Armoured Clash
Armoured Clash Rulebook
Table of Contents
Table of Contents
What You Need to Play
Before you can enjoy your games of Armoured Clash, you will need to gather together the following items.
Miniatures. Armoured Clash utilises 10mm-scale high-quality resin and plastic miniatures, all of which are lovingly designed and manufactured by Warcradle Studios.
Battlefield and Terrain. Armoured Clash works best on a Battlefield littered with a variety of terrain that is compatible with 10mm-scale miniatures (1:160 scale terrain features work particularly well). Warcradle Studios offers a range of products that are ideal for this purpose.
Attack Dice. Games of Armoured Clash use special Attack Dice that have custom faces. It is suggested that players have between 20 and 30 Attack Dice when playing this game. A full guide for Attack Dice and their function is provided later in this book.
Tokens and Markers. Tokens and Markers are essential for games of Armoured Clash, as they denote important information, such as Unit Statuses and Strategic Objectives. Tokens are small, card disks that depict the symbols of the different unit statuses found in this book. Markers are 50mm plastic circles that are placed on the Battlefield to denote Strategic Objectives.
Command & Conquest Cards. Each General must have a single, complete deck of 60 Command & Conquest Cards that they can draw from during the game. Command & Conquest Cards allow Generals to issue Commands, claim Conquest Objectives, claim the Initiative, make Special Commands and make Discipline Tests.
Measuring Devices. All measurements in Armoured Clash are made using inches (”). Players should, therefore, have a Range Ruler, tape measure or some other form of measuring device that has inches clearly marked. Some units in the game also require a special Turning Template for moving in curved arcs. Range Rulers and Turning Templates can be found in many of the larger Armoured Clash box sets.
Orders of Battle (ORBATs). Orders of Battle (ORBATs) are compendiums of information about a single Faction, including Battlegroups, Unit Profiles, Points Costs, and more. These documents provide Generals with more information about their Faction, show them how to build and field Forces composed of Battlegroups, allow them to understand how their units function on the Battlefield, and to play new and exciting Clash types with their miniatures. ORBATs are digital documents that can be found on the Armoured Clash website (www.armouredclash.com).
Designer's Note: Living Documents. As ORBATs are 'living documents' that are often updated and revised in light of new releases and balance changes, any Unit Profiles used as examples in this book might not reflect those found online. Indeed, the information present in the most recent version of the Faction's ORBAT takes precedence over any conflicting information found in any other source. It is therefore advised that players keep up to date with the latest versions of the relevant ORBATs in order to receive the most benefit from their models. Warcradle Studios regularly alerts players to any ORBAT reworks through announcements on its website, through official social media channels and via other electronic messaging services.
Other Useful Items. Whilst not essential, a notepad can often help with remembering important information during a game. A laser pointer can also be useful when determining Line of Sight. A worthy opponent and an enthusiasm for fair play can also make the experience all the more enjoyable!
Designer's Note: Reading this Book. The Armoured Clash rulebook is written with two aims: first, to teach the rules of the game to a new General, and second, to act as an in-game reference manual. When you read this book from start to finish for the first time, new concepts should be introduced in an order that makes it as easy as possible to learn the game. When a rules term is used that is explained in more detail elsewhere, it will look like this (with a page reference). The back of this book features an Index, to help with looking up rules during a game, and a quick reference summary to save flicking back and forth to commonly used rules.
Core Concepts
This section introduces some basic principles that are required to understand the game's rules.
Designer's Note: Civil Conduct. In a game as detailed as Armoured Clash, it is impossible for the rules to cover every single eventuality. Should a situation arise which is not clearly covered, apply common sense and see if a consensus can be reached. Failing that, flip a coin to decide how it should be resolved, and move on as quickly as possible. Exhaustive research and impassioned debate can come later, after the game has come to a conclusion.
Tabletop wargames are best enjoyed in a spirit of friendly competition, and the only conflict should be taking place between the units on the Battlefield. Each General should always do their best to ensure that their opponent is having an enjoyable time, no matter how badly their Force is performing.
Overview of a Game
A game of Armoured Clash usually takes place between two Forces, each of which is commanded by a player. Throughout the rules, players are referred to as Generals.
Before playing, the Generals will agree on a Force Scale:
- SKIRMISH is for small Forces and fast games.
- BATTLE is the standard game size.
- CATACLYSM is an epic conflict between two large Forces.
They will also choose a scenario, called a Clash. Each Clash provides setup instructions, objectives and special rules - victory is rarely a simple matter of annihilating the enemy.
The Battlefield. The area on the tabletop in which the game takes place is called the Battlefield. This is a rectangular area, at least 36" on each edge - but usually at least 48" on each edge.
During setup, each General claims one edge of the Battlefield. This is referred to as their Rear Edge.
The Battlefield should feature a good amount of terrain, to break up sight lines and provide strategic decisions for each General. Rules for setting up a Battlefield can be found in Preparing to Play.
Deployment Zones. Each General has a Deployment Zone, usually protruding from their Rear Edge of the Battlefield. This is where their Force is deployed at the start of the game, and where additional units can enter during play.
Ending a Game. Each Clash determines how many Rounds a game will last for. During the game, each General will score Victory Points, and the General with the most points at the end of the game is declared a winner.
Basic Principles
The following principles apply throughout the rest of the game's rules.
Models and Units. In Armoured Clash, each General controls a Force made up of detailed plastic and resin miniatures, referred to as Models. A model might represent a group of infantry or cavalry mounted together on a single plastic base, a field gun and its crew, an armoured vehicle, or something similar.
However, gameplay is rarely concerned with individual models. Instead, models are grouped together into Units, each containing a number of models of the same type. All of the models in a Unit move and fight together for the entire game... or at least, until some of them are destroyed and removed from play.
Officers. Although all models in a Unit must be of the same type, one model in the Unit must always be its Officer. A Unit's Officer should be clearly identifiable by both Generals at all times. (If a Unit comprises a single model, it is always an Officer.)
Figure captions: a standard bearer is a clear way of showing that a model is an Officer. A painted example shows ways to indicate the Officer in an Armour unit.
Footprints. When it becomes necessary to pinpoint a model's exact position, the model's Footprint is used. A model is assumed to occupy the entire area of its Footprint.
If a model is supplied with a base, the base defines its Footprint, even if some parts of the miniature itself extend past the base's edge. (A Galahad's side sponsons do not count towards its Footprint.)
If a model is not supplied with a base, the main body of the model, as viewed from above, defines its Footprint. Any protruding features that are not at ground level (for example, gun barrels, antennae or superstructural gantries) do not count towards a model's Footprint. (A Mordred's gun barrel does not count towards its Footprint.)
If a model's Footprint is unclear, both Generals should agree on how it should be defined during setup.
Modifiers. If two models are placed so that their Footprints are touching, they are In Contact. This is most commonly seen in units that are arranged in Close Formation, or when two units engage in a Close Quarters Combat.
A model can never be placed so that its Footprint overlaps that of another model.
Figure captions: the Galahad cannot be placed here, as its Footprint would be overlapping the Fangun's Footprint. In this example, the Galahad and Fangun are In Contact as their Footprints are touching.
Size. Units in Armoured Clash range from rank-and-file foot soldiers to colossal landships. To represent this, each Unit has a Size, as shown on its Profile. Pieces of Terrain can also have a Size, which is added to the Size of any models that are situated on that Terrain.
Size is mainly used when units open fire on the enemy, where it determines whether intervening units and terrain will obscure or block their attacks.
Arcs. Each model has four 90° Arcs as shown in the diagram: Front, Left Flank, Right Flank and Rear.
A model's Arcs extend outwards from its centre point. If the model is mounted on a base, use the centre point of the base. Otherwise, trace two imaginary lines that split the model as symmetrically as possible from front to back, and from left to right. The point where these intersect is the centre point.
Measuring Distances. All distances are measured in inches ("). They can be measured using the Range Ruler (which has Navigation Points marked in one-inch increments), or a tape measure. The Turning Template is used when moving especially ponderous models, representing their decreased manoeuvrability.
When determining whether two models are within a certain distance of each other, measure to and from the closest points on each model's Footprint. When measuring the distance between two units, measure between the closest models in each unit.
If the rules state that a model must be "fully within" a certain distance of another model or point on the Battlefield, it means that every part of the model's Footprint must be within that distance.
When moving a model, choose a reference point - for example, the front of the base - and ensure that the distance moved is measured to and from this same point. Generals are free to measure distances whenever they like.
Figure captions: the distance between these models is measured from the closest point on each model's Footprint (Fig. 1). When moving this model, the General measures to and from the same point at the front of its base. Ruler sections combine to create the Range Ruler; by aligning these markings, the Range Ruler can be set to a 90° angle, which is useful for checking a model's Arcs.
Unit Profiles
Each Unit listed in an ORBAT has its own Profile, listing its Attributes, Armaments, Traits and Special Rules.
A Profile is broken into several parts: the Faction Pennant, the Unit Name/Type, the Unit Image, the Key Information, the Attributes, the Armaments Grid, the Traits and the Special Rules.
Key Information. This section shows the Unit's Size and Target Category, along with the Unit Strength (how many models it has when it is deployed) and Victory Points Rating (VPR) for the Unit determined by its Reinforcement Level.
Attributes. A Unit's Attributes are used throughout a game, each with its own purpose:
- SPEED (listed in inches) determines how far the Unit can move.
- DEFENCE shows how well-armoured the Unit is, compared to other units of its type.
- DAMAGE LIMIT determines how much Damage the Unit can take before it loses a model.
- DISCIPLINE shows the Unit's training and willpower.
- BREAK LIMIT shows how small the Unit must be before it is at risk of Breaking.
Modifiers. Some rules can modify a Unit's Attributes. Modifiers are always temporary unless the rule specifically states otherwise. An Attribute can never be reduced below 1.
For example, if the Forced March Command is played on a Unit, its Speed is only increased by 2" for the duration of the Movement step, after which the modifier stops applying.
Most modifiers increase or decrease an Attribute by a fixed amount, while others multiply (or divide) an Attribute.
Multiple modifiers can be applied at the same time. If an Attribute would be multiplied more than once, only the highest multiplier is applied. Then, after any multiplier has been resolved, any fixed modifiers are applied.
