Battle of Borodino 1812
Battle of Borodino 1812 Rulebook
Table of Contents
Table of Contents
- 1. Game Board, Map, and Scale
- 2. Game Components
- 3. Game Counters
- 4. Sequence of Play
- 5. Movement
- 6. Zones of Control
- 7. Combat
- 8. Miscellaneous
- 9. Command
- 10. Reorganization
- 11. Victory Conditions
- Scenarios
- Abbreviations on the Counters
- Glossary
- Designers' Notes
- Combat Results Table
- Cooperation of Troop Types
- Terrain Effects Chart
- Victory Points Summary
- Sequence of Play
1. Game Board, Map, and Scale
1.1 Game board
The main part of the game board is a map of the battlefield, simplified for play purposes, with a grid of six-sided spaces (hexagons, hereafter referred to as hexes). The hexes are needed for regulating movement and the determining exactly where and in which location the counters are placed.
The hexes are numbered: the first two digits indicate the column and the next two indicate the row. If you need to put away the game, you can record the locations of the counters.
On the game board, besides the map there is additional information:
- The map legend
- The Combat Results Table
- The Turn Record Track, printed on the game board in the form of a time line on which the number of turns played is recorded (using the plastic marker from the game set)
- Two victory point tracks, one for each player (using the plastic markers from the game set)
1.2 Ten-sided Die
"Borodino 1812" uses a 10-sided die. A roll of "0" is considered a "10."
1.3 Shift
The concept of a "shift" relates to the Combat Results Table, which has columns of combat strength ratios. The use of a "shift" allows for the column to be changed either to the worse side or the better.
1.4 Game Scale
One game turn equals approximately 2 hours of real time. The distance from the center of a hex to the center of an adjacent hex is 1 km. Each counter represents an infantry (or cavalry) division, a cavalry corps, or several dozen guns from the artillery reserve. One combat strength point equals 1,000 men.
2. Game Components
The game includes:
- One game board with a map of the battlefield
- One countersheet
- One rule book
- One 10-sided die
- Three plastic markers (needed for recording the game turn and victory points)
3. Game Counters
The game includes counters which represent combat units.
3.1 Unit Counters
The unit counters reflect the actual combat units that participated in the battle. Unit counters are two-sided.
The front side shows the information necessary for the players (see "Unit Counter Symbols").
On them is indicated:
- The unit's characteristics (combat strength and movement rate). All ratings are given as numbers.
- The actual unit designation.
- The parent corps (the larger unit to which the specific division is subordinate), marked by a colored stripe (each corps has its own color).
- Special capabilities of certain units are indicated by stars. The more stars the greater the capabilities.
3.2 Back of Units
The back side of the units is needed if the players choose the "fog of war" game variant, in which the counters are turned face down so that one's opponent does not see which units are facing him (see rule 8.9). In the normal variant the backs of the combat unit counters are not used.
3.3 Dummy Counters
Players can use the dummy counters if they are using the "fog of war" game variant (see rule 8.9).
3.4 Fortification Markers
A "Fortification" marker has two sides, which characterize the status of the fortification: either "under construction" or "completed." For more details on fortifications, see rule 8.7.
3.5 Markers
The game has markers – plastic counters that serve to remind players of important game information.
3.5.1 Turn Marker
One of the plastic markers goes on the Turn Record Track. It is used to keep track of completed game turns.
3.5.2 Victory Point Markers
Each player puts one plastic marker on his Victory Points track (located on the map on the corresponding side of the board). It is used to keep track of the player's accumulated victory points.
4. Sequence of Play
The game consists of a series of turns, in the course of which a player is required to follow a strict sequence of actions, called phases. Phases cannot be swapped or skipped over. The game scenario indicates which side goes first.
A. First Player Turn.
- Movement Phase. During this phase the player may move any of his units in accordance with the rules for movement.
- Combat Phase. The player's infantry and cavalry units that are in the Zone of Control (ZOC) of enemy units (see rule 6.1) are required to conduct an attack (see rule 7.4).
Skirmishers may withdraw before battle (see rule 5.7).
Cavalry units may withdraw before battle if attacked solely by infantry or by infantry stacked with artillery (see rule 5.8.1).
A player's artillery stacked in "Battery" or "Grand Battery" may fire before a battle (see rule 7.4), but after withdrawal and pursuit of skirmishers and withdrawal of cavalry (see rules 8.3.4 and 8.3.5).
B. Second Player Turn. The second player repeats phases 1 and 2 in the same order.
C. End of Turn. The plastic turn marker is moved one space forward along the Turn Record Track. If the game has not ended, then the next turn begins.
5. Movement
5.1 Movement Points
Units move across the map from hex to hex. The maximum number of hexs that a unit may move through in one turn is determined by the number of movement points (MPs) the given unit has, as well as by the type of terrain in the hexes through which the unit is moving (terrain effects on movement are shown on the Terrain Effects Chart).
A player chooses the movement path of his own units. The path may be indirect.
5.2. A unit may not spend more movement points than it possesses, save them for the next turn, or give them to another unit. A unit must move along a path of contiguous hexes. When entering a hex, a unit must subtract from its movement points the number of points shown on the Terrain Effects Chart for that terrain type.
