Blackwater Gulch
Blackwater Gulch Rulebook
Table of Contents
Table of Contents
Gangfight Core Rules
Introduction
Gangfight is a small scale skirmish game involving 28-32mm scale miniatures. Gangfight recreates fantastic battles between two competing forces - whether they are marauding raiders looking to bolster their numbers or a ruthless PMC looking for their next pay day. Regardless of which setting you choose to play in, the goal is to defeat your opponents and complete the objectives put before you.
Unlike other miniature wargames, Gangfight is a multi-genre gaming experience where you can choose to play in one of the settings we have created, or you can combine the components of these settings to make your own. In addition to this, Gangfight is "Miniatures Agnostic" - this means you get to customize your force any way you want, using the miniatures you want. Although we have some fantastic partners to whom we promote our players to use, the world really is the limit when it comes to choosing the miniatures you want to represent your force.
Whichever models you decide to use, Gangfight is a strategic game involving a dozen or so miniatures, dice, and a measuring tape - and a great deal of imagination.
Game Summary
Gangfight is typically played where both players control a gang, squad or adventuring party worth a number of "points", which defines how strong your force is. This gives the game balance between the two teams. Models have a cost which represents their abilities and basic power, and everything you need to know to play with them can be found in our separate Gameworld Modules.
Once the two players have agreed on the size of the game, each player makes a list detailing the members of their band. Each player determines what models they will have in their list, but they cannot exceed the predetermined point value.
The battlefield is then put together. A game of Gangfight uses a great deal of terrain in their battles. The location of the battle does not matter, but should be agreed upon by both parties. Typically this will be a place where high action can take place, consisting of loot, possibly even NPCs (such as rogue monsters, or even civilians) - and, of course, mayhem.
Once the table is set, the players start the game by deploying their miniatures and markers on the gaming table. The game is organized through a series of Rounds, and in each Round, each player has their own Turn. During their Turn, each player assigns actions to their troops to activate and play with them, moving them about the table, attacking enemy troops, and accomplishing the scenario objectives.
During the game, the Rounds continue until the End Game conditions are met, which ends the game. Once the game is finished, the players tally their Objective Points and their Victory Points to determine the winner.
Game Terms
Dice Pool: A Dice Pool is a number of dice associated with a particular Attribute in which the player rolls to determine the outcome of their actions. A Dice Pool is an accumulation of their corresponding Attribute, and any bonuses they may have in the form of dice. For example, a model's Attack Pool would consist of their Attack Attribute, and any additional dice the model is granted through equipment or circumstance. Common Dice Pools include Movement, Attack, Marksmanship, Willpower, and Armor Pools.
There are many terms used in these rules that are used regularly enough to need explanation. These are called Game Terms.
Model: A model is a 32mm miniature used to represent one of the members of your band. Models must be mounted on the bases that are supplied with them, either digitally or purchased as a physical model.
Threat: The threat radius represents the additional footprint that a Model can interact with in their environment. Threat is used to determine the distance a Model can consolidate with Fight! action, how far their melee weapons can reach, and how it interacts with opposing Models moving near it.
Standard Action: Actions that can be applied to a single Model that cost a single Action Point (AP).
Special Action: Actions that can be applied to a single Model. These Actions typically confer a particular bonus or special effect.
Party: The group of individual Models that make up your roster. Sometimes also called a Gang or Warband.
Target Number (TN): The value you must roll equal to or above to pass a test on a six-sided dice (d6). The target number may never be reduced below 2 as a natural roll of 1 is always a failure.
Action Points (AP): The resource allocated to each individual Model and to make them perform the various Standard Actions and Special Actions available to them in game. When talking about the Action Points (AP) in the plural, it is referred to as the Action Point Pool.
What You Need to Play Gangfight
You will need the following things to play a game of Gangfight.
- A selection of 28-32mm scale models to represent your party.
- A variety of terrain pieces. Typically you'll need about six large pieces of terrain and about 10 small pieces of terrain.
- A Measuring Tape.
- A 3' x 3' playing area.
- A variety of tokens or polyhedral dice to keep track of Action Points, wounds, and conditions.
- A pencil and a piece of paper to keep track of your roster.
- A dozen six-sided dice.
Basic Rules
These are the basic rules of the game and the foundation on which all of the rules are based upon.
Size and Volume
Each model has a size designation, and each size has a particular volume that must be followed. There are three different sizes a model can be in Gangfight.
Standard Models: Models with this designation are of a common size. The majority of tabletop miniatures are typically of this size. Standard Models have a threat range of 1" around the entire model. They have a volume of 1" x 1.5". and are mounted on any size base smaller than 40mm across.
Large Models: Models with the large designation are extremely potent on the battlefield. They have a threat range of 2" around the entire model. They have a volume of 2" x 3". When Medium sized or smaller models are struck by a Large Model, they cannot drop dice from any Armor Saves they must make from such an Attack. Large Models are typically mounted on a 40mm base, and cannot be more than 60mm across.
Huge Models: This is the largest designation that a model can have. They have a threat range of 3" around the entire model. They have a volume of 3" x 6". When Large or Standard sized models are struck by a Huge Model, they cannot drop dice from any Armor Saves they must make from such an Attack. Huge Models are typically mounted a base that is 60mm or larger.
A model's volume is to determine how much room that model takes up on the battlefield. Typically, the volume of a model is eyeballed by the players and agreed upon, though if it does start to be an issue, a measuring tape can be used to accurately show if the model can be seen, and if models are within their threat range.
Model Size
| Model Size | Base Size | Threat |
|---|---|---|
| Standard | Less Than 40mm | 1" |
| Large | 40mm - 60mm | 2" |
| Huge | Larger than 60mm | 3" |
Distances and Measuring
Measurements may be taken at any time. All measuring must be made from the edge of a model's base.
Threat: Every model generates threat, which is the area in which a model can interact with their environment. When a model is within another model's threat range, the models can interact with one another - such as attack one another in melee, or perform other actions. A model that moves through another model's threat range without stopping, or leaves another model's threat range, provokes a Free Strike, which is an attack that can be made without spending Action Points (AP) against the offending model. As with any distance or measurements in Gangfight, you always measure from the edge of the model's base.
Line of Sight
A model in Gangfight has a 360 degree Line of Sight. They can see all around them, but their vision is blocked by models of equal or greater volume than themselves, and pieces of terrain that are larger than the model. A model that doesn't have Line of Sight to an opponent cannot declare an action against that target.
Profiles & Troops
Each type of model in Gangfight has a statistics block known as their Profile. These Profiles are made up of attributes and various pieces of information relating to the particular model it represents.
There are three types of troops in Gangfight, detailed below.
Heroes: There are individuals that stand out among others in command and battle prowess. These models are known as heroes. Heroes are the most customizable model within your force, and can be equipped with various weapons, armors, or even spells or other special abilities. Being best trained models in your force, they come to the table with three (3) Perks that are selected when purchasing the hero and their equipment.
Veterans: These troops are trained soldiers or fighters that have learned to coordinate their actions and fight as a team. Veteran troops come to the table with two (2) Perks that are selected when purchasing the troop and their equipment.
Recruits: There are all sorts of fighters in the world, and not all of them are professionally trained. Recruits are poorly trained and come to the table with One (1) Perk or skill that is selected when purchasing the troop and their equipment.
Attributes
Each profile consists of 9 attributes. These are values assigned to traits that a model uses to represent their abilities on the battlefield.
Willpower (WP): This value represents a model's ability to withstand fear and emotional punishment. This value is primarily used to generate the Dice Pool to resist psychological effects, resist fear, and rallying after a particularly devastating assault. It is also commonly used to make and resist certain types of attacks. A Dice Pool associated with this Attribute is known as your Will Pool.
Movement (MOV): This value represents how far a model can move on the battlefield in inches. This attribute is used in tests involving running, climbing, and jumping. A Dice Pool associated with this Attribute is known as your Movement Pool.
Armor (ARM): This value represents a model's ability to withstand physical damage. This attribute is primarily used to generate the Dice Pool to resist damage after an attack. Any unsaved damage is applied to the defending model's Endurance Value. A Dice Pool associated with this Attribute is known as your Armor Pool.
Attack (ATT): This value represents how well a model performs in close combat with a melee weapon. This attribute is primarily used to generate the Dice Pool for close combat tests against an opposing Model. A Dice Pool associated with this Attribute is known as your Attack Pool.
Marksmanship (MRK): This value represents a model's hand-eye coordination, particularly when making ranged attacks. This attribute is primarily used to generate the Dice Pool for ranged combat tests against an opposing Model. A Dice Pool associated with this Attribute is known as your Marksmanship Pool.
Endurance (EN): This value is how much punishment a model can withstand before succumbing to an incapacitated state. This attribute is reduced each time a model takes damage. When this attribute reaches 0 or less, the model is considered incapacitated, removed from the tabletop and replaced with an incapacitation token. A Dice Pool associated with this Attribute is known as your Endurance Pool.
Defense (DEF): This value represents a model's ability to defend themselves against being struck by an opposing Model. This attribute is primarily used to generate the Target Number (TN) when an opposing model rolls dice from their Combat Pool.
Damage (DAM): This value represents how much damage a model inflicts upon a successful melee attack. This attribute is primarily used to generate the base Target Number (TN) when an opposing model is making an Armor Check.
Initiative Value (IV): This value represents how fast your model can act in a combat situation. A model's Initiative Value is primarily used as the base for determining how many Action Points a model allocated to spend turning their turn. A Dice Pool associated with this Attribute is known as your Initiative Pool.
Sample Race Attributes (Human)
| Profile | MOV | ATT | MRK | DEF | IV | WP | ARM | EN | DAM | COST |
|---|---|---|---|---|---|---|---|---|---|---|
| Recruit | 4 | 3 | 3 | 4 | 3 | 3 | 3 | 3 | 4 | 35 |
| Veteran | 4 | 3 | 3 | 4 | 3 | 4 | 3 | 4 | 4 |
Rolling Dice
Gangfight uses six-sided dice (d6). Each model has a set of attributes that have a number assigned to them which typically represents the number of dice you roll when taking actions. Dice that match or beat the assigned Target Number (TN) are considered successes. The more successes a model has, the more skillfully that model completed the task attempted. Target Numbers are typically assigned (through the difficulty of the task) or are compared to an opposing model's profile. There are three types of rolls to be made in Gangfight - Skill Tests, Standard Tests, and Opposed Tests.
Dropping Dice: When making a test, sometimes you may be willing to reduce your Dice Pool to better attempt to succeed. If you have more than one die in your Dice Pool, you may drop dice by removing them from the Dice Pool, to lower the Target Number (TN). For each die dropped, the Target Number (TN) of the task is reduced by 1.
Skill Tests: When one attempts a skill test, they are attempting to complete a task that has an assigned difficulty - for example, charging. When this test is done, the appropriate chart is consulted and rolled against. For each die successful, there is typically a bonus associated with that test. Sometimes, only one success is needed to pass. These rolls only affect the model making the test, and do not involve other models.
For example: A model with an Attack Value of 5 is attempting to strike another model who has a Defense Value of 7. As they cannot roll equal to or above 7 they must lower the Target Number (TN). They must reduce their Dice Pool by at least one die to lower the Target Number to 6, which will leave them with 4 dice to roll against the new Target Number (TN). If they were to reduce their Dice Pool by another 2 dice this would lower the Target Number (TN) to 4 with 2 dice left in their Dice Pool.
