge test is failed:
- Move the charging unit in a straight line towards the charged unit (violet line) by the number of inches indicated by the lowest result of the dice rolled in the charge test. If there is impassable terrain or another unit (even the charge's target!) on that move's path, the unit stops 1/16" in front of it.
- The unit continues its turn but the charge action's once per turn limit is used up.
A1 has passed the easy charge test and can now choose to move to combat with B1 in any way that leads to B1 in a straight unobstructed line.
Placing a Unit in Combat
After a successful easy charge, the charging unit can be placed in combat with the target in any position that leads to contact with the enemy base as a result of a straight unobstructed move.
After a successful hard and very hard charge, the charging unit is placed in combat with the target in the closest unoccupied space.
Charge's Range
Charge's target can be any visible enemy in a charge's range. The charge's range is a maximal possible distance the charging unit can travel in a charge. Typically, the charge's range is equal to the unit's Movement + 6 (the highest die result in the charge test). Some effects may increase the charge's range (i.e. a passive ability that adds +2 to a charge test result).
Charge Always Fails on "1"
If the die chosen in a charge test is a "1" result, the charge always fails. Irrespective of any bonuses to the charge test or result increasing effects.
A1 has passed the hard charge test and has to now be placed in combat with B1. The closest unoccupied space is located in the place highlighted in the picture with a green colour. The red highlighted space is further so the unit cannot be placed there.
Attack Action
Using an Attack Action
- Choose an attack profile from the unit's card.
- Choose the attack's target.
- Pay the attack's Inspire Cost (if any).
- Perform an attack roll.
- Perform a defense roll.
- Deal damage.
Basic Attack
Every unit in Bloodfields has the basic attack. This attack is not printed on unit cards but is always available.
Melee Attack Rules
Melee attacks can only target enemies that are in combat with the attacker. Melee attacks use the Melee Mastery Statistic when changing Mastery results to HITS.
Attack Keywords
In the attack profiles there are attack rules. Some rules are concentrated into keywords.
- Critical Strike - dice rolls or rerolls with a skull result (not dice changed to skulls!) deal automatic damage and the enemy does not perform a defense roll against them. The enemy still performs a defense roll for the remaining HITS generated by this attack.
- Armour Penetration - the enemy cannot change any armour results to SAVES with the use of their Armour Statistic.
- Ignore X Armour - the enemy's Armour is reduced by X for the attack.
- Apply Stun/Blind/Weakness/etc. - places a condition token on the enemy.
- Lifesteal - restores 1 HP for each damage token the attack puts on the enemy unit(s) (you cannot place more damage tokens than the enemy's remaining HP).
Ranged Attack Rules
Ranged attacks can only be used when the unit is not in combat and they can only target visible enemies that are in the attack's range. Ranged attacks use the Ranged Mastery Statistic when determining if the Mastery results are HITS.
Check the "Unit Card" section for Ranged Attacks and Melee Attacks to properly identify them.
Attack Roll, Defense Roll, Dealing Damage
Check the "Dice Mechanics" section to properly resolve an attack. After a player rolls a die or dice, their enemy can first perform any reroll or dice modifying effects. After the enemy finishes, the player who rolled the dice can perform any reroll or dice modifying effects of their own. Once the player who rolled the dice finishes, the enemy can no longer modify or reroll any of those dice.
Friendly Fire Risk
Ranged attacks can be performed against enemies in combat with your allies. However, for each die rolled or rerolled into a blank result (but not the dice changed to blanks!) in the attack roll, all allies of the attacking unit in combat with the ranged attack's target receive 1 damage. Allies damaged this way are not affected by the effects of "On damage" keyword.
- Ignore Cover - prevents the enemy from gaining the defensive bonus from being in cover.
- Attack Twice - allows you to perform the attack twice (or more in some cases); different targets can be chosen for each attack. The attacker may spend Inspire Tokens for each roll individually. Any bonuses that apply to the attack are applied to each roll.
- Seeking Attack - allows you to choose an enemy that is not visible to the attacker, and attack them.
- Before the attack - applies the following effect before the attack roll.
- After the attack - applies the following effect after the attack is resolved, no matter if it dealt any damage.