Example: Multiple Modifiers. A Unit that has had the Forced March Command played on it makes a Double Time manoeuvre, which lets it move a number of inches up to double its Speed. First the Speed is doubled, then the result is increased by 2".
Armaments Grid. The Armaments Grid shows the different types of attack that can be made by the Unit. Each row on the grid represents a different type of attack.
Attack Types. Ranged Attacks are listed by Target Category. Most units have one row for targeting Light enemies, another for targeting Heavy enemies, and a third for targeting Aerial enemies - but some units may only have one or two of these, or even no Ranged Attack at all. Close Quarters Attacks can vary from unit to unit. For example, Infantry and Cavalry units usually have a Melee attack, while Armour units usually have an Impact attack.
Attack Attributes. Each row lists the following Attributes for its attack:
- Range is shown in two parts, Short Range and Long Range. Each is listed in inches. Attacks can target enemy units within their Long Range, and attacks targeting enemies within their Short Range will have increased effect. Close Quarters Attacks do not have a range.
- Attack Dice shows how many Attack Dice are rolled when making the attack. This Attribute has three columns, each of which is used for a different number of attacking models.
- Qualities are additional rules that apply when making the attack. A full list of Qualities can be found in the Glossary of Rules & Qualities, which can be found in the Resources section of the Armoured Clash website (and is reproduced in this book's companion section).
Traits and Special Rules. A Unit's Traits show its Faction, Unit Type and Target Category. Some rules will only apply to models which have certain Traits; for example, only units that have the Infantry type can garrison buildings.
Special Rules allow the Unit to bend or break the core rules of the game in some way. As with Qualities, a full list can be found in the Glossary of Rules & Qualities.
Unit Coherency
All models on the Battlefield are formed into Units. A Unit consists of one or more models of the same type, as detailed in its ORBAT.
All Units fight in either Close Formation or Open Formation, usually determined by their Unit Type.
When a Unit is deployed, and whenever it moves, it must adhere to the Unit Coherency for its Formation type as described below.
When models in the Unit are destroyed, it is possible that models can find themselves out of Unit Coherency. If the models are not back in Unit Coherency by the end of their next Activation, they will be Abandoned.
Close Formation. Most Infantry, Cavalry and Field Gun units fight in Close Formation.
A Unit in Close Formation is organised into ranks. Each model must be facing in the same direction, and must be In Contact with the models either side of it. Each model that is not in the front rank must be positioned directly behind a model in the rank in front of it.
A rank can be any number of models wide, but each rank must have the same number of models. The rear rank is an exception, and can have fewer models than the ranks in front of it.
The Unit's Officer must be placed as close as possible to the centre of the front rank. All other models in the Unit must be placed within 3" of the Officer.
Figure caption: this Unit has two ranks, with three models in each rank. The Officer is positioned front and centre.
Arcs (Close Formation). A Unit in Close Formation has arcs, in the same way that a model does. Whereas a model's arcs extend outwards from its centre point, the arcs of a Close Formation Unit extend out from its corners at a 45° angle. Treat the rear rank as complete, even if it has fewer models than the other ranks.
Incomplete Rear Ranks. If the last rank of a Unit in Close Formation has fewer models than the ranks in front, any models in that rank must be placed so that they are In Contact with each other, and each one is directly behind a model in the rank in front.
Open Formation. Most Armour, Artillery and Rotorcraft units fight in Open Formation.
All models in an Open Formation Unit must be placed within 3" of the Unit's Officer.
Arcs (Open Formation). Each model in an Open Formation Unit uses its own Front, Flank and Rear arcs.
Unit Movement
In a round, a General has the chance to move each of their Units around the Battlefield. In addition, some rules can force a General to move their Units, even if they do not wish to.
The following rules apply whenever a Unit moves.
Movement Limit. Any rule that allows a Unit to move will give a maximum distance that it can move. This is its Movement Limit. For example, the Advance Manoeuvre allows a Unit to move a number of inches up to its Speed rating.
Some rules will give a fixed distance for movement. For example, when a Unit Falls Back, it has to move a full 3".
Moving a Unit. To move a Unit, move each model up to the Unit's Movement Limit. A model can move in any direction, and can be turned to face any direction at the end of the move, unless a rule specifically states otherwise. Movement is measured in straight lines, but can be broken down into multiple smaller moves, changing direction between them.
During this move, no model in the Unit can move within 1" of an enemy Unit, unless this is explicitly permitted by its manoeuvre. (For example, a Charge Manoeuvre allows a Unit to end its move in base contact with an enemy Unit.) Models can move through any and all friendly models freely, but must end the move so that their Footprints are not overlapping. Models cannot move through enemy models.
At the end of a Unit's move, all models must be placed so that they obey the rules for Unit Coherency.
Ponderous Movement. If a Unit has the Ponderous special rule, its models cannot rotate on the spot. Instead, they use the Turning Template to turn as they move.
Using the Turning Template: place it so that its first Navigation Point is aligned with the model's Centre Point, as shown in the book's example. Then, move the model forwards (or backwards) along the Turning Template. Each time its Centre Point reaches a new Navigation Point, the model can rotate so that it is aligned with the next Navigation Point. (It can rotate to a lesser degree, if the General wishes.)
Unit Statuses
During play, a Unit can gain one or more temporary effects called Statuses. For example, a Unit might gain the Suppressed status after suffering losses to enemy fire, which will reduce its effectiveness until the end of its next Activation.
Each Status has a corresponding Token, which can be placed next to the Unit as a reminder that it is currently under the effect of the Status.
A Unit can have more than one Status at a time, but can only have each Status once; if it would gain the same Status again, there is no effect (unless a rule specifically states otherwise).
Target Acquisition
Units can only make Ranged Attacks against enemy Units that are visible to their Officer. The process for checking this is called Target Acquisition.
To confirm Target Acquisition, make the three checks listed below. If the outcome of any check is that Target Acquisition cannot be confirmed, the enemy Unit cannot be chosen as the target of a Ranged Attack.
- Check Armaments. If the attacking Unit's Armaments Grid has a Ranged Attack row that matches the enemy Unit's Target Category, Target Acquisition can be confirmed. This row must be used for the duration of the attack.
- Check Visibility. If the attacking Unit's Officer can draw Clear or Obscured Line of Sight to at least one model in the enemy Unit, Target Acquisition can be confirmed. Target Acquisition cannot be confirmed if any models in the enemy Unit are In Contact with friendly models.
- Check Range. On the attacking Unit's Armaments Grid, check the Long Range of the attack that matches the enemy Unit's Target Category. Then, measure the distance from the attacking Unit's Officer to the closest model in the enemy Unit. If the distance to the target is within the attack's Long Range, Target Acquisition can be confirmed.
Checking Line of Sight. To check Line of Sight from one model to another, trace an invisible line from the centre point of the first model to the centre point of the second model.
- If the line leaves the first model's Front Arc, or if it passes through any Blocking Terrain, or through more than 3" of Dense Terrain, Line of Sight between the two models is Blocked.
- Otherwise, if the line passes through any other models (not counting models that are in the same Unit as either model that Line of Sight is being drawn between), or through up to 3" of Dense Terrain, Line of Sight between the two models is Obscured.
- If the line does not pass through any terrain or other models, Line of Sight between the two models is Clear.
Benefits of Size. When determining Line of Sight for a model, intervening enemy models and terrain are ignored if their Size is lower than the Size of either of the models that Line of Sight is being drawn between.
Command & Conquest Cards
Designer's Note: Command or Conquest? The cards in your hand are a valuable resource. Commands give you powerful options to bend the rules of engagement in your favour, but issuing one means sacrificing potential Victory Points. Similarly, scoring frequent Conquest Objectives can help you achieve victory... but doing so means missing out on Commands.
Each General has their own Deck of Command & Conquest cards (these are sometimes referred to as C&C Cards).
During setup, each General shuffles their deck and places it face-down next to their edge of the Battlefield. They will Draw cards from their deck to create a Hand, from which they can Play cards. Whenever a General Discards a card, they place it in a face-up Discard Pile next to their deck.
A General only ever interacts with the cards in their own deck.
Anatomy of a Card. A Command and Conquest card has three elements:
- A COMMAND, which can be issued to a Unit to give it a temporary benefit.
- A CONQUEST OBJECTIVE, which can be claimed to score Victory Points.
- A CARD VALUE between 1 and 12.
The card also shows its version and card number, the 'Command' and 'Conquest' section titles, and which section of the card is which.
Cards that are in a General's Hand can be played to issue Commands, claim Conquest Objectives, or Interfere with Commands that their opponent issues. After a card has been played, it is discarded.
Errata (v1.04): "Deny" Conquest Objective. The Conquest Objective "Deny" on cards 38, 44, 51 and 59 awards a Victory Point for Suppressing an enemy Unit with Opportunity Fire, which is not possible. Its text is changed to: "Play this card when you Destroy an enemy model with Opportunity Fire. Score 1 Victory Point."
Communications Breakdown. If a General's Command & Conquest deck runs out, they have suffered a breakdown in communications. The General immediately shuffles their Discard Pile and places it face-down to create a new Deck. However, for the rest of the game, they can no longer draw cards from the Deck into their hand. This means that their supply of Commands and Conquest Objectives has run dry, but they still draw cards from their Deck as normal to determine the outcome of Tests.
Discipline Tests
Designer's Note. A battlefield is a chaotic environment, and soldiers can be unpredictable. Whenever a Unit's discipline is in doubt, the rules will call for a Discipline Test.
The Better Part of Valour. To make a Discipline Test for a Unit, the General reveals a Command & Conquest card from their deck and compares its Card Value to the Unit's Discipline rating:
- If the Card Value is equal to or lower than the Unit's Discipline, the Unit succeeds at the test.
- If the Card Value is higher than the Unit's Discipline, the Unit fails the test.
The rule that prompted the test will explain what happens in the case of success or failure. If the rule only lists an outcome for success, failure has no effect - and vice versa.
The card that was drawn is then discarded with no effect.
Designer's Note. Voluntarily failing a Discipline Test might seem strange at first, but it does have its uses. For example, a General may decide that it is better for their Unit to Fall Back from the enemy, or they might elect to let a heavily damaged Unit scatter rather than waste a card from their deck and invite Communications Breakdown later in the game.
Voluntary Failure. Instead of taking a Discipline Test, a General can declare that they will voluntarily fail the test. If they do, they do not draw a card; the Unit simply fails the test.