Standard Tests: These are the most common tests that a model will make during the game. To perform a standard test, a model rolls the applicable attribute's worth of dice, and attempts to match or beat a target number, which is determined by an opposing model. An example of this is combat, where a model rolls their Attack or Ranged Dice Pools against a model's Defense attribute. Each die that is equal or higher than an opponent's assigned attribute is considered a single success.
Opposed Tests: When a model is attempting to overpower another model, an opposed test is needed to determine the result. When an opposed test is declared, both parties roll the indicated attributes against a designated target number (typically another attribute of the opposing model). The winner of the test is the one with the most successes. Ties always go in favour towards the Defender of the roll.
Critical Success: When rolling a die, you may achieve a Critical Success. This occurs when you roll a natural "6" on a d6. For every Critical Success you may roll an additional die. If that die scores a success, you count it towards your total successes for that test. Critical Success die may also further generate Critical Success.
It should be noted that if the number you are rolling against is higher than a 6, rolls of 6s are successes, but do not generate extra dice.
For example: Martin rolls 3 dice and gets a 3, 4 and 6. Since the Target Number is 4, he scores 2 successes. Because he rolled a natural 6, he rolls an additional die and gets a 6, this will allow him to roll another additional die where he gets a 5. He adds these two additional successes, giving him a total of 4.
Assembling Your Party
Refer to the Gameworld Module of your choice for all you need to know to create the members of your party. You are able to create your characters totally from scratch, though we recommend downloading the pre-made Character Cards from our website at SkirmishGames.com, or use our online Gangbuilder to jump into the action faster.
Now that the basics are understood, you can begin building your force. Your Party consists of heroes, veterans and recruits - and potentially powerful creatures or pieces of technology that can help you in the upcoming battle. For quick Pickup or competitive Tournament games, it is recommended that your party adds up to a total of 750 points. This point level will give you enough points to outfit your team with a couple of Heroes, a handful of Models, and a few points left over to purchase special equipment.
Point Cost: Every model, magic spell and piece of equipment in Gangfight has a point value that are added to a model's cost. The more points the model, the more that model brings to the battlefield. Simply add together the cost of each model to figure out your party size.
There is no set way to assemble a party in Gangfight. You can choose as many Heroes, Veterans or Recruits as you would like, and there are no penalties for mixing and matching units. In most settings, it is assumed that the party has gotten past their cultural differences and are working together towards a common goal.
Party Leader: Your party must consist of at least one Hero model that is considered your party leader. Models within 12" of your party leader use that model's Willpower (WP) instead of their own when making tests involving Bravery, Fear or Rallying.
Game Sequence
Initiative and Deployment: After you have set up the table and built your party, then you are ready to start the game. The first thing you need to determine is who goes first. Each player makes an opposed Initiative Value (TN 4) check with their Party Leader. The player with the most successes decides who deploys first and which side of the table they wish to deploy their band. The player who deploys their party first, also goes first and is designated as the Attacker. The party that acts second is designated as the Defender. Then, Models are deployed as specified in the chosen Engagement. In case of a tie, the player that rolled more dice wins. If this is also tied, re-roll until there is a clear winner.
Upkeep Phase: This is the first phase of a player's turn. During this phase, you must calculate how many Action Points each model has access to for the turn. To calculate this, you simply generate Action Points (AP) equal to their Initiative Value (IV). You can keep track of this with extra dice or tokens. As the Attacker goes first, in the beginning of a game the Defender begins with each model having 1 Action Point (AP) for Interrupts.
Player Phase: After all of the upkeep has been tracked, then comes the player phase. The player phase continues until the active player has Activated each model, one at a time, and used up all of their Action Points, or the player decides that their turn is over. The turn itself revolves around the use of Action Points.
The Round: The Round is completed when both players have completed their turns.
All of the actions that may be performed are listed on the next page.
The Turn: Players alternate taking turns. During their turn, each player follows the Game Sequence. During an active player's turn, a player can spend their Action Points (AP) when they activate a model. Once a model has been activated, they must spend all of their Action Points (AP) or hold them in reserve to use as interrupts during their opponent's turn.
End of Turn: After you've activated all of your models, your turn is over and the opposing player can begin their turn.
Actions
Throughout the Player's Turn, they will be required to spend Action Points (AP) so their models can perform Actions. Actions can be applied to a single model. Each Action uses up 1 Action Point from the model's pool.
- Finesse Attack: An Action Point can be spent for a model to make a Finesse Attack. Finesse Attacks are detailed in the Combat chapter.
- Fire: Models armed with ranged weapons may either load their ranged weapon, or fire it by using an Action Point. Making a Ranged Attack within the Threat Range of a model provokes a Free Strike.
- Charge: A model can declare a charge against an enemy model. To declare a charge, a model must have Line of Sight on the model. Once the charge has been declared, the controlling player rolls as many dice as their Movement (MOV) attribute. This roll has a difficulty of 2+ on flat terrain, 4+ on light terrain, and 6+ on dense terrain. For each success, a model may add +1" to the distance the model moves towards the enemy in addition to their standard move. Models that successfully reach their target (have the target within their threat range) gain +2 dice added to their Attack Pool in the subsequent Fight action should the model have enough Action Points (AP) to execute that action. If a model fails to get within threat range of an enemy, they still move the entire distance they rolled directly towards the intended target. A model may never move through another model, and must take the shortest distance towards the intended target.
- Interact: A model who is given the Interact Action can perform actions that involve scenery pieces. Mainly this is interacting with objects such as chests, doors, or objectives, and will be detailed in the specific scenarios when relevant.
- Jump/Climb: Models may attempt to climb a structure or other object by making a Movement check (TN4). Each success is equal to 1" of Movement. Models that have not completed a climb may continue to spend more Action Points to continue to climb and may end their turn mid-climb. It should be noted that this is for sheer surfaces. Using a ladder or rope is considered simply a Move action. To jump between two raised points, a model may attempt a Movement (MOV) check (TN 4) as well by spending a single Action Point, with each success equal to 1" of movement. A model that fails to clear the gap will fall (see page X for more details).
- Defensive Withdrawal: A model may spend an action point to make a defensive withdrawal from melee combat. When this action is declared, the model moves directly out of a model's threat range. The model may move in any direction, but cannot move further than their Movement (MOV). If a model is unable to move out of the enemy model's Threat (ie. trapped against impassable terrain), this action may not be declared.
Interrupts
If you hold onto Action Points during your turn, you can spend them during your opponent's turn to interrupt an action. These interrupts are specific and are the only actions that can be attempted during your opponent's turn. Interrupts must be declared before any models are moved.
Focus: A model that has additional Action Points (AP) in their pool prior to declaring a Fire or Fight Action may focus their attack. When a model declares they are focusing an attack, for each additional Action Point (AP) the player wishes to spend, they may add +1 die to their Marksmanship Pool or Attack Pool and +1 to their Damage Attribute. Thus, if a model spends 1 additional Action Point (AP), they will gain 1 additional Marksmanship die or Attack die and +1 to their weapon's Damage Attribute. If a model spends 3 Action Points (AP), they gain 3 additional Marksmanship dice or Attack Dice and +3 to their weapon's Damage Attribute. Focusing an attack cannot be used in conjunction with a Special Attack. Once a model Focuses an attack, all of their actions immediately end unless specified by another rule (ie. wielding a Martial Blade and using the Follow Through ability). In any circumstance, the maximum bonus that can be achieved by spending Action Points (AP) to Focus is +3.
Advance: If a model moves or acts within Line of Sight of a model that still has remaining Action Points, that model may declare an Advance. An Advance essentially allows that model to move their full movement in inches either towards the enemy, or to back away or seek cover. A model that Advances into an enemy model that is declaring a Charge! action counts as having made a Charge! action themselves, gaining the +2 bonus to their Attack Pool for the next attack. Should the model wish to continue their charge without stopping to engage the model that Advanced into their Threat Range, they will receive a Free Strike from the Advancing Model.
Fire: A model that has a loaded ranged weapon may attempt to fire on a model that is within the range of their weapon. A model may not load a weapon during their opponent's active turn.
Bulwark: A model may attempt to form a bulwark and defend themselves against their opponent's attacks. This gives the defending model a +2 bonus dice to their Armor (ARM) Pool. If a model is armed with a Spear or Polearm, they also negate the bonus a Charging model receives when executing a Charge! action. This bonus only applies for the duration of the corresponding attack.
Evade: A model may choose to Evade as an Interrupt Action. When doing so, they may Move a distance equal to their Threat Range, and by doing this also may ignore any additional effects from a Melee or Ranged Attack that may benefit from the result of Focusing that particular attack.
Fight: A model that is already in close combat can declare a Fight! action. After the active player has resolved his combat, then the non-active player may resolve their own attack. This means that even if a model is incapacitated after the active player resolves their attacks, they still get their attacks before being removed from the battlefield.
Action Sequence
Actions do have a sequence in terms of how they are executed. When in doubt, the model who declares the action is the one who executes the action first. This is especially important to remember during Interrupts, where both players act. The player who declared the initial Action typically rolls or completes their action first.
Combat
Melee Combat
Melee combat begins when a model falls within another model's threat range via the result of a Charge Action, or a Fight Action. Any model with an enemy model within its own Threat range, or that is within an enemy model's Threat range, is considered in Melee Combat. To execute an attack, you must follow the following steps.
- Check to see if the model you are attacking is within your threat range.
- If the model you are attacking is within your model's threat range, then you make an Attack Roll by rolling the number of dice in your Attack (ATT) Pool, with the Target Number being your opponent's Defense (DEF) attribute. If the Defense (DEF) attribute of your target is higher than 6, rolls of a natural 6 still count as a Success, but not a Critical success.
- Each die that matches or beats the target number is considered a hit. For each success you score against your opponent, you inflict 1 Wound.
- Your opponent then must attempt to negate the wounds by making a Saving Throw. To do this, they roll as many dice as they have in their Armor (ARM) Pool. The target number is your model's Damage (DAM) attribute. If the Damage is higher than 6, rolls of a natural 6 still count as a Success but not a Critical Success. Dice may be dropped from the pool to reduce this target number as usual.
- Each die that matches or beats the target number negates 1 Wound inflicted from the attack.
- Apply the remaining damage to the target's Endurance (EN) attribute, and record the amount left. If the remaining amount is 0 or less, your model is now incapacitated and can be replaced with an Incapacitation Token.
Note that even if a model does not take damage from the attack, they will still suffer the effects of the attack (such as those from a Power Attack or a Finesse Attack). Once this has been done, the Fight Action has been resolved. You are in melee combat until a model moves out of a model's Threat range, or one of the models is incapacitated.
Ranged Combat
Ranged combat begins when a model falls within another model's Line of Sight and is equipped with a Ranged weapon.
- Check to see if the model you are rolling to attack is within your model's Line of Sight.
- If the model you are attacking is within the Range of the weapon, then you can make a Marksmanship Roll. To make a Marksmanship roll, you roll dice equal to your Marksmanship (MRK) attribute, with the Target Number being your opponent's Defense (DEF) attribute. If the Defense (DEF) attribute of your target is higher than 6, rolls of a natural 6 still count as a Success but not a Critical Success. Dice may be removed from the pool to reduce this target number as usual.