- On damage - applies the following effect after the attack is resolved, only if it dealt damage.
- At half range - applies the following effect if the target is within half of the range (including bonuses) of the attack.
- Reach - allows a unit to melee attack an enemy at reach's range, even if it is not in combat with that enemy.
- +1 die - the attack is rolled with an additional attack die.
- +1 dmg - the attack deals an additional damage for every unsaved hit.
- Aoe - allows a unit to melee attack all enemies in Aoe (Area of effect) range, even if it is not in combat with any of them, in an order chosen by the attacker, each with a separate attack and defense roll. The attacker may spend Inspire Tokens for each roll individually.
B1 makes a ranged attack and targets A1, which is in combat with B2 and B3. 3 Attack dice were rolled - two blanks and a hit.
Abilities and Passives
Abilities and passive abilities allow units to apply a wide variety of effects like attack boosts, defense boosts, mobility improvements, tricks, passive effects, triggered effects, and more. Rules of abilities may require understanding rules of all other actions and may override their existing rules.
Using Abilities
In order to use an ability, a unit has to pay its Inspire Cost (if any). Afterwards, resolve the ability's rules. Using an ability is an action unless the ability has an "Effortless" indicator.
Effortless abilities
Abilities with an "Effortless" indicator (lightning icon) do not reduce the number of actions remaining to perform by a unit in a turn. You can use any number of effortless abilities in a turn. Effortless abilities can only be used during the turn of a unit that is using them.
- Frenzy (effortless) - Gain +1 Melee Mastery, -1 Movement, and +1 die for all attacks until the end of turn.
Using Passive Abilities
Each unit has a main passive ability and any number of additional passives. Passive abilities can be static, in which case they are applied all the time without having to activate them. Passive abilities can also be triggered, in which case they only apply when a certain condition occurs. Triggered passives may leave the unit with a decision whether to use the passive or not.
- Anger - When Kaiser is not in combat and he receives damage from an enemy, Kaiser must move full 3" in a straight line towards that enemy.
- Heavy Impact - After a successful charge, Ursarin has +1 die in all attacks until end of turn.
Example abilities
- Double Shot - Gain two "Elven Bow" attack actions with -1 Ranged Mastery.
- Explosive Core - When this unit is destroyed, all units in 3" receive 2 hits.
Magic Action
The Magic action allows a unit to cast spells. The Magic action can only be used by Mages (units with "Mage" or "Archmage" trait).
- After using a Magic Action, a "Mage" unit is allowed to cast 2 spells and an "Archmage" is allowed to cast 3 spells in a single action.
- All spells, both cast successfully and unsuccessfully, count towards the limit.
- After a unit exhausts its spell limit or decides to not cast any more spells, the magic action ends and the unit continues its turn.
Casting Restrictions
- Mages can only cast spells indicated on their unit cards with a blue color and spells from their School of Magic (see that section for more information).
- Mages can only cast each spell once per magic action (no matter if it was cast successfully or unsuccessfully).
- Spells do not have an Inspire Cost. Instead, each spell has a Spell Difficulty. Every time a unit attempts to cast a spell, it has to pass a Magic Test.
Magic Test
Choose a spell and roll 2D6. Choose the higher result. Add the result to the unit's Arcane Mastery Statistic. If the sum is equal or higher than the spell's difficulty, the test is passed.
If the test is passed, follow the rules in the spell's profile. If the test is failed, nothing happens. If the spell limit was not exhausted, the caster can attempt casting the next spell.
Magic Test - Critical Results
- Mana Burn - If two "1" results are rolled in a Magic Test, the test instantly fails. The dice cannot be re-rolled or changed through any effects, and the caster loses 1 HP.
- Mana Focus - If two "6" results are rolled in a Magic Test the caster gains 1 Inspire Token.
Spells
After the Magic Test of a spell is passed, resolve the rules stated in its profile.
Receiving "Hits"
Some abilities can deal damage by causing units to receive Hits. When a unit receives a number of Hits, that unit rolls a Defense Die for each. The defending unit may change the results the same way as in a defense roll (use armour and inspire tokens to change results to saves) and receives 1 damage for each unsaved hit. When receiving Hits, cover does not apply.