Suppression Tests and Rally Tests. Suppression Tests and Rally Tests are the most common types of Discipline Test. Each has its own set of outcomes for success and failure. If a Special Rule applies to Suppression Tests or Rally Tests, it does not apply to other types of Discipline Test; however, rules that apply to Discipline Tests do apply to Suppression Tests and Rally Tests.
For example, the Stand Firm Command card applies to all Discipline Tests, including Suppression and Rally Tests. The Armoured Might card only applies to Suppression Tests, and not Rally Tests or other Discipline Tests.
Round Overview
A game of Armoured Clash takes place across a series of Rounds, each of which is broken into three consecutive phases: the Ready Phase, the Activation Phase and the End Phase.
Once a phase is complete, the next phase begins. When the End Phase is complete, a new Round begins. If the Clash's Round Limit has been reached, the game ends instead.
Each Phase is detailed in its own section, starting below.
The Round Tracker Dial can be used to keep track of the current Round. It can also be passed from General to General to show who currently has the Initiative.
The Ready Phase
The Ready Phase is split into three consecutive steps:
- A. Determine Initiative - The Generals determine who will take the first turn.
- B. Draw Cards - The Generals replenish their hand of Command & Conquest cards.
- C. Deploy Reserves - The Generals have the chance to bring additional Units into play.
A. Determine Initiative. This step is skipped in the first Round, as the Clash determines which General takes the first turn.
The General who still has the Initiative from last Round chooses a Command & Conquest card from their hand, and places it face-down in front of them. The higher the Value of the card, the more likely they are to retain the Initiative this Round.
Then, their opponent does the same, and both cards are revealed. The General whose card has the highest Card Value takes the Initiative for this Round. In the case of a tie, the Initiative goes to the General who did not have the Initiative in the previous Round.
Surrendering the Initiative. Instead of choosing a card, either General can Surrender the Initiative. (If a General has no cards, this is their only option.) Surrendering the Initiative counts as playing a card with a Value of 0. If the second General Surrenders the Initiative, the first General takes their chosen card back into their hand.
Designer's Note: Waste Not, Want Not. It can be tempting to discard cards during this step because they don't seem immediately useful, but exercise caution! Once you discard a card, you won't get another chance to use its Command or Conquest effect; what's more, you're depleting your deck. In longer Clashes - especially in Battles and Cataclysms - a foolhardy General runs a real risk of catastrophic Communications Breakdown in later Rounds.
B. Draw Cards. First, each General can discard any number of Command & Conquest cards from their hand. Then, each General draws Command & Conquest cards from their deck, until the number of cards in their hand matches their Hand Limit, as determined by the Force Scale.
| Force Scale | Hand Limit |
|---|---|
| Skirmish | 4 |
| Battle | 5 |
| Cataclysm | 6 |
C. Deploy Reserves. During setup, Generals can hold back some of their Units, keeping them in Reserve so that they can arrive later. This step is skipped in the first Round, and in later Rounds if neither General has any Units in their Reserve.
Starting with the General who has the Initiative, the Generals alternate Deploying one of their Units that is in Reserve. A General can stop deploying Units whenever they wish. Then, their opponent deploys as many remaining Units as they wish.
Once neither General has any more Units to deploy (or does not wish to deploy any more Units), the Ready Phase ends and the Activation Phase begins.
Deploying a Unit from Reserve. When a Unit is deployed from Reserve, it must be placed onto the Battlefield so that it is entirely within its Deployment Zone, and so that at least one of its models is in contact with a Battlefield edge.
Lost Opportunity. In the final round of a Clash, Reserves cannot be deployed. Any Units that are still in Reserve at this point will take no part in the battle.
Special Command: Flank Attack. Flank Attack is a Special Command that a General can give to a Unit when it is deployed from Reserve. If the Command is successfully issued, the Unit can be placed outside of its own Deployment Zone. One model must still be in contact with a Battlefield edge, and no models can be within the enemy Deployment Zone. If the Command fails due to Interference, the General can choose to keep the Unit in Reserve, or deploy it using the standard rules. Special Commands are an advanced rule, and are explained later.
The Activation Phase
In the Activation Phase, all of the Units on the Battlefield have a chance to move and attack. To do this, the Generals take turns activating their Units, starting with the General who has the Initiative.
On a General's turn, they Activate one of their Ready Units (one that does not have the Activated status), following the rules in Activating a Unit. The Unit then gains the Activated status.
Once all of a General's Units have been activated, they cannot take any more turns. Their opponent takes all of their remaining turns, one after the other, and then the End Phase begins.
Activated Units. An Activated Unit cannot be activated again this Round. A Unit that has not been Activated is Ready. In the End Phase, all Units return to being Ready.
Abandoned Models. At the end of a Unit's Activation, all of its models must be within Unit Coherency. Any models that are not within Unit Coherency are Abandoned, and removed from play. These models count as having been Destroyed.
Coordinated Units. Some Units can coordinate their actions with other Units - for example, a Transport Unit and a Unit it is transporting. When Units are Coordinated, they can be activated in the same turn, one after the other. The General chooses one Unit in the group and Activates it, then chooses another, and so on. The General does not have to Activate all Coordinated Units in the same turn, if they do not wish to do so.
Zero Ground Presence. If a General has no Units on the Battlefield in the End Phase, they have Zero Ground Presence. Their opponent scores 5 Victory Points, then the game ends immediately, even if the Round Limit for the Clash has not yet been reached.
The End Phase
In the End Phase, all Units lose the Activated status, and return to being Ready.
Then, the Generals score any Victory Points listed under the Objectives section of the Clash.
Finally, any other rules or effects that take place in the End Phase are resolved. If two or more rules would resolve at the same time, the General who has the Initiative decides the order in which they are resolved.
When this is done, the End Phase is over, and the Round ends. If the Round Limit for the Clash has been reached, the game comes to an end. Otherwise, the next Round begins.
Victory and Defeat
When a Clash ends, each General totals the Victory Points they have scored, and a victor is determined:
- The General with the highest total has achieved a Victory, while their opponent has suffered a Defeat.
- If the victorious General has scored at least twice as many Victory Points as their opponent, they achieve a Devastating Victory and their opponent suffers a Devastating Defeat.
- If both Generals have scored the same number of Victory Points, the game ends in a Draw, and no victor is declared.
Activating a Unit
Rally Tests. If a Unit is Suppressed when it is Activated, it must make a Rally Test. This is a type of Discipline Test. If the test is passed, the Unit can be activated normally. If the test is failed, the Unit can use either its Movement Step or its Attack Step, but not both. In either case, the Unit remains Suppressed until the end of its Activation, at which point it loses the Status.
Reduced Capability. Suppressed Units which have failed the Rally Test at the start of their Activation cannot use both their Movement Step and Attack Step. As such, they cannot make Double Time or Charge manoeuvres.
When a General activates one of their Units, they can move the Unit, and make an action with it.
A Unit's Activation is broken into four consecutive steps:
- A. Reaction Step - The opposing General has a chance to declare Opportunity Fire against the active Unit.
- B. Movement Step - The active Unit makes a Manoeuvre, which usually lets it traverse the Battlefield.
- C. Reaction Step - The opposing General has a second chance to declare Opportunity Fire, if they have not already done so.
- D. Attack Step - The active Unit makes an Attack Action.
The Reaction Steps
Each Activation has two Reaction Steps, one before the Movement Step and one after it. During either of these steps, the opposing General can declare Opportunity Fire with one of their Units that is On Lookout, as described below.
Opportunity Fire. During one of the Reaction Steps, the opposing General has a chance to declare Opportunity Fire with one of their Units. This lets the Unit make a Ranged Attack against the active Unit, either before or after it moves. Opportunity Fire can only be declared once per Activation; if a General uses the first Reaction Step, they cannot use the second one.
Opportunity Fire Conditions. Opportunity Fire can only be declared with a Unit which is On Lookout, and which can confirm Target Acquisition on the active Unit.
Resolving Opportunity Fire. To resolve Opportunity Fire, the Unit makes a Ranged Attack against the active Unit, then the Unit loses its On Lookout status. Unlike a standard Ranged Attack, the target Unit cannot be Suppressed as the result of Opportunity Fire.
The Movement Step
In this step, the General can resolve a Manoeuvre with the Unit, chosen from the list below.
Outflanking. If the target of a Charge manoeuvre is in Close Formation, and the attacking Unit's Officer is outside the target's Front Arc before charging, the target is Outflanked. This will grant a Combat Rating Bonus during the Attack Step.
- Advance. Move each model in the Unit a number of inches up to the Unit's Speed.
- Double Time. Move each model in the Unit a number of inches up to twice the Unit's Speed. A Unit that makes a Double Time manoeuvre also uses up its Attack Step, so cannot make an Attack or Special Action in that step.
- Charge. This Manoeuvre can only be made by a Unit with a Melee or Impact attack on its Armaments Grid. Choose an enemy Unit to which the active Unit has Clear or Obscured Line of Sight, and which is not an Aircraft or Rotorcraft Unit. Then, move the active Unit a number of inches up to twice its Speed, ending the move so that the active Unit's Officer is in contact with the chosen Unit, and the chosen Unit is in the Officer's front arc. If this cannot be achieved, a Charge Manoeuvre cannot be made against that enemy Unit.
- Impeded Charges. If any model in a Unit moves through Difficult Terrain or across an Obstacle when making a Charge manoeuvre, the target Unit will have a Defensive Advantage during the ensuing Close Quarters Combat.
- Aim. The Unit does not move. Instead, if it makes a Ranged Attack this turn, it will gain a Combat Rating Bonus.
- Disembark. This Manoeuvre can only be made by Embarked Units. The Unit Disembarks from its Transport Unit.
- Exit. This Manoeuvre can only be made by Garrisoned Units. The Unit Exits the Defensible Building it has Garrisoned.
The Attack Step
In this step, the General resolves a Ranged Attack or Close Quarters Attack with the active Unit. Alternatively, they can resolve a Special Action with the active Unit.
A Unit that is in contact with an enemy Unit must make a Close Quarters Attack at this step.