- If your target is at Long Range (i.e., beyond your weapon's range) from your model, you must subtract 1 die from your Marksmanship (MRK) Pool, and you lose an additional die for each additional increment of 6".
- If your target is in melee combat with another model, you can only roll a maximum of 3 dice to hit, even if your Marksmanship (MRK) attribute is higher than 3.
- Each die that matches or beats the target number is a hit. For each success you score against your opponent, you inflict 1 Wound on your target.
- Your opponent then must attempt to negate the wounds by making a Saving Throw. To do this, they roll as many dice as they have in their Armor (ARM) Pool. The target number is your Ranged Weapon's Damage (DAM) attribute. If the Damage (DAM) attribute of your weapon is higher than 6, rolls of a natural 6 still count as a Success but not a Critical Success. Dice may be removed from the pool to reduce this target number as usual.
- Each die that matches or beats the target number negates 1 Wound inflicted from the attack.
- Apply the remaining damage to the target's Endurance (EN) attribute, and record the amount left. If the remaining amount is 0 or less, the model is now incapacitated and can be replaced with an Incapacitation Token. Note that even if a model does not take damage from the attack, he will still suffer the effects of the attack (such as those from a Power Attack or a Finesse Attack).
Once this action has been resolved, the Fire Action has been completed.
Damage
Damage is the result of successes being scored against a model during an Attack, whether it is a Melee Attack or a Ranged Attack. The more successes you score during an attack, the more Damage you will inflict and the more Wounds will need to be resolved. A model always suffers 1 wound on a successful hit, regardless of the result of the die roll.
Armor
Once you have had Wound inflicted against one of your models, you use your Armor pool to negate the wounds. We call this the Saving Throw. Each success you roll against your opponent's Damage value negates 1 wound. A model always suffers 1 wound on a successful hit, regardless of the result of the die roll.
Wounds
When a model scores a successful hit against a target, that model has scored Wounds against that target. If a Wound is not negated by an armor check, the Wound is applied to the model's Endurance (EN) attribute. When you have sustained more wounds than your Endurance (EN) attribute, that model has become Incapacitated. A model always suffers 1 wound on a successful hit, regardless of the result of the die roll.
Incapacitation
When a model suffers more Wounds than they have Endurance (EN), the model becomes Incapacitated. An Incapacitated model is removed from the table and replaced with an Incapacitation token (or simply tipped over). While incapacitated, a model cannot generate Action Points (AP), and cannot perform any actions unless otherwise specified on the model's profile. For all intents and purposes, a model is removed from the game unless a condition is applied where the incapacitated state is removed.
A model that sustains any further damage once they are Incapacitated are completely removed from the game, as those models are considered Dead.
Special Attacks
There are two types of special attacks in Gangfight: Power Attacks and Finesse Attacks. To execute either of these, the model attempting the strike spends an Action Point like normal.
There are some models that execute special attacks as part of their normal attack. In these circumstances, the amount of successful dice not only apply the effect of the Power or Finesse Attack, but also deal additional damage as well. These are considered more of a "normal attack plus a special attack", rather than simply a special attack. These situations will be called out in a model's profile.
Finesse Attacks: A Finesse Attack is a way for a model to disengage opponents and put some distance between them and their foes. A Finesse Attack inflicts less damage but allows for a model to move out an opponent's threat without the model suffering the effects of a Free Strike. When a Finesse Attack is declared, the model attacks as normal. If the attack is successful, instead of applying all of the successes to damage, the player may choose to move their model up to as many inches as successful hits scored. The moving model may not enter another enemy's threat range that they did not begin the action within.
Power Attacks: When a model executes a Power Attack, they are throwing all their weight behind the blow, attempting to knock an opponent back. A Power Attack inflicts less damage, but has the ability to knock back an opponent and put the attacker into a more strategic position. When a Power Attack is declared, the model attacks as normal. If the attack is successful, instead of applying all of the successes to damage, the player may choose to knock a model back 1" per success instead. The successes may be applied to damage and knockback as the attacker sees fit but must be allocated before any dice are rolled. Once the model reaches that specified distance, they must perform an Initiative Value (IV) test, with the Target Number (TN) being the Damage (DAM) value of the Attack. If they score less successes on this test than their opponent allocated to the pushback, they are knocked down.
Multiple Attackers: Being swarmed by enemy attackers is a very dicey situation. When multiple allied models have a single model within their Threat Range, they may reduce the threshold needed to score a Critical Hit. This threshold is reduced to a 5+ and is calculated at the time the Fight! action is performed. Thus, if two models are in combat with a single model, Critical Hits will be scored on a 5+ instead of a 6. If a model cannot move out of combat on their action due to terrain or impeding models, that threshold is reduced once again to a 4+. This condition is known as Isolated. Note that this only applies if the models declaring their attacks on the model have no other enemy models within their Threat Range.
If a model is pushed back into terrain or another model that would stop their progress, they stop moving and any additional successes are instead added to the Target Number to resist falling down.
Falling
Taking damage from falling is something that most warriors will have to contend with at some point in their career. If a model falls further than their model's height (1.5" for Medium Models, 3" for Large Models, and 6" for Huge Models), that model will suffer 1 Damage 4 Hit for each increment they fall, rounding up. (Printed as "1 Damage 4 Hit"; transcribed as printed.) Thus, if a Large Model falls 9 inches, that model will suffer 3 Damage 4 Hits. Distance is measured from the bottom of the model's base, and Armor rolls may be made as normal.
Trample
Large or Huge models may attempt to trample those that are smaller. When declaring a Trample, the Large or Huge model advances using their Movement (MOV) Pool, much like they would when declaring a charge, though there is no target in this particular instance (though there can be, which would lead them into combat though they do not receive the subsequent +2 Bonus to their Attack Pool). Any models that are caught under the Trampling Model's base (not threat range) suffer 1 hit equal to the Trampling Model's Damage Value. Each model affected may make a roll using their Initiative (IV) Pool (TN 4). Each success scored is +1 die they can add to their Armor Pool when attempting to negate the Damage. If a model receives no damage from the Trample, they may attempt to resolve a Free Strike against the Trampling Model. Models that score no successes on their Initiative test are Knocked Down. The Trampling Model may not end its move while on top of another model.
Free Strikes
A Free Strike occurs when a model moves out of the threatened area of an enemy model. A Free Strike is a free action and is performed just before the model actually leaves the threat zone, but after the move has been declared and initiated.
Knocked Down
Models that are knocked down are considered Prone. Prone models are always considered to have a Defense Value of 2 (as all rolls of 1 are automatically considered failures) regardless of their original value. A model that is prone MUST spend an Action Point to stand up before performing any additional actions.
Cover
Soft Cover
Models being targeted by ranged attacks can greatly benefit from cover. There are two types of cover: Soft cover and Hard cover. You can only benefit from cover if you are within your Threat Range of a piece of terrain that would provide cover to a model and is between the model and the origin of the attack being made.
Models behind or in soft cover are still in danger of having projectiles penetrating whatever they are shielding themselves with. Soft cover includes forests, shrubs, and fences. When you benefit from soft cover, your opponent suffers a -1 penalty to their Marksmanship Pool, and the target model receives +1 bonus to their Armor Pool. Soft cover counts as Light Terrain for Charging purposes.
For a model to be considered in cover, the obstacle or piece of terrain must at least cover 1/2 of the model's volume. If the model is completely obscured by an obstacle (such as a forest or wall), the model is not within Line of Sight and cannot be the target of an attack.
Hard Cover
Models behind or in hard cover are much safer from projectiles than those hiding behind soft cover. Hard cover includes rock walls, brick walls, large stones, and the corners of walls and such. When a model is against hard cover, your opponent suffers a -1 penalty to their Marksmanship Pool, and the model receives +2 bonus to their Armor Pool. Hard Cover counts as Dense Terrain for Charging purposes.
Fear and Bravery
Battle-Shock
On the battlefield, fear is a very real thing and can force a model to act in a very unintended fashion. There are two types of fear: fear caused by large or particularly horrible models, and fear caused from loss of fellow warriors.
When a model has an allied model reduced to an incapacitated state within a single turn within 12" and line of sight of them, they will receive one (1) Panic token. If the model that is incapacitated is the Party Leader, then the model receives three (3) Panic tokens.
Panic Tokens
When a model experiences an event that would cause fear, they accrue Panic tokens. A model can have an unlimited amount of Panic tokens on them. There are two ways to remove Panic tokens. In the Upkeep Phase, the active player can make a Willpower (WP) check (TN 4) for each model that has Panic tokens on them. For each success, 1 token is removed from the model. If there are Panic tokens still left on the model during activation, a model may spend 1 Action Point (AP) to remove a single token. Thus, if a model still has 3 Panic tokens on them at the beginning of the activation, they will need to spend 3 Action Points (AP) to remove those 3 tokens before they can act. If the circumstance arises that the model does not have enough Action Points (AP) to remove the tokens on them, they will be unable to act until they shed the tokens in the next Upkeep phase.
Fear
When beginning a model's activation within the Threat Range of a particularly terrifying creature, such as a creature with the Fear attribute, the model receives as many Panic tokens as indicated in the creature's profile under their Fear (X) trait. The X indicates how many Panic tokens the model must take on when activating within the threat range of that particular model.
Magic
Mystical powers can be found in most of our Gameworlds. It can be true magical powers, or also used to represent extremely advanced technology, or special powers that require a great deal of focus and discipline to perform. These rules apply to all special powers in Gangfight. A model will need to have a specific perk, trait or skill to allow them to use magic, and these will be listed in our Gameworld Modules.
Learning Spells
Each Gameworld Module will list spells or powers that are availabel to purchase. Your characters may learn total amount of spells equal to their Willpower (WP) attribute, however you are not required to puchase that many. If you would like to keep your model costs down, you could just select one. Some Gameworlds include special items such as Spellbooks that enhance your spells.
(Spelling "availabel" and "puchase" as printed.)
Casting Spells
When a model is ready to cast a spell that they have learned, a Willpower (WP) check must be made, with the difficulty indicated within the spell's description. If the spell is successful, the spell goes off without a hitch, as per the description of the spell. Only one success is required to cast the spell. Additional successes may be added to the effect of the spell, if it is detailed in the spell's description. Casting a spell is a Special Action.
Casting spells within the threat range of an enemy model provokes a Free Strike. A spellcaster that is wounded while casting a spell immediately fails the spell.
Spell Damage
When a spell is used to cause damage, the effect is devastating. When making an Armor Roll to avoid Damage from a spell, additional bonuses acquired from wearing armor are ignored and the roll must be taken at the base Armor value of the model. This makes magical damage very effective against infantry and far less effective against large creatures with naturally high armor. For example, if your target's ARM is a 4 because they are wearing light armor, they will make their armor roll with three dice against magical attacks instead of four.
Focus
A model that has additional Action Points (AP) available prior to casting may focus their Spell. When a model declares they are focusing a Spell, for each additional Action Point (AP) the player wishes to spend, they may add +1 die to their roll and +1 to their Damage Attribute (if applicable to the spell). Thus, if a model spends 1 additional Action Point (AP), they will gain 1 additional Willpower die and +1 to the Spell's Damage Attribute if applicable. If a model spends 3 Action Points (AP), they gain 3 additional Willpower dice and +3 to their Spell's Damage Attribute if applicable. Once a model Focuses their spell, all of their actions immediately end unless specified by another rule such as a perk or special weapon. In any circumstance, the maximum bonus that can be achieved by spending Action Points (AP) to Focus is +3.