Magic Attacks
Some spells are attacks. Magic attacks have the damage icon and the die icon in their profile. When the magic attack spell is successfully cast during a magic action, perform it right away in the same manner as a regular attack. No matter if the magic attack is melee or ranged, all magic attacks use the Arcane Mastery Statistic when determining if the Mastery results are HITS.
Battle Focus Action
A unit can use a preparation action to gain 1 Inspire Token. A battle focus action can be used once per unit's turn.
Extra Actions
Gaining Actions
A unit can gain additional actions to perform during its turn as a result of some effects. A unit can gain an action (in which case it chooses which action to use), a specific action (i.e. a move action, or an attack action), or a named action (i.e. 'Backstab' attack action, which is a skill printed on the unit card).
Examples of gaining actions, as printed on the page:
-
Command - Another target ally in 8" gains an attack action.
-
Killing Spree - After destroying an enemy, gain an action.
-
Quickshot - Gain a ranged attack action against an enemy in 4".
-
The gained action has to be performed right away and it cannot be stored for later in the turn.
-
A unit has to pay the Inspire Cost of the action (if any).
-
If a unit cannot or does not want to perform the gained action, the action is lost.
-
If the unit gains a specific action (i.e. charge) or a named action (i.e. 'Backstab'), using the action does not exhaust the once per turn limit or a "Unique" rule limit of the action. As a result, that action can be used an additional time in the same turn (before or after the action was gained).
Receiving Actions from Other Units
A unit can gain and perform actions outside of its turn as a result of some effects. The received action follows the same rules as the gained action. Additionally, the effect will always specifically state which action is received, and the unit can only perform that action, not any other actions, unless they are gained as a result of performing the received action.
Performing Actions in Other Units' Turns
The action received from another unit is performed in that unit's turn.
- Gaining an action from another unit does not begin the activation (turn) of the unit that received the action. It is performed in the activation (turn) of the unit that gave the action.
- The once per turn limit of some actions and skills (ie. charge action, an attack with a "Unique" indicator) applies separately to every individual turn, therefore by performing them in other units' turns, it allows them to be used additional times in a round.
- "Until end of turn" effects last until the end of the turn in which the action was given.
- "Effortless" ability actions cannot be used in other units' turns.
- After the received action is performed, continue the turn of the unit that gave the action.
Flee Action
When a unit is in combat, it cannot move. In order to leave combat, a unit has to use a Flee Action.
Using a Flee Action
- The Flee action can only be used when a unit is in combat.
- The Flee action can only be used as the first action in a unit's turn.
- After using a Flee action, the unit has to pass a Morale Test (10).
- The test's difficulty is increased by 1 for each enemy in combat with the unit except the first one.
- If the test is passed, the unit can move up to the number of inches indicated by its Move Statistic, and then continue its turn.
- After fleeing, the unit cannot charge in the same turn.
- During this move, a unit can move through the unit(s) it was in combat with.
- In this move, the unit has to leave the combat and cannot enter combat with another unit. If there is no space to place the unit that meets those conditions, the flee action cannot be used.
- If the test is failed, the unit's turn ends.
Morale Test
A Morale test is performed in a flee action and as a result of various effects that require a unit to pass a Morale Test. Every Morale Test has a numeric indicator of its difficulty.
In order to perform a morale test, roll 2D6. Choose a higher result. Add the result to the unit's Morale Statistics. If the sum is equal or higher than the test's difficulty, the test is passed. If you roll two "1" results or if the sum is lower than the test's difficulty, the test fails.
Some abilities may require performing morale tests.
- Nightmare - Target enemy in 4" has to pass a Morale Test (10) or loses 1 HP.
Visibility and Targeting
Targeting
Performing most actions requires targeting a unit. A unit can only target another unit, if the other unit is visible to them. When a skill instructs a unit to target an ally, the unit can target itself. When a skill instructs to target another ally, the unit cannot choose itself as the target.
Cover
When a unit is using a ranged attack against a visible enemy, the defending unit has cover when:
- a line of sight to the defending unit cannot be drawn without it going through passable terrain,
- the defending unit's allies with bases larger than the defending unit provide cover in the same manner as passable terrain,
- the defending unit is in combat,
- the defending unit has cover as a result of skills or is standing in certain types of terrain (check terrain section).