5.3. During their respective movement phases, the French player may move any number of his units, while the Russian player is obligated to move his units in accordance with to the "poor maneuvering" rule (for details on this rule, see the "Scenarios" section). Players are not obligated to move all their units (the Russian player is not obligated to move all units activated in accordance with the "poor maneuvering" rule) or to spend all their movement points.
5.4 Stacking of Units within a Hex
The number of units in a hex depends on the type of terrain in that hex (see the Terrain Effects Chart) and on command – only units from the same corps, as indicated by the color of the stripe on the counter (see rule 9), may be located in the same hex. A Fortifications counter counts against stacking (as one counter).
5.4.1 Forced Overstacking
If as a result of a forced retreat (as a result of combat or the withdrawal of skirmishers [see rules 7.8 and 5.7]) units must retreat into a hex where they would exceed the stacking limit, the situation is considered temporary overstacking.
Once temporary overstacking has occurred, units that violate the stacking limit in a hex must immediately retreat farther toward their edge of the map until the stacking limit is met. If retreat toward their map edge is not possible, then they may retreat in any other possible direction, choosing the hex with the clearest terrain (for more details on retreat procedures, see rule 9).
5.4.2. During movement, units may move through hexes containing friendly units. The stacking limit is enforced at the end of the movement phase.
5.5 Terrain Effects Chart (TEC)
On the TEC alongside each terrain type is shown a number, which is the number of movement points that a unit must spend to enter a particular hex.
If a unit crosses an obstacle that passes along a hexside (for example, a river), the TEC will show a number as "+N." This means that the unit adds the indicated amount to its movement point expenditure.
EXAMPLE: a division moves through 2 hexes of open terrain (1 MP each). It spends 2 MPs for this. Then it crosses a stream (+1 MP for the stream crossing) and enters the next hex with open terrain. In total, the division has spent 4 MPs for moving 3 hexes and crossing a river.
5.6. During its movement, a unit may not enter hexes occupied by enemy units, nor may it enter hexes with terrain that is impassable for that particular type of troops. All units except infantry have restrictions on what types of terrain they may enter.
5.7 Skirmisher Units. Withdrawal from Zone of Control during the Opponent's Turn
If their owning player wishes, skirmisher units (those units with the combat strength and movement allowance printed in green) may leave enemy ZOC at the end of the opponent's movement phase. Skirmisher units must retreat 3 hexes toward their own map edge, ignoring enemy ZOCs while doing so. When withdrawing, skirmishers must retreat toward their own side of the map, through the clearest terrain, avoiding enemy ZOC. Only if the given conditions are impracticable may they retreat through enemy ZOC or broken terrain.
5.8 Consequences to Skirmisher Units
Only skirmisher units adjacent to a hex left unoccupied as a result of the withdrawal of opposing skirmisher units may occupy that hex. However, during the Combat Phase skirmisher units that advanced may not themselves attack, nor may they be attacked.
Any cavalry units may behave like skirmisher units against enemy infantry and artillery (i.e., withdraw before combat).
Editor's note: the source refers to "rule 5.8.1" in the Sequence of Play and at rule 8.2.3. No rule 5.8.1 heading is printed; the cavalry withdrawal text above is the only such rule.
5.9 Roads
Units may use roads when moving. The use of a normal road allows a unit to move along it at a cost of 1 MP per hex. However, at the end of movement units must observe the stacking limit in their hex, and combat is conducted taking into account the terrain in which the units are located. The presence of a road has no effect on combat. Any terrain a road passes through costs 1 MP.
5.9.1 Bridges
A bridge has no separate effect on movement and is considered to be an integral part of the road. During combat a bridge is ignored, and all calculations are conducted based on the terrain in which the bridge is located.
5.10 Major Road
The game map shows the New Smolensk Road. It is a considered a normal road in all respects, with the exception that units moving along it pay ½ MP per hex.
5.11 Villages
The villages printed on the game map are for informational purposes only and have no effect on movement or combat.
This decision by the designer is connected with the fact that villages in Russia consisted primarily of wooden houses and could not have the tactical significance of, for example, the villages of Western Europe, consisting mainly of stone buildings well-suited for defense. Russian settlements and villages with wooden structures could be very quickly reduced to burning heaps by artillery fire and could not be regarded by the defending side as safe cover. Thus, for example, the village of Semenovskaya on the left flank of the Russian position was razed by Russian troops acting on their own just before the battle started.
5.12 Impassable Terrain
Woods are considered impassable terrain for supply wagons, cavalry, and artillery. These units cannot enter hexes containing woods. The exception is roads – cavalry and artillery may enter woods hexes only along a road.
6. Zones of Control
6.1. A unit's Zone of Control (ZOC) consists of the six hexes surrounding it. ZOCs do not extend into hexes that the unit cannot enter (hexes with impassable terrain). A ZOC affects the movement of units and their retreat after combat (see rule 7.8).
ZOCs also do not extend into certain types of terrain (see "Terrain Effects Chart" and "Impassable Terrain"). The absence of ZOC in a hex means that friendly forces may freely pass through it and are not obligated to attack adjacent enemy units.
ZOCs do not extend across rivers (don't mess with rivers!).
ZOCs do not extend into hexes containing woods, but they do extend out of them (that is, an infantry unit in a woods hex has a ZOC in the clear terrain hexes adjacent to the woods).
Cavalry ZOCs do not extend into brush, but at the same time infantry ZOCs do extend out of brush. Therefore cavalry will be required to stop in a hex adjacent to a brush hex containing infantry.