Exposed Models. When confirming Target Acquisition, any models in the target Unit to which the attacking Unit's Officer can draw Clear Line of Sight are Exposed. If some (but not all) of the models in the target Unit are Exposed, the attacking General can declare that the attack will prioritise Exposed models. If they do, then for the duration of the attack, any models in the target Unit that are not Exposed are entirely ignored. This means that the Concealed Combat Rating Penalty will not apply, but it also means that any models that are not Exposed cannot be Destroyed. If the nearest Exposed model is outside of the attack's Long Range, the attack cannot prioritise Exposed Models. If all of the Exposed models in the target Unit are Destroyed, any remaining Damage is discarded with no effect.
Ranged Attacks. To make a Ranged Attack with a Unit, follow the steps below:
- Choose a Target. Choose an enemy Unit for which the active Unit can confirm Target Acquisition. This is the attack's target. In the case of Opportunity Fire, the chosen target must be the active enemy Unit.
- Determine Combat Rating. Consult the table below to see if any Combat Rating Bonuses or Penalties apply to the attack. If there are more Bonuses than Penalties, the attack is Improved. If there are more Penalties than Bonuses, the attack is Weakened. Otherwise, the attack is Neutral. This will affect the outcome of the Attack Roll.
| Combat Rating | Bonus / Penalty | Condition |
|---|---|---|
| Aiming | Bonus | The attacking Unit made an Aim manoeuvre this turn. |
| Short Range | Bonus | The target Unit is within the attack's Short Range. |
| Concealed | Penalty | The attacking Unit's Officer cannot draw Clear Line of Sight to at least half of the models in the target Unit. |
| Suppressed | Penalty | The attacking Unit is Suppressed. |
| Opportunity Fire | Penalty | The attacking Unit is using Opportunity Fire. |
| Reforming | Penalty | The attacking Unit makes a Disembark or Exit manoeuvre this turn. |
- Roll Attack Pool. Consult the Attack Dice column of the attacking Unit's Armaments Grid, and gather a number of Attack Dice shown for the current number of models in the Unit. This is the Attack Pool. Roll the dice, and resolve them as described in Attack Rolls.
- Check for Suppression. If at least one model in the target Unit was Destroyed, it takes a Suppression Test.
Close Quarters Attacks. To make a Close Quarters Attack with a Unit, follow the steps below. The term "Close Quarters Combat" is used to refer to the active Unit's attack and the target's retaliation.
- Determine Combat Rating. Consult the table below to see if any Combat Rating Bonuses or Penalties apply to the attack. These will affect the Attack Roll. If there are more Bonuses than Penalties, the attack is Improved. If there are more Penalties than Bonuses, the attack is Weakened. Otherwise, the attack is Neutral.
| Combat Rating | Bonus / Penalty | Condition |
|---|---|---|
| Outflanking | Bonus | The target Unit is Outflanked. |
| Overwhelming | Bonus | The attacker is Infantry, and the target is Armour or a Fortification. |
| Supported | Bonus | There is at least one friendly Unit other than the attacking Unit within 2" of the target Unit. |
| Suppressed | Penalty | The attacking Unit is Suppressed. |
| Threatened | Penalty | There is at least one enemy Unit other than the target Unit within 2" of the attacking Unit. |
Defensive Advantage. If the attacker made an Impeded Charge, the target has the Defensive Advantage. When this is the case, the target Unit makes its Close Quarters Attack (if it has one) first, then the active Unit Retaliates.
- Roll Attack Pool. Consult the Melee or Impact column on the attacking Unit's Armaments Grid, and gather the number of Attack Dice shown for the current number of models in the Unit. This is the Attack Pool. Roll the dice, and resolve them as described in Attack Rolls. Then, if the target Unit is Annihilated, the action ends immediately.
- Target Retaliates. If the target Unit has a Melee score, it now makes a retaliatory attack against the active Unit. Repeat Steps 1 and 2 above with the target Unit, treating the active Unit as the target. Then continue to Step 4.
Designer's Note: Close Quarters Combat. When a Unit makes a Close Quarters Attack against an enemy that has a Melee attack, that enemy gets to retaliate - they aren't just going to stand back and do nothing!
- Resolve the Close Quarters Combat. The Unit that destroys the most enemy models wins the Close Quarters Combat, and the other Unit loses. The losing Unit Withdraws by making a 3" move. When making this move, models in the Unit can move within 1" of an enemy Unit. At the end of this move, no model in this Unit can be in contact with a Strategic Objective Marker. Any model that cannot make this move, or that ends this move within 1" of one or more enemy models, is immediately Destroyed. Then, the losing Unit takes a Suppression Test.
Stalemate. If neither side loses any models, or if both sides lose the same number of models, the combat ends in a Stalemate. The attacking Unit Withdraws, and neither side needs to take a Suppression Test.
Secondary Combatants. If the active Unit's Charge brought it into contact with more than one Unit, it can only make attacks against the Unit that was chosen as the target of its Charge. The other Units are referred to as Secondary Combatants. Secondary Combatants with Melee attacks can Retaliate at the same time that the target of the charge does. If the target Unit loses the melee, each Secondary Combatant Unit also Withdraws, but they do not need to take Suppression Tests.
Unit Statuses in Action
The following Statuses are gained through Special Actions and are referred to above.
- On Lookout. A Unit that is On Lookout can be used to declare Opportunity Fire during either of an enemy Unit's Reaction Steps. A Unit loses this Status at the start of its next Activation, or when it moves, enters contact with an enemy Unit, or uses Opportunity Fire.
- Taking Cover. While a Unit is Taking Cover, its Defence is increased by 1 against Ranged Attacks where the Concealed Combat Rating penalty is in effect. Taking Cover has no effect against Close Quarters Attacks. The Unit loses this Status if it moves, if it enters contact with an enemy Unit, or when it starts its next Activation.
- Reloading. A Reloading Unit cannot make any Ranged Attacks with weapons that have the Reload Quality. A Unit loses this Status when it makes a Re-Arm action.
Special Actions
Instead of making an attack, a Unit can make one of the following actions.
- Go On Lookout. The Unit gains the On Lookout status.
- Take Cover. The Unit gains the Taking Cover status.
- Re-Arm. This action can only be made by a Unit with the Reloading status. The Unit loses the Reloading status.
- Embark. This action can only be made by Infantry Units that have not made a Disembark manoeuvre in the same turn. The Unit embarks on an unoccupied Transport Unit within 3".
- Garrison. This action can only be made by Infantry Units. The Unit Garrisons an unoccupied Defensible Building within 3".
Attack Rolls
Whenever a Unit makes an attack against another Unit, it is resolved with an Attack Roll. The Unit's General gathers and rolls a number of Attack Dice, then resolves the outcome by following the steps listed below.
Understanding Attack Dice
An Attack Die has six faces, each marked with a special icon that has a particular effect. Some of these icons can be re-rolled, depending on the attack's Combat Rating.
- Heroic Strike. Each Attack Die has one Heroic Strike face. Each Heroic Strike adds another Attack Die to the roll, and scores two Hits on the target Unit.
- Strike. Each Attack Die has two Strike faces. Each Strike scores one Hit on the target Unit.
- Glancing Strike. Each Attack Die has one Glancing Strike face. Glancing Strikes are re-rolled, unless the Combat Rating is Weakened, in which case they are discarded.
- Miss. Each Attack Die has one Miss face. Misses are discarded, unless the Combat Rating is Improved, in which case they are re-rolled.
- Blank. Each Attack Die has one Blank face. Blanks are discarded.
Resolving an Attack Roll
After rolling an Attack Pool, follow these steps in order:
-
Heroic Strikes Explode. For each die that scored a Heroic Strike, roll another die and add it to the Attack Pool. Heroic Strikes that result from these additional dice do not cause further dice to be rolled into the pool.
-
Resolve Re-Rolls. Depending on the attack's Combat Rating, you may be able to re-roll some or all of the dice in the Attack Pool.
- If the attack has a Weakened Combat Rating, you cannot re-roll any dice.
- If the attack has a Neutral Combat Rating, you can re-roll any dice that scored Glancing Strikes.
- If the attack has an Improved Combat Rating, you can re-roll any dice that scored Misses and Glancing Strikes.
To re-roll a die, pick it up and roll it again. The original result is disregarded, and only the re-rolled result applies. Note that any re-rolls that score Heroic Strikes do not cause additional dice to be rolled into the pool.
-
Apply Damage. Each Strike in the pool scores a Hit on the target, and each Heroic Strike scores two Hits. Blank, Miss and Glancing Strike results do not inflict any Hits.
The target Unit's Defence shows how many Hits must be scored for it to suffer a point of Damage. So, if the target has Defence 1, every Hit inflicts one Damage. If it has Defence 3, every three Hits inflict one Damage, and so on. Any excess Hits are disregarded with no effect.
For example, seven Hits are scored on a Unit with a Defence of 2. The Unit suffers 3 Damage, and the lone remaining Hit has no effect.
Bonus Re-Rolls. Before re-rolling any dice, a General may declare that they are using a Special Rule or issuing a Command that allows them to re-roll dice that they would otherwise be unable to. They cannot do this if they have already re-rolled any dice; remember that a die can never be re-rolled more than once.
Damaging Units
Units can accumulate Damage as the result of attacks. Once a Unit's accumulated Damage equals its Damage Limit, one model in the Unit is Destroyed (see below) and the Unit's accumulated Damage is reset to zero. Then, any remaining Damage is applied.
If a Unit has a Damage Limit of 1, one of its models is Destroyed for each point of Damage that it suffers. If a Unit has a Damage Limit of 2 or higher, place Damage Tokens next to the Unit to track how much Damage it has accumulated.
For example, a Unit has a Damage Limit of 3, and suffers two Damage from an attack. A "2 Damage" token is placed next to the Unit to show this. A subsequent attack also deals two Damage. The first point of Damage brings the Unit's total Damage to 3, and one of its models is Destroyed. Its Damage total resets to 0, then the remaining point of Damage is applied, leaving the Unit with a "1 Damage" token.
Destroying Models. When a Unit's Damage reaches its Damage Limit, one of its models is Destroyed. The Unit's General removes one model in the Unit from play, following the guidelines below.
- If the Unit uses Open Formation, the model closest to the attacking Unit is Destroyed. If multiple models are equally close, the Unit's General can choose which of them is Destroyed.
- If the Unit uses Close Formation, one model in the back rank, chosen by the Unit's General, is Destroyed. If the Unit only has a single rank, a model at one end of the rank, chosen by the Unit's General, is Destroyed.