Visibility
In order for a unit to be visible to another unit, it must be possible to draw a straight unobstructed line ("line of sight") from any point on one unit's base to any point on another unit's base. The line of sight is obstructed by impassable terrain. Other units and passable terrain do not obstruct the line of sight.
- B1 is fully visible to A1, as A1 can draw a straight unobstructed line ("line of sight") to B1's base.
- A1 can draw a line of sight to B1 but there is no way to draw it without going through a bigger model (B2), so B1 has cover.
- B1 is not visible to A1, as A1's line of sight is fully blocked by impassable terrain.
- B1 has cover because A1 cannot draw a line of sight to B1 without it going through a passable terrain.
- A1 can draw a line of sight to B1. B1 is visible because the passable terrain and other units do not obstruct the line of sight.
- B1 does NOT have cover. B1 is standing behind a bigger model (B2), but A1 can draw a straight unobstructed line of sight to it.
A unit that has cover can change all Inspire results to SAVES without spending an Inspire Token.
Targeting Exception
Some skills affect units without targeting them. Those skills also do not require visibility of the units.
- "Choose" - When a skill instructs you to "choose" a unit in a range.
- "All" - When a skill applies to "all" units in a range.
Legal Targets
A legal target is a unit that meets all requirements given by a skill or action (its maximal range, visibility, type, etc.). Even though B1 is behind the forest, A1 can still draw a straight unobstructed line of sight to it. B1 does NOT have cover.
Terrain
The game is played on a 30" x 45" playing area. When setting up a game in-house, arrange the terrains on the battlefield in a way that is accepted by both players. We suggest that the terrain models should take up a quarter of the playing area before they are spread out. If the players are unable to agree on the terrain arrangement, put all terrain aside and have each player place one terrain piece on the battlefield alternately until they run out of terrain. Terrain models cannot be placed closer than 3" from each other and from the edge of the battlefield.
For competitive play, the placement of terrain is fixed and determined by the event organizer.
Impassable Terrain
The impassable terrain sets the barriers that the units cannot cross with regular movement. Units can never finish movement on the impassable terrain.
- Rocks - Although rocks have irregular height, they obstruct the line of sight along their contour.
- Buildings - Houses come in two height versions - with just a ground floor or with 2 floors.
Passable Terrain
Units can move through and finish movement on passable terrain. When a unit is standing on a passable terrain with any part of its base it is considered to be in the terrain and follows the special terrain rules.
- Forest
- When a unit is in a forest, it has cover.
- When a unit is in a forest, all "easy" charges against it are "hard".
- When a unit begins its turn in a forest, roll D6. On "1" result, that unit cannot use a charge action this turn.
- Units cannot fly in and out of the forest.
- The tree models are separable from the terrain, when a unit finishes movement on them, remove them from the model.
- Swamp
- When a unit is in a swamp, it has cover.
- When a unit is in a swamp, all "easy" charges against it are "hard".
- When a unit begins its turn in a swamp, roll D6. On "1" result, that unit cannot move and charge until the end of its turn (it can still blink).
- Ruins
- When a unit is in ruins, it has cover.
- When a unit is in ruins, all charges against it are "very hard".
- When a unit charges across the ruins, the charge is "very hard".
- When a unit moves across the ruins, roll a D6. On "1" result, that unit loses 1 HP.
- When a unit begins its turn in ruins, roll a D6. On "1" result, that unit loses 1 HP.
- Each unit rolls D6 only once per turn per each ruin they move through.
- Units can move through protruding elements of ruins but cannot finish movement on them. If a unit does not have enough movement to move across those elements with their entire base, the unit stops movement in front of them. The elements do not block vision.
Ranged Attacks and Charging in Terrain
When a unit is in a passable terrain that grants cover and it uses a ranged attack, that terrain does not obstruct the line of sight for the purposes of cover. However, if the target is in the same passable terrain, the target will have cover due to it being in a terrain.
When a unit is in a passable terrain other than "High Ground" and it charges out of it, that terrain obstructs the charge's path for the purpose of determining the charge's type.