Setting Up the Game
Gangfight is a dynamic experience where the game advances in different throughout the game.
A standard Gangfight Table is a 48" x 48" playing space, set up to look like a battlefield. 36" x 36" is commonly used for smaller games. A good table has 7-9 large pieces of terrain on it - such as forests, ruins, buildings, or something similar to that. Each of these large pieces of terrain should also have scattered terrain around it - scatter being things like rocky outcroppings, fences, walls - something that provides cover or is difficult to move over. There should be a piece of this sort of terrain for each 6" to 8" of open terrain.
Deployment Stage
The Engagement's description will list the details for deployment, each one is different and a diagram will be provided for easy reference. Unless otherwise noted, the Defender deploys their entire force, then the other Attacker deploys all of their force.
The Complications Stage
Once Deployment has been completed, the Attacker rolls a die to determine the complication that will be in place for the entire game, listed in the chart below. The complication is a small obstacle that pops up that is in effect the entire game. Complications are defined starting on page ###.
| Roll | Complication |
|---|---|
| 1 | Draw a Crowd |
| 2 | Bounty Hunt |
| 3 | Kill the Messenger |
| 4 | Press the Line |
| 5 | Vicious Storm |
| 6 | Night Battle |
The Engagement Stage
Once the table is set up, both players roll 1d6 and consult the Engagement below. The highest die roll is the scenario that is going to be played. If the players tie, that is the Engagement that is going to be played. Engagements are defined starting on the next page.
| Roll | Engagement |
|---|---|
| 1 | Raid |
| 2 | Point Defense |
| 3 | Ambush |
| 4 | Treasure Hunt |
| 5 | Escort |
| 6 | Hold Your Ground |
The Initiative Stage
Next comes the Initiative Stage. In this stage, both players roll an amount of dice equal to their party leader's Initiative Value (IV) with a Target Number of 4. The winner of this test gets to decide if they are the Attacker or Defender. The Attacker deploys first, but also gets to act first. The Defender deploys second, but also acts second and also has the opportunity to change the scenario to the second number rolled instead of the original scenario that was going to be played. The Defender also gets to choose which side of the table they would like to play on.
The Conclusion Stage
Once the game has finished, each player calculates how many objectives were scored throughout the game, depending on the rules listed in the Engagement's description. The player who scored the most objectives is declared the winner. In the unlikely event that each player scored the same amount of objectives, the battle was fought to a draw and a new game would have to be played another time to determine who is the actual victor.
Engagements
Source note: "Normal Deployment" is referred to in several Engagements but is not defined in the printed text; it is transcribed as printed.
1. Raid
Deployment: The Attackers deploy up to 18" on the battlefield, and the Defenders deploy up to 12" on the battlefield.
Objective: There are 4 zones on the battlefield.
- The Breach: This zone is 24" x 6" along the middle of the board. This area must be kept clear of enemies (typically this is represented by a low wall). If this zone is exclusively held by the Attacker for an entire turn without Defenders in the zone, the Attacker scores 1 Victory Point, and the other zones open up.
- Supplies: There are three supply zones that open up after the Breach has been taken. These zones are 6" x 6", and they can be destroyed. They have DEF 2, ARM 8, and EN 18 and are Huge. When a Supply zone has been destroyed, the Attacker gains 1 Victory Point. These zones cannot be targeted by Ranged Attacks or Spells.
Victory Conditions:
- Capture the Breach, Destroy the Supply Zones (4 Victory Points Total).
- The Defender gains 1 Victory Point each Round that the Breach is not occupied by the Attacker.
- The Defender gains 1 Victory Point each Round that the Attackers are not engaged with any of the Supply Zones.
- The game immediately ends when one of the players reaches 4 Victory Points, or their forces are reduced to less than 25%.
2. Point Defense
Deployment: Both players have Normal Deployment.
Objective: There are 3 zones on the battlefield.
- Defense Point: These zones are 12" long x 6" wide along the middle of the board, with 3" in between them. This area must be kept clear of enemies (typically this is represented by a low wall). Each turn spent uncontested in this zone is worth 1 Victory Point.
Victory Conditions:
- Capture the Points (5 Victory Points Total).
- The game immediately ends when one of the players reaches 5 Victory Points, or their forces are reduced to less than 25%.
3. Ambush
Deployment: The Attackers deploy up to 18" on the battlefield, and the Defenders deploy up to 12" on the battlefield.
Objective: There is one objective on the battlefield.
- The Breach: The breach is an 8" x 8" Objective Zone located 36" from the side of the board, and 12" away from the Attacker's table edge. The Attacker gains 1 Victory Point for reach Round the Defender does not have a model in The Breach.
- The Defender gains 1 Victory Point for each Round they spend in the Breach. If there are no Attackers in the Breach at the end of the Round, the Defender gains 2 Victory Points.
Victory Conditions:
- Hold The Breach (5 Victory Points).
- The game immediately ends when one of the players reaches 5 Victory Points, or their forces are reduced to less than 25%.
4. Treasure Hunt
Deployment: Both players have Normal Deployment.
Objective: There are 4 objectives on the battlefield.
- Treasure Piles: There are 4 Treasure Piles on the board on 50mm bases. Each one is located 18" away from each player's table edge and 12" from the side table edge - 24" away from one another.
- Each Treasure Pile can be interacted with by spending an Action Point. A model must interact with a Treasure Pile twice, and once it has been interacted twice - it cannot be interacted with again. Each Interaction is worth 1 Victory Point. A model cannot Interact with a Treasure Pile if it is within the Threat Range of an Enemy model. A Treasure Pile can only be interacted with one per turn, and only resets on the following turn.
Victory Conditions:
- Capture the Majority of the Treasure Piles (5 Victory Points).
- The game immediately ends when one of the players reaches 5 Victory Points, or their forces are reduced to less than 25%.
5. Escort
Deployment: Both players have Normal Deployment.
Objective: There is one objective on the battlefield.
- The Breach: The Breach is an 8" x 8" zone located 10" away from the Attacker's table edge, and 20" away from the table edge.
- There are four Commoners that must be deployed within 6" of Defender Models. These Commoners must stay within 6" of Defender Models at all times when acting. These models act during the Defender's turn.
- The Attackers can attempt to capture the Commoners by getting within the Commoner's Threat Range and making an Interact Action. Once this happens, the Defender must incapacitate the model in control of the Commoner. The Commoner controlled by an incapacitated model is free and will spend their action moving towards the closest friendly model.
- Each Commoner in The Breach is worth 1 Victory Point.
- The Attacker gains 1 Victory point for each turn that the Defender does not have a Commoner in their possession.
Victory Conditions:
- One of the players gains 4 Victory Points.
- The game immediately ends when one of the players reaches 4 Victory Points, or their forces are reduced to less than 25%.
6. Hold Your Ground
Deployment: Both players have Normal Deployment.
Objective: There is a piece of scatter terrain in the center of the board, such as an ammo crate or cache. It should be on a base at least 75mm in diameter, and no larger than 100mm.
- The goal is to have more of your team securing this piece of terrain, and less of the enemy team.
- At the end of each round, the team with the highest amount of models that have bases fully within 4" of the edge of this terrain piece will recieve 1 Victory Point. If both players have the same amount, no points are awarded.
Victory Conditions:
- The game immediately ends when one of the players reaches 5 Victory Points, this is when significant reenforcements will arrive forcing the opposing team to hastily retreat.
- They game can also end if one team is reduced to less than 25%.
Complications
Source note: the Complications chart in the Setting Up section names these complications "Draw a Crowd", "Bounty Hunt", "Kill the Messenger", "Press the Line", "Vicious Storm" and "Night Battle". The entry headings below are printed as "Uninvited Guests" (for Draw a Crowd) and "Bad Weather" (for Vicious Storm); both are transcribed as printed.
1. Uninvited Guests
The sounds of battle have attracted some unwanted attention! At the end of each round, 1d6 Uninvited Guests spawn from an Objective Zone on the map. If there are multiple Objective Zones, randomly determine which one they spawn from.
The exact nature of these Uninvited Guests depends on the Gameworld. They might be wandering creatures, hostile locals, dangerous wildlife, security forces, or something far stranger. Use the profile below for these Uninvited Guests.
| Type | MOV | ATT | MRK | DEF | IV | WP | ARM | EN | DAM |
|---|---|---|---|---|---|---|---|---|---|
| Guests | 3 | 3 | 3 | 3 | 3 | - | 4 | 4 | 4 |
After all players have completed the round, the Uninvited Guests take their own turn. Activate each one individually using the following rules:
- Fight: If the Uninvited Guests have a Player Model within its Threat Range, it will perform a Fight Action against the Player Model with the lowest Endurance. If multiple Models have the same Endurance, attack the closest one. If no Player Models are within its Threat Range, proceed to the next step.
- Charge: If a Player Model is within twice an Uninvited Guest's MV, it will attempt to Charge the closest Player Model. If two or more Models are equally close, it will Charge the Model with the lowest Endurance. If no Player Models are within Charge range, proceed to the next step.
- Advance: The Hostile NPC will make a normal Move toward the closest Player Model.
2. Bounty Hunt
There is a mark on two models on the battlefield - to the victor go the spoils! Pick out the model within each Warband that has the highest value. This model or unit is now a marked target. If this model is incapacitated, the player who dispatched the model or unit first rolls on the End Game Conditions Table and awards themselves 1 Victory Points (VP).
Source note: the "End Game Conditions Table" referred to here is not printed in the Gangfight core rules; it is transcribed as printed.
3. Kill the Messenger
There is a messenger among the ranks of the enemy, and they must be stopped. The Defender must choose a single model - this model is now marked and is a target for the Attacker. The model must exit the battlefield via the Attacker's table edge.
4. Press the Line
The enemy has pushed too far into your territory, and you have to get them out! The Attacker must press over the halfway point of the battlefield, and the Defender must keep them out. If the game ends without any of the Attackers more than 24" across the battlefield, the Defender gains 1 Victory Point (VP). If the Attacker has one or more models across the middle point of the board, they gain 1 Victory Point (VP).
5. Bad Weather
A storm rips across the battlefield. All Ranged Attack Penalties are doubled, and a model making a Ranged Attack can never gain a bonus when doing so. All Target Numbers related to a model's Movement Value (MOV) are increased by two, and a model may never run. After each round, both players roll 1d6. If both players roll the same number, the storm ends.
6. Night Battle
The battle takes place under the cover of darkness. Models cannot target any model further than double their Initiative Value (IV) in inches. A model may sacrifice a shield or offhand weapon for a Torch, which means they can target a model within the Initiative Value (IV) range of a target holding that Torch.
Alternate Rules
Gangfight Legacies
Though Gangfight is largely designed to play one-off battles against opponents, there is a way to play the game for extended campaigns in group that feels more like a combined roleplaying experience than a single combat scenario.
Starting a Campaign: When starting a campaign, each player taking part must make a 500 point list. Unlike normal gangs, here all of the members of your gang will start out as Recruits, and you will designate one of them as your leader.
Setting up the Game: As the model count is much smaller in a Legacy game, it can be played on a smaller table size - the most common being 36" x 36", though as your party increases in size, it is recommended that so does the size of the playing space.
Legacy Phases: In a Legacy game, there are five phases that take place outside of the actual game taking place.