Disordered. A Disordered Unit suffers a -1 penalty to its Discipline rating, and Commands cannot be issued to it. A Disordered Unit loses this Status at the end of its next Activation, or as soon as it is within 6" of a friendly Commander Unit.
Wrecks. Some large models have a special rule which states they are not removed from play when they are Destroyed. Instead, they remain in play as an immobile piece of terrain. To show this, they are marked with a Wrecked status token. A Wrecked model counts as having been destroyed for all purposes, even though it has not been removed from play. It remains on the Battlefield, and is treated as Blocking Terrain for the rest of the game.
Loss of an Officer. If a Unit's Officer model is Destroyed, the Unit immediately gains the Disordered status. Then, the Unit's General must perform a Field Promotion by choosing a surviving model in the Unit to become its new Officer. In Close Formation Units, the Officer always occupies the centre of the front rank, so a different model can simply be removed from the back rank in its stead.
Designer's Note: Maintaining Order. An easy way to mark that a model has been promoted to an Officer is to replace it with the original Officer model. When doing this, ensure that the model's position and alignment are not inadvertently changed.
Annihilating Units. If the last model in a Unit is Destroyed, the Unit has been Annihilated. The Unit plays no further part in the battle. When a Unit is Annihilated, the opposing General immediately scores a number of Victory Points equal to the target Unit's Victory Points Rating.
Recovering Damage. A Unit's accumulated Damage is only removed when a model is Destroyed, or when a rule specifically allows Damage to be Recovered. For each point of Damage that is recovered, immediately reduce the amount of Damage that the Unit has accumulated by one. Recovering Damage cannot cause a previously Destroyed model to be returned to play.
Additional Rules
This section contains any remaining rules which are required to play Armoured Clash.
Suppression
When a Unit loses models to a Ranged Attack, or loses a Close Quarters Combat, it must usually take a Suppression Test. Other effects may also cause a Unit to take a Suppression Test.
Suppression Tests. A Suppressed Unit suffers a Combat Rating Penalty whenever it makes a Ranged Attack or Close Quarters Attack. In addition, it must take a Rally Test the next time it is Activated to see whether it can use both its Movement Step and Attack Step. A Unit loses this Status at the end of its next Activation.
A Suppression Test is a type of Discipline Test. If at least half of the models that were in the Unit at the start of the attack have been Destroyed, the Unit's Discipline has a -1 Modifier.
If the test is passed, there is no effect. If the test is failed, the Unit gains the Suppressed status.
Falling Back. If a Unit that is already Suppressed fails another Suppression test, it Falls Back. Move each model in the Unit a full 3", so that the Unit ends the move as close as possible to its General's Rear Edge, and not within 1" of any enemy Units. This move is unaffected by any Terrain that is not Impassable.
If it is not possible for a Unit to Fall Back a full 3" without being within 1" of an enemy Unit, its General must remove models from the Unit until this is possible, or until all models have been removed. Any models that are removed count as having been Destroyed.
Fleeing the Field. If a Unit that is Falling Back reaches its own edge of the Battlefield, it is removed from play, and counts as having been Annihilated.
Breaking. If a Unit fails a Suppression Test, and its model count is equal to or lower than its Break Limit, it Breaks. A Unit that Breaks is removed from play, and counts as having been Annihilated. If a Unit does not have a Break Limit, it cannot Break.
Issuing Commands
A General can play Command & Conquest Cards from their hand to issue Commands to their Units. Units that are Disordered cannot have Commands issued to them.
The Command section of each card shows the Name of a Command that can be issued, a Condition for issuing it, and an Effect that is resolved when it is successfully received.
A General can issue a Command as long as the Condition for issuing the order is met. To do so, they play the card face-down in front of them, and declare which Unit the Command is being issued to. Their opponent then has the opportunity to Interfere.
If the opposing General foregoes this opportunity, or if Interference is unsuccessful, the Command is successfully received. It takes effect immediately, and is then discarded.
Interference. To Interfere, the opposing General chooses a card from their hand and plays it in front of them. Then, the issued Command card is revealed.
Interference represents the opposing force's attempts to scramble transmissions, intercept messengers, or otherwise prevent orders reaching their destination.
If the Interfering General's card has a higher Value than the Command, the Command fails and both cards are discarded without the Effect being resolved. Otherwise, the Command is successfully issued and the Interfering card is discarded.
Command Limits. Each General can only issue one Command per Activation, even if a Command fails due to Interference. Some Commands can be issued outside of a Unit's Activation but are still limited. A General cannot issue more than one Command at the same time.
Special Commands. Some rules allow a General to issue Special Commands to their Units. Flank Attack is one example, and others can be found in some ORBATs and Clashes.
A Special Command has a Condition and an Effect. A General can issue a Special Command as long as its Condition is met, by naming the Special Command and playing any card from their hand. This follows all of the rules for issuing a Command, but the Effect listed on the card is replaced with the Special Command's Effect.
A Special Command is treated as a Command in all respects - any rules that affect a Command will also affect a Special Command.
Scoring Victory Points
Each General keeps a running tally of the Victory Points (VPs) they have scored since the start of the game. There are three types of Objective which a General can claim in order to score Victory Points: Annihilation Objectives, Clash Objectives and Conquest Objectives.
Annihilation Objectives. Whenever a Unit is Annihilated, the opposing General immediately scores a number of Victory Points equal to the Unit's Victory Points Rating, as shown on its Profile.
Most Units have a Victory Points Rating that is made of three numbers, separated by slashes. The one that is used depends on the Reinforcement Level that was selected for the Unit, as shown on its Force List:
- The first number is used for Basic Units.
- The second number is used for Reinforced Units.
- The third number is used for Full Strength Units.
Units that cannot be selected at different Reinforcement Levels have only a single Victory Points Rating.
Clash Objectives. Each Clash lists a set of Objectives. The rules for claiming the Objectives, and scoring the available Victory Points, varies from one Clash to the next.
Strategic Objective Markers. Some Clash Objectives require Generals to control Strategic Objectives on the Battlefield, which are represented by round plastic Markers, 50mm in diameter. Strategic Objectives always count as Open Terrain, and never affect Line of Sight.
Strategic Objectives can be controlled by Infantry and Cavalry Units.
A General is controlling a Strategic Objective if:
- One of their Infantry or Cavalry Units is in contact with the Marker, and
- There are no enemy Units in contact with the Marker, not counting Aircraft, Rotorcraft and Fortifications.
Conquest Objectives. A Conquest Objective must be claimed when its Trigger is met. For example, the Annihilate (Heavy) objective shown on the card must be claimed as soon as the last model in the Unit has been Destroyed; the General cannot move onto another attack, then retroactively decide to claim the Objective. Of course, common sense and sportsmanship must apply. Hurrying an opponent along so that they forget to claim an objective is entirely against the spirit of the hobby.
A General can play Command & Conquest Cards from their hand to claim Conquest Objectives. The Conquest section of each card shows the Name of a Conquest Objective that can be claimed, a Trigger for claiming it, and Victory Point Reward.
A General can claim a Conquest Objective as long as the Trigger for claiming the Objective is met. To do so, they reveal the card to their opponent, claim the Victory Point reward, then discard the card.
A General can claim more than one Conquest Objective at the same time - even multiple copies of the same Conquest Objective - as long as their Triggers are all met.
Battlefield Terrain
No battle takes place across a featureless expanse. Terrain gives Generals the opportunity to formulate strategies, and forces them to carefully consider the movement and positioning of their Units.
All terrain has a Size, in the same way as a Unit. In addition, a piece of terrain can have one or more Features, as detailed below. These Features may impose specific rules, or may interact with other parts of the rules in a specific way. Any areas of the Battlefield that do not have any Features are referred to as Open Terrain, and do not have any special rules.
The following table should be used as a guide to terrain sizes.
| Size | Example |
|---|---|
| 0 | Open ground, swamps, rivers. |
| 1 | Defence lines, tank traps, barricades, low walls. (Under 1" tall) |
| 2-3 | Forests, buildings, bridges. (1"-3" tall) |
| 4-5 | Huge buildings, monuments, cliffs. (3"-5" tall) |
Designer's Note: Mixed Sizes. If models in a Unit have different Sizes due to Terrain, and it is necessary to know the Size of the Unit itself, use the Size of the majority of models in the Unit. In the case of a tie, use the lower Size.
Terrain Features
Each piece of terrain can have one of the following Features, which will affect how Units interact with it.
Difficult Terrain. Difficult Terrain is an area of uneven or hazardous ground that cannot be traversed at speed. Any distance that a Unit travels into, out of or through Difficult Terrain is counted as double. For example, if a Unit moves through 3" of Difficult Terrain, it counts as having moved 6".
Line of Sight is unaffected by Difficult Terrain. However, if a Charging Unit moves through Difficult Terrain, the target will have the Defensive Advantage in the ensuing Close Quarters Combat.
Examples: steep inclines; swamps; deep snow.
Dense Terrain. Dense Terrain is an area that is hard to traverse at speed, and which obstructs a Unit's view.
Designer's Note. Dense Terrain affects movement and Charging in the same way as Difficult Terrain.
In addition, if a model's Line of Sight crosses up to 3" of Dense Terrain, it is Obscured. If a model's Line of Sight crosses more than 3" of Dense Terrain, it is Blocked.
Designer's Note: Rolling Hills. Hills can be represented on the tabletop in a number of different ways. Where appropriate, it can be helpful to divide them into "levels", and use a different Size for each level. For example, the crest of a Hill might be Size 2, while its lower slopes are Size 1. As long as both Generals have the same information at the start of the game, all is well.
Examples: forests; crop fields; bombed-out farmsteads.
Impassable Terrain. Impassable Terrain is a part of the Battlefield which cannot be crossed. A Unit cannot move into or across Impassable Terrain. Line of Sight is unaffected by Impassable Terrain.
Examples: sheer cliffs; deep chasms.
Designer's Note: Best Judgement. Owing to the enormous variety of Battlefield terrain available, it is impossible to create a set of terrain rules which covers every single situation. When setting up the Battlefield before a game, both Generals should take a moment to agree how each piece of terrain is defined, where its edges or boundaries lie, and any Features that it has. This is infinitely preferable to pausing play at a crucial moment because a consensus can't be reached on whether a Unit should be able to garrison that half-ruined farmhouse.