- High Ground
- High Ground does not grant cover, even if the line of sight goes through it.
- High Ground does not affect the charge type when the charge's path goes through it.
- When a unit in high ground uses a ranged attack against a unit that is not in high ground, the attack has "reroll any number of dice".
- When a unit in high ground uses a charge action against a unit that is not in high ground, it may reroll the charge test.
Tokens
Damage
Place the damage tokens on units that lose HP. Once the number of damage tokens is equal to the unit's HP Statistic, the unit is destroyed and removed from the battlefield. When a unit restores HP, remove that many damage tokens from the unit.
Inspiration
Distribute the Inspiration Tokens (INS) to units at the beginning of each round. Inspiration Tokens can be spent to pay the Inspire Cost of attacks and abilities and to improve the attack and defense rolls by changing Inspire Results to Hits or Saves. At the end of round, remove all Inspire Tokens from units.
Shields
When a unit receives a shield, place a Shield Token on it. When a unit with a Shield Token takes damage, you must discard a shield token for each damage, instead of placing damage tokens on it. At the end of each round, remove all shields except from 1 from each unit.
When a unit is caused to "lose HP" (instead of "receive damage"), it cannot discard Shields to prevent it.
Effects of attacks with "On damage:" keyword are not applied if the entire damage was prevented.
Other Tokens
Some armies and individual units have their own dedicated tokens. Rules for those tokens can be found in the army descriptions and on the unit's cards. Those tokens are not condition tokens, unless stated otherwise.
Condition Tokens
-
Non-stackable - a unit cannot have more than one non-stackable token with the same name. Do not place additional tokens with the same name on the unit when it already has one.
-
Status - as long as a unit has a token with a status effect, apply the status' effect to the unit. At the beginning of a unit's turn remove all tokens with status from a unit. When a status is removed this way, the status' effect keeps applying to the unit until the end of its turn. Status effects from the tokens with the same name do not stack.
-
Blind Token - Non-stackable. Status effect: When the blinded unit performs an attack roll (melee, ranged, or magic), it deals 1 damage to itself for each blank result.
-
Immobilize Token - Non-stackable. Status effect: A unit cannot charge. Its Move Statistic and skill effects that allow it to "Move" are reduced by 1 (if it is on Large Base), by 2 (if it is on a Medium Base), and by 3 (if on a Small Base). The unit cannot move as a result of effects with "Fly" and "Jump".
-
Silence Token - Non-stackable. Status effect: A unit cannot use the magic action. All unit's abilities have +1 Inspire Cost.
-
Weakness Token - Non-stackable. Status effect: A unit has -2 Melee Mastery, -2 Ranged Mastery, and -2 Magic Mastery.
-
Spotted Token - Non-stackable. As long as a unit has this token, all ranged attacks against it have 'Ignore Cover' keyword and the effects of ranged attacks with 'At half range:' keyword are applied to it even if they are performed from over the half range. Remove this token at the end of a round.
Traits and Bonuses
Each unit has a number of Traits.
Race Trait
The first trait on each unit card is their Race Trait. The Race Trait gives a unit additional rules.
Loyalty Bonus
When all units in the roster are from the same army, the units receive an additional bonus that is different for each army. Adding Mercenaries to your roster does not prevent you from gaining the Loyalty Bonus.
Secondary Trait
The following traits on the unit cards are their secondary traits. Some secondary traits don't provide units with any bonuses but can be utilized as requirements for some items or skill effects. Below you will find the list of secondary traits with additional rules:
- Mage - this unit can use the magic action and cast 2 spells in it.
- Archmage - this unit can use the magic action and cast 3 spells in it.
- Warmachine - this unit has no defense roll against melee attacks, it cannot use the charge action and flee action, it cannot use items.
- Support - support units can be added to a roster in multiple copies (up to 4). Each support unit has a separate HP pool, its own Inspire Tokens, and does not have to be located close to other support units on the battlefield.
- The difference between support units and regular units is that they all perform their turn in a single activation. Once a player activates their supports, he or she takes actions, one by one, with all their support units. Only after all support units perform all their actions, the other player can proceed with their activation. Likewise, during the deployment, all the support units are deployed together at the same time in a single deployment.