ZOCs do not extend out of fortifications, but they do extend into hexes with fortifications (that is, a unit in a hex adjacent to a fortification has the given fortification in its ZOC).
6.2 Entering Enemy ZOC
A unit must stop upon entering an enemy ZOC, regardless of the number of movement points it has remaining. Unused movement points are lost.
6.3 Leaving Enemy ZOC
A unit may leave enemy ZOC at a cost of 2 MP. In this case, the unit cannot enter any enemy ZOCs during that movement phase.
6.4 Effect of ZOC across a River
Zones of Control do not extend across rivers. However, if a player decides to conduct an attack across a river or to move across it, and there are enemy units in hexes adjacent to the unit (even including across the river), then he is required to conduct "diversionary" attacks with other units against all hexes with enemy units adjacent to the hex with his unit/units, or else attack them with the unit/units that are crossing the river.
7. Combat
7.1. During the combat phase, units that are in enemy ZOC are required to conduct combat. However, ZOCs do not extend into all types of terrain (for more details, see rules 6.1 and 6.4, as well as the Terrain Effects Chart).
7.2. IMPORTANT! If a unit begins its combat phase in an enemy ZOC, it is obligated to attack.
7.3. A unit may conduct only one attack per combat phase. All attacks are conducted sequentially, one after the other. The next attack is announced after the results of the previous one are clear. It is not allowed to move on to the next combat if the preceding combat has not been concluded and its results implemented. The attacking player determines the order of the attacks.
7.4. Obligation to attack. A player must attack all enemy units in whose ZOC his units are located. The player is not required to do this with those particular units, but may fulfill the attack obligation with other units of his. Such diversionary attacks must be conducted in the current combat phase.
A player is required to attack with all units stacked in a hex. He may not withhold a unit in a stack from participating in the attack.
7.5. Attacks out of/into Multiple Hexes. A single attack may not involve attacking from multiple hexes into multiple hexes. The attacks may be conducted in two ways:
- One unit from a single hex attacks several hexes.
- Several units from different hexes attack a single hex.
Attacks are carried out in the order chosen by the player whose turn it is.
7.6 Combat Sequence
7.6.1. The player indicates which of his units are participating in the attack and which enemy hex he is attacking. The combined strength of the attacking units is determined by adding together the combat strengths on their counters.
7.6.2. The attacking player determines all the bonuses being used in the attack (if any): for Combined Arms (see rule 8.5), Cavalry Charge (see rule 8.2.4), Guards (see rule 8.6), the presence of artillery (see rule 8.3.2), and the effect of terrain (see the Terrain Effects Chart). After that, he announces them to the defending player (i.e., the shifts and modifiers are calculated [see Glossary]).
7.6.3. After an attack is announced, its declared parameters cannot be changed.
7.6.4. After the attacking player has announced the parameters of his attack, the defending player totals the combat strength of his units and determines the bonuses in his favor (the calculation procedure is identical to rule 7.6.2).
7.6.5. When calculating the odds, round off in favor of the defender. For example, 9:5 is treated as 1:1 on the Combat Results Table, while 3:5 is treated as 1:2.
7.6.6. After determining the odds, the players find the column on the table on which the combat results will be determined.
7.6.7. The attacking player rolls the die. The number rolled indicates the row of the Combat Results Table that is crossed with the corresponding odds column. Where the indicated row and odds column cross determines the result of the combat.
7.6.8. Odds less than 1:3 are treated as 1:3. Odds greater than 4:1 are treated as 4:1. For example, a strength ratio of 6:1 is resolved on the 4:1 column on the Combat Results Table.
7.6.9. The Concept of "Outflanked." A stack defending behind an obstacle running along a hexside (such as a stream or river) receives a bonus only in the case where it has not been outflanked. The defender is outflanked if he is attacked by the enemy from at least one side where that obstacle is not present.
7.7 Combat Results
The result found on the CRT determines the outcome of the combat.
- D – result applies to the defender
- A – result applies to the attacker
- 1 – losing side retreats one hex
- EX – Sustained Fighting [Exchange]. Each side loses one participating unit (owning player's choice). Attacker retreats one hex (if he has any units remaining).
- Def – Defeated. One participating unit from the losing side (owning player's choice) is eliminated and removed from play. Remaining units retreat 3 hexes.
For example, in one attack a result of "A-Def" is received. Two units were involved in the attack. One of the two units must be lost. The attacker himself determines which of the units involved in the combat is eliminated. Then the remaining unit retreats three hexes.
Editor's note: the source prints the result codes in Cyrillic (А, Об, Рб, УБ) with English bracketed equivalents. The codes are rendered here in the English form only (A, D, Def, EX), and the Combat Results Table below uses the same codes.
7.8 Retreat and Pursuit after Combat
The losing side must retreat the number of hexes indicated on the Combat Results Table.
Important! Retreat is not movement. Movement Points are not expended when retreating. Retreating units are not allowed to retreat into hexes containing enemy units or that are in enemy ZOC. They are not allowed to retreat off the edge of the map (if a unit is forced by the game situation to retreat off the edge of the map, it is considered eliminated).
A retreating unit must retreat the full number of hexes indicated on the CRT.
A unit may not end its retreat so that the number of hexes between the hex in which it ends the retreat and the hex where the combat took place is less than the number the unit received in the combat result.