Blocking Terrain. Blocking Terrain is part of the Battlefield which cannot be traversed, and which entirely blocks visibility. Blocking Terrain counts as Impassable Terrain, with the addition that it blocks Line of Sight.
Examples: intact buildings; wrecked land ships.
Obstacles. Obstacles are linear terrain features, no more than ½" wide or high, but of any length.
When an Infantry or Cavalry Unit moves across an Obstacle, it sacrifices 1" of its movement. Field Gun Units cannot move across Obstacles. Other Unit types are unaffected.
For example, an Infantry Unit with a Speed of 4" is making a Double Time manoeuvre, which would normally allow it to move up to 8". It crosses two Obstacles during this move, so it can only move up to 6".
If an Infantry, Cavalry or Field Gun Unit is the target of a Ranged Attack, and the attacker's Line of Sight crosses an Obstacle that is In Contact with the target Unit, it is Concealed.
Examples: walls; fences; defensive barricades.
Special Terrain Features. Some types of terrain have additional rules.
Hills. Hills block Line of Sight in the same way as Blocking Terrain, but do not impede movement. If a model (or another Terrain Feature) is on a Hill, its Size is increased by the Hill's Size. These rules can also be applied to other forms of elevated terrain.
Roads. When moving a Unit, each of its models that spends the entire move on a road increases its Speed by 2". Roads have no effect when a Unit is Withdrawing or Falling Back.
Water. Water terrain, such as rivers and lakes, is incredibly difficult to traverse unless a Unit is specially equipped to do so. Infantry and Cavalry Units treat Water as Difficult Terrain. Field Gun, Armour and Artillery Units treat Water as Impassable Terrain.
Garrisoning Defensible Buildings
Intact buildings are usually treated as Blocking Terrain. However, if a building is sufficiently large and well-constructed, it can be defined as a Defensible Building. Defensible Buildings can be Garrisoned by Infantry Units, creating a well-defended firebase.
Each Defensible Building must have a clearly defined Footprint, usually its outer walls. Generals may agree that some superficial features - buttresses, balconies, gatehouses, and so on - do not count towards a building's Footprint.
Building Capacity. Each Defensible Building can hold a single Infantry Unit. When it is doing so, it is Occupied; otherwise, it is Unoccupied.
Garrisoning and Exiting a Building. An Infantry Unit must make a Garrison Action if it wishes to enter a Defensible Building, and must make an Exit manoeuvre if it wishes to leave.
Making a Garrison Action. An Infantry Unit can make a Garrison Action in its Attack Step. Choose an unoccupied Defensible Building within 3" of the active Unit. Remove the Infantry Unit from the Battlefield, and set it aside. It is now Garrisoning the building.
Designer's Note: Imposing Edifices. The rules assume that a Defensible Building has a Footprint between 2"x2" and 4"x4". If a building is larger than this, the Generals can agree to split it into sections and treat each one as a separate Defensible Building, each of which can hold a single Unit. For smaller buildings, the Generals can agree to limit its capacity to a number of models. We suggest 12 models for a small building, or 8 for a very small building. Ensure that this discussion takes place during setup, when clarifying any other terrain features on the Battlefield. In addition, the centre point of each Defensible Building should be defined, as this will be required when they are making (or being targeted by) Ranged Attacks.
Making an Exit Manoeuvre. An Infantry Unit that is Garrisoning a Defensible Building can make an Exit Manoeuvre in its Movement Step. Set up the Unit on the Battlefield so that each of its models is within 3" of the building, and it is not within 1" of any enemy Units.
Designer's Note: Interior Detail. If your terrain collection features buildings with removable roofs, you can of course place models inside the building instead of setting them aside! Alternatively, many Generals will place models on the roof to show that the Unit is occupying the building.
Garrisoned Units. While a Unit is Garrisoning a building, it cannot make any Manoeuvres other than Exit. The Unit is considered to occupy the building's entire Footprint, and has the same Size as the building.
If a Garrisoned Unit would Fall Back, it immediately makes an Exit manoeuvre instead of a 3" move. It must be placed as close as possible to its own General's Rear Edge, and all other rules for Falling Back still apply.
Dug In. Unlike Units Embarked on a Transport, Garrisoned Units can still make, and be targeted by, Ranged Attacks.
A Garrisoned Unit is treated as having a 360° Front Arc. When confirming Target Acquisition, measure any ranges to or from the centre point of the building, and draw line of sight to or from any part of the building's Footprint.
When determining the number of Attack Dice for an Attack made by a Garrisoned Unit, only count half the Unit's models, rounding up.
When a Garrisoned Unit is the target of a Ranged Attack, it always counts as Concealed, and increases its Defence by 1.
Storming a Building. A Garrisoned building can be targeted by an enemy Charge manoeuvre, as though it were a Unit. The attacking Unit must end its move so that at least one of its models is in contact with the building's Footprint.
When determining the number of Attack Dice for the attacking Unit in the ensuing Close Quarters Attack, only count half the Unit's models, rounding up. The Garrisoned Unit also has the Defensive Advantage as though the attacker Charged through Difficult Terrain.
If a Garrisoned Unit loses a Close Quarters Combat, it immediately makes an Exit manoeuvre instead of Withdrawing. It must be placed as far as possible from the attacking Unit. Then, if the attacker was an Infantry Unit, it can immediately Garrison the building if its General wishes.
Objectives in Buildings. Strategic Objective Markers can be placed on top of Defensible Buildings, representing an objective within the building itself. Any Unit that is in contact with the building counts as being in contact with the Strategic Objective Marker.
If a Unit is Garrisoning the building, it always counts as controlling that Strategic Objective Marker, regardless of the presence of enemy Units.
Transporting Units
Some Units are capable of transporting friendly Units, protecting them from incoming fire and making them more manoeuvrable.
Designer's Note: For Clarity! As a reminder, you can place the Infantry Unit's Officer model next to the Transport Unit, so that both Generals can see that the Unit is Embarked. The Officer model doesn't count as being on the board, and is just treated like a marker.
Transport Capacity. A Transport Unit can carry a single Infantry Unit. When it is doing so, it is Occupied; otherwise, it is Unoccupied.
A Transport Unit always has the Capacity (X) special rule, which states that for each model in the Transport Unit, it can carry X Infantry models. This total is referred to as the Unit's Transport Capacity.
For example, a Unit of Stirling Armoured Transports has the Capacity (3) special rule, meaning that it can carry 3 Infantry models for each Stirling in the Unit. A Unit of four Stirlings has a Transport Capacity of 12.
Embarking During Deployment. When Deploying a Transport Unit, a General can declare that one of their available Units is Embarked upon it, as long as it is possible for that Unit to be Embarked.
Embarking and Disembarking. An Infantry Unit must make an Embark Action if it wishes to enter a Transport Unit, and must make a Disembark Manoeuvre if it wishes to leave.
Making an Embark Action. An Infantry Unit can make an Embark Action in its Attack Step. Choose an Unoccupied Transport Unit within 3" of the active Unit. Remove the Infantry Unit from the Battlefield, and set it aside. It is now Embarked on the chosen Transport Unit.
Making a Disembark Manoeuvre. An Infantry Unit that is Embarked in a Transport Unit can make a Disembark Manoeuvre in its Movement Step. Set up the Unit on the Battlefield so that each of its models is in Unit Coherency, is within 3" of a model in the Transport Unit, and is not within 1" of any enemy Units.
Embarked Units. An Embarked Unit and the Transport Unit on which it is Embarked are Coordinated.
While a Unit is Embarked, it cannot make any Attacks, or any other Actions in its Attack Step. In addition, it cannot make any Manoeuvres in its Movement Step other than Disembark.
An Embarked Unit cannot be targeted by enemy Attacks - these must target the Transport Unit instead. If an Occupied Transport Unit is engaged in a Close Quarters Assault, the Embarked Unit cannot Retaliate.
An Embarked Unit can still be subject to Statuses; tokens should be placed with the Unit, even though it is not in play.
If an Occupied Transport Unit has to take a Suppression Test, a separate Suppression Test is also made for its Embarked Unit.
Attacking Transport Units. When a model in a Transport Unit is Destroyed, the Unit's Transport Capacity is immediately reduced.
If the Unit is Occupied when this happens, and its new Transport Capacity is lower than the number of models in the Embarked Unit, the Unit's General must remove models from the Embarked Unit until this is no longer the case. Those models are treated as having been Destroyed, and are counted when determining which side won a Close Quarters Combat.
Unit Traits
Designer's Note: At a Glance. Target Categories can broadly be defined as follows: models on square bases are Light. Models on flight stands are Aerial. Models without bases are Heavy. This is not infallible, as there will almost certainly be exceptions, but it is a good rule of thumb.
Each Unit has a number of Traits - special keywords which give a selection of special rules, and to which other rules might refer. Traits can be used to describe a Unit; for example, a Commander Unit is any Unit that has the Commander Trait. A Unit's Traits are shown at the bottom of its Profile.
Common Traits. The first three Traits listed for a Unit are its Faction, Unit Type and Target Category:
- A Unit's Faction shows which ORBAT it is drawn from.
- A Unit's Type determines how it acts on the Battlefield.
- A Unit's Target Category determines which row of Armaments Grid is used when a Ranged Attack is made against it. There are three categories: Light, Heavy and Aerial.
Special Traits. Units with the following Traits have some additional special rules.
- Commander. Each Battlegroup in a Force is led by a Commander Unit. A Unit within 6" of a friendly Commander cannot become Disordered. If a Disordered Unit moves to within 6" of a friendly Commander, or vice versa, it immediately loses its Disordered status.
- Transport. Transport Units are used by many factions to ferry slow-moving Infantry around the Battlefield. Friendly Units can Embark upon a Transport Unit, as described in the rules for Transporting Units.
- Behemoth. Behemoth Units are large war machines which represent the pinnacle of their faction's land war capabilities. A Behemoth Unit always consists of a single model. As such, the Armaments Grid on its Profile lists Damage instead of Models. When gathering Attack Dice for a Behemoth Unit's attack, use the column that corresponds to how much Damage it has suffered.
Aircraft
Designer's Note: Screaming Skies. Aircraft are justifiably terrifying in Armoured Clash, swooping onto the Battlefield and delivering deadly payloads, then disappearing before the enemy can retaliate. To represent this, they operate rather differently to most units.