The Battle Phase: This is a battle that takes place, like any other game of Gangfight, with one exception. Multiply any Victory Points earned at the end of the game by 10, and save those points for your party's Build Phase. For example, if you earned 5 Victory Points, you would get 50 Build Points.
The Aftermath Phase: After the battle has finished, each model that was Incapacitated must roll two dice and check their result on the Aftermath Table. This will determine the fate of each Incapacitated model. Models that have been "killed" during the battle (ie. removed from the table) roll one die on the Aftermath table instead.
The Advancement Phase: Each surviving model gains an Advancement. Roll two dice and consult the the Advancement table for each survivor and apply that to the model's unit profile. Each advancement will increase the cost of each member of your gang by 5 points.
Each Regular member of your party may advance 3 times, after that they are considered a Veteran. Vetarans also advance 3 times, then become a Hero. Heroes may advance 3 times, maximum.
The Build Phase: Each battle is worth points to help rebuild your losses and resupply. Each battle is worth 50 points, assuming both players have a party that is within 20% of each other's base amount (ie.150 pts on one another at 750 pts). If there is a differential larger than that, the player with the lowest amount of points is considered the Underdog. If the differential is more than 20%, then the underdog gains 2x as many points for completing the battle, regardless of winning or losing. If the differential is 50%, then the underdog gains 4x as many points as they normally would have. It would be recommended that a battle not be conducted with a larger differential than 50%.
These points can be applied to anything points normally can be applied to - recruiting new fighters, buying equipment, or anything else.
Aftermath Table
Once the battle is done, you must roll 2d6 on this table for each model that was Incapacitated in the Skirmish. If a model was "killed" during the battle, roll 1d6 on this table instead.
| Roll | Result |
|---|---|
| 1-2 | Dead: The model was struck dead instantly, and did not suffer. Their equipment can be distributed as the party deems fit. |
| 3 | Terrible Injury: A traumatic injury to the spine results in a loss of sensation and debilitating shakes. This model suffers -1 to all of their Attributes, which should be immediately recorded on the Party roster. |
| 4 | Maimed: A terrible wound to one of the model's limbs has left them permanently injured. Roll 1d6 and apply the results immediately. On a roll of 1-3, the model has suffered a severe injury to their arm, and must reduce their ATT by 1. On a roll of 4-6, the injury was suffered to the model's legs, and as a result must reduce their MOV by 1. |
| 5 | Head Wound: A massive wound to the head has left the model permanently wounded. Roll 1d6 and apply the results immediately. On a roll of 1-3, the injury was to the back of the head, and the model suffers from headaches - reducing the model's WP by 1. On a roll of 4-6, the blow was to the model's face, leaving them with a damaged eye - reducing the model's MRK attribute by 1. |
| 6 | Remarkable Recovery: The model has recovered from their injuries unscathed, but lost any Relics or Talismans during the course of the battle. |
| 7 |
Advancement Table
Each model that survives the encounter rolls 2d6 on the Advancement Table. This advancement is applied directly to the model's profile, which is recorded on the Party Roster. Each Advancement a member of your party earns will raise their cost by 5 points.
| Roll | Result |
|---|---|
| 2 | Swiftness: The model has learned how to take more measured steps - gaining +1 to their Movement (MOV) Attribute. |
| 3 | Martial Prowess: The model has learned the value of a critical strike - gaining +1 to their Attack (ATT) Attribute. |
| 4 | On Target: The model has learned the value of a steady hand - gaining +1 to their Marksmanship (MRK) Attribute. |
| 5 | Unwavering: In the face of fear, this model has learned to hold true - gaining +1 to their Willpower (WP) Attribute. |
| 6 | Toughness: Through adversity comes strength, and with it also allows the model to apply +1 to their Endurance (EN) Attribute. |
| 7 | Knowledge: The model has learned something new on the battlefield - and may choose any ability or trait that can be found in their faction list. |
| 8 | Toughness: Through adversity comes strength, and with it also allows the model to apply +1 to their Endurance (EN) Attribute. |
Gangfight Ventures
Gangfight can also be played alone or as a cooperative effort. When playing Gangfight in this fashion, it is recommended that smaller point amounts are played. If playing alone, 500 pts to 750 pts is recommended. If playing Gangfight as a joint venture, it is advised that the point amount is split between the amount of players taking part in the game.
When playing these sorts of games, it progresses as any other game of would, but the enemy actions are determined by following a sequence detailed below.
Enemy Model Sequence
- If a model is wounded, and it has the capacity to heal, it will attempt to do so.
- At the beginning of the activation, check to see if the model is within the Threat Range of an Enemy Model. If the model has an Enemy Model within its Threat Range, it will execute a Fight Action against the model with the lowest amount of Endurance. If there is no model with the model's Threat Range, go to 3.
- If there is an Enemy Model within double of the model's Movement (MOV), it will attempt to Charge that model. If there are multiple models within the model's Charge range, it will choose the closest model. If two models are of equal distance, it will Charge the model with the lowest Endurance. Enemy models will ALWAYS attempt to gang up on an enemy model given the opportunity. If there are no models within Charge range, go to 4.
- If the model is equipped with a ranged weapon, the model will shoot at the closest enemy model. If the model is not equipped with a ranged weapon, the model will Advance towards the closest model or objective (if applicable).
It should be noted that models will ALWAYS use all of their Action Points, and will not save Action Points to use as interrupts.
Enemy Model Exceptions
There are a great deal of different types of models that one may face in solo or cooperative play, and listed below are the exceptions to the sequence listed above.
Hero models will act as above, with the exception that they will always activate last - as they are leading the other models into battle. If they are within the Charge range of another hero, they will always target that hero or a model within range that has the highest Endurance (EN) score, instead of the lowest.
Magic Users or Healers are support characters and act as such on the battlefield. It is advised to keep these models at a minimum with solo or cooperative play, as they are far more complicated to use than normal models, though sometimes it is unavoidable.
Magic Users will always draw mana upon activation, and will attempt to cast a spell as their second activation should they have enough mana to do so. They will always attempt to cast the most damaging spell at the closest opponent. Should they be unable to do so, they will attempt to buff the closest allied model or themselves. Once this is done, they will act as dictated within the Enemy Model Sequence.
Healers will always attempt to heal and/or buff themselves or the closest allied unit before acting. Then they will follow the sequence listed above.
Playing Gangfight in this manner is largely a narrative experience, and is designed to be fun and exciting. The player(s) are expected to have to make a great deal of choices in how the game should advance to achieve maximum satisfaction.
Gangfight Rivals
Gangfight Rivals is a fast-paced game mode designed around small teams of powerful Heroes battling over valuable objectives. Unlike a standard game of Gangfight, there are no point values when building a party. Instead, each player created a party consisting of 4 Hero Models.
Gangfight Rivals uses the standard Gangfight rules except where noted below. Each Hero retains their normal Perks, Skills, equipment and other special rules. However, Rivals uses a simplified Characteristic Profile consisting only of Movement (MOV) and Endurance (EN). Characteristics that are not used in Rivals may be ignored.
Games of Gangfight Rivals are played over 6 Rounds on a 24" x 24" battlefield. The battlefield should contain plenty of terrain, including obstacles and structures that block Line of Sight and provide opportunities for models to take cover.
Weapons and Combat
Combat in Gangfight Rivals does not require dice rolls. When a model attacks with a weapon and has a valid target within Range and Line of Sight, the attack is successful and the target loses Endurance equal to the weapon's Damage.
When using weapons from a Gameworld Module, divide both the weapon's Range and Damage by 2, rounding down. A weapon will always have a minimum Range and Damage of 1.
If a Hero carries more than one weapon, they may choose which weapon they wish to use when making an attack. A Hero may only attack with one weapon during an Action unless a Perk, Skill or other special rule specifically allows otherwise.
Heroes retain their normal three Perks or Skills. Any Perk or Skill referring to a Characteristic or rule that is not used in Rivals should be ignored unless otherwise stated.
Setting Up a Rivals Game
Players begin in opposite corners of the battlefield. Each player deploys their 4 Heroes within 3" of their starting corner.
Place 4 Objective Markers on the battlefield. Beginning with a randomly determined player, players alternate placing Objective Markers until all four have been placed. Each Objective Marker must be at least 12" from either player's starting corner and may not be placed within impassable terrain.
If playing on a board divided into spaces rather than measuring distances, 1 space is treated as 1" for Movement, Range and all other rules involving distance. Models must still follow all normal rules regarding terrain, Line of Sight and movement.
Objectives
When a Hero reaches an Objective Marker, they may Search the objective as an Action. Roll 2D6 and consult the Rivals Objective Table to determine what the Hero discovers. Depending upon the result, an objective may provide Victory Points, valuable items, hazards, enemies or other unexpected effects.
Source note: the "Rivals Objective Table" is referred to here but is not printed in the Gangfight core rules or the Gameworld Module; it is not transcribed.
Unless otherwise stated by the Objective Table, an Objective Marker is removed from the battlefield after it has been successfully Searched.
The purpose of a Rivals game is to complete objectives rather than simply eliminate the opposing gang. Defeating enemy Heroes may make it easier to secure objectives, but eliminated Heroes do not award Victory Points unless specifically stated by an objective or special rule.
Defeated Heroes
Heroes do not remain out of the game when defeated. When a Hero is reduced to 0 Endurance, remove the model from the battlefield. The Hero returns to their gang's starting corner with their full Endurance at the beginning of their player's next Round.
Any objective or item being carried by a defeated Hero is dropped in the space or location where the Hero was defeated unless otherwise stated.
Ending the Game
A game of Gangfight Rivals ends after 6 Rounds. At the end of the final Round, each player totals the Victory Points earned by their gang from Objectives and other game effects. The player with the most Victory Points wins the game.
Gangfight Rivals is intended to be a quick and action-packed alternative to a standard game of Gangfight. With only four Heroes per side, no point values and no combat dice rolls, players can concentrate on positioning their Heroes, using their unique abilities and fighting for control of the battlefield.
Blackwater Gulch Gameworld Module
Setting flavour text (the opening story, the "Gold, Blood and Darkness" and "Something Is Wrong in the Gulch" chapters, and the narrative paragraphs describing each gang, race and profession) is omitted. Stats, gear, abilities, traits and posse-building rules are transcribed.
Getting Started
This Gameworld Module is designed to help get you up and running and adventuring your way through Blackwater Gulch using the Gangfight Skirmish Game System. All of the game mechanics can be found in the Gangfight core rules, and this module contains all of the details you need to create your posse.
To assist you in building your posse, we highly recommend downloading the Blackwater Gulch Character Cards on our website at SkirmishGames.com, and simply printing out the race and profession combinations you wish to play. You may also use the Gangbuilder on our website to build your posse roster.
We are going to assume that you already have a bunch of miniatures that you wish to use in your game. While we may produce some miniatures too, you are free to use any miniatures from any company you wish.
Starting on page ###, you will find lists of every race, and three skill levels for them: Recruits, Veterans and Heroes. You are free to select any race or level, but remember that you must have at least one Hero in your posse designated as your leader.
Next, you will select a profession from the list starting on page ###. These let you know which skills and equipment is assigned to the models in your posse. After you select your profession, you have the option to add extra gear, or select magical spells, prayers or bard songs if any of your characters possess the ability to use them.
In Blackwater Gulch, you will build a posse of adventurers all of whom will be working for one of the major gangs in town. These work like a faction which provides a special bonus to all of the members of your posse. Once you have decided upon the gang you wish to represent, you will select the race, profession and additional gear you wish to add to your characters.