The attacker may, if he wishes, occupy the hex vacated as a result of the combat with units that participated in that particular combat, within the stacking limit of the terrain (observing the stacking rules and taking the terrain into account).
7.8.1 Priorities When Determining Path of Retreat, in Decreasing Order
- Not into enemy ZOC.
- Observing stacking limits.
- Toward the owning player's map edge.
- Into the clearest terrain (i.e., the player should choose terrain without woods, hills, marsh, etc.).
7.9 Pursuit by the Defender after an Unsuccessful Attack
The defending player cannot pursue (exception: Cavalry Breakthrough – see rules 8.2.4 and 8.2.6).
7.10 Retreat through Enemy ZOC or into an Impassable Hex
If a unit/stack is forced to retreat through enemy ZOC, then one unit from the retreating stack makes an "elimination check" die roll, regardless of the number of hexes in enemy ZOC through which the unit retreats. On a roll of 8+, the unit is eliminated. The stack must continue to retreat until it reaches a hex free of enemy ZOC. If the stack cannot retreat, it remains in place and conducts the indicated "elimination check" where it is.
7.11 Retreat into an Impassable Hex
If a unit, as a result of combat and for lack of other retreat paths, must retreat into a hex that is impassable for that particular type of troops (see rule 5.12), it remains in place and makes an "elimination check." On a roll of 8+ the unit is eliminated. If the retreat involves a stack of units, only one unit from the stack makes the check.
Comprehensive Example of Combat
Three French infantry divisions from one corps (combat strengths of 6, 4, and 4) conduct an attack from one hex against a Russian stack consisting of an infantry division (combat strength of 6) and an artillery counter.
The strength ratio is 16 against 6 (the strength of the Russian artillery is not counted – it provides a shift), for a total of 2:1 (the ratio is rounded in favor of the defender). But the artillery provides a column shift on the Combat Results Table in favor of the Russian player. Thus the column that the French player will use on the table when he rolls the die becomes 1:1.
The die roll is a 7 – the result is "D-1."
This means that the Russian player's stack is thrown back 1 hex without any losses.
Editor's note: the source prints this example, unnumbered, after rule 7.11.
8. Miscellaneous
8.1. Cooperation of Troop Types. The combination of troop types in a single stack can give the stack special capabilities. Specific combinations of troop types are given below and also summarized separately on a special Cooperation of Troop Types table.
8.2 Cavalry
8.2.1. Cavalry cannot attack infantry in woods, brush, fortifications, or behind rivers (see the Terrain Effects Chart).
8.2.2. Cavalry may enter hexes adjacent to enemy-occupied hexes with terrain that is inaccessible to cavalry. If in the combat phase such enemy units are not attacked by other unit's belonging to the attacking player, the cavalry will be obligated to attack an enemy in inaccessible terrain and, instead of actually attacking, the cavalry units are eliminated. This rule does not apply to movement along a river, since ZOC does not extend across a river (no attack will be required in the combat phase).
8.2.3. Cavalry is treated as skirmishers against infantry and artillery (see rules 5.7 and 5.8.1). The presence in an enemy stack of at least one artillery or infantry unit allows cavalry to retreat before combat. Cavalry cannot pursue skirmishers.
8.2.4. Cavalry Charge. Cavalry units may conduct cavalry charges. Only if cavalry (without infantry or artillery) attacks the enemy in open terrain or hills, it receives one (light cavalry) or two (heavy cavalry) shifts in its favor on the CRT. Light cavalry has its combat strength printed in green, while heavy cavalry has it in red. If a stack contains both light and heavy cavalry, it gets two shifts.
A cavalry charge can be used only in the case where all the cavalry units (both defending and attacking) are located in clear terrain or hills and at the same time there are no obstacles in the form of rivers, streams, swamps, or brush between them and the enemy.
Attacking cavalry units may also use "Breakthrough" (see rule 8.2.6).
8.2.5. Counterattack. Only if cavalry (without infantry or artillery) located in clear terrain or hills is attacked by enemy units located in clear terrain or hills, then it may use a cavalry charge (see rule 8.2.4) even on defense, while remaining in place. If the defending cavalry is located behind an obstacle, it does not receive the shift in its defense.
Moreover, defending cavalry units may use Breakthrough (see rule 8.2.6) just as if they were attacking (apply shifts).
8.2.6. Breakthrough. If there are two or more cavalry units stacked together (without infantry or artillery), the stack may conduct a breakthrough. If the attacking player obtains a retreat or "Defeated" result against the defender in a combat, or if a stack attacking cavalry receives an adverse result (A-1, A-Def), then surviving units on the losing side retreat 3 hexes. The cavalry units may pursue along the path taken by the losing side, ignoring enemy ZOC. In addition, one retreating unit from the losing side makes an "elimination check." On a roll of 8+ it is eliminated.
8.2.7. Recovery after Attack. Cavalry units may retreat 3 hexes after the combat phase (either friendly or enemy), ignoring enemy ZOC.
8.3 Artillery
8.3.1. Artillery is considered a combat unit. It may move on its own, but for it to be put to use it must be in attacking or defending stacks. Artillery may not attack independently if not stacked with other troop types.
8.3.2. Each artillery counter gives one combat shift in favor of its owning player.
8.3.3. The combat strength of artillery is enclosed in parentheses. This means that it cannot enter enemy ZOC by itself. Its combat strength is NOT used when calculating the combat strength of a stack – artillery only provides an artillery shift.