In Armoured Clash, Aircraft play a unique role. They are only present above the Battlefield for brief periods, swooping in to make attack runs before disappearing towards the horizon.
When an Aircraft Unit is deployed, its General is effectively setting up its attack run for the Round. This gives their opponent a chance to position their Units and put them On Lookout.
Aircraft Units must always be deployed in Reserve at the start of a game.
Designer's Note. Most aircraft rely on their speed, rather than a high Defence or Damage Limit, and most factions have one or two dedicated anti-air Units... but their General will have to keep them out of harm's way until the time comes to put them to use!
All models in the Unit must be placed so that they are facing the same direction.
Deploying Aircraft
When an Aircraft Unit is Deployed from Reserve, it must be placed in its Deployment Zone, in contact with a Battlefield edge, as normal. It can be given a Special Command to make a Flank Attack if the General wishes.
Activating Aircraft
Incoming Aircraft. Aircraft Units that have been deployed from Reserve are Incoming until they are activated. This represents the aircraft appearing on the horizon, hurtling towards the Battlefield.
Units can never confirm Target Acquisition on an Incoming Aircraft Unit. As such, Aircraft Units can only be targeted by Opportunity Fire, unless a rule specifically states otherwise.
An Aircraft Unit's Activation does not follow the standard steps. Instead, it makes an Air Support Sortie. An Air Support Sortie has five steps, which are resolved in order:
- A. Approach Step - The Unit speeds towards its target.
- B. Reaction Step - The opposing General has a chance to declare Opportunity Fire.
- C. Engage Step - The Unit makes its attack.
- D. Escape Step - The Unit moves off the Battlefield.
- E. Reaction Step - The opposing General has a chance to declare Opportunity Fire a second time.
The Approach Step. Each model in the active Unit moves forwards in a straight line, any number of inches. At the end of the move, each model must be in Unit Coherency, and must be placed so that it faces the direction in which it moved.
Reaction Steps. In a Reaction Step, the opposing General can declare Opportunity Fire with Units that are On Lookout. Opportunity Fire can be declared with any Unit that could have confirmed Target Acquisition on the Air Support Unit at any point during the previous step's move. In addition, the opposing General can declare Opportunity Fire with one Unit in each Reaction Step, not just one Unit in the whole Activation. Other than this, all of the standard rules for Opportunity Fire are followed. Aircraft Units cannot be Suppressed.
The Engage Step. The active Unit makes a Ranged Attack. Some Aircraft Units may have Special Rules which allow them to perform different Actions in their Engage step, instead of making a Ranged Attack.
The Escape Step. Each model in the active Unit moves forwards in a straight line, any number of inches, until it leaves the Battlefield. Once any Opportunity Fire has been resolved, the Unit returns to its General's Reserve. This means that it can be deployed again in the next Round.
Because Aircraft are not in play during the End Phase, a Force that only has Aircraft remaining will be subject to the Zero Ground Presence rule.
Preparing to Play
Before playing a game of Armoured Clash, the Generals must prepare their Forces, choose a Clash and prepare the Battlefield, by following the steps below.
Designer's Note: It's Your Game. If you'd like to play larger or smaller battles, use different Battlefield dimensions, modify hand sizes or anything else... you are entirely free to do so! The rules here are designed to offer a fun, balanced experience, but you and your opponent are the masters of your own gaming table.
1. Establish Parameters
Both Generals agree to one of the following Force Scales: Skirmish, Battle or Cataclysm.
- A SKIRMISH uses small Forces, and is ideal for people who are new to Armoured Clash, or who want to play a game in a short space of time.
- A BATTLE is the standard game size.
- A CATACLYSM is a larger game with very few limits, ideal for set piece games and epic confrontations.
The chosen Force Scale will determine a number of elements during the game, summarised in the table below:
| Force Scale | Points Limit | Hand Limit | Battlefield |
|---|---|---|---|
| Skirmish | 1000 (500 to 1500) | 4 | 36" x 48" |
| Battle | 2000 (1500 to 2500) | 5 | 48" x 48" |
| Cataclysm | 3000 (2500 to 4000) | 6 | 48" x 72" |
Points Limit. This is the default Points Limit for the chosen Force Scale. This determines how many Points each General has to spend when assembling their Force. The Generals can agree to a different Points Limit if they prefer. The table shows a suggested range for each Force Scale. Whatever the case, both Generals always use the same Points Limit unless the chosen Clash specifies otherwise.
Hand Limit. This determines how many Command & Conquest cards a General will have in their hand at the start of each Round.
Battlefield. This shows the recommended Battlefield dimensions for this Force Scale. Generals can use a larger or smaller Battlefield if they wish, but a Battlefield can never be smaller than 36" x 36".
2. Assemble Forces
Each General assembles a Force from the Units in their collection, ready to take to the field in glorious battle. In order to do so, they must first obtain a copy of their chosen Faction's Order of Battle (ORBAT).
An ORBAT has everything a General needs to use their Faction's Units in a game of Armoured Clash. This includes Unit Profiles, Points Values and Battlegroup information, as well as links to the Glossary of Rules & Qualities: a comprehensive listing of all the Special Rules and Weapon Qualities in the game. All ORBATs that are currently available can be downloaded from www.armouredclash.com.
Battlegroups. Battlegroups are the building blocks of a General's Force. They organise Units into fighting divisions, each led by a Commander Unit, ensuring that each Force has a reasonable balance of different Unit types. Battlegroups usually have minimum and maximum numbers for each Unit type, meaning they can vary in size and composition while maintaining a sense of structure. A Unit can only ever belong to a single Battlegroup.
Each ORBAT contains a listing for a Faction Battlegroup, which offers flexibility and plenty of options to build a standard Force.
They may also contain Auxiliary Battlegroups, which give Generals the opportunity to field thematic collections of Units that are unique to their chosen Faction, or Heroic Battlegroups, representing iconic vehicles, legendary companies and dramatis personae.
There is no limit to how many Battlegroups a Force can comprise, however, an ORBAT may list restrictions on how many of a specific Battlegroup may be taken.
Reinforcement and Points Values. Most Units in Armoured Clash have three Reinforcement Levels: Basic, Reinforced and Full-Strength. This determines how many models are in the Unit at the start of the game, and how many Victory Points the opposing General will score for Annihilating the Unit.
Each of a Unit's Reinforcement Levels has its own Points Value. This is how many points it costs to include the Unit at that Reinforcement Level in a Force. The total Points Values of all the Units in a Force cannot exceed the Points Limit that was decided for the game.
Reinforcement Level Limits. The Reinforcement Level at which Units can be chosen is limited by the chosen Force Scale. In a Skirmish, all Units must be chosen at the Basic level. In a Battle, Units can be chosen at the Basic or Reinforced levels. In a Cataclysm, all three Reinforcement Levels are available. Note that specific ORBAT, Battlegroup or Unit rules may alter this, and allow Units to be Reinforced beyond the standard levels.
Writing a Force List. Using their ORBAT, each General creates a Force by choosing Units and adding them to a written Force List. The Force List should clearly show each Unit, its Reinforcement Level and Points Value, and which Battlegroup it belongs to.
When assembling their Force, a General must follow these rules:
- Each Unit in the Force MUST belong to exactly one Battlegroup.
- Any Minimum and Maximum requirements of each Battlegroup must be met. (For example, a Battlegroup that lists "2+ Infantry units" and "0-3 Armour units", must have two or more Infantry Units, and cannot contain more than three Armour Units.)
- Reinforcement Limits for the chosen Force Scale must be obeyed.
Designer's Note: Making a List. Generals should feel free to jot their Force List down on paper, use a spreadsheet of their preference or a suitable third-party list-building app. If playing at an organised event, there may be suggestions or rules on how to do this. Providing a hard copy of a Force List to your opponent is a courtesy, and some Organised Play rules may require it. Many Generals will even have a Force prepared in advance that they like to field regularly, ready for pickup games at a local club or gaming shop.
Designer's Note: Battlegroups in Action. In most cases, which Battlegroup a Unit is part of ceases to matter once a game begins; they are mostly used when creating a Force. However, some Battlegroups might offer special rules, such as unique Special Commands, which apply only to Units from that Battlegroup. Where this is the case, it is the General's responsibility to ensure that all Units in the Battlegroup are clearly marked in some way. This is a brilliant opportunity for a modelling project, creating heraldry, banners and markings to differentiate between Battlegroups.
3. Select a Clash
Each game uses a Clash to provide a set of deployment instructions, objectives and special rules. The Clashes section features a list of standard Clashes.
Designer's Note. The Generals can either agree on a Clash to play, or determine one randomly. If they wish, each General can draw a card from their deck, and the General who draws the highest card chooses a Clash. Then, both cards are shuffled back into their decks.
4. Prepare the Battlefield
Designer's Note: The Ideal Battlefield. Terrain comes in all shapes and sizes. When creating your Battlefield, a good rule of thumb is that each piece of terrain should have a footprint of 4" or larger, or should consist of a collection of smaller terrain pieces occupying a similar 4" footprint. Additionally, when placing your terrain, we recommend an even mix of Terrain Features spread across your Battlefield (Difficult, Dense, Impassable, Blocking, etc.), so that each General is offered strategic opportunities and the game is not dominated by long-range artillery strikes.
Consult the Clash to see if there are any special instructions for setting up the Battlefield. Take note of where the Deployment Zones will be located, then place terrain by following the instructions below.
Placing Terrain. The Force Scale you have chosen will determine the minimum and maximum number of Terrain pieces that can be placed:
| Force Scale | Battlefield Dimensions | Number of Terrain Pieces (Min.) | Number of Terrain Pieces (Max.) |
|---|---|---|---|
| Skirmish | 36" x 48" | 5 | 15 |
| Battle | 48" x 48" | 10 | 20 |
| Cataclysm | 48" x 72" | 15 | 30 |
The Generals alternate placing a piece of terrain, using the following guidelines:
- No piece of terrain should be placed within 4" of a Battlefield edge.
- No piece of terrain should be placed within 4" of another piece of terrain.
- Obstacles, Roads and Water are exempt from both of these guidelines.
As each piece of Terrain is placed, the Generals should agree whether it has a Size above 0, and if it has any Features.