And that's it! Just add up the cost for all of the members of your posse, and you're ready to play. We recommend most parties try to be around 1000 points total.
Gangs of the Gulch
The professions listed with each Gang represent those most commonly found among its ranks. They are preferences, not restrictions. Characters of any profession may join any Gang when their history, loyalties, and motivations give them a reason to ride together.
Each gang below lists its Gang Trait. The Gang Trait applies to the members of your posse who belong to that gang, as described in its entry.
The Bloodwolf Tribe
Gang Trait - Stone Under Moon: All members of the Bloodwolf Tribe are adept hunters that fear no beast, and as such all members will gain the Fearless ability when fighting against Werebeasts.
The Clancy Gang
Gang Trait - Dirty Fighters: The Clancy Gang doesn't believe in duels or honor, just doing whatever it takes to win. Any member of the Clancy Gang gains +1 ATT when fighting a target that is already engaged in melee combat.
Dread
Gang Trait - Relentless: Demons fighting alongside Dread are relentless horrors that refuse to fall. They do not become Incapacitated when reduced to 0 Endurance. Instead, they continue to act normally until they receive one more point of damage, or the turn in which they were Incapacitated ends, then removed from the game.
Los Rebeldes
Gang Trait - ¡Adelante!: Los Rebeldes rally together in a sudden push to advance and overwhelm their enemies. Any member of the Gang within 12" of their Gang Leader at the start of their activation gains +1 MOV, including the Gang Leader.
The Mavericks
Gang Trait - Lend a Hand: The Mavericks might be a collection of misfits, but they always look out for one another. When a friendly Maverick performs a Difficult Test, they may spend 1 available Action Point from another friendly Maverick within 6" instead of dropping dice from their Test Pool. The assisting model must have an Action Point available to spend.
The Secret Fist
Gang Trait - Ghost Step: The warriors of the Secret Fist move with uncanny precision, slipping from combat before their enemies can react. All members of the Gang may leave melee combat without provoking free strikes. If a model also has the Grace ability, it gains +1 MOV for its Move action when leaving melee combat.
The Tranquility Crew
Gang Trait - Gambler: All members of the Tranquility Crew take chances, and luck is usually (almost) in their favor. All members of your posse may reroll one die once per round from any one Action during their turn, or use it with an Interrupt Roll. The second result stands, whether it is a success or failure. This cannot be used to reroll the result of another reroll from any source.
The Unsung
Gang Trait - Shielded by Faith: Coming from a long line of holy warriors, The Unsung has a wealth of knowledge about all things that go bump in the night. Any member of your posse may reroll any failed Bravery Test when fighting against Demons or Undead.
The Vigilance Committee
Gang Trait - Stonewall: A good lawman doesn't flinch when the bullets start flying. All Vigilance Committee models treat Soft Cover as Hard Cover, but only when actually in cover. This does not combine with the Duck & Cover Trait.
The Wicked
Gang Trait - Eaters of the Dead: All Undead can spend an Action Point to feast on an Incapacitated model. When this is done, the model to be feasted upon is removed from the battlefield and the activated model may make an Endurance Test (TN 6). Each success scored is one Endurance the model heals, to a maximum of their original score.
The Widowmakers
Gang Trait - Velvet Trigger: The Widowmakers have learned that sometimes the only way to stand up to a bully is with a loaded gun. Most are women who have endured hardship and exploitation, and they are determined never to be helpless again. All female members of the Gang gain +1 Marksmanship, including the Gang Leader if applicable.
Wilde's Rangers
Gang Trait - Iron Sights: Wilde's Rangers stay cool under pressure, taking careful aim before unleashing a deadly shot. Any friendly model in the Gang armed with a Longarm, Shotgun, or Repeating Rifle adds +1 to their Marksmanship pool when performing a Focused ranged attack.
The Wolfpack
Gang Trait - Manhunters: The Wolfpack seeks to drive mankind from the wilderness, hunting Mortals with savage precision. All members of the Wolfpack may reroll any missed dice when fighting against Mortals in melee combat, once per activation. Dice cannot be rerolled more than once.
Wormwood Wardens
Gang Trait - Wormwood Wrath: The Wormwood Wardens aren't just guardians; they are the wrath of the forest made flesh. Mortals who trespass feel the land itself rise against them. Enemy Mortal models within 6" of any member of the Wormwood Wardens suffer -1 WP. This penalty stacks if affected by multiple models.
Races
Mortals
Mortals come in every stripe, from law-abiding townsfolk to desperate outlaws. Fragile, yet fearless, mortals shape the frontier one bullet and bad decision at a time.
Mortal Profiles
| Level | MOV | ATT | MRK | DEF | IV | WP | ARM | EN | DAM | COST |
|---|---|---|---|---|---|---|---|---|---|---|
| Recruit | 4 | 3 | 3 | 4 | 3 | 3 | 3 | 3 | 4 | 29 |
| Veteran | 4 | 3 | 3 | 4 | 3 | 4 | 3 | 4 | 4 |
Professions
Mortals are assigned a profession, defining which abilities they have and gear they carry. You can upgrade or add more gear simply by assigning it to a model and adding the cost to your roster.
The gear and abilities for each Mortal profession at each level are listed below.
| Profession | Level | Gear | Abilities |
|---|---|---|---|
| Backbone | Recruit | Pistol | Inspiring |
| Backbone | Veteran | Pistol, Layered Gear | Inspiring, Grace |
| Backbone | Hero | Pistol, Layered Gear, Liquid Courage | Inspiring, Grace, Grit |
| Bounty Hunter | Recruit | Longarm, Layered Gear | Duck & Cover |
| Bounty Hunter | Veteran | Longarm, Reinforced Wear | Duck & Cover, Marksman |
| Bounty Hunter | Hero | Longarm, Reinforced Wear, Brass Scope | Duck & Cover, Marksman, Grit |
Source note: the Ranger Hero line in the printed module reads "Repeating Rifle, Layered Gear, Native RemedyHero" (a typesetting slip); it is transcribed here as "Native Remedy".
Beasts
Shapechangers cursed into their dual nature, werebeasts straddle the line between man and monster. Whether wolves, bears, bats, or other beasts, they are fiercely territorial and often bound to nature's will.
Beast Profiles
| Type | Level | MOV | ATT | MRK | DEF | IV | WP | ARM | EN | DAM | COST |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Small Beast | Recruit | 6 | 3 | 2 | 4 | 3 | 1 | 3 | 3 | 4 | 41 |
| Werebeast | Recruit | 6 | 3 | 3 | 3 | 4 | 3 |
Similar to Mortal professions, all beasts have a breed assigned to them, listed below. Werebeasts also come in three varieties, with a Dire Werebeasts equal to a Mortal Veteran and an Alpha equal to a Mortal Hero.
The gear and abilities for each beast breed at each level are listed below.
| Breed | Level | Gear | Abilities |
|---|---|---|---|
| Werebat | Recruit | Natural Weapons, Tough Hide, Wings | Fly |
| Werebat | Dire | Natural Weapons, Tough Hide, Wings | Fly, Manhunter |
| Werebat | Alpha | Natural Weapons, Tough Hide, Wings | Fly, Manhunter, Assassin |
| Werebear | Recruit | Natural Weapons, Tough Hide | Follow Through |
| Werebear | Dire | Natural Weapons, Tough Hide | Follow Through, Brute |
| Werebear | Alpha | Natural Weapons, Tough Hide | Follow Through, Brute, Marauder |
Werebeast Breeds (continued)
| Breed | Level | Gear | Abilities |
|---|---|---|---|
| Werecat | Recruit | Natural Weapons, Tough Hide | Grace |
| Werecat | Dire | Natural Weapons, Tough Hide | Grace, Parry |
| Werecat | Alpha | Natural Weapons, Tough Hide | Grace, Parry, Pathfinder |
| Werecroc | Recruit | Natural Weapons, Tough Hide | Infiltration |
| Werecroc | Dire | Natural Weapons, Tough Hide | Infiltration, Vicious |
| Werecroc | Alpha | Natural Weapons, Tough Hide | Infiltration, Vicious, Duck & Cover |
Other Beasts
These beasts have a single set of gear and abilities and no level.
| Beast | Gear | Abilities |
|---|---|---|
| Sasquatch | Natural Weapons, Tough Hide | Follow Through, Slam |
| Cactus Cat | Spines | Marksman |
| Chupacabra | Natural Weapons | Stealth |
| Halfbreed | Natural Weapons | Vicious |
| Jackalope | Natural Weapons | Lunge |
| Mauntuak | Natural Weapons | Manhunter |
Demons
Demons are malevolent entities born of corruption, summoned from realms unknown or awakened by forbidden power. They feed on fear and suffering, warping the land around them with their presence.
Demon Profiles
| Type | Level | MOV | ATT | MRK | DEF | IV | WP | ARM | EN | DAM | COST |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Hellion | Recruit | 4 | 2 | 1 | 4 | 3 | 3 | 3 | 4 | 4 | 32 |
| Fiend | Veteran | 4 | 4 | 1 | 4 | 3 | 4 |
All demons have access to Corruption Powers, and are considered magic users even if they do not select any spells. Demons also cause fear, in addition to their regular abilities.
Source note: the demon profile table is printed as above ("All demons are have access" in the printed text is transcribed as printed).
| Demon | Gear | Abilities |
|---|---|---|
| Hellion | Hand Weapon | Powers, Fear, Manhunter |
| Fiend | Hand Weapon | Powers, Fear, Slam, Assassin |
| Incubi | Hand Weapon, Wings | Powers, Fear, Fly, Skirmisher |
| Primevil | Hand Weapon | Powers, Fear, Manhunter, Infiltration, Grit |
| Malignant | Hand Weapon, Wings | Powers, Fear, Fly, Mighty, Vicious |
Undead
The undead are twisted echoes of life. Shambling corpses, blood-drinking vampires, cursed revenants, and other horrors that defy death.
Undead Profiles
Source note: the printed Undead section repeats the Demon profile table above verbatim (same Types, Levels and values, including Hellion through Malignant). It is transcribed as printed.
| Type | Level | MOV | ATT | MRK | DEF | IV | WP | ARM | EN | DAM | COST |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Hellion | Recruit | 4 | 2 | 1 | 4 | 3 | 3 | 3 | 4 | 4 | 32 |
| Fiend | Veteran | 4 | 4 | 1 | 4 | 3 | 4 |
All Undead cause Fear and also have the Walking Plague ability, granting the chance to create a new zombie by defeating a mortal enemy in melee combat. This is in addition to any of their other abilities.
| Undead | Gear | Abilities |
|---|---|---|
| Vampire | Hand Weapon | Walking Plague, Fear, Assassin, Vicious, Infiltration |
| Wendigo | Hand Weapon | Walking Plague, Fear, Follow Through, Vicious |
| Revenant | Hand Weapon | Walking Plague, Fear, Manhunter, Assassin |
| Hulk | Hand Weapon | Walking Plague, Fear, Slam, Brute |
| Zombie | Hand Weapon | Walking Plague, Fear, Marauder |
Traits & Abilities
Traits & Abilities represent the special training, talents, and natural gifts that set a character apart. They can improve a character's effectiveness in combat, provide bonuses in certain situations, grant new options on the battlefield, or change how particular rules affect them. Together, they help define what makes each character unique.