An artillery unit's combat strength of (1) is used only when it is attacked by enemy units while alone in a hex. That is, artillery combat strength will be counted only in the situation where there are no units in the hex other than artillery (don't forget about the artillery shift in this case).
8.3.4. Battery. A stack of two artillery units may conduct independent artillery fire at a range of 2 hexes, not counting the hex from which the fire is conducted. They are allowed to fire through friendly units.
The player rolls the die. On a roll of 8+, the targeted enemy stack loses one unit. The firing units must be able to trace a line of sight (see rule 8.4). When attacking a battery, rule 8.3.3 applies.
Editor's note: the source refers to "rule 8.4" for line of sight. No rule 8.4 heading is printed; the line of sight text is rule 8.3.7 below.
8.3.5. Grand Battery (French Player Only). A stack of three artillery units may conduct independent artillery fire at a range of 2 hexes, not counting the hex from which the fire is conducted. They are allowed to fire through friendly units.
The player rolls the die twice. On a roll of 8+, the targeted enemy stack loses one unit (if both die rolls are 8+, it is possible to eliminate two enemy units). The firing units must be able to trace a line of sight (see rule 8.4). When attacking a grand battery, rule 8.3.3 applies.
A grand battery may fire at two different hexes (i.e., each die roll may be against a different hex). The second target is chosen after the result of the first fire is determined.
8.3.6. Artillery may fire through friendly units.
8.3.7. Line of Sight. A line of sight cannot pass through woods or hills. In order to determine line of sight, a player should use a straight edge (such as a ruler) to trace a line from the center of the hex his units are firing from to the center of the target hex. If the line crosses or touches even one part of a hex (including just the hexside) with terrain that can't be seen through, then the line of sight is considered blocked.
8.5. Combined Attack or Defense. If a stack consists of three types of troops (infantry, cavalry, and artillery), the owning player may reroll the die when attacking or defending – use the result of the second die roll.
When both sides are entitled to use this rule in the same combat, there is no reroll.
8.6. Guards. If in a combat a player uses units with a star symbol (see rule 3.1), he must roll an additional die on the Combat Results Table and choose the result that is better for him.
Each star symbol provides 1 additional die roll.
The use of guards on both sides in a combat cancels the indicated effect on the basis of one star for one star.
Note that each time your guards participate in combat, your opponent receives victory points (see rule 12.1).
For example, a French Old Guard unit (2 stars) attacks a Russian Guard unit (1 star). One star from each side cancels the other out, and the Old Guard rolls two dice in the attack and chooses the one that gives him the better result. That is, the attacker chooses the higher number. If guards participate in combat as the defender, the attacker chooses the die roll with the lower result. In this example, the Russian player earns 2 victory points and the French player earns 1.
Editor's note: the source refers to "rule 12.1" for victory points from guard combat. No rule 12.1 heading is printed; the victory point schedule is in rule 11.1 below.
8.7 Fortifications
Only the Russian player has fortification counters. During his movement phase the Russian player may place a fortification counter on any infantry unit. The unit must occupy a hex containing only clear terrain or hills.
Units located in fortifications are not obligated to attack enemy units in adjacent hexes during their combat phase. In order for an infantry unit to begin building a fortification (as indicated by their fortification counter), it must not move during its movement phase. Placing the fortification marker takes up the counter's entire movement phase and is counted when determining the number of active counters for purposes of the "poor maneuvering" rule (see the "Scenarios" section).
Until the end of the day (before the 3rd, 4th, or 10th turn – see the Turn Record Track on the game map), the fortification is considered "under construction" and the corresponding side and characteristics of the fortification counter are used. When night comes (the game turn marker enters the next day – turns 4 and 5), the fortification counter is flipped to its "completed" side and the fortification's characteristics improve.
A fortification is considered a normal combat unit. Fortifications cannot move. When attacking a fortification "under construction," subtract 1 from the die roll. When attacking a "completed" fortification, subtract 2 from the die roll. These modifiers are also applied to artillery fire.
If as a result of combat units located in a hex with a fortification must retreat (even if the hex contains only the fortification), then the fortification is destroyed.
Destroyed fortifications cannot be rebuilt.
8.8 Supply Wagons
Supply wagon counters that are attacked are immediately eliminated. Victory points are awarded for eliminated supply wagons. In addition, eliminated units are rebuilt in hexes with supply wagons, subject to the stacking limit, or in hexes adjacent to supply wagons (see rule 11.1).
8.9 "Fog of War"
By mutual agreement, both sides can play secretively. In this case, both players turn their counters face down with the back side (with the coat of arms) showing, and a player is not allowed to see the information on the other player's counters until he is in contact with them (i.e., until his units are in adjacent hexes). A revealed counter can be returned to hidden status only at night (after the 3rd and 4th turns; see the Turn Record Track on the game map).
8.10 Dummy Counters
Dummy counters are used to mislead the opposing player. Dummy counters can themselves reveal enemy counters (when attacking or when being attacked). The movement allowance of dummy counters is 6. A revealed dummy counter is removed from the game. Revealed counters may be returned to the game only at night (after the 3rd and 4th turns; see the Turn Record Track on the game map) in hexes with any friendly units, subject to the stacking limit. A dummy counter cannot retreat before combat. Fortifications are not allowed to be placed on dummy units. Movement of a dummy unit is counted when determining the number of active counters for purposes of the "poor maneuvering" rule.