Once the maximum number of terrain pieces has been placed, neither General can place any more terrain on the Battlefield. Once the minimum number of terrain pieces have been placed, either General can state at any time that they do not wish to place any more terrain. Their opponent then has the option of placing one more piece (as long as this would not exceed the maximum number).
Designer's Note: Lay of the Land. The rules in this section provide a more-or-less "fair" way of setting up a Battlefield, but they are far from the only way to do so. If both Generals agree, you can disregard these rules and set up terrain however you like, crafting detailed, evocative landscapes that suit the story you'd like to tell on the tabletop.
Once all terrain has been placed upon the Battlefield, the Generals move on to deploying their Forces.
5. Deploy Forces
Designer's Note: Proper Preparation. It is common for Generals to complete steps 1 and 2 - perhaps even step 3 - before meeting to play a game. They will agree on a Force Scale and Points Limit in advance, assemble their own forces, then come together to play. This is a good way to cut down on preparation time, and get straight to the action!
Each General draws a card from their Command & Conquest deck. The General whose card has the highest Value decides whether they will be General A or General B. If the Card Values are the same then draw again until this is not the case. These cards are then shuffled back into their decks.
Then, General A claims one of the Deployment Zones (as detailed in the chosen Clash) and deploys one of their Units so it is in Unit Coherency, and all of its models are fully within their Deployment Zone. General B then claims the other Deployment Zone, and deploys one of their Units, following the same rules. The Generals continue to alternate placing Units in their Deployment Zone until all of their Units have been deployed.
The first General to finish deploying their Units decides whether they will take the Initiative, or give it to their opponent. The General with the Initiative will take the first turn in Round 1.
Reserve Units. Instead of deploying a Unit to the Battlefield, a General can deploy it to their Reserve. Reserve Units are set aside, and can be Deployed from Round 2 onwards.
A General must deploy at least half of their Units, rounding up, at the start of the battle.
6. To Battle!
Setup is complete, and the first Round can begin.
Common Clashes
This section lists five standard Clashes that can be used in games. Additional Clashes may be found in campaign supplements or the Armoured Clash website (www.armouredclash.com).
Designer's Note: Battlefield Dimensions. Each Clash is accompanied by a map, showing deployment zones and other important information. For illustrative purposes, each illustration is scaled to represent a Battlefield that is 48" on each edge. However, the maps will work with any size of Battlefield that is at least 36" on each edge. Many maps show a Midway Line and/or a Centre Line. These lines are traced across the Battlefield, dividing it into two equal parts. Some players might choose to mark these lines (as well as deployment zones, and so on) with dice or tokens during deployment; if so, these should be cleared away before the first Round begins.
Clash 1: Pitched Battle
Land is the most valuable commodity in The Dystopian Age. As two forces prepare to claim what is rightfully theirs, one will emerge victorious. The other will lie dead at their feet...
- Terrain. Set up Terrain following the standard rules. In addition, place three Strategic Objective Markers on the Midway Line, as shown on the map: one in the centre, and one at each halfway point between the centre and a neutral edge.
- Deployment. Each General's Deployment Zone runs from their Rear Edge to 12" away from the Midway Line, as shown on the map. Deploy Forces using standard Deployment rules.
- Game Length. This Clash lasts for five Rounds.
Clash Objective: Secure the Field. During the End Phase of each Round, each General scores Victory Points for each Strategic Objective they are controlling, as shown on the table below. In the End Phase of the fifth (and final) Round, more points are available for holding objectives. The number of Victory Points scored depends on the Force Scale:
| Force Scale | Rounds 1-4 | Round 5 |
|---|---|---|
| Skirmish | 6 | 14 |
| Battle | 9 | 20 |
| Cataclysm | 12 | 26 |
Clash 2: Supply Drop
In the chaos of war, logistical support can become a luxury. When two Generals receive reports of sought-after supplies in contested territory, a desperate race begins.
-
Terrain. Set up Terrain following the standard rules.
-
Deployment. Each General's Deployment Zone runs from their Rear Edge to 12" away from the Midway Line, as shown on the map. Deploy Forces using the standard Deployment rules, with the following exceptions.
After General A and General B have been decided, the Generals take turns placing Strategic Objective Markers anywhere on the Battlefield that is not within 8" of a Deployment Zone or another Strategic Objective Marker. General A places the first marker. Once a total of four Strategic Objective Markers have been placed, General A chooses a Deployment Zone and deployment continues as normal.
-
Game Length. This Clash lasts for five Rounds.
Clash Objective: Recover Supplies. During the End Phase of each Round, each Strategic Objective that is being controlled by a General is Secured by that General. When a Strategic Objective Marker is Secured, it is immediately removed from play. Then, the General who Secured it scores a number of Victory Points based on the Force Scale:
| Force Scale | Points Scored |
|---|---|
| Skirmish | 10 |
| Battle | 15 |
| Cataclysm | 20 |
Clash 3: Lord of the Manor
What the building was in its former glory matters little. Now it is nothing more than a tool of defence; a means of victory. Let yesterday's worries be forgotten. Live to see tomorrow.
- Terrain. Place a Defensible Building in the centre of the Battlefield, with a Strategic Objective Marker on it. This is the Primary Strategic Objective. Then, place two further Strategic Objective Markers as shown on the map. Each of these is a Secondary Objective for the General whose Deployment Zone it is not in contact with. Then, set up terrain following the standard rules.
- Deployment. Each General's Deployment Zone is shown on the map. Deploy Forces using the standard Deployment rules.
- Game Length. This Clash lasts for five Rounds.
Clash Objective: Take and Hold. In the End Phase of each Round, either General can score Victory Points by controlling the central Primary Objective, and/or their Secondary Objective. The number of points scored depends on the Force Scale, and - in the case of the Primary Objective - the current Round.
| Force Scale | Primary Rnd 1 | Primary Rnd 2 | Primary Rnd 3 | Primary Rnd 4 | Primary Rnd 5 | Secondary Objective |
|---|---|---|---|---|---|---|
| Skirmish | 2 | 4 | 6 | 8 | 10 | 3 |
| Battle | 3 | 6 | 9 | 12 | 15 | 4 |
| Cataclysm | 4 | 8 | 12 | 16 | 20 | 5 |
Special Rule: Scouting Parties. If a Unit with the Vanguard special rule is deployed from Reserve, it can make a Flank Attack without being issued a Special Command.
Clash 4: Find the Lady
A pitched battle between two large forces can sometimes be used as a distraction: a smokescreen, allowing the extraction of hidden intelligence or a covert operative.
- Terrain. Set up Terrain following the standard rules. In addition, place three Strategic Objective Markers on the Midway Line, as shown on the map: one in the centre, and one at each halfway point between the centre and a neutral edge.
- Deployment. Each General's Deployment Zone runs from their Rear Edge to 12" away from the Midway Line, as shown on the map. Deploy Forces using the standard Deployment rules.
- Game Length. This Clash lasts for five Rounds.
Escorting the Vital Objective. To mark that a Unit is Escorting the Vital Objective, place the Strategic Objective Marker next to it. This is treated as a status token. If the Unit is Annihilated or Falls Back, the active player moves the Objective Marker so that it is in contact with the Unit's Officer, and in its Front Arc, before any models move or are Destroyed.
Clash Objective: Secure the Field. If a Unit is Escorting the Vital Objective at the end of the Battle, they score Victory Points depending on the Force Scale, and their Disposition. The Escorting Unit's Disposition is based on its position on the Battlefield, and the presence of nearby enemy Units:
- If the Escorting Unit is fully within its own Deployment Zone, and there are no enemy Units within 6", the objective is Secure.
- If the Escorting Unit is fully within its own Deployment Zone, and there is at least one enemy Unit within 6", the objective is Threatened.
- If the Escorting Unit is not within its own Deployment Zone, the objective is Imperilled.
| Force Scale | Disposition: Secure | Disposition: Threatened | Disposition: Imperilled |
|---|---|---|---|
| Skirmish | 30 | 25 | 15 |
| Battle | 50 | 40 | 25 |
| Cataclysm | 70 | 55 | 35 |
Special Rule: Scour the Field. An Infantry or Cavalry Unit can make a special Action in its Attack Step to search for the Vital Objective. To do this, the Unit must be in contact with a Strategic Objective Marker, and there must be no enemy Units in contact with the same marker. When a Unit makes this Action, the active General rolls an Attack Die. If they roll anything other than a Heroic Strike, they find nothing and the Strategic Objective Marker is removed from play. If they roll a Heroic Strike, they have found the Vital Objective. Remove all other Strategic Objective Markers from play. The Unit immediately gains the Escorting the Vital Objective status. If there is only one Strategic Objective Marker on the Battlefield when a Unit makes this special Action, they automatically find the Vital Objective as though a Heroic Strike had been rolled.
Clash 5: Flanking Manoeuvres
Positioning is everything in warfare. Surrounding the foe, cutting off their retreat, removing their supply lines... this is how a campaign is won.
Designer's Note: Flipping Quadrants. The map below assumes that the Primary Strategic Objectives are placed in the top-right and bottom-left quadrants of the map. If they are placed in the top-left and bottom-right, mirror the deployment zones so that neither General has an objective marker in their deployment zone.
- Terrain. Divide the Battlefield into four equal quadrants, as shown on the map. Then set up Terrain following the standard rules. In addition, place three Strategic Objective Markers. The first is placed in the centre of the Battlefield; this is the Secondary Strategic Objective. Then, another Strategic Objective Marker is placed in the centre of two diagonally opposite quadrants. These are the Primary Strategic Objectives.
- Deployment. Each General's Deployment Zone is a triangle that spans the width of the Battlefield and runs from one corner to the Midway Line, as shown on the map. Deploy Forces using the standard Deployment rules.
- Game Length. This Clash lasts for five Rounds.
Clash Objective: Envelop the Foe. During the End Phase of each Round, each General can score Victory Points by controlling Strategic Objectives. The number of Victory Points scored depends on the Force Scale. In addition, controlling both Primary Objectives at the same time scores more points than controlling them both separately.
| Force Scale | Controlling Both Primary Objectives | Controlling One Primary Objective | Controlling the Secondary Objective |
|---|---|---|---|
| Skirmish | 7 | 3 | 1 |
| Battle | 9 | 4 | 2 |
| Cataclysm | 11 | 5 | 3 |