Adept: You have learned to channel supernatural power with greater control and precision. You may reroll any 1s when casting Spells or performing Holy Prayers.
Armsman: You know your way around a close-combat weapon and can turn a poor swing into a solid hit. You may reroll any 1s when making melee attacks.
Assassin: You know how to press every advantage when a fight gets up close and personal. You may spend 1 Action Point to reroll one missed melee attack die, spending 1 Action Point for each die you reroll.
Big Iron: You are strong enough to shoulder weapons normally meant for a carriage or gun crew. If you are Large or Huge, you may wield Artillery Weapons as easily as a normal man carries a rifle. Mounted models cannot have this ability.
Brute: You rely on raw strength to overpower anyone foolish enough to stand toe-to-toe with you. All of your melee attacks are considered Power Attacks.
Desperate: When the shooting starts and fear sets in, you dig in instead of backing down. When you activate, immediately discard all Panic Tokens assigned to you.
Duck & Cover: You have a knack for keeping your head down when lead starts flying. You always count as being in Soft Cover, even while standing out in the open.
Fear: Whether through a terrifying appearance, supernatural presence, or sheer brutality, you put fear into anyone who gets too close. Issue a Panic Token to every enemy model within your Threat Range.
Fearless: Fear has little hold over you, whether through courage, hard-earned nerve, or something less natural. You are immune to Fear and automatically pass any Bravery Tests you are required to make.
Fly: You can take to the air and pass over obstacles that would stop anyone stuck on the ground. You may ignore cover while moving and always have Line of Sight when determining whether you can make a Charge.
Follow Through: Once you get rolling in a close fight, you are hard to stop. Whenever you Incapacitate an enemy model in melee combat, you may immediately make a free Full Move Action.
Grace: You are quick enough on your feet to slip away before an enemy can take advantage. You are never subject to Free Strikes.
Grit: You are tough as nails and have a habit of surviving hits that should have put you down. You may reroll any 1s when making a Saving Throw.
Healer: You know how to patch up a badly wounded companion and pull them back from the brink. You may attempt to resuscitate an Incapacitated friendly model within your Threat Range by making a WP Roll with TN 4. For each success, the model returns to the fight with 1 EN.
Infiltration: You know how to slip ahead of the rest of the gang and find a good position before the shooting starts. When deploying during a Scenario, you may be placed up to 6" farther forward than normally allowed.
Inspiring: Whether through stirring words, steady nerves, or natural leadership, you give nearby allies the courage to keep fighting. All friendly models within 6" gain +1 WP. This bonus is not cumulative with other instances of Inspiring.
Lunge: You know how to throw yourself into a Charge with sudden speed and aggression. When Charging, you gain +1 MOV and +1 ATT for the attack.
Manhunter: You have developed a particular talent for tracking and killing ordinary folk. You gain +1 MRK and +1 ATT whenever you attack a Mortal model.
Marauder: You rush headlong into a fight before your enemies have time to react. Once per activation, you may declare a Charge for free, provided the target is within double your MOV.
Marksman: You have spent countless hours mastering ranged weapons and know how to correct even the slightest error in your aim. You may reroll any 1s when making ranged attacks.
Mighty: Few opponents can slow you down once fists, claws, or blades start swinging. You never have dice subtracted from your melee attacks, regardless of the circumstances.
Sneak Attack: You know how to turn concealment into a deadly advantage. While you have a Stealth Token, you gain +1 ATT and +1 MRK when making attacks.
Stealth: You know how to move quietly and stay out of sight when the situation calls for it. You may spend 1 Action Point to generate 1 Stealth Token.
Vicious: You have no interest in leaving a fallen enemy alive. When you would Incapacitate an enemy in melee combat, that enemy is instead killed outright and immediately removed from the game.
Warden: You put yourself between danger and the folks fighting beside you. You may take an attack in place of any friendly model within your Threat Range.
Wildcraft: You draw power from the untamed land and the strange forces running through it. You have access to Wildcraft Rituals.
Wolfsbane: You have learned how to track and bring down the savage creatures known as Werebeasts. You gain +1 MRK and +1 ATT whenever you attack a Werebeast model.
Walking Plague: Undeath spreads through the victims you claim. When you Incapacitate a Mortal, that model's player must make a WP Test with TN 4. On a success, the Mortal is Incapacitated normally. On a failure, remove the Incapacitation Token and replace the fallen model with a fresh Zombie armed with the same equipment.
Parry: You know how to turn a missed swing into the perfect opening for a counterattack. Whenever an enemy misses you with a melee attack, you may immediately make a Free Strike against them.
Pathfinder: You are used to crossing rough frontier country that would slow down less experienced travelers. When moving, you treat all areas of the battlefield as Open Ground.
Powers: You have learned to command forbidden forces that most folks would rather leave buried. You have access to Corruption Powers.
Prayers: Faith can be every bit as powerful as gunpowder on the frontier. You may call upon divine aid and have access to Holy Prayers.
Reaper: You specialize in putting creatures that crawled out of the grave back where they belong. You gain +1 MRK and +1 ATT whenever you attack an Undead model.
Righteous: Whether driven by faith, vengeance, or grim experience, you know how to fight the infernal things stalking the frontier. You gain +1 MRK and +1 ATT whenever you attack a Demon model.
Skirmisher: You rely on speed, precision, and careful weapon placement rather than brute strength. All of your melee attacks are considered Finesse Attacks.
Slam: You hit hard enough to send an enemy staggering backward. Whenever you inflict a wound against an enemy, knock that model back and place it just outside your Threat Range, leaving it vulnerable to being Charged again.
Recruitment Skills
The races of Blackwater Gulch rarely fight alongside one another, and most Gangs are made up entirely of members of the same race. Only an exceptional leader can convince outsiders to join their ranks. Gang Leaders may purchase one Recruitment Skill in addition to their normal selection of Skills for 10 points. These special Leadership Skills allow the Gang to recruit characters from other Races that would normally be unable to join them.
Beguiler: You possess enough charm, influence, or supernatural sway to draw ordinary folk into an otherwise monstrous gang. If you are a Werebeast, Demon, or Undead leader, you may recruit Mortals.
Cultist: You have forged ties with infernal powers and can call demons into the service of your gang. If you are a Mortal, Werebeast, or Undead leader, you may recruit Demons.
Moontouched: You share an unusual bond with the shapechangers of the wild, allowing you to earn the trust or obedience of Werebeasts. If you are a Mortal, Demon, or Undead leader, you may recruit Werebeasts.
Necromancer: You command the powers of death strongly enough to bind the restless dead to your cause. If you are a Mortal, Demon, or Werebeast leader, you may recruit Undead.
Equipment
Equipment allows you to outfit your characters with the weapons, clothing, and useful gear needed to survive the dangers of Blackwater Gulch. Each Profession includes a selection of preferred equipment representing the items commonly carried by folks with that training, but characters may purchase any additional gear by simply adding its Cost to their total. Gang Leaders also have access to special ammunition and weapon alloys designed to be especially painful when used against certain Races, giving a well-prepared Gang an edge against even the strangest threats lurking in the Gulch.
Weapons
Hand Weapon - Range: Melee. DAM: Model's DAM. Cost: Free. A Hand Weapon represents any common one-handed melee weapon, such as a knife, club, saber, hatchet, or similar sidearm. It uses the character's normal melee abilities without providing an additional bonus or special rule. Unless upgraded to another melee weapon, every model is considered to have one Hand Weapon.
Natural Weapons - Range: Melee. DAM: Model's DAM. Cost: 5. Natural Weapons represent claws, fangs, horns, or other deadly parts of a creature's own body. A model with Natural Weapons gains +1 ATT and may reroll one missed die when making melee attacks.
Great Weapon - Range: Melee. DAM: Model's DAM +1. Cost: 10. A Great Weapon is a massive two-handed weapon such as a sledgehammer, heavy axe, or oversized blade, built to end a fight with one crushing blow. A character wielding one gains +1 DAM.
Bow - Range: 10". DAM: 4. Cost: 5. A Bow is quiet, dependable, and deadly in practiced hands. It has a 10" Range and DAM 4, and its Silent rule makes it especially useful for fighters who prefer to attack without immediately giving away their position.
Pistol - Range: 8". DAM: 4. Cost: 5. A Pistol is the frontier's most familiar sidearm, quick to draw and deadly at close range. It has an 8" Range and DAM 4, making it a reliable choice for gunfighters who expect trouble up close. Pistols may be used as melee weapons.
Shotgun - Range: 6". DAM: 5. Cost: 5. A Shotgun is brutally effective when the fight gets close. It has a 6" Range and DAM 4, and its Scattershot rule makes it even more dangerous at close range.
Source note: the Shotgun entry's stat line gives DAM 5 while its text gives DAM 4; both are transcribed as printed.
Repeating Rifle - Range: 12". DAM: 4. Cost: 5. A Repeating Rifle combines solid range with the ability to keep an enemy pinned down. It has a 12" Range and DAM 4, and its Suppressive Fire rule can force targets to spend precious time getting back into the fight.
Longarm - Range: 15". DAM: 4. Cost: 5. A Longarm is built for careful shots across open ground. It has an 18" Range and DAM 4, and its Accurate rule rewards a shooter who takes up a good position and holds steady.
Source note: the Longarm entry's stat line gives Range 15" while its text gives an 18" Range; both are transcribed as printed.
Dynamite - Range: 6". DAM: 5. Cost: 5. Dynamite turns a stick of blasting powder into a weapon no sensible gunfighter wants landing nearby. It has a 6" Range and DAM 5, and its Area of Effect and Explosive rules can make one well-placed throw a problem for everyone nearby.
Firewater - Range: 6". DAM: 4. Cost: 5. Firewater is a bottle of high-proof liquor prepared to burst into flame on impact. It has a 6" Range and DAM 4, and its Area of Effect and Burning rules make it ideal for flushing enemies from cover or setting a tight cluster of foes ablaze.
Gatling Gun - Range: 12". DAM: 4. Cost: 15. A Gatling Gun spits a relentless stream of lead across the battlefield. It has a 12" Range and DAM 4, with Inaccurate, Suppressive Fire, and Artillery rules reflecting a weapon that is cumbersome but terrifying once it starts firing.
Heavy Bolter - Range: 12". DAM: 4. Cost: 15. A Heavy Bolter is a massive frontier weapon built to hammer the restless dead with specialized ammunition. It has a 12" Range and DAM 4, uses Wormwood Ammo, and counts as Artillery.
Werecatcher - Range: 12". DAM: 4. Cost: 15. A Werecatcher is a heavy hunting weapon built for bringing down the toughest Werebeasts. It has a 12" Range and DAM 4, uses Silver Ammo, and counts as Artillery.
Armor and Protection
Layered Gear - ARM: +1. Cost: 5. Layered Gear combines heavy clothing, leather, padding, and whatever else a fighter can strap on before the shooting starts. It provides additional protection and increases the wearer's ARM by 1.
Tough Hide - ARM: +1. Cost: 5. Tough Hide represents thick skin, dense fur, scales, or another natural defense that shrugs off lesser blows. A model with Tough Hide gains +1 ARM.
Reinforced Wear - ARM: +2. Cost: 15. Reinforced Wear adds plates, hardened leather, metal inserts, or other protective layers to ordinary frontier clothing. A model wearing it gains +2 ARM, but the extra weight is Hindering.