9. Command
A hex may contain units from only one formation, i.e., they must belong to a single corps. Units from the same corps are marked with the same color.
Important! Fortification markers, all cavalry units, and artillery units may stack with each other and with any infantry units.
10. Reorganization
10.1. Replacement of Defeated Units. Units eliminated in combat may be replaced. In order to replace a unit, a player, during his movement phase, must select one of two eliminated units of the same troop type (infantry, cavalry, or artillery) and replace it. This unit cannot move or attack this turn, but it may defend. The second unit remaining after replacement is removed from the game. Replaced counters are not counted when determining the number of active units for purposes of the "poor maneuvering" rule (see the Scenarios).
10.1.1. If among the units eligible for replacement there are units with different characteristics, select the unit with the worse ratings. When there are different bonuses, the better unit is the one with the best bonus.
10.1.2. A unit being replaced must appear in or adjacent to a hex with a supply wagon.
10.2. Return of Completely Eliminated Units to the Game. At night (after the 3rd and 4th turns; see the Turn Record Track on the game map) any unit that has been removed from the game after taking replacements may return to play in or adjacent to a hex with a supply wagon. However, the player must pay for this replacement with the number of victory points that are given for an eliminated unit of that type at the end of the game (see rule 11.1).
10.3. Fortifications and supply wagons cannot be replaced.
11. Victory Conditions
11.1. Victory Points. In the course of the game, each side accumulates victory points (VP). The difference in accumulated points, which are added up at the end of the game, determines the winner.
A player receives victory points as follows:
- 1 VP – for each defeated infantry unit removed from the game
- 2 VP – for each defeated cavalry unit removed from the game
- 4 VP – for each artillery unit removed from the game
- 10 VP – for each supply wagon removed from the game
- 5 VP – for each defeated Guard unit removed from the game (with an elite star)
- 10 VP – for each defeated Old Guard unit removed from the game (with two elite stars)
- 1 VP – for each French combat unit (excluding dummy counters, artillery, and supply wagons) that leaves the map through the exit zone on the eastern (Russian) side of the map
- 1 VP – for each captured Russian fortification (i.e., removed by the end of the game)
- 1 VP – for each combat in which enemy Guard units participate (with one star)
- 2 VP – Russian player only, for each combat in which an Old Guard unit participates (with two stars)
Editor's note: the source has no rule 12.1 heading. The victory point schedule above is the text it cross-references as rule 12.1 (in rule 8.6); it is printed here under 11.1 as in the source.
12.2. Procedure for Recording Victory Points. The victory points accumulated by each side are recorded by the players using the plastic markers on the Victory Point tracks located on the game map. At the end of the game, the difference between the players' victory point totals is calculated and the winner is determined.
Scenarios
Scenario No. 1: Battle for the Shevardino Redoubt
Scenario length: 3 turns. The scenario lasts from Turn 1 to Turn 3 inclusive, until the end of 24 August (Old Style).
Deployment of forces:
Russian forces are deployed on the map in accordance with the numbers of the divisions and corps printed on the map.
French forces enter the map from the western side of the battlefield in accordance with the diagram of corps entry prepared by the French player. Entering forces are not required to appear only along roads.
"Fog of War": By mutual agreement, both sides may use "fog of war" (see rule 8.9). In this case, both sides receive dummy counters.
The Russian player has the right to flip his units over in any hexes on the map other than those west of hex row 05xx.
The French player has the right to enter his forces from any hex on the western edge of the map.
First turn: The French player goes first.
Victory conditions:
The French player wins if by the end of the 3rd turn he controls Shevardino (0711), the hills adjacent to Shevardino (0712), and Bezzubovo (0706). Moreover, the French player must achieve a +2 difference in his favor when totaling victory points.
Any other result is considered a Russian victory.
Scenario restrictions:
The Russian player may use no more than 2 fortification markers.
The Russian player is not allowed to move the Guards V Corps, the VI Infantry Corps, the I Cavalry Corps, or the 1st Cuirassier Division.
Poor maneuvering: In order to reflect the low quality of maneuvering of the Russian forces (the presence in the forces of a great number of newly arrived recruits and militia), the Russian player rolls a die at the beginning of his turn. The result indicates the maximum number of counters that the Russian player may move this turn. However, in any given turn he may move at least 5 of his counters.
Scenario No. 2: The Battle of Borodino
Scenario length: 6 turns. The game lasts from Turn 5 to Turn 10 inclusive, the entire day of 26 August (Old Style).
Deployment of forces:
Russian forces are deployed on the map in accordance with the numbers of the divisions and corps printed on the map, with the following exceptions:
- 1 Russian fortification is destroyed (it is counted in the French player's VP)
- 4 completed Russian fortifications are placed in hexes 0806, 0808, 0609, and 0312
- 2 Comb Gren/VIII and 27/VIII – 0806
- 2 Gren/VIII – 0707
- II Cav Corps – 0608
- 12/VII and the artillery from hex 0708 – place in hex 0807
- III Cav Corps – 0607
- 2 Cuir and IV Cav Corps – 0606
- Platov's Cossacks – 0615
- 1 Gren/III and 3/III – 0604
- Karpov's Cossacks – 0704
French forces are deployed on the map in accordance with the setup markings printed in blue on the map.