- Some additional support units can be deployed during the game with certain skills. Those units will be able to perform their actions starting with the next support unit activation (even if they are deployed during a support activation). In each round, a player gets to perform only one support unit activation and needs to control at least one support unit in order to do it. Destroying a deployed unit grants Victory Points in the same manner as destroying other units.
- Units can only deploy supports in spaces visible to them and fully in a skill's range. Supports cannot be deployed into combat. If an effect would cause a support to be deployed into combat, place it 1/16 of an inch next to the enemy. If a support is deployed upon another unit's death, deploy the support adjacent to it before removing it from the battlefield. If there is no legal space to deploy a support, it does not enter the battlefield.
- Support units generate 1 Inspire Token in total at the beginning of the round no matter how many support units are controlled by a player (not 1 for each support unit).
Gameplay Rules
Rules Priority
- Rules from unit cards have priority over the rules from this rulebook.
- If two effects from the unit cards contradict each other, you will be able to find the effect's priority in the card's FAQ on bloodfields.net. Feel free to reach out to us for answers in any of those situations so the FAQ can be updated for all players.
Measuring
- Players are allowed to measure all distances on the battlefield at all times.
- The distance between units for purposes of game effects is measured between their bases.
Effects' Order
When two or more effects trigger at the same time, the player whose turn it is currently, chooses the order in which they are resolved. If it is neither player's turn (i.e. at the beginning or the end of round), the player with the Initiative Token chooses the order.
Units' Bases
Some models may have parts that are protruding over the edges of their base. For all purposes like placing units in combat, moving, establishing charge difficulty, visibility, and cover consider only the bases of the units. Treat the protruding parts as if they were not there. In some situations, replacing a unit with an empty base may be required to properly place it on the battlefield.
Edges of the Battlefield
Edges of the battlefield are impassable terrain.
Attacks with Variable Dice and Damage
Some attacks have a number of attack dice and damage dealt that changes each time the attack is used. If an attack has a variable number of attack dice, roll the indicated die before each attack, to determine the number of attack dice to use. If an attack has a variable damage number, roll the indicated die for each unsaved hit to determine the amount of damage dealt to the enemy.
'D3' is a derivation of a 'three-sided die'. In order to roll a D3, roll a D6 and divide the result by 2 rounding up.
Reroll and Dice Modification Order
When a player rolls any dice, first, the opponent may use any reroll or dice modifying effects available to them. Afterwards, the player who rolled the dice may do the same. Once the player does or passes doing so, the enemy player can no longer use any effects that affect the dice's results.
Warmachines
Units with "warmachine" trait bring specialized force to the battlefield.
Ballistic Profile
Some attacks have a ballistic profile. These contain information about their attack modificators used in the Scatter Test that can be different depending on the distance to the attack's target.
Example banner, Stone Cluster Artillery Shot (Inspire Cost 0; 2 attack dice; 2 damage): ballistic profile 5"-15" (-1), 15"-30" (0), 30"+ (+1).
Warmachine Shots
Warmachine shots are special attack types that represent the physics of an attack. Those attacks can be found not only on warmachine unit cards but also on some regular units. All Warmachine Shots use the unit's Ranged Mastery to change Inspire Results to Hits in attack rolls.
Artillery Shot
Using Artillery Shot
- Target an enemy that:
- is within the range allowed by the unit's ballistic profile,
- is visible by any allied unit (not necessarily the one performing the Artillery Shot).
- Place a Round Template in any way in which the entire target's base is under it.
- Perform a Scatter Test.
Scatter Test
Roll a Scatter Die:
- HIT - the shot hits directly in the center of the template.
- BLANK - the shot fails and does nothing.
- ARROW & NUMBER - the shot deviates from the original target in the direction indicated by the arrow and by the number of inches indicated by the number. The number is modified by the modificator indicated in the unit's attack profile.
Artillery Shot Damage
ALL units, friendly and enemy, that are in any part under the template are attacked separately, starting with the unit closest to the center of the template. Artillery shot has 'no cover' attack rule. Additionally, artillery shot has an 'armour penetration' attack rule against units that are in any part within the smaller ring of the template.