Fortified Outfit - ARM: +3. Cost: 25. A Fortified Outfit is about as much protection as a fighter can wear without becoming a walking gun emplacement. Heavy layers and reinforced protection grant the wearer +3 ARM, but the weight is Hindering.
Gear
Brass Scope - Cost: 5. A Brass Scope gives a careful shooter a clearer view of targets trying to stay hidden. It may only be fitted to a Longarm and allows that weapon to target models in Stealth normally.
Bible - Cost: 5. A well-worn Bible can steady the hands and strengthen the conviction of a frontier Preacher. A Preacher carrying one gains +1 WP when performing Prayers.
Comfortable Boots - Cost: 5. A good pair of boots can mean the difference between reaching cover and catching a bullet in the open. Comfortable Boots grant the wearer +1 MOV.
Fancy Gunbelt - Cost: 5. A Fancy Gunbelt keeps a pistol exactly where a practiced gunfighter expects it. When used with Pistols, it grants the wearer +1 MRK.
Grimoire - Cost: 5. A Grimoire is filled with forbidden lore, strange diagrams, and rites best kept out of respectable hands. A Hexer carrying one gains +1 WP when using Corruption Powers.
Holy Relic - Cost: 5. A Holy Relic carries the comfort of faith and a measure of protection against dark forces. The bearer gains +1 DEF when attacked by Corruption Powers.
Liquid Courage - Cost: 5. Liquid Courage is strong enough to make danger seem like somebody else's problem. Spend 1 AP to drink it and gain the Fearless Trait until your next activation. Liquid Courage may only be used once.
Native Remedy - Cost: 5. A Native Remedy is a carefully prepared mixture of frontier herbs and traditional medicine. Spend 1 AP to use it and gain +1 DEF until your next activation. A Native Remedy may only be used once.
Smellin' Salts - Cost: 5. Smellin' Salts can shock a fallen companion back to their senses when there is no time for proper treatment. Spend 1 AP to use them on a friendly Incapacitated model as though the user had the Healer Trait. Smellin' Salts may only be used once.
Snake Oil - Cost: 5. Snake Oil may be dubious medicine, but sometimes a desperate fighter will take whatever help they can get. Spend 1 AP to drink it and regain 1 lost EN. Snake Oil may only be used once.
Spyglass - Cost: 5. A Spyglass helps a lookout pick movement out of distant shadows and hiding places. When spotting a target, remove all of that target's Stealth Tokens.
Totem - Cost: 5. A Totem is a sacred focus tied to the land, its spirits, or the traditions of the Shaman who carries it. A Shaman with a Totem gains +1 WP when using Wildcraft.
Ammunition
Holy Ammo - Cost: 10. Blessed ammunition made to fight infernal foes. Gain +1 DAM against Demons. Heroes only.
Silver Ammo - Cost: 10. Silver ammunition made to bring down Werebeasts. Gain +1 DAM against Werebeasts. Heroes only.
Vorpal Ammo - Cost: 10. Specialized ammunition made to hunt the living. Gain +1 DAM against Mortals. Heroes only.
Wormwood Ammo - Cost: 10. Occult-treated ammunition made to put the dead back in the ground. Gain +1 DAM against Undead. Heroes only.
Equipment Rules
Accurate: Accurate weapons reward a steady firing position. If the model has not moved before firing this weapon during its activation, it gains +1 MRK for that attack.
Area of Effect: Area of Effect attacks can catch several fighters in a single blast. When the attack hits, every model within 3" of the target is also hit by the attack.
Armor Piercing: Armor Piercing weapons punch through even the toughest protection. Models struck by this weapon cannot drop dice from their Armour Pool after a successful attack.
Artillery: Artillery weapons are heavy battlefield pieces mounted on stationary carriages. They cannot move and may be fired by a model in base contact, measuring range from the Artillery model itself. Artillery deploys with your gang and follows any special deployment rules of its crew. Only Veterans or Heroes may wield Artillery.
Burning: Burning attacks can turn a single wound into a spreading blaze. If at least one wound from a Burning attack is not soaked by Armour, the attacker may spend additional Action Points to inflict 1 automatic wound for each AP spent.
Explosive: Explosive attacks strike with enough force to throw their victims off balance even when the blast does not finish them. Models hit by an Explosive attack suffer a Power Attack in addition to any damage inflicted.
Hindering: Hindering effects make movement difficult and dangerous. While affected, all Actions that use the Movement Pool have their TN increased by 2.
Inaccurate: Inaccurate weapons are difficult to aim or control. Attacks made with an Inaccurate weapon have their TN increased by 1.
Scattershot: Scattershot weapons unleash a spread of shot that becomes especially devastating at short distances. A weapon with Scattershot gains +1 DAM when fired at close range.
Silent: Silent weapons can be used without immediately revealing a hidden attacker. Firing a weapon with Silent does not cause the character to lose a Stealth Token.
Suppressive Fire: Suppressive Fire sends enough lead downrange to force an enemy to keep their head down. After an attack with this weapon, the target gains a Suppression Marker. A model with Suppression Markers cannot act until it spends 1 Action Point per marker to clear them during its activation.
Mystical Arts
The strange abilities found throughout Blackwater Gulch take many forms, from Hexers weaving curses and dark magic to Shamans calling upon ancient spirits and Preachers placing their faith in a higher power. Each Power provides its own effects on the battlefield, from deadly attacks and supernatural protection to healing allies, weakening enemies, and bending the forces of the unknown to the character's will.
All Powers cost 10 points to add to your character, and you may only choose those belonging to your Profession.
Holy Prayers
Cleansing Wave - Range: 12". TN: 4. Cost: 10. Cleansing Wave calls down a merciful blessing to close wounds and steady a wounded companion. A friendly wounded model within range heals 1 EN for each success rolled.
Dispel - Range: 24". TN: 4. Cost: 10. Dispel calls on divine authority to cast down hostile sorcery before it can take hold. Used as an Interrupt, both Mages make an Opposed Test; if you win, the enemy spell is nullified.
Godspeed - Range: 12". TN: 5. Cost: 10. Godspeed sends your companions forward with the feeling that Providence itself is at their backs. All friendly models within 12" gain +1 MOV during their next activation.
Inspiring Sermon - Range: 12". TN: 5. Cost: 10. Inspiring Sermon rings out above the gunfire, putting fresh courage into everyone who can hear it. All friendly models within 12" gain +1 WP during their next activation.
Resurrection - Range: 12". TN: 6. Cost: 10. Resurrection is a desperate prayer for a fallen companion to be given one more chance. A friendly Incapacitated model within range heals 1 EN for each success rolled and may act during the current round.
Second Sight - Range: 16". TN: 5. Cost: 10. Second Sight asks for divine guidance to expose those hiding from righteous eyes. Remove one Stealth Token from an enemy within 16" for each success rolled.
Shield of Faith - Range: Self. TN: 6. Cost: 10. Shield of Faith surrounds you with the certainty that no bullet, blade, or claw can strike without Providence allowing it. Enemies targeting you lose 1 die for each success rolled.
Sword of Faith - Range: 12". TN: 6. Cost: 10. Sword of Faith places a fighting blessing upon an ally, filling them with righteous strength when the battle turns bloody. A friendly model within 12" gains +1 ATT during its next activation.
Wildcraft Rituals
Blast - Range: 12". DAM: 5. TN: 5. Cost: 10. Blast calls on the raw fury of the frontier, scorching nearby foes with a sudden burst of unnatural heat. Each success inflicts one DAM 5 hit on one enemy within range.
Fireball - Range: 16". DAM: 4. TN: 4. Cost: 10. Fireball gathers the heat of the badlands into a blazing shot hurled at a single foe. The target suffers one DAM 4 hit for each success rolled.
Dispel - Range: 24". TN: 4. Cost: 10. Dispel tears apart hostile sorcery before it can take hold. Used as an Interrupt, both Mages make an Opposed Test; if you win, the enemy spell is nullified.
Flight - Range: Self. TN: 4. Cost: 10. Flight calls the restless wind to lift you clear off the ground. You may fly 12", plus an additional 1" for each success rolled.
Gale Force - Range: 16". TN: 4. Cost: 10. Gale Force whips the frontier wind into a sudden blast strong enough to throw a foe backward. The target is knocked directly away from you 1" for each success rolled.
Grasping Roots - Range: 12". TN: 6. Cost: 10. Grasping Roots calls on the wild earth to snare a foe in twisting roots and thorny growth. The target loses 1 AP for each success rolled.
Nearsight - Range: Self. TN: 5. Cost: 10. Nearsight wraps you in swirling dust, wind, and shimmering air that spoils an enemy's aim. You become immune to Ranged Attacks until your next activation.
Quake - Range: 16". DAM: 3. TN: 4. Cost: 10. Quake calls on the land itself to buck beneath an enemy's boots. The target suffers one DAM 3 hit and is knocked down.
Second Sight - Range: 16". TN: 5. Cost: 10. Second Sight lets you read the signs others miss, revealing movement through dust, darkness, and concealment. Remove one Stealth Token from an enemy within range for each success rolled.
Stoneskin - Range: Self. TN: 6. Cost: 10. Stoneskin draws strength from the earth, hardening your flesh like sun-baked rock. You gain +1 ARM until your next activation.
Corruption Powers
Dispel - Range: 24". TN: 4. Cost: 10. Dispel Magic allows the caster to unravel an enemy's spell at the moment it is cast. Used as an Interrupt, both Mages make an Opposed Test; if the caster wins, the enemy spell is nullified.
Elegy - Range: 16". TN: 4. Cost: 10. Elegy seals the fate of a fallen warrior, preventing any hope of returning to the battle. Target one Incapacitated model within range and remove it from the game.
Fester - Range: 16". TN: 6. Cost: 10. Fester causes existing corruption to erupt within an already afflicted enemy. If the target has suffered Corruption damage this round, it loses 1 EN for each success rolled with no Saving Throw.
Hellblade - Range: Self. TN: 5. Cost: 10. Hellblade conjures a weapon of corrupting magical energy into the caster's grasp. The Mage gains +1 ATT until their next activation.
Lifedrain - Range: 12". DAM: 3. TN: 4. Cost: 10. Lifedrain tears vitality from an enemy and redirects that stolen life force to an ally. The target suffers one DAM 3 hit per success, and every wound it takes may be transferred to any friendly model within 6" of the caster.
Pestilence - Range: 12". DAM: 5. TN: 5. Cost: 10. Pestilence unleashes a wave of foul energy that can torment several enemies at once. Each success inflicts one DAM 5 hit on one enemy within range.
Raise Dead - Range: 12". TN: 6. Cost: 10. Raise Dead forces a fallen body back into service through forbidden magic. An Incapacitated model within range becomes a basic Undead Recruit with 1 EN for each success rolled and may act immediately.
Second Sight - Range: 16". TN: 5. Cost: 10. Second Sight reveals enemies concealed by mundane or magical means. Remove one Stealth Token from an enemy within range for each success rolled.
Spectral Grasp - Range: 16". TN: 6. Cost: 10. Spectral Grasp calls forth unseen hands that clutch at an enemy and hinder their every movement. The target loses 1 AP for each success rolled.
Touch of Death - Range: 16". DAM: 4. TN: 4. Cost: 10. Touch of Death channels corrupting power into a distant enemy, wracking them with supernatural torment. The target suffers one DAM 4 hit for each success rolled.