Historical note: The setup of forces is given with the early morning attack of Delzon's 13th Division on the Guards Jaeger Regiment at the village of Borodino already taken into account. At the start of the scenario, Borodino is already controlled by the French.
First turn: The French player goes first.
Poor maneuvering: In order to reflect the low quality of maneuvering of the Russian forces (the presence in the forces of a great number of newly arrived recruits and militia), the Russian player rolls a die at the beginning of his turn. The result indicates the maximum number of counters that the Russian player may move this turn. However, in any given turn he may move at least 5 of his counters.
Victory conditions:
- French decisive victory: 17+ VP in the French player's favor
- French tactical victory: 9-16 VP in the French player's favor
- Draw: 1-8 VP in the French player's favor
- Russian tactical victory: 0-8 VP in the Russian player's favor
- Russian decisive victory: 9+ VP in the Russian player's favor
Grand Scenario No. 3: Borodino 1812
Scenario length: 10 turns. The scenario lasts 10 from Turn 1 to Turn 10 inclusive – 24-26 August (Old Style).
Deployment of forces:
Russian forces are deployed on the map in accordance with the numbers of the divisions and corps printed on the map.
French forces enter the map from the western side of the battlefield in accordance with the diagram of corps entry prepared by the French player. Entering forces are not required to appear only along roads.
"Fog of War": By mutual agreement, both sides may use "fog of war" (see rule 8.9). In this case, both sides receive dummy counters.
The Russian player has the right to flip his units over in any hexes on the map other than those west of hex row 12xx (inclusive).
The French player has the right to enter his forces from any hex on the western edge of the map.
First turn: The French player goes first.
Poor maneuvering: In order to reflect the low quality of maneuvering of the Russian forces (the presence in the forces of a great number of newly arrived recruits and militia), the Russian player rolls a die at the beginning of his turn. The result indicates the maximum number of counters that the Russian player may move this turn. However, in any given turn he may move at least 5 of his counters.
25 August: Although the Russians intended for the battle to take place on 25 August, nevertheless Napoleon, seeing that the Russians were at last prepared to give battle and were not leaving their positions, gave his army one day of rest.
On Game Turn 4, both sides are not allowed to fight or to enter each other's ZOC. If units are in enemy ZOC at the start of their turn, they are obligated to leave it in their movement phase. Artillery fire is also prohibited during this turn.
Victory conditions:
- French decisive victory: 17+ VP in the French player's favor
- French tactical victory: 9-16 VP in the French player's favor
- Draw: 1-8 VP in the French player's favor
- Russian tactical victory: 0-8 VP in the Russian player's favor
- Russian decisive victory: 9+ VP in the Russian player's favor
Abbreviations on the Counters
French army:
- Ит Гв – Italian Guard
- Ст Гв – Old Guard
- Мл Гв – Young Guard
- Гв – Guards
- I, II, III, IV кк – I, II, III, IV Cavalry Corps
Russian army:
- Гв. бригада – Guards Brigade
- Е. Вюртемб. – Evgeniy Wuertembergskiy
- Гр – Grenadier (division)
- Св Гр – Combined Grenadier (division)
- кир – Cuirassier (division)
- I, II, III, IV кк – I, II, III, IV Cavalry Corps
- Моск. ополч-е – Moscow militia
Editor's note: the abbreviations are printed in Russian on the counters. The source gives them with English glosses, which are transcribed here; the Cyrillic forms are kept beside them.
Glossary
Combat units – Counters representing actual military units. Information is printed on the counters about unit names and formations, their types, and their combat characteristics.
Hexagon – A six-sided space on the game map. A grid of hexagons is placed on the map and allows for the regulation of the movement of units and the precise determination of the type of terrain in which a unit is located.
Zone of Control (ZOC) – The six hexes surrounding the hex in which a combat unit counter is located. A zone of control affects the movement, combat, and supply of units.
Die – The playing die, which plays a role in generating random numbers in the game.
Markers – Extra counters that serve as reminders about various game actions or as indicators of the status of combat units.
Modifiers – The number of points that should be added to or subtracted from the result of a die roll. I.e., this is a "plus" or a "minus" to the die roll.
Shifts – These apply to the Combat Results Table. On the table there are columns of combat strength ratios. The use of a "shift" allows the player to change the column either for the worse or for the better.
Designers' Notes
The operation around Borodino lasted for three days. In preparing to give battle, Kutuzov covered the New Smolensk Road and occupied a position on the high, steep bank of the Kolocha River. Thus he first of all secured for himself a path of retreat, while the flanks of his position were not well-secured – on the left wing passed the Old Smolensk Road, and on the right, along the other bank of the Moscow River, passed the Gzhatsk Highway. Expecting a strike, the Russian army was deployed to repel a French attack on any sector. Considering that the New Smolensk Road was the most important of all – it was the Russian army's line of communications – it was the one that was covered by the main Russian forces, Barclay's 1st Western Army. The left flank was defended by the numerically much weaker 2nd Western Army of Bagration. When in the actual battle the main French strike came against the weakly defended left wing, Kutuzov was immediately forced to begin shifting troops over from the unattacked right flank toward Bagration. In fact the Russian army before the start of the general battle found itself in the position of a goalkeeper facing a penalty kick – the strike could come at any angle. Considering the Russians' low aptitude for maneuvering large bodies of troops on the battlefield, when compared with the French, the Russians might not have time to reinforce at the right location.