The catapult has chosen to locate the template over A1. The Scatter Test resulted in the 5" deviation in the direction on the Scatter Die. Instead of attacking A1, the Artillery Shot will attack B2 and B3.
Cannon Shot
Using a Cannon Shot
- Choose a point on the shooting unit's base from which the shot will originate.
- Target a visible point that is within the range allowed by the unit's ballistic profile.
- Perform a Scatter Test.
Scatter Test
Roll a Scatter Die:
- HIT - the shot hits directly at the targeted point.
- BLANK - the shot fails and does nothing.
- ARROW & NUMBER - the point deviates from the original location in the direction indicated by the arrow and by the number of inches indicated by the number. The number is modified by the modificator indicated in the unit's Ballistic Profile.
Cannon Line of Damage
After the targeted point's final location is established, roll 2D6 and sum the results. Then, attack every unit on the Line between the targeted point and 2D6 inches behind the point. The width of the Line is 1/8 inch. The direction of the Line is the continuation of a line between the chosen point on the unit's base and the targeted point. The Line of Damage moves through units but ends if it reaches impassable terrain.
Cannon Damage
All units, friendly and enemy on the Line of Damage are attacked separately, starting with the units closest to the shooter. Cannon shot has an 'armour penetration' attack rule.
The cannon has chosen A1 as the target. The Scatter Test results in 3" deviation in the direction on the Scatter Die. The cannon's Line of Damage will now go through and attack B1.
Array Shot
Using Array Shot
- Place an array template adjacent to the unit using the attack.
- Establish the number of enemy units under the template.
- Roll 2D6, sum the results, add the number of enemy units established in point 2. The sum is the number of attack dice for the array shot.
- Distribute the attack dice among the enemy units, with at least 1 die allocated to each enemy.
- Perform a separate attack roll against each enemy in any order with the number of attack dice chosen in point 4.
For example, a roll of "3" and "4" (sum 7) with 3 enemy units under the template allows the player to distribute 10 dice. A player can attack the first unit with 1 die, the second unit with 3 dice, and the third unit with 6 dice. The player must distribute at least 1 die to each enemy.
Piercing Shot
Using Piercing Shot
- Draw a straight line in any direction originating from any point on the unit's base.
- The line ends at the shot's range or when it reaches impassable terrain.
- Attack every unit on that line separately, starting from the closest.
Targets in cover and in combat
In Piercing Shot, regular rules for cover apply but there is no friendly fire risk (a unit in combat still has cover).
Warmachine Shots in Cover & Combat
In all Warmachine Shots regular rules for cover apply but there is no friendly fire risk (a unit in combat still has cover).
When the template is placed this way, the Array Shot gets +3 dice and has to attack each enemy unit with at least 1 die.
Items
Items and Itemization
When creating a roster on bloodfields.net you can add items to each of your units. Items cost additional blood points. When a unit is destroyed, the enemy also gets the victory points equal to the cost of the items (even if they were already used). The cost of items counts towards the unit's cost for the purpose of Champion Slayer mission. A unit can have 4 items equipped overall and only one copy of the same item.
Mages in the game you have an option to get additional spells from School of Magic items. They can be purchased in the roster creator.
Potions
Potions grant a temporary boost. A unit that possesses a potion may use it during its turn as an effortless action. Once a potion is used, apply its effects to the unit and place a damage token on the potion. That potion cannot be used again.
Only one potion can be used by a unit in its turn.
Charms
Charms allow a unit to apply certain effects. Charms may be used during the unit's turn, on other unit's turn, and in reaction to certain events. Using a charm is not an action. Once a charm is used, place a damage token on it. That charm cannot be used again.
Schools of Magic
Schools of Magic grant a unit access to additional spells. You can learn more about Schools of Magic in the following section.
There are 3 Schools: of Battle, of Protection, and of Grace. Each school excels in a different type of magic. A Mage can buy access to any number of schools. Each School has a list of additional spells that are available to that Mage throughout the game. Those spells are cast and follow the same limitations as if they were printed on the unit's card.
Printable Addendum
On the Library > Resource tab on bloodfields.net, you will find sheets with the printable Bloodfields accessories:
- Tokens
- Terrains
- Artillery Templates
- School of Magic cards
- Rules Reference Sheet