In reality, the maneuvering of the Russian troops took on a chaotic character. The reserves failed to arrive, and the Russian command was forced to use its Guards quite early. Nevertheless, the French throughout the whole battle maintained superiority of strength over the Russians on the left wing. Taking into account Napoleon's special flair for maneuvering artillery, the French inflicted greater losses on the Russians and dislodged them from the majority of key locations.
This game offers players the opportunity to model the situation at Borodino at an operational level. Both the French and the Russian players can deploy as they deem necessary. The Russian player can strengthen with fortifications those points that he considers most threatened, and they don't have to be positioned where they were in the actual battle. Experienced players can try playing with the "Fog of War" variant, where neither side can determine for certain where or how the enemy is concentrating his forces.
We expect this game will allow the Battle of Borodino, a battle both compact and not so gripping in terms of the tactical art, to be made more interesting by enhancing the opportunities for player choice at the expense of more protracted and varied preparation of the place and time of the battle.
Combat Results Table
Column headings are the combat strength ratios; the die roll (0 is read as 10) selects the row. Results: A – applies to the attacker; D – applies to the defender; 1 – losing side retreats one hex; EX – Sustained Fighting (exchange); Def – Defeated. See rule 7.7.
| Die Roll | 1:3 | 1:2 | 1:1 | 2:1 | 3:1 | 4:1 |
|---|---|---|---|---|---|---|
| 1 | A-Def | A-Def | A-Def | A-Def | A-Def | EX |
| 2 | A-Def | A-Def | A-1 | A-1 | A-1 | D-1 |
| 3 | A-Def | A-1 | A-1 | A-1 | EX | D-1 |
| 4 | A-Def | A-1 |
Cooperation of Troop Types
| Stack Composition | Capabilities |
|---|---|
| Arty. + any other unit (Artillery support) | One extra shift in the player's favor on attack or defense. |
| Arty. + Arty. (Battery) | May conduct independent artillery fire at a range of 2 hexes (not counting the firing units' hex). The player rolls the die. On a result of 8+, the target enemy stack loses one unit. In order to fire, the firing stack must have a line of sight to the target. |
| Arty. + Arty. + Arty. (Grand Battery – French player only) | May conduct independent artillery fire at a range of 2 hexes (not counting the firing units' hex). The player rolls the die twice. For each roll of 8+, the target enemy stack loses one unit. May fire at 2 different hexes; in this case, the player rolls the die once for each hex. In order to fire, the firing stack must have a line of sight to the target. |
| Cav. + Cav. (Breakthrough) | If the attacker achieves a "retreat" or "defeated" result against the enemy, surviving enemy units retreat 3 hexes (on an "elimination check" roll of 8+, one unit is eliminated). The cavalry units may pursue along the path taken by the losing side, ignoring enemy ZOC. This rule also applies to cavalry on defense (i.e., defending cavalry may get a breakthrough if the attacker gets a result of A-1 or A-Def). |
| Inf. + Cav. + Arty. (Combined attack or defense) | The player may reroll the die when attacking or defending – use the result of the second die roll. When both sides qualify, there is no reroll. |
| Guards | If in a combat a player uses units with a star symbol, he is entitled to roll an additional die on the CRT and choose the result that is better for him. Each star symbol provides 1 additional roll. The use of guards on both sides in a combat cancels the indicated effect on the basis of one star for one star. Note that each time your guards participate in combat, your opponent receives victory points. |
Terrain Effects Chart
| Terrain | Effect on Movement | Stacking Limit | Effect on Combat |
|---|---|---|---|
| Open | 1 | 3 | None |
| Brush | 2. No artillery or supply wagon movement | 2 | May fire into but not through. Cavalry may not attack infantry. Cavalry CS = 1 |
| Woods | 4. Only infantry allowed | 1 | No ZOC. May not fire into or through. Cavalry may not attack infantry. |
| Village | 1 | 3 | None |
| Stream | +1 | - | 1 shift in favor of defender unless outflanked. |
| Heights (hill) | 1 | 2 | 1 shift in favor of defender. May fire into but not through. |
CS = Combat Strength. OT = Depends on other terrain in hex.
* If the attacker conducts an attack, he must make "diversionary" attacks against all adjacent enemy units (see rules 6.1 and 6.4).
Effects on combat are in favor of units defending in a hex with that terrain type.
Victory Points Summary
- 1 VP – for each defeated infantry unit removed from the game
- 2 VP – for each defeated cavalry unit removed from the game
- 4 VP – for each artillery unit removed from the game
- 10 VP – for each supply wagon unit removed from the game
- 5 VP – for each defeated guards unit removed from the game (units with one elite star)
- 10 VP – for each defeated Old Guard unit removed from the game (units with two elite stars)
- 1 VP – for exiting a French combat unit (other than a dummy counter, artillery, or supply wagon) through the exit zone on the eastern (Russian) side of the map
- 1 VP – for each captured (removed by the end of the game) Russian fortification
- 1 VP – for each combat in which enemy guards units (one star) participate
- 2 VP – Russian player only, for each combat in which enemy Old Guard (two star) units participate
Sequence of Play
A. First Player Turn
- Movement Phase
- Combat Phase
- 2.1 Skirmisher Retreat
- 2.2 Pursuit by Skirmishers
- 2.3 Artillery Fire of Batteries and Grand Batteries
- 2.4 Combat
B. Second Player Turn
C. End of